Premier Pro shuts down the second I mouse over the preview of an asset. Whats wrong?

I am new to Premier Pro and am using a Mac Book Air with Windows installed.
As soon as I create a new project and import the assets (the "Eagles Documentary" example), the whole thing shuts down when I mouse over the assets to see them move.
Any ideas???

Please provide the system info and other data points requested here: FAQ: What information should I provide when asking a question on this forum?

Similar Messages

My MacBook Pro shuts down within seconds after starting with a Gray Screen and Apple Logo, a bar comes at the bottom.

My MacBook Pro starts with a Gray Screen and Apple Logo, a bar comes at the bottom, but after few seconds the machine shuts down. This was bought approx 1 year back. Please help!!

jayanta.ray,
which model MacBook Pro do you have (did you buy it new?), and which version of OS X is installed on it?

Late 2008 Macbook Pro shutting down at 94% while running on the battery

So I called Apple about this issue last week, since I tried calibrating my battery to improve it's health. And when my battery life got down to 94% or lower... my laptop just shut down. For no reason. When I called Apple, the guy I talked to before said it sounded like my battery was defective. He hooked me up to a tech guy, and when I told him what was up, he said that all the numbers on my battery sounded normal, and that he thinks that my logic board is failing. I'm not entirely sure what is up. These are the numbers I am getting now, one from iStat Pro, and the other from System Profiler:
http://i1202.photobucket.com/albums/bb376/setsuna108/Real%20Me/Screenshot2012-03 -05at95132PM.png
http://i1202.photobucket.com/albums/bb376/setsuna108/Real%20Me/Screenshot2012-03 -05at100154PM.png
I had my laptop plugged in all day, but I unplugged it for like, 2 seconds because the LED light on my 85w Magsafe Adaptor was out again... just from bumping it. It was at 82% battery health yesterday, and was fully charged. The battery, as well as the adaptor and laptop are a little over 2 years old. My battery health has been declining since January... it was at 86% health at the end of January, near the beginning of February... then a few weeks into February, it went down to 84%, then 81%... up to 82%, and now down to 79% health. What on earth is going on? Do I need to get a new battery along with a logic board replacement?

Software update to 10.6.8 fully?
Reinstall 10.6 only then Software update fully?
You can do that by backing up data off the machine and disconnecting, then c boot off the 10.6 disk, just reinstall OS X over the more recent copy, then reboot holding shift key down (precaution) then Software update fully to 10.6.8.
then you'll have to check all third party software to make sure it's running, some install kext (kernel extension) files into OS X which get booted out by the overwrite install method, so install those again from fresh sources.
If that doesnt' fix your issue then it's a firmware or hardware issue..
run a hardware test
https://support.apple.com/kb/ht1509
For the "D" you need a internet connection previously (don't move if on wifi) and hold that D down for quite some time.

Mac pro shuts down 5 seconds after first time starting up

my new mac pro won`t start up properly, I push the start button, the start up image appears on my display and 5 seconds later the computer shuts down without any visible reason or notification. It`s a Mac Pro bought in the US and I`m trying to use it in Europe...
I`ll appreciate any advice you can give me!

Try a SMC reset.
DALE

MacBook Pro shuts down as soon as I unplug the power

Help,
As soon as I unplug the power of my MacBook Pro, it shuts down, and all of my unsaved stuff is lost. Anyone got a soloution?
PS Is the battery user replaceable? I am using the Mid-2010 model.

No, that battery is not really user-replaceable. What numbers do you see for that battery in Apple symbol/About this Mac/More Info/System Report/Power? (Especially the Charge and Health Information.)

Premier Pro shut down

Hello, big problem With premier Pro CC. Today When I try to open a project than usually I work with, Premier pro CC shut down immediatly.
What's up ?
Thank you to your support.
Laurent.

See reply #1 at http://forums.adobe.com/thread/1405632?tstart=0

Premier Pro Shuts Down when trying to EXPORT

I am a new editor, only at it for a couple month now. The problem I have is when I attempt to export, Adobe closes without warning.
I have exported in the past, what I do is, set a work area or just highlight a clip, go to FILE: EXPORT: ADOBE MEDIA ENCODER. I have had no problems until a couple days ago. Now when I click ADOBE MEDIA ENCODER the program closes completely and shuts down.
I am using a MATROX RTX2 and the same thing happens when I try to export using MATROX MEDIA ENCODER.
I can however export just using MOVIE but it looks like crap and I am using HDV..
Help?? Suggestions?

Thanks, I'll have to give that a try if there isn't an easier answer out there somewhere. If I pull the card will I have to reload the software and drivers?
If my project is saved and I have a copy of the project saved will I be able to reload Adobe without losing anything? What I mean is will I be able to just import my whole project once reloaded?
I just don't understand what could have happened, since I was doing this with no problem a couple of days ago.
Thanks for your help, it's greatly appreciated.
Tim

Computer shuts down 5 seconds after mouse stops moving

As soon as the computer turns on it comes up with the shutdown/restart box. Have to press escape to cancel the shutdown. If the mouse is moving it is fine but as soon as it stops, 5 seconds later the box comes up and tries to restart. If I let it, it restarts and happens again.
Any ideas?

Try a SMC reset.
DALE

My girlfriends Macbook Pro shuts down at the Apple Logo....

My girlfriends Macbook Pro shuts down at the Apple Logo....
1)I start the computer
2)It loads to the apple logo
3)A progress bar shows and loads about 5% then it dissappears and a few seconds later the macbook pro shuts down.
Any solutions?
If not, is there any way for me to reinstall the os without losing any files such as(any of her pictures, music, etc)?

Hi S,
See if you can run Repair Disk: Boot frominstall disc (insert disc > restart > immediately hold down c key andkeep holding it until you see “Preparing Installation”) > at first screenselect the language and click Continue > click on the Utilities Menu in themenu bar > open Disk Utility > select your HD in the panel on the leftside> click Repair Disk at bottom of main window. Run this at least twice,and keep running it until it says “appears ok” twice in a row. If that doesn’thappen, you may need a stronger utility such as DiskWarrior or if the directoryis damaged beyond repair, you may need to reinstall the OS, or you may have a damagedHD (repair utilities can only repair the directory structure, not the HDitself). When this is finished, quit Disk Utility, quit the installer, andrestart. Once booted normally, go to Applications > Utilities > DiskUtility and run Repair Permissions.

On starting up, my macbook pro shuts down after 25 seconds of booting up.

Hi there. On starting up, my macbook pro shuts down after 25 seconds of booting up. The time bar comes on for a while before it simply goes blank and switches off without any notification. Battery iappears charged. Could it be a virus? Help please!! O

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.

BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton

'Sorry a serious error has occured that requires Adobe Premiere Pro to shut down. We will attempt to save your current project'. What is the solution? (Mac)

There is an error that says when I am open my project: 'Sorry a serious error has occured that requires Adobe Premiere Pro to shut down. We will attempt to save your current project'. What is the solution? (mac)

This happens to me all the time too. When I attempt to reopen, it makes a "copy of" my project. This is frustrating and happiness often.

MacBook Pro shuts down when i close the lid

Hey,
My MacBook Pro shuts down when i close the lid.
It started to do this one or two times, but now it is every time.
I have the latest battery update, so this should not be the issue here..
Any sugestions??
I have started to suspect the it might be some faulty conecctions or somthing..

If it's unable to go into the proper sleep state for some reason then it will do that.
Run /Utilities/Console and click 'All Messages' top left then close the lid, wait a minute then open it again - if it's shut down then reboot and open Console again and check the latest log lines looking for 'sleepimage' - it should give you an indication of what happened/didn't. If you're not sure what it all means post _just those lines_ here.

My macbook pro shuts down OSX and all my programs when the lid is closed

Hi,
I am having a problem. My macbook pro shuts down OSX and all my programs when the lid is closed. I close the lid, and then I hear the shutdown music and then when I open it again it automatically restarts OSX and all my windows and programs are closed, any info gone.
This doesn't happen all the time. Just once a day or maybe twice a day. It seems like it happens basically when I have my computer just the way I want it, to keep an eye on things for the day.
I just recently switched to a mac and while somewhat savvy, I am not a programmer or techie, but it seems to me that when I shut the lid, it should do the same thing every time.
I have a intel core 2 duo 17 inch macbook pro with 2.33 processr and 2 gig ram, if that helps.
I am in alaska and there is no genius bar here and I am hoping to figure this out before I begin bugging our local independant mac store about this.
Thanks in advance,
Lylah
17 inch Macbook Pro Mac OS X (10.4.9) intel core 2 duo 2.33g. 2 gig ram

Ahhh, enlightenment!
That would make sense. What I usually do, after closing the lid, is to wait for the apple to turn off and then set it down on it's side leaning it against the side table. I will try to wait for it to indicate that it is fully asleep before I move it next time. Personally, I prefer my computer to NOT fall asleep at all, but I am told it is not an option. Apparently this function is hardware related accoring to my local mac shop. They tracked it down for me because I hated this feature when I first bought my computer and was trying some way around it.
The shutdown music I was refering to was that music the mac makes when shutting down, which doesnt usually occur when it goes to sleep, unless it is malfunctioning like this.
What does resetting the pmu do? (what is a pmu as well?)
Thank you very much.
Lylah

My Mac Pro shuts down prematurely. Seems the battery drains almost instantaneously, once it hits about 50% or less.

My Mac Book Pro shuts down prematurely, seemingly doing a rapid battery drain when it reaches < 45%. I can only work, while on battery for approximately 15 minutes even when starting out fully charged. Although, a full charge now only reached 95% - 97%. Can't recall if it ever reached 100. Looks like the battery has about 240 cycles on it. I thought at first it was over heating, but now not so sure. Heat may be normal levels. Does this mean it is time for a new battery?

Apple menu > About this Mac > more information
scroll down to Power and click
look for Battery Health Information, Cycle count and condition.
Also
Reset your SMC and NVRAM/PRAM
http://support.apple.com/kb/HT1379
http://support.apple.com/kb/ht3964

Premier Pro shuts down the second I mouse over the preview of an asset. Whats wrong?

Similar Messages

Maybe you are looking for