Prerequirement check failed on Oracle Express while installing EM
Hi,
I am not an expert of EM or Database.
During the installation (I choosed the option if installing on an existing database) got a warning from the installer saying:
session_cached_cursor must be greater then 200
job_queue_processes greater than 10
I put this setting in init.ora of an express database on Linux, but I got the same error trying installing again.
Where I have to change those values?
Thanks much.
These may be simple questions, but here goes. Did you bounce the database after changing the settings in init.ora? Are you possibly using an spfile instead of init.ora? Check select * from v$parameter where name = 'spfile'; and if there is a file returned, you will need to to and alter session, scope=both in order to affect the change.
Similar Messages
-
Root.sh failed on second node while installing CRS 10g on centos 5.5
root.sh failed on second node while installing CRS 10g
Hi all,
I am able to install Oracle 10g RAC clusterware on first node of the cluster. However, when I run the root.sh script as root
user on second node of the cluster, it fails with following error message:
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
and run cluvfy stage -post hwos -n all -verbose,it show message:
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking shared storage accessibility...
Disk Sharing Nodes (2 in count)
/dev/sda db2 db1
and run cluvfy stage -pre crsinst -n all -verbose,it show message:
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking system requirements for 'crs'...
No checks registered for this product.
and run cluvfy stage -post crsinst -n all -verbose,it show message:
Result: Node reachability check passed from node "DB2".
Result: User equivalence check passed for user "oracle".
Node Name CRS daemon CSS daemon EVM daemon
db2 no no no
db1 yes yes yes
Check: Health of CRS
Node Name CRS OK?
db1 unknown
Result: CRS health check failed.
check crsd.log and show message:
clsc_connect: (0x143ca610) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_db2_crs))
clsssInitNative: connect failed, rc 9
Any help would be greatly appreciated.
Edited by: 868121 on 2011-6-24 上午12:31Hello, it took a little searching, but I found this in a note in the GRID installation guide for Linux/UNIX:
Public IP addresses and virtual IP addresses must be in the same subnet.
In your case, you are using two different subnets for the VIPs. -
Re-config of ssh fails after changing Oracle Home while installing RAC
Hi,
Red Hat Linux 5
Oracle 10.2.0.1 RAC installation
While installing Oracle RAC under ORACLE user we are Configuring ssh for the first time works fine. If any changes done (Eg: i changed the home path of oracle user), then the ssh configuration will prompt for password no matter how many times you reconfigure the ssh.
I have created another OS user orclusr instead of oracle to over come this issue
Have any one came across this situation or finds a solution, please reply back.
Regards
hari
Edited by: hariharan.thyagarajan on Apr 8, 2010 12:33 PMhariharan.thyagarajan wrote:
Hi,
One of the most important reasons for building Real Application Clusters is stability.
Changing the Oracle Home, after the cluster is built is about 180 degrees counter to this philosophy.
I agree with this but we face the error while installing oracle cluster
here is my scenario:
create oracle user on both the nodes(rac1,rac2):
1) my first oracle home - /home/oraclePart of thinking these things through before proceeding is to recognize that the concept of ORACLE_HOME is not the same as the $HOME directory for the OS user who happens to be named "oracle".
Since you appear to be still in the process of building this system, I'd suggest you go back to square one while you can.
2) configure ssh on both the nodes
3) due to sapce constraint in /home mount point we changed the oracle home to /oracle
4) so my new oracle home is /oracle
5) re-configuring of ssh is working fine, no error's
6) but if i issue the below command ssg date rac2 it prompts for password why ?
Any possibility to over come this issue ?
Regards
hari
Edited by: hariharan.thyagarajan on Apr 8, 2010 1:14 PM -
How to check for Optional Oracle 10gR2 components installed?
Hi
How can I get a list of all optional oracle database components/features installed (some of them may require additional license)? I was going through list of directory objects in a database and I spotted "ORACLE_OCM_CONFIG_DIR" in one of the databases (others don't have it). When I checked, it turned out to be a directory required for Oracle Configuration Manager (this may even be a totally separate install).
I have to configure a new oracle database server where I have to install whatever is installed on an existing one.
Oracle 10gR2 - RHEL 5.8
Please advise!
Best regardsThanks for your response. I just checked the output and "Oracle Configuration Manager" is not listed.
EM
Oracle Enterprise Manager
10.2.0.5.0
VALID
EXF
Oracle Expression Filter
10.2.0.5.0
VALID
SDO
Spatial
10.2.0.5.0
VALID
ORDIM
Oracle interMedia
10.2.0.5.0
VALID
AMD
OLAP Catalog
10.2.0.5.0
VALID
XDB
Oracle XML Database
10.2.0.5.0
VALID
CONTEXT
Oracle Text
10.2.0.5.0
VALID
OWM
Oracle Workspace Manager
10.2.0.5.0
VALID
ODM
Oracle Data Mining
10.2.0.5.0
VALID
CATALOG
Oracle Database Catalog Views
10.2.0.5.0
VALID
CATPROC
Oracle Database Packages and Types
10.2.0.5.0
VALID
JAVAVM
JServer JAVA Virtual Machine
10.2.0.5.0
VALID
XML
Oracle XDK
10.2.0.5.0
VALID
CATJAVA
Oracle Database Java Packages
10.2.0.5.0
VALID
APS
OLAP Analytic Workspace
10.2.0.5.0
VALID
XOQ
Oracle OLAP API
10.2.0.5.0
VALID
So there may be more that are not listed but installed.
Best regards -
I am having trouble installing SQL 2008 Small Business Edition on top of MS 2008 std from the SBS premium suite. I recieve the SQL Server 2008 R2 setup log error stateing "Operating system supported for edition "Failed". The specific error is "EditionRequirementCheck
Failed" This SQL server edition is not supported on this operating system.
The SQL 2008 server is a valid SBS domain member server and sees the SBS domain just fine. I have tried re-installing the OS. Not selecting any options except the SQL engine, verbose logging as per How to diagnose "Operating system supported for edition"
pre-requisite errors while installing SQL 2008 Standard Edition for Small Business with no success. (no log.txt generated), enabled browsing, and other items with no luck.
I got the software from MVLS under the specific SBS 2011 premium section. It doesnt seem right or sees something to keep it from installing. The SBS AD box is clean with all FSMO and root functions assigned to it. There are no trust relationships or
child domains. I have licenses for 75 users. Of course there is no tool, log or utility to find what the actual issue the SQL installation is seeing. SOS! Help!!!I meet all prerequisites that can be verified.
I am installing it on the SBS Premium Server 2008 R2 OS from MVLS with the ISO file ending in 29732.
I am on a valid SBS 2011 domain.
The new SQL box is joined to the domain as a member server.
THe SBS server contains alll FSMO roles and is the root of the AD.
There are no trust relationships or child domains.
There is NO way that I can find to determine the number of user and device licenses that it "senses" on the domain. I dont know which ones to count. I am licensed for 75 users and have less than that useing the network. There is no licensing monitor or meathod
I can find to actually verify what the SQL install sees.
I am doing all this logged in as the domain admin.
The troubleshooting steps at the bottom of the post refrenced do not work or I am doing them wrong. I cannot find an output file when I enable verbose logging for the SQL install. I believe if I figure out how it may point the way to the block. Thanks -
ORACLE ERROR WHILE INSTALLING SAP DATABASE INSTANT
HI
this is rahul
Iam facing some problem while installing SAP DATABASE INSTANCE with error code ORA-01092 instance terminated with forced at the stage of database building
please help me
urgently
urgentlyHi Rahul,
It will be useful if you can send the error message which can be found in the oracle alert log.That information will be helpful to findout the solution.
Oracle alert file can be found in oracle/<SID>/saptrace/background
with name alert<SID>.log -
How to check whether a Oracle server is installed or not ?
Hi,
How cani check whether a Machine has oracle server installed or not ?
I have a machine where i have the client tools installed but not server. In that case how can i check whether this machine has oracle server is installed or not?
Thanks in Advance..user11000236 wrote:
Hi,
How cani check whether a Machine has oracle server installed or not ?
I have a machine where i have the client tools installed but not server. In that case how can i check whether this machine has oracle server is installed or not?
Thanks in Advance..http://tinyurl.com/ngunhv
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/] -
Pre-install system check fails in Oracle apps R12i
Hi,
I am trying to install Oracle apps 12i on a fresh Windows 2003 system with suitable hardware (1.5 GB ram & 250 GB HD)
I am recieving the error :
System Utilities
command: cmd.exe /c D:\downloads\OracleAppsR12I\Extract\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\cygwin\bin d:\Tools\MSVC\VC98
D:\downloads\OracleAppsR12I\Extract\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
cl: Command not found.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
This is the setup I have done :
Installed Visual C++ express edition in the direcory :
D:\Tools\MSVC
Installed cygwin in directory :
C:\cygwin\bin
From Command prompt things seem to be OK :
D:\>which cl
/cygdrive/d/Tools/MSVC/VC98/VC/bin/cl
D:\>echo %path%
C:\Perl\site\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\
Wbem;C:\cygwin\bin;D:\Tools\MSVC\VC98\VC\bin;D:\Tools\MSVC\VC98\Common7\IDE
D:\>which gnumake
/usr/bin/gnumake
gnumake.exe is located in directory C:\cygwin\bin
I followed steps from forum that describes installation of Oracle apps 11i :
http://forums.oracle.com/forums/thread.jspa?messageID=1566573
I would appreciate if anybody can advise what are the possible causes of the above problem
Regards
AKI am able to install oracle ebs successfully, but not able to open the home page. Error coming is "ip address not found".Can you ping the IP address, hostname.domainname?
According to me the issue is that my server is on workgroup and not on any domain. I have given the domain name When installer was asking for domain name. I have also modified the host file for the same.Could you please post the contents of the hosts file here (you may edit the hostname/domainname values to something different as we need to see the format of the entries).
Now i have two options:
1. If i put the server on the domain which is passed to installer when asked.
2. Now, what all i can do to login on application with keeping the server on workgroup.You do not have to join any domain, and you can simply set this from:
- Right click on 'My Computer' > Properties > 'Computer Name' > Change
- Set 'Computer Name' to <hostname>
- Click on More
- Set a 'Primary DNS Suffix of this Computer' to <domainname.com>
thanks for your prompt reply to my previous post. I really admire your work on forums.You are welcome :)
Thanks,
Hussein -
Validity check failed of oracle-sqldeveloper
Hello Folks,
I have tried to install the "oracle-sqldeveloper" of the AUR with yaourt from this source Arch Linux Forums
To get the newest version I modified the PKGBUILD of oracle-sqldeveloper.
I change the package version, the url and the the checksums.
The checksums and the other parameters are correct but I got an error when I started building:
==> ERROR: One or more files did not pass the validity check!
==> ERROR: Makepkg was unable to build oracle-sqldeveloper.
I have also tried to download the package from oracle directly and deploy it with a local http-server, but with the same result.
How can I fix that problem?
greetingsYes, it says, that the check for the downloaded file from the oracle site fails, but I generated the checksum with md5sum and sha256sum, but it also fails with the new check sum.
That is true, that I´m new with arch, but I have already worked with makepkg and pacman.
I´m using yaourt, because I need many packages that are not in the official repos.
greetings & thx for your reply -
Hello,
While attempting to update Dreamweaver CC(201) it failed to complete the update. The dialog box suggest to restart the computer, witch I did, but still not updating. Any cue ?
On a MacbookPro, everything from Creative Cloud is fine except two upgrade eg. Dreamweaver CC(2014) and EdgeAnimate CC(2014).
Thank you,Maybe this will help you.
Exit code 15 installing | Mac OS X | CCM, CS6
Nancy O. -
Unable to install oracle 9i while installing second time after uninstalling
Hi buddy
As i installed first oracle 9i, then IIS server, but while running IIS server using localhost, it was not running,moreover oracle page was opened, then i got the solution that , it is becuase of collision of port number of oracle and IIS.
After that i fully uninstalled the oracle 9i, then again i installed IIS server, got success: but when i m trying to install oracle 9i again, showing an error message i-e JAVA RUNTIME ENVIRONMENT NOT FOUND.
for this reason i installed JRE, after all facing same problem, then installed full jdk 1.6 version, Still could not get success
i tried it lots of time, but did not reach to the solution.
Please help me out.
Regards
InamAt Oracle Site we have a very good manual for 9i installation. Follow the manual step-by-step.
Your problem seems as a java or permissions issue.
good luck
Eduardo -
Test connection fail in windows 8 while installing Informatica 9.1 HF2
I had lot of issue hile installing with HF2 in windows 8.The test connection is failed everytime.I created a user and also granted previlages to it.Please help me with this.
Thanks in advance
kaushikI have found the reason for this... Actually i have ANT installed in my system prior to OIM installation... it was the culprit. Build was failing because i have two ANT's (one that comes with OIM and other ANT which is already installed)
I have removed the path and ANT_HOME environment variables.. .and my installation was successful -
Error while installing SAP Enterprise 4.70 for Oracle
Hi all,
While installing R/3 4.7 on Windows 2000 with oracle database ,while installing database instance i encountered the following error message.
CJS - 00084 SQL statement or Script failed
Error Message: Executable D:\oracle\ora92/bin/sqlplus.exe returns 3
FJS - 00012 Error when executing script
I am copying the contents of the sapinst.log and sapinst_dev.log for reference.
sapinst.log:
TRACE
receiving on port 21212
TRACE
sending on port 21213
TRACE
host name is sapsrv
TRACE
effective user corresponds to real user
TRACE
Administrator has SID S-1-5-21-1085031214-413027322-839522115-500
TRACE
account Administrator exists with parameter domain="SAPSRV"
TRACE
existence check for user Administrator returned true.
TRACE
inserted account (Administrator, S-1-5-21-1085031214-413027322-839522115-500, USER) into the accountcache.
TRACE
java has been started with the following command line: "C:\j2sdk1.4.2_15\bin\javaw.exe" -cp jar\instgui.jar;jar\inqmyxml.jar -Dsun.java2d.noddraw=true com.sap.ins.gui.Main -port 21212
TRACE
guiengine: waiting for connect on ports 21212 and 21213
TRACE
got notification...
TRACE<i>
got notification...
TRACE
signaling connect answer...
TRACE
releasing notifyLock
TRACE
trying to aquire notifyLock...
TRACE
running...
TRACE
showing dlg diInit
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
releasing notifyLock
TRACE
Opened iaccdlib.dll
TRACE
Calling m_pGui->showLicenseAgreement()
TRACE
got notification...
TRACE
ACTION_OK received
TRACE
releasing notifyLock
TRACE
Opened iamodwas.dll
TRACE
The controller registered the module CIaWapsSystem
TRACE
The controller registered the module CIaWapsInstance
TRACE
The controller registered the module CIaWapsSystem
TRACE
The controller registered the module CIaWapsInstance
TRACE
The controller registered the module CIaWapsDBName
TRACE
The controller registered the module CIaWapsDBName
TRACE
The controller registered the module CIaWapsDBName
TRACE
Opened iamodora.dll
TRACE
The controller registered the module COraInputChecker
TRACE
Opened iamodos.dll
TRACE
The controller registered the module CIaOsPorts
TRACE
The controller registered the module COraInputChecker
TRACE
The controller registered the module COraInputChecker
TRACE
The controller registered the module CIaOsCheckJava
TRACE
The controller registered the module CIaOsCheckJava
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|dAskWhat
TRACE
showing dlg dORA_R3E_What
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
CDialogHandler: ACTION_NEXT requested
TRACE
releasing notifyLock
TRACE
tInstEnv :
TRACE
tInstEnv : tWhat
TRACE
value : INST
TRACE
The step dAskWhat with key R3E|ind|ind|ora|R3E|47|0|dAskWhat has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|dAskInstanceType
TRACE
tInstEnv :
TRACE
tInstEnv : tWhat
TRACE
value : INST
TRACE
tInstEnv :
TRACE
tInstEnv : tWhat
TRACE
value : INST
TRACE
showing dlg d_SAPComponent_InstanceType_ABAP
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
CDialogHandler: ACTION_NEXT requested
TRACE
releasing notifyLock
TRACE
The step dAskInstanceType with key R3E|ind|ind|ora|R3E|47|0|dAskInstanceType has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|dAskDbType
TRACE
tInstEnv :
TRACE
tInstEnv : tWhat
TRACE
value : INST
TRACE
tInstEnv :
TRACE
tInstEnv : tWhat
TRACE
value : DB
TRACE
showing dlg dORA_R3E_dbType
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
CDialogHandler: ACTION_NEXT requested
TRACE
releasing notifyLock
TRACE
The step dAskDbType with key R3E|ind|ind|ora|R3E|47|0|dAskDbType has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|dFillChildContext
TRACE
Opened iamodutl.dll
TRACE
t_SAPComponent_CONTEXT.updateRow(, WHERE ROWNUM=0), inserting
TRACE
The step dFillChildContext with key R3E|ind|ind|ora|R3E|47|0|dFillChildContext has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dSetDbInfoContextParam
TRACE
The step dSetDbInfoContextParam with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dSetDbInfoContextParam has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dGetHostInfo
TRACE
Processing row CONDITION=TRUE HOSTADDRESSES=value(NEEDED) HOSTALIASES=value(NEEDED) HOSTCPUCOUNT=value(NEEDED) HOSTCPUFAMILY=value(NEEDED) HOSTNAME=value(NEEDED) HOSTNAMELENGTH=value(NEEDED) HOSTOSFANAME=value(NEEDED) HOSTOSTYPE=value(NEEDED) HOSTPLATFORM=value(NEEDED) HOSTRAM=value(NEEDED) HOSTSWAP=value(NEEDED) OPMODE=GETINFO
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
INFO 2007-08-14 18:02:32
Processing of host operation t_HostInfo_SHARED succeeded.
TRACE
The step dGetHostInfo with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dGetHostInfo has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dGetCurrentProcessInfo
TRACE
effective user corresponds to real user
TRACE
account Administrator exists with parameter domain="SAPSRV"
TRACE
effective user corresponds to real user
TRACE
account Administrator exists with parameter domain="SAPSRV"
TRACE
account Administrator exists with parameter domain="SAPSRV"
TRACE
t_HostInfo_SHARED.updateRow(, WHERE HostRole='LOCALHOST'), updating
TRACE
The step dGetCurrentProcessInfo with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dGetCurrentProcessInfo has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dCompleteContextWithHostInfo
TRACE
The step dCompleteContextWithHostInfo with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dCompleteContextWithHostInfo has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|makeSystemRowDB
TRACE
t_SAPComponent_Waps_System_SHARED.completeRow(, WHERE WapsSystemName='V11'), inserting
TRACE
t_SAPComponent_Waps_System_SHARED.completeExpression(, WHERE WapsSystemName='V11'), completing
TRACE
The step makeSystemRowDB with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|makeSystemRowDB has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|askForKeyParameters
TRACE
t_SAPComponent_Private.updateRow(, WHERE ROWNUM=0), updating
TRACE
showing dlg d_SAPComponent_DBInstance
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
CDialogHandler: ACTION_NEXT requested
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
releasing notifyLock
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE
t_HostInfo_SHARED.updateRow(, WHERE HostRole='LOCALHOST'), updating
TRACE
The step askForKeyParameters with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|askForKeyParameters has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|cleanTables
TRACE
The step cleanTables with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|cleanTables has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|makeInstanceRow
TRACE
t_SAPComponent_Waps_Instance_SHARED.updateRow(, WHERE WapsSystemName='V11' AND WapsInstanceType='DB' AND WapsInstanceNumber='' AND WapsInstanceHost='sapsrv'), inserting
TRACE
t_SAPComponent_Waps_Instance_SHARED.completeExpression(, WHERE WapsSystemName='V11' AND WapsInstanceType='DB' AND WapsInstanceNumber='' AND WapsInstanceHost='sapsrv'), completing
TRACE
The step makeInstanceRow with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|makeInstanceRow has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dFillContextTablesOfOtherChildren
TRACE
t_SAPComponent_Waps_System_CONTEXT.updateRow(, WHERE ROWNUM=0), inserting
TRACE
t_DatabaseSystem_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
tCheckLibPath_context.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Accounts_CONTEXT.updateRow(, WHERE ROWNUM=0), inserting
TRACE
t_SAPComponent_Exports_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
found a match, deleting rows
TRACE
disabling branch t_SAPComponent_Stop_Services_CONTEXT
TRACE
t_SAPComponent_Filesystem_CONTEXT.updateRow(, WHERE ROWNUM=0), inserting
TRACE
t_SAPComponent_Ports_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Profiles_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
found a match, deleting rows
TRACE
disabling branch t_SAPComponent_Services_CONTEXT
TRACE
found a match, deleting rows
TRACE
disabling branch t_SAPComponent_MMC_CONTEXT
TRACE
found a match, deleting rows
TRACE
disabling branch t_SAPComponent_Program_Items_CONTEXT
TRACE
t_SAPComponent_Archives_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Pre_Steps_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Post_Steps_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_General_Environment_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
found a match, deleting rows
TRACE
disabling branch t_SAPComponent_Permissions_CONTEXT
TRACE
t_DatabaseClient_CONTEXT.updateRow(, WHERE ROWNUM=0), inserting
TRACE
found a match, deleting rows
TRACE
disabling branch t_DatabaseClientDB2_CONTEXT
TRACE
t_DatabaseServer_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_DatabaseLoad_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_DatabasePostLoad_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPInstancePrepare_context.updateRow(, WHERE ROWNUM=0), inserting
TRACE
t_SAPInstanceDbActions_context.updateRow(, WHERE ROWNUM=0), updating
TRACE
found a match, deleting rows
TRACE
disabling branch t_DatabaseExport_context
TRACE
t_SAPComponent_Rfc_Jobs_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
found a match, deleting rows
TRACE
disabling branch t_SAPComponent_InQMy_CONTEXT
TRACE
found a match, deleting rows
TRACE
disabling branch t_SAPComponent_Enable_Java_CONTEXT
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Contexttables_HACK.insertRow(), inserting
TRACE
t_SAPComponent_Waps_System_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
The step dFillContextTablesOfOtherChildren with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|dFillContextTablesOfOtherChildren has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|AskForAbapOrJava
TRACE
The step AskForAbapOrJava with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|AskForAbapOrJava has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|makeCIRow
TRACE
t_SAPComponent_Waps_Instance_SHARED.completeExpression(, WHERE WapsSystemName='V11' AND WapsInstanceType = 'CI'), inserting
TRACE
t_SAPComponent_Waps_Instance_SHARED.updateRow(, WHERE WapsSystemName='V11' AND WapsInstanceType = 'CI'), updating
TRACE
t_SAPComponent_Private.updateRow(, WHERE ROWNUM=0), updating
TRACE
showing dlg d_SAPComponent_CentralInstance
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
CDialogHandler: ACTION_NEXT requested
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
releasing notifyLock
TRACE
t_SAPComponent_Waps_Instance_SHARED.updateRow(, WHERE WapsSystemName='V11' AND WapsInstanceType = 'CI'), updating
TRACE
The step makeCIRow with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|makeCIRow has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|convertExpressions
TRACE
t_SAPComponent_Waps_System_SHARED.updateRow(, WHERE WapsSystemName='V11'), updating
TRACE
The step convertExpressions with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|convertExpressions has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|propagateContext
TRACE
t_SAPComponent_Waps_Instance_Dirs_CONTEXT.updateRow(, WHERE ROWNUM=0), inserting
TRACE
The step propagateContext with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|propagateContext has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|calculateRamDistribution
TRACE
found row
TRACE
found row
TRACE
myPart: 2, allParts: 5
TRACE
t_SAPComponent_Waps_Instance_SHARED.completeRow(, WHERE WapsSystemName='V11' AND WapsInstanceName='' AND WapsInstanceHost='sapsrv'), completing
TRACE
The step calculateRamDistribution with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|calculateRamDistribution has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|invokeHostDialog
TRACE
showing dlg dNT_SAPComponent_Waps_Instance_Hostinfo
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
CDialogHandler: ACTION_NEXT requested
TRACE
releasing notifyLock
TRACE
The step invokeHostDialog with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|invokeHostDialog has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|tweakWindowsDomain
TRACE
t_SAPComponent_Waps_System_SHARED.updateRow(, WHERE WapsSystemName='V11'), updating
TRACE
The step tweakWindowsDomain with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|tweakWindowsDomain has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|completeContexttableHack
TRACE
t_SAPComponent_Waps_System_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_DatabaseSystem_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
tCheckLibPath_context.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Accounts_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Exports_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Filesystem_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Ports_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Profiles_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Archives_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Pre_Steps_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Post_Steps_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_General_Environment_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_DatabaseClient_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_DatabaseServer_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_DatabaseLoad_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_DatabasePostLoad_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPInstancePrepare_context.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPInstanceDbActions_context.updateRow(, WHERE ROWNUM=0), updating
TRACE
t_SAPComponent_Rfc_Jobs_CONTEXT.updateRow(, WHERE ROWNUM=0), updating
TRACE
The step completeContexttableHack with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|completeContexttableHack has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|GetMountInfo
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE[E]
Node F:\ does not exist.
TRACE[E]
Unable to determine used space on drive F:/: The device is not ready.
TRACE[E]
Unable to determine free space on drive F:/: The device is not ready.
TRACE[E]
Unable to get user quota on drive F:/: The device is not ready.
TRACE
t_DriveMapping_SHARED.completeRow(, WHERE WapsSystemName='V11' AND WapsInstanceName='' AND WapsInstanceHost='sapsrv' AND Key='WAPS_SapDir'), inserting
TRACE
t_DriveMapping_SHARED.completeRow(, WHERE WapsSystemName='V11' AND WapsInstanceName='' AND WapsInstanceHost='sapsrv' AND Key='WAPS_SapTransHost'), inserting
TRACE
The step GetMountInfo with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|GetMountInfo has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|InvokeDialog
TRACE
t_DriveMapping_SHARED.updateRow(, WHERE WapsSystemName='V11' AND WapsInstanceName='' AND WapsInstanceHost='sapsrv' AND Key='WAPS_SapDir'), updating
TRACE
Opened iajsmod.dll
INFO 2007-08-14 18:02:38
The 'saploc' share exists at directory 'D:\usr\sap'. Choosing drive D: as SAP System drive.
TRACE
t_SAPComponent_Private.updateRow(, WHERE ROWNUM=0), updating
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE
host name is sapsrv
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
hostname after reverse lookup is: sapsrv
TRACE
showing dlg dNT_SAPComponent_Waps_Instance_Dirinfo
TRACE
waiting for an answer from gui
TRACE
got notification...
TRACE
CDialogHandler: ACTION_NEXT requested
TRACE
host name "sapsrv" added to host entry
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
IP name sapsrv resolves to IP address(es): 192.168.1.22
TRACE
hosts entry has IP address(es): 192.168.1.22
TRACE
IP address "192.168.1.22" added to hosts entry
TRACE
host name "sapsrv" added to host entry
TRACE
IP address 192.168.1.22 resolves to IP name(s): sapsrv
TRACE
hosts entry has host name(es): sapsrv
TRACE
releasing notifyLock
TRACE
t_DriveMapping_SHARED.updateRow(, WHERE WapsSystemName='V11' AND WapsInstanceName='' AND WapsInstanceHost='sapsrv' AND Key='WAPS_SapTransHost'), updating
TRACE
The step InvokeDialog with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|InvokeDialog has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|writeTable
TRACE
t_SAPComponent_Waps_Instance_SHARED.updateExpression(, WHERE WapsSystemName='V11' AND WapsInstanceName='' AND WapsInstanceHost='sapsrv'), updating
TRACE
t_SAPComponent_Waps_Instance_SHARED.updateRow(, WHERE WapsSystemName='V11' AND WapsInstanceName='' AND WapsInstanceHost='sapsrv'), updating
TRACE
The step writeTable with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|SAPComponent_Waps_System|ind|ind|ind|ind|ind|0|SAPComponent_Waps_Instance_Dirs|windows|ind|ind|ind|ind|0|writeTable has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseSystem|ind|ind|ora|ind|ind|0|fillContextOfSubcomponents
TRACE
The step fillContextOfSubcomponents with key R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseSystem|ind|ind|ora|ind|ind|0|fillContextOfSubcomponents has been executed successfully.
TRACE
The controller is about to execute the dialog step R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseSystem|ind|ind|ora|ind|ind|0|DatabaseCommonParameters|ind|ind|ora|ind|ind|0|dialogGetCommonParams
INFO 2007-08-14 18:02:40
Copying file D:/KERNEL/NT/COMMON/OraVolatileDatabaseParameters.xml to: OraVolatileDatabaseParameters.xml.
INFO 2007-08-14 18:02:40
Creating file C:\SAPinst ORACLE KERNEL\OraVolatileDatabaseParameters.xml.
TRACE
Getting OraVolatileDatabaseParameters.xml from CD: D:/KERNEL/NT/COMMON/OraVolatileDatabaseParameters.xml
TRACE
Reading volatile database parameters from 'OraVolatileDatabaseParameters.xml'.
TRACE
tGlobalDbParameters.completeRow(, WHERE dbSid = getContextParameter('dbSid')), completing
TRACE
CDomainObjectCache::readFromKeyDb: Reading from tGlobalDbParameters WHERE dbSid = 'V11'
TRACE
tGlobalDbParameters.updateRow(, WHERE dbSid = getContextParameter('dbSid')), updating
TRACE
tGlobalDbParameters.updateRow(, WHERE dbSid = getContextParameter('dbSid')), updating
TRACE
tORA_DriveSelect.completeRow(, WHERE key = 'sapdataHome'), inserting
TRACE
tORA_DriveSelect.completeRow(, WHERE key = 'oraArch'), inserting
TRACE
<table name="tGlobalDbParameters">
<!--
points to base table :tGlobalDbParameters
belongs to client :R3E|ind|ind|ora|R3E|47|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseSystem|ind|ind|ora|ind|ind|0|DatabaseCommonParameters|ind|ind|ora|ind|ind|0
Row count of client table :1
Row count of base table :1
-->
<columns>
<column name="dbSid"><!-- points to base table attribute :dbSid-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="DbHostname"><!-- points to base table attribute :DbHostname-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="dbServerVersion"><!-- points to base table attribute :dbServerVersion-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="dbServerBit"><!-- points to base table attribute :dbServerBit-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="dbClientVersion"><!-- points to base table attribute :dbClientVersion-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="dbClientBit"><!-- points to base table attribute :dbClientBit-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="dbHome"><!-- points to base table attribute :dbHome-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="dbHomeName"><!-- points to base table attribute :dbHomeName-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="dbSchema"><!-- points to base table attribute :dbSchema-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column>
<column name="OraStageDir"><!-- points to base table attribute :OraStageDir-->
<defaultproperties>
<property name ="CHANGEABLE" value ="YES" />
</defaultproperties>
</column&gand look for
sqlplus.exe returns 3
this should help - issue was posted multiple times -
Hi all,
Pre-installation:
I install the oracle with user "oracle" which belongs to "dba" group.
The environment variables are
PATH=/usr/sbin:/usr/bin:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/platform/SUNW,Ultra-80/sbin:/opt/sun/bin:/opt/SUNWexplo/bin
LD_LIBRARY_PATH=/usr/openwin/lib
OPENWINHOME=/usr/openwin
ORACLE_OWNER=oracle
Also, i created /oracle folder for the installation of oracle
Synonym:
While installing oracle, I was encountered the error in invoking target ntcontab.o of makefile /oracle/OraHome92/network/lib/ins_net_client.mk while installing Oracle 9.2.0.1.0 in Solaris 9 unix machine.
The content of /oracle/OraHome92/install/make.log is as follows
/usr/ccs/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/oracle/OraHome92
(if [ "assemble" = "compile" ] ; then \
/oracle/OraHome92/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /oracle/OraHome92/lib/ntcontab.o ;\
mv ntcontab.o /oracle/OraHome92/lib ;\
/usr/ccs/bin/ar rv /oracle/OraHome92/lib/libn9.a /oracle/OraHome92/lib
/ntcontab.o ; fi)
(if [ "assemble" = "assemble" ] ; then \
/oracle/OraHome92/bin/gennttab > ntcontab.s ;\
/usr/ccs/bin/as -xarch=v9 -P -o ntcontab.o ntcontab.s ;\
rm -f /oracle/OraHome92/lib/ntcontab.o ;\
mv ntcontab.o /oracle/OraHome92/lib ;\
/usr/ccs/bin/ar rv /oracle/OraHome92/lib/libn9.a /oracle/OraHome92/lib
/ntcontab.o ; fi)
Error in finding run directory. Using default /opt/SUNWspro/binerror: Unable to
find current directory
*** Error code 1
make: Fatal error: Command failed for target `ntcontab.o'
Could anyone give me a suggestion how to fix the problem.
It's urgent
Many thanks,
KelvinIf someone having above problem....
umount partitions where installing oracle and then check perrmisions to mount point and mount back.
This work for me.
Thanks -
Error while installing database in oracle linux 4 via VMware Server Console
Hi to all
While Installing Oracle database in linux OS via Virtual machine, i got the below error :-
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-07-30_12-34-31PM. Please wait ...
[oracle@localhost database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.Internal Error: Can't
connect to X11window server using ':0.0' as the value of the
DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native
Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown
Source)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at
java.awt.GraphicsEnvironment.getLovalGraphicsEnvironment
(Unknown Source)
at java.awt.Window.init(Unknown Source)
at java.awt.Window.<init>(Unknown Source)
at java.awt.Frame.<init>(Unknown Sourece)
at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown
Source)
at oracle.sysman.oio.oioc.OicocOneClickInstaller.<init>
(OiocOneClickInstaller.java:378)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main
(OiocOneClickInstaller.java:2091)
Please make a clear message to how i need to rectify, as of am a new user for the VMware server console.
Let me know what are all the steps i need to follow for rectifying the above error.
your guidance will be much appreciated.
Regards
KhanHi Helious,
After this problem cleared i installed the oracle database; while installing i found another error
Output generated from configuration assistant "Oracle Net Configuration Assistant".
Command = /home/oracle/oracle/product/10.2.0/db_1/jdk/jre//bin/java -Duser/
dir=/home/oracle/oracle/product/10.2.0/db_1/network/jlib -classpath
/home/oracle/oracle/product/10.2.0/db_1/jdk/jre//lib/i18n.jar:
/home/oracle/oracle/product/10.2.0/db_1/jdk/jre//lib/rt.jar:/home/oracle/oracle/product.10.
2.0/db_1/jlib/ewt3.jar:/home/oracle/oracle/product/10.2.0/db_1/jlib/ewtcompat-3_3_15.jar:
/home/oracle/oracle/product/10.2.0/db_1/jlib/netcfg.jar:/home/oracle/oracle/product/10.2.0
and etc.
what i need to do for these errors, and i shutdown my system.
And how i need to continue after rectifying from that point.
Please let me know.. Your help will be highly appreciated
Regards
Khan
Maybe you are looking for
-
Can't install windows xp on macbook air
Hi, I have posted already on the forum about 1 month ago or more and no one answered me, so trying again. How can I install windows xp on my macbook air? I have an original xp sp2 disk and a generic external dvd burner with usb. I have tried many tim
-
Please Help [ reloated to G.8032 (ERPS)]
Dear All. There is curious thing related G.8032 (ERPS). We have a plan to configure erps for fastest redundancy structure in our infra structure. But i have C7606-S chassis in our infra , the supervisor engine of the chassis l is "Cisco 7606S Chassis
-
Issue with 3 attachments in an email
Hi All, Anybody can send me the program which generates 3 excel sheets as an attachment. i wrote one program which geberates .txt files as an atatchmetns. thanks, maheedhar
-
Question on PSI: Setting Constraint Type
In our current project, we are using the PSI to copy multiple tasks from one section of the project and paste at the end in order to create new set of tasks within the project. Below is the code snippet from our solution. We, first, create a new ta
-
Is Live Type Apples version of Adobe After Effects?
Hello i was curious to know if live type is apples version of adobe after effects? now i know they are not the same but i started learning adobe after effects and it seems very similar...I don't want to try and learn another program if i can do the s