Presenting characteristic only at one level

I have a query where the result set is presented as a hierarchy - at the state level, then district level and then at the office level. One of the characters displayed is the office manager. I have to show this value only at the office level and not at the region level.
How can I do this?

If office level is at leaf position, make display hierarchy deactivate from the characterstic properties.

Similar Messages

  • SAP APO DP CBF - Change data only at one level

    Hello Guys,
    I am getting error as "Change data only at one level".
    I am getting this error while loading data in the planning book at product level (Details All on products).
    I have a default macro in the data view. However, I am getting proper results when i do a details all on some other characteristic.
    Any clue about these error message ?
    Regards,
    Jacky Jain.

    Hello Guys,
    I am getting error as "Change data only at one level".
    I am getting this error while loading data in the planning book at product level (Details All on products).
    I have a default macro in the data view. However, I am getting proper results when i do a details all on some other characteristic.
    Any clue about these error message ?
    Regards,
    Jacky Jain.

  • RemovingContext only for One level(Message Mapping)

    Hi,
    Is it possible to remove context only for one level?
    For Eg:If I apply [RemoveContext] function to <Item>
    I will get {A1,A2,B1,B2,C1,C2,C3,C4}
    <SourceRoot>
    <A>
    <Item r="a">A1</Item>
    <Item r="b">A2</Item>
    </A>
    <A>
    <Item r="a">B1</Item>
    <Item r="b">B2</Item>
    </A>
    <A>
    <Item r="a">c1</Item>
    <Item r="b">c2</Item>
    <Item r="c">c3</Item>
    <Item r="d">c4</Item>
    </A>
    </SourceRoot>
    But I need only those coming under a particluar <A> .
    Like {B1,B2}.
    Any way to do this?
    Can anyone help.
    Thanks in Advance
    Message was edited by: Chemmanz

    Hi,
    I was just trying to give an example. In my real case
    SOURCE - INVOIC01 IDoc
    TARGET - cXML Structure for Invoice.
    When it goes to Line item level the complexity comes.
    A similar situation as i explained needs to be solved.
    [REMOVECONTEXT] helped me a lot.
    But I this situation I want to restrict it to a single level.
    For Ex:
    <INVOIC02>
    <IDOC>
    <EIEDP01>
    <EIEDP02 QUALF="001">.. </EIEDP02>
    <EIEDP02 QUALF="002">.. </EIEDP02>
    <EIEDP02 QUALF="0xx">.. </EIEDP02>
    </EIEDP01>
    <EIEDP01>
    <EIEDP02 QUALF="001">.. </EIEDP02>
    <EIEDP02 QUALF="002">.. </EIEDP02>
    <EIEDP02 QUALF="0xx">.. </EIEDP02>
    </EIEDP01>
    </IDOC>
    </INVOIC02>
    1.<EIEDP01>
    <=== mapped directly to ==> <InvoiceDetailOrder>
    Then internal things are organized differently in
    <InvoiceDetailOrder> compared to IDoc element<EIEDP01>
    Ex:
    I want to take all the <EIEDP02>s coming under one line Item <EIEDP01>
    <EIEDP02> cannot be mapped diectly to cXML element. It can be done only after checking it's own attribute QUALF.
    For this I applied [REMOVECONTEXT], but i am getting all the QALF values.
    I need to restrict it to <EIEDP01> level.
    Regards
    Chemmam

  • CS_WHERE_USED_MAT only returns one level

    Hi all,
    I need to get the results that CS15 (where-used) gives me when multi-level is checked.
    I need to write a program and was hoping to use FM CS_WHERE_USED_MAT.  However, this FM only returns the materials that are one level down.  I'm on 4.5b.
    Does anyone know what FM I can use that will give me the materials at all levels (like CS15 does).  I can use CS_WHERE_USED_MAT and feed back in each material until I reach the end of the levels.  But I was wondering if anyone has found a better way.
    Thanks,
    Mike

    you can refer link:[http://wiki.sdn.sap.com/wiki/display/Snippets/InverseBOMExplosion-ABAP]
    or use fm CS_BOM_EXPL_MAT_V2 pass X to field MEHRS

  • Database Object Dependencies - only goes one level deep

    I've run the Database Object Dependencies report and it appears that the report only shows the top level dependencies and not lower level ones. Am I running this report incorrectly or is there something I'm missing.
    For example, it displays the tables and views correctly but does not show any triggers that have been created for a specific table. Additionally, I didn't see any references to database links being used.
    version: 3.1.1.00.09
    thanks
    John
    Edited by: johurj on Dec 8, 2008 2:49 PM
    Edited by: johurj on Dec 8, 2008 2:53 PM
    Edited by: johurj on Dec 8, 2008 2:54 PM

    John,
    The report shows the immediate dependencies for the anonymous blocks and similar code snippets contained within the application components. It's just like if you did this:
    create table footab (n1 number)
    create trigger footrig before insert on footab for each row begin null; end;
    create or replace procedure fooproc
    as
    begin
    for c1 in (select n1 from footab) loop
    null;
    end loop;
    end;
    SQL> select referenced_name from all_dependencies where name='FOOPROC'
    2 /
    REFERENCED_NAME
    SYS_STUB_FOR_PURITY_ANALYSIS
    STANDARD
    FOOTAB
    SQL>
    The table FOOTAB is the only "real" object that the procedure FOOPROC has a dependency on. No mention of the trigger on the table.
    Additionally, I didn't see any references to database links being used.Yes, that would be a possible improvement to the report.
    Scott

  • Is there only the one level of undo in color?

    I really hope there are more levels. I like to adjust several things and undo them sequentially to see the look...

    Only one Undo. However, if you are doing a lot of your work in the Secondaries, you can disable each secondary, one at a time. Same with the ColorFX room, just select Bypass for the individual node.
    On top of that, you can have up to 4 grades and you can bounce between them by just selecting the grade on the timeline.

  • Missing Parts check one level....can you confirm

    Simple scenario.  I have a 3 level BOM.
    Top level Item Mat A (make to order 82) > Mat X (make to stock strategy 40) > Component 1 (purchased).
    Stock: There is only stock for the Component 1
    When I create an order for Mat A I get a missing part for Mat X.  However, the committed date is giving me the Total replenishment lead time of my Mat X and not considering just the lead time to make Mat X even though we have Component 1 in stock. So my problem is that the ATP check is not considering that we have Component 1 in stock and should just give me a committed date for the in production time of Mat X.
    Now I do understand that SAP PP may only look at the Zero stock for my Mat X when I create an Order for Mat A (Top level) - if this is why then fine but I wanted to check I am not missing something.
    Moreover, if you make Mat X a collective (52) then it will see the stock for the component and give a reduced commitment date but my client does not want a collective order as they want to group the Make to stock items.
    Yes if there was a planned order for Mat X then it would consider it.
    My point is that am I right that pure ATP missing part will only consider one level in my example ?
    any help buddies ?

    007,
    I don't know if I would call it a weakness.  It is what it is.  Its like spending the money for a Hyundai, and expecting the features of a Mercedes.  Not gonna happen.
    The client gets as much as he is willing to pay for.  If he wants a multilevel availability check, then he must pay for the additional software that will perform this task (APO or third party), or he should commission a consulting company to write a custom application that performs this task within ERP. 
    All such decisions boil down to the client's willingness to spend money and resources.  Its nothing to get frustrated about.  After all, he is the one that made the decision to buy SAP ERP, not you.  If he is unhappy, he can contact Walldorf.
    Best Regards,
    DB49

  • Navigation bar with one level

    Hi,
    how can I use a navigation bar only with one level?
    any ideas,
    thanks in advance,
    david

    hi,
    Check this document
    http://help.sap.com/saphelp_nw04/helpdata/en/5a/33befa45ca7f459b24d0c5d51d0749/frameset.htm
    Regards,
    Ganesh N
    Reward useful answers

  • Worksetmap: more then one level possible?

    Hi all,
    Does anyone know if there is a possibility to have multiple levels in a worksetmap iView? Or how we can achieve this?
    Default you can only go one level deep but this results in some clicks too much for the endusers.
    SAP states on help.sap.com: "...Workset Map is the equivalent of a site map...". However the lack of going deeper then one level makes it difficult to accept for endusers.
    Already in 2006 this was raised - I hope time brought raad:
    Purpose of workset map iView?
    Cheers,
    Geert

    Hi,
    unfortunately I don't think much has changed since then. The workset map iView will only display the current (or better one) level. However, you can put worksetmap iViews on every level to accomplish what you are looking for.
    I have done this at several customers. It is a lot of one time effort, but than it looks nice.
    Regards,
    Holger.

  • I can only see one parent tab from the 2 level Tabs

    Hello,
    I have some pages, lets say page A, B, C, D.
    Now I have a standard tab-set for the pages A and B, its named S1 (and has tabs for the page A and B).
    I have another tab-set for the pages C and D, this is named S2 (and has tabs for the page C and D).
    Now I have a parent tab to select the standard tab-set S1, this is named P1.
    And I have another parent tab to select tab-set S2, this is named P2.
    I can now only see one parent tab (P1 or P2), but I cant change from P1 to P2. The standard tabs are working good to select between A and B (or C and D).
    As a picture, I see my tabs like this:
    _____________P1
    A__B
    or
    _____________P2
    C__D
    but I want to have:
    ___________P2 P1
    A__B
    or
    ___________P2 P1
    C__D
    Can anyone help me?
    Regards,
    Mark

    Hm, interesting. I found out that the parent tabsets work both ways:
    1) You need to tell the parent tabset for which page it is current
    2) you need to tell the page which parent tabset to use

  • FCP only capturing one channel. what's up with that!?

    in FCP 7 while i am logging and capturing HDV footage off of my canon XLH1, only one channel of audio is captured. originally the audio was shot using 2 separate channels, in fact, i can hear both channels playing back (each on their own sound level/they are not mixed) while the capture is happening.. but when i'm done, FCP has only captured one of the channels.
    how can i resolve this problem?

    in my capture bin, after i've captured the clip, it shows that only one audio clip was captured. when i drag it into the timeline, only one audio channel is present.
    my lost channel was on a wireless mic, as was the saved channel.
    fcp is only capturing one channel even when i log other tapes that did not have separated audio channels.
    i'm guessing there is some setting that is now off while i capture, because it used to capture audio just fine last week.

  • Two separate calculated columns - results show up only in one of them

    Hey,
    I've recently run into some peculiar behaviour in OBIEE (Oracle Business Intelligence 11.1.1.7.0). I'm using three attribute colums (deliv. on time, ordered, backlog) to calculate a monthly service level. In addition I'm using a customer ID number to separate our customers into export and national customers. I've three calculated columns - Service Level Export, Service Level Total and Service Level National. I'm using a simple case-statement to distinguish between international and national customers (When custID between xxx and yyy then...). The total service level column doesn't have a case-if calculation, only a couple of simple mathematical operations and it works fine.
    Now the problem is that the results show up only in one of those calculated columns containing case-if calculations - not both at the same time. Using a prompt in a pivot table I can verify that both columns get proper values but when I remove the prompt half of the values randomly disappear from these columns so that only one of the columns has a value for a specific month. The calculations in all three columns are identical - the only difference is that Serv. L. Exp. exludes a spesific CustID whereas the Serv. L. Nat. only includes that one CustID.
    Example - both Serv. L. Exp and Serv. L. Nat should have values for every month, now only one of them gets values
    Month          Serv. L. Exp.               Serv. L. Nat.               Total Serv. L.
    01                         15 %                                                       15 %
    02                         17 %                                                       17 %
    03                         13 %                                                       13 %
    04                                                          20 %                      20 %
    05                                                          22 %                      22 %
    I've a few months of OBIEE experience under my belt so I'm not that experienced but usually I've been able to figure out what's wrong on my own. This time, however, this leaves me dumbfounded. Any help or advice would be much appreciated.
    Regards,
    Silver

    Hi,
    Serv.L.Nat is calculated 100 * INVOICED / (ORDERED + DELAYED). For National Service Level the case statement (including the calculations) is as follows (the inner CASE limits the Serv.L.Nat per cust to a range of 0 - 100 %):
    CASE WHEN "fact"."CustID" = 100001 THEN (
         CASE WHEN Serv.L.Nat > 100 THEN 100
         WHEN Serv.L.Nat < 0 THEN 0
         WHEN Serv.L.Nat IS NULL THEN 0
         ELSE Serv.L.Nat
         END)
    END
    For Export the sql is exactly like the one above, barring the reversed condition.
    Regards,
    Silver
    PS. The above is a burst of pseudoSQL so don't mind the typos, the actual code is tested to work as intended... barring the fact that something's wrong with getting the values to appear.

  • Is there a way to only show some music from itunes match?  my wife doesnt want to see every song we have, only the ones she likes

    Is there a way to hide songs/albumbs in itunes match only on certain devices?  
    for example, I have a huge collection of songs, and my wife only wants to see 'her stuff' on her iphone.
    or am i going to have to create another account just for her, and either rebuy or manualy store the songs on her phone?

    Hi
    You can only use one Apple id for your iTunes match.
    At present there is no way to hide selected songs.
    Whilst all the music will show on you wife's iphone, she could create playlist(s) on your computer to include only her songs.
    Jim

  • Database 'TEST' is already open and can only have one user at a time.

    Hi all,
    Could some help on this issue as per urgency!
    Database 'TEST' is already open and can only have one user at a time.
    I also tried this command but having the same error, please let me know how to troubleshoot this issue
    Use Master
    GO
    Select * from master.sys.sysprocesses
    Where spid > 50
                And dbid=DB_ID (‘StuckDB’))  -- replace with your database name
    Thanks

    Hi Tony,
    sorry got the same error again, it can't allow me sp_who2 as well
    I tried above command got the following error
    Changes
    to the state or options of database ‘TEST’ cannot be made at this time. The database is in single-user mode, and a user is currently connected to it.Msg 5069, Level 16, State 1, 

  • Designjet T520 will only print one page.

    Hi, Brand new Windows 8 HP PC printing to a Designjet T520, will only print one page.I have met this problem on laserjets in the past and resolved it by enabling/disabling mopier mode.However none of the drivers I have tried (many) for the Designjet T520 have the option to turn on or off Mopier Mode. After many hours spent troubleshooting, I formatted and installed the Windows 8 machine again from scratch.Even with this brand new install on a bran new PC, I still cannot print multiple copies to the designjet. In the same office, 3 other Windows 8 machines are printing fine to the same plotter and can print mutliple copies. The driver versions are the same on all machines. Hope someone can help.Thanks.

    This forum is focused on consumer level products.  For the Designjet you may have better results posting in the HP DesignJet forum here, that is where the DesignJet experts can be found.

Maybe you are looking for