Premiere Pro CC won't render and Encoder freezes at 50%

I'm trying to render a multicam project.  Up until 2 days ago, I could render projects out fine.  Now, if attempting to render with Premiere, the project stays at 0% indefinitely.  If I queue the project in Encoder, it gets to 50%, then just stops any progress in the render but continues to count the time elapsed.  I recently added a Samsung printer to my computer, so I uninstalled all of those pieces of software but still the same results.  The project was created on the previous version of Premiere before the latest update to CC.  It created a new save file and the project opens up fine, with all other functions still available.  
I'm running on a Intel Zeon 3.47GHz processor, 14GB ram, gpu acceleration card, 2 gig video card.
Any ideas would be appreciated.  Thanks in advance.

The benefit's of two pass are dubious, at best.  I recommend bypassing that second pass and just go with one pass encoding.  It's faster and chances are no one would be able to tell any difference.  (Plus, it'll probably work.)

Similar Messages

  • Premiere Pro trial won't download and it isn't listed in my creative cloud

    Premiere Pro trial won't download and it isn't listed in my creative cloud. It is frustrating... it says it is downloading but it makes creative cloud pop up and I then can't find it listed . I just want the trial. I have done trouble shooting on cchromeand on my computer.

    See if your machine meets the system requirements for the software.  CC will not list applications that will not work with the system.
    Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

  • Premiere Pro CS4 won't render my sequences

    Everytime I send a sequence to Media Encoder, it just sits there. And sits and sits, etc. At the bottom it just says "Loading "Gleaner_Shoot.prproj".
    I'm using a 2008 Mac with 8 cores with 16 gigs of ram.
    My footage came from the Canon HV20. I have clips at both 24p and 1080i.
    I'm setting up my sequences to match the clips I'm placing in them.
    One thing of note is I'm really only using 3 looong clips. Since CS4 doesn't do scene detection well. I opted to instead make subclips from the long clips and use those. 2 of them are about 30 minutes long and one is nearly an hour. Could this be the problem?
    Thing is, this happens even when I do a 1-minute sequence test.
    It even happens when I try to use a test sequence which contains only audio.
    I've tried outputting to quicktime and MPEG 2. I was careful to set the export settings to match the sources.
    After a long wait, Media Encoder gives up and I get a warning icon in the status column.  It says this:
    " - Source File: /Users/johnstanowski/Library/Caches/TemporaryItems/FixThrive_1.prproj
    - Output File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/Fixthrive_1.mov
    - Preset Used: Custom
    - Video: 720x480, 30 [fps], Progressive, Quality 100
    - Audio: 
    - Bitrate: None
    - Encoding Time: 00:01:19
    Wed Dec  3 10:46:04 2008 : Encoding Failed
    The Operation was interrupted by user
    - Source File: /Users/johnstanowski/Library/Caches/TemporaryItems/Thrive2.mov.prproj
    - Output File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/Thrive2.mov
    - Preset Used: Custom
    - Video: 720x480, 29.97 [fps], Progressive, Quality 100
    - Audio: 
    - Bitrate: DV/DVCPRO - NTSC
    - Encoding Time: 00:00:15
    Wed Dec  3 10:50:39 2008 : Encoding Failed
    The Operation was interrupted by user
    - Source File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/_Front Flash/FLASH/SOURCES/BREVITY RENDER READY.mov
    - Output File: /Volumes/Data HD/WEBSITES/BREVITY/3d stuff/_Front Flash/FLASH/FLASH FILES/brevity_render_ready.flv
    - Preset Used: Custom
    - Video: 903x250, Same as source [fps]
    - Audio: MPEG Layer III (MP3), 128 [kbps], Stereo
    - Bitrate: VBR, 1000.00 [kbps]
    - Encoding Time: 00:01:38
    Tue Dec 16 16:44:27 2008 : Encoding Failed
    The Operation was interrupted by user
    - Source File: /Users/johnstanowski/Library/Caches/TemporaryItems/Gleaner_Shoot.prproj
    - Output File: /Users/johnstanowski/Desktop/THURDAY.mov
    - Preset Used: Custom
    - Video: 
    - Audio: 
    - Bitrate: 
    - Encoding Time: 00:11:07
    Tue Aug  4 13:19:39 2009 : Encoding Failed
    Could not read from the source. Please check if it has moved or been deleted.
    I usually use After Effects so I'm not really up on Premiere that much, but I've used it a good bit in the past and never came across this problem.
    Any ideas?

    Thanks.  I hope I've provided enough information below.
    Premiere Pro CS4 (just recently upgraded from CS3 where this session was orignally created)
    Dell Precision t5400
    Intel Xeon E5400 2.33 Ghz
    3.25G RAM
    XP Pro
    Virtual Memory is tweaked per the optimization article on Adobe site:
    sytem RAM + 12MB
    2 x system RAM
    Hardware Acceleration - disabled in display properties
    project is 6 min 30 sec
    no fancy edits....standard audio/video transitions only:
    cross dissolve
    additive dissoolve
    band wipe
    darn door wipe
    audio x fade
    audio fade out
    audio fade in
    VT1:
    AVI video clips
    BMP stills
    1 JPG still
    VT2:
    credits roll at the end over still shot bmp
    AT1:
    voice over in WAV
    using sidekick 4.1 to trigger the compression on AT2
    EQ
    de-clicker
    AT2:
    music backing track in MP3
    using sidekick 4.1 triggered compression (ducking) from AT1
    Using the default PPR4 workspace layout
    Very basic edits in a 6 min training video
    Using Export>Media>AVI output (compressed) and stereo.  My sytem hangs in Media Encoder.  I let it sit for 20 minutes before I manually stopped.
    Thanks,
    Kyle

  • Premiere Pro CC won't load and I can't uninstall it.

    Hi, I was using Premiere Pro yesterday and it worked fine. I haven't done any updates or anything. Today I tried to use the software and it doesn't even load the logo. As soon as I open Premiere, Adobe's App Manager pops up on the dock and then goes away. Premier Pro stops loading soon after that.
    I'm trying to uninstall the program and it's not even responding. I don't know what else to do......
    I'm using a 2011 IMac with OSX Version 10.9.4.

    Maybe this will help, see post 6.
    Premiere CC 2014 won't open at all!  Help

  • Premiere Pro CS5 won't Render. Freezes for 1-2 minutes when I try to edit the timeline.. Help!

    Hi Guys
    I'm new to this, but in desperate need of help. Thought i'd give it a shot and let you know what my problem is!
    Basically i'm editing a dance concert which is approx 2 hours long. I'm running a late 2011 model iMac w/ i7 Quadcore and 16GB of RAM.
    Using Sony XDCAM EX 1080p footage (2 cameras). Everything was going so well until I rendered (not export) the footage overnight. It only rendered less than half of the footage and won't allow me to render anymore.  Doesn't even show the details of the amount of frames.. estimated time etc.
    Heres a screen shot -
    I checked my hard drive space and there's 150 GB left so there's more than enough for it render.
    Another problem is that any editing i do to the timeline whether it's trimming, moving, copying etc. It just lags / freezes for about 1-2 minutes (has the loading Icon) then goes back to normal.
    Before I did the rendering last night, everything was fine. I was able to edit very smoothly without any lag or freezing. First time i've encountered this. I did the same production last year using the same cameras, file format and software version and it was fine.
    Any help would be greatly appreciated!
    Kind regards,
    Jeremy

    Remove the gaps in your timeline  or fill the gaps with black clips and try again.

  • Premiere Pro CC won't render single frame cuts.

    I'm cutting a corporate video with a glitchy treatment, so there are tons of shots that are only held for a single (or two) frames. When I want to render, the render sometimes only goes up to the single frame cut and then stops. No error messages. It doesn't crash (If I press cancel, it immediately puts me back into editing mode, with everything up to the single frame rendered). It just stops rendering.
    What gives? Help! D:
    Pieter

    OK.
    Let's see a bit of the sequence where the issue lies.

  • After download and installation, InDesign, Flash, Dreamweaver and Premiere Pro all won't fully launch.

    After download and installation, InDesign, Flash, Dreamweaver and Premiere Pro all won't fully launch. From the Windows icon pane, I click on the program, it opens the Sign In Required pane, I sign in, it opens the Thank You pane and reverts back to Sign In pane or never opens the program.
    Acrobat also keeps giving me a popup to sign in, each time I look at a .pdf file.
    I have tried uninstalling Acrobat and then redownloading. It didn't work.
    Anyone else find a fix?

    Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
    -and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

  • Premiere Pro cc won't publish working video...

    I've added two videos .wmv files with small edits and am trying to export>media>wmv.. PP takes the time to encode but when finished the video doesn't work. Any ideas? The finished video will load in media player but immediately end.

    This forum contains my exact issue: getting After Effects to recognize a codec; however, I am using premiere pro cc. It doesn't matter what settings I use, I have tried multiple in all have the same result, Media encoder or premiere pro cc will not complete the encoding process it will just fail. I have tried to change the original file to MOV and MP4, still doesn't work.

  • HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

    HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

    Hi,
    Can you confirm that you have an Officejet 8500a or Officejet 8500? On the 8500a model, you can set the networks proxy address and port setting from the front panel of the printer (setup>Webservices setup>proxy). If you are unsure what your proxy settings are you'll need to contact your network admin. If your network uses a proxy users name and password for all devices, you need to enter this information along with the proxy address and port in the printers embedded web server. Type the products IP address into an internet brownser window (printer must be connected to the same network as PC). Select the network tab, and than look for the proxy settings option. Enter in the information and click apply. Once the networks proxy information has been correctly inputed into the embedded web server, try printing again. If unsuccessfully, you might try reinstalling the printer software after uninstalling it. Hope this helps!
    I was an HP employee
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

  • Adobe Premiere Pro CC 2014 keeps lagging and crashing

    My Adobe Premiere Pro CC 2014 keeps lagging and crashing to a point where I cannot do my job. When I open my premiere file, I can work on my timeline for maybe two or three minutes before it lags, freezes, and then finally crashes. I'm at a loss of what exactly is causing my problem because I edit primarily H.264 files and my sequences are not complex in any sense of the word. I've been dealing with this for days and I cannot seem to find a solution. If anyone has any advice please let me know because I am desperate. Thank you.
    Specs:
      Model Name: Mac Pro
      Model Identifier: MacPro6,1
      Processor Name: Quad-Core Intel Xeon E5
      Processor Speed: 3.7 GHz
      Number of Processors: 1
      Total Number of Cores: 4
      L2 Cache (per Core): 256 KB
      L3 Cache: 10 MB
      Memory: 16 GB
      Boot ROM Version: MP61.0116.B05
      SMC Version (system): 2.20f18
      Illumination Version: 1.4a6

    Hi Dana,
    Can you go to File-Project Settings-General and change the video renderer to Software Only Mode.
    Check if that works or not.
    Are you using any third party plug-in's for Premiere Pro?
    Thank You
    Arjun

  • HELP! Jerky playback on Premiere Pro 6.0.2 CS6 and Retina MBP (16GB)

    Dear all!
    Please help me to solve this problem!
    It's going on Premiere Pro 6.0.2 CS6 and Retina MBP with 16GB RAM installed.
    CUDA Driver Version: 5.0.24
    MacBook Pro Retina, Mid 2012
    Processor  2,7 GHz Intel Core i7
    Memory  16 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GT 650M 1024 MB
    Software  OS X 10.8.1 (12B19)
    Adobe Premiere Pro CS6 (6.0.2. - 072)
    While playing back inside PP a jerky playback occurs, every 1-2 seconds it rewinds to 2-3 frames back and continues to play forth...
    No special console messages or something similar visible.
    Have tried to clean the cache but it doesn't help. Also have tried to switch the mode between CUDA, OpenCL and SW - without any visible changes...
    Exhausted... Please HELP!!!!

    avrbox, I had the same problem and went crazy because I didn't find a proper solution. I use Windows, though. Finally, I got to fix the problem. I use a i5 processor, which I overclocked with an asrock tool that came with the mainboard (to about 3350 MHZ where the system ran stable). When I turned overclocking off, Premiere played back the clips just fine. I overclocked then step by step until the playback went jerky again and kept that frequency. Maybe your processor is overclocked by stock or you did it manually?
    Hope this is your solution!

  • Smart Rendering in Premiere Pro CS6 (6.0.1, and later)

    Hi,
    I just wrote a blog post about how smart rendering works in Premiere Pro CS6 (6.0.1, and later). Let me know if you have any questions.
    Blog post is here.

    ECBowen wrote:
    BTW is there a similar type blog link on how the hardware MPE engine works that you can also link. There is allot of confusion about that and any information we would give would be 2nd hand or deduction.
    Eric
    ADK
    Try this blog post, "CUDA, OpenCL, Mercury Playback Engine, and Adobe Premiere Pro"

  • If I purchase or subscribe to creative cloud, will this include adobe premiere pro, after effects, photoshop, illustrator and audition?

    If I purchase or subscribe to creative cloud, will this include adobe premiere pro, after effects, photoshop, illustrator and audition?

    Here is a link to a page that shows all of the Cloud applications...
    All Cloud Applications:  http://www.adobe.com/creativecloud/catalog/desktop.html

  • Premiere Pro 2.0 compatable video and audio formats

    I am working on a project that uses old vintage newreel clips and such from the 50's and 60's, they are available for download in several different formats.
    I have downloaded many of them but when i import them into my timeline, there is no audio for these clips. They work when i just play them out of premiere. What are the supported formats for premiere pro 2 both in video and audio?
    I have made several movies but haven't come upon this issue before.

    Welcome to the forums.
    The following links will help you:
    FAQ: How do I import xyz format files?
    FAQ:How do I convert my files?
    FAQ:Why is there no audio in my imported MPEG file?
    Cheers
    Eddie

  • TS3938 logic pro 7 won't open and power pc applications are no longer supported appears, can anyone help?

    logic pro 7 won't open and power PC applications are no longer supported appears, can anyone help?

    You'll have to update Logic Pro.

Maybe you are looking for