Preserving an Object after it Bounces into Place

I'm creating a simple banner for my site and have run into problems with easing.
What I want to happen is for the title of my site to bounce into place from frames 1 to 60 and then for an adjacent tag line to transition from blurry to clear during frames 61 to 90.
This is what my timeline looks like:
What I can't figure out for the life of me is how to get the title to remain on the stage after it stops bouncing on frame 60.
I tried extending the bounce tween to frame 90 then using the motion editor to shrink it to frame 60, but, for some reason it becomes distorted and no longer looks like a bounce:
What's the trick to getting the title to stay in place?

Thanks, that did it (assuming you meant frame 60 and not 10).
So if I change the location of the title in frame 60, I also have to change it in frame 61 now, correct?
How come editing the bounce ease didn't work? Why when I compressed it did it lose its bouncy integrity?

Similar Messages

How to make a draggable object snap into place?

I'm new to Flash (sort of - I used it a bit back in 1999-2000, but it's changed a LOT since then). I'm making an educational game for my company that involves dragging labels from a word-bank to their correct position on a diagram. I want the kids to be able to drag any one of the five labels and move them to any one of five marked positions on the diagram. I'm using Flash CS5 with Actionscript 3. I used code snippets, so that each individual label has the following code associated with it:
movieClip_1.addEventListener(MouseEvent.MOUSE_DOWN, fl_ClickToDrag);
function fl_ClickToDrag(event:MouseEvent):void
movieClip_1.startDrag();
stage.addEventListener(MouseEvent.MOUSE_UP, fl_ReleaseToDrop);
function fl_ReleaseToDrop(event:MouseEvent):void
movieClip_1.stopDrag();
Is there any code that I could add in there to make the objects then snap into positions when dragged near them? Note that there are five possible positions for them to snap to. The coordinates for those are:
X
Y
299.75
235.90
775.40
244.65
421.15
447.45
804.15
484.85
437.15
599.60
Here is a screenshot of the area of the game that this is concerning to give you an idea of what I'm talking about:
Thanks for any help you can give me.

It might help if I give ALL of my code for this project. Here it is:
movieClip_1.addEventListener(MouseEvent.MOUSE_DOWN, fl_ClickToDrag);
function fl_ClickToDrag(event:MouseEvent):void
     movieClip_1.startDrag();
stage.addEventListener(MouseEvent.MOUSE_UP, fl_ReleaseToDrop);
function fl_ReleaseToDrop(event:MouseEvent):void
     movieClip_1.stopDrag();
movieClip_2.addEventListener(MouseEvent.MOUSE_DOWN, fl_ClickToDrag_2);
function fl_ClickToDrag_2(event:MouseEvent):void
     movieClip_2.startDrag();
stage.addEventListener(MouseEvent.MOUSE_UP, fl_ReleaseToDrop_2);
function fl_ReleaseToDrop_2(event:MouseEvent):void
     movieClip_2.stopDrag();
movieClip_3.addEventListener(MouseEvent.MOUSE_DOWN, fl_ClickToDrag_3);
function fl_ClickToDrag_3(event:MouseEvent):void
     movieClip_3.startDrag();
stage.addEventListener(MouseEvent.MOUSE_UP, fl_ReleaseToDrop_3);
function fl_ReleaseToDrop_3(event:MouseEvent):void
     movieClip_3.stopDrag();
movieClip_4.addEventListener(MouseEvent.MOUSE_DOWN, fl_ClickToDrag_4);
function fl_ClickToDrag_4(event:MouseEvent):void
     movieClip_4.startDrag();
stage.addEventListener(MouseEvent.MOUSE_UP, fl_ReleaseToDrop_4);
function fl_ReleaseToDrop_4(event:MouseEvent):void
     movieClip_4.stopDrag();
movieClip_5.addEventListener(MouseEvent.MOUSE_DOWN, fl_ClickToDrag_5);
function fl_ClickToDrag_5(event:MouseEvent):void
     movieClip_5.startDrag();
stage.addEventListener(MouseEvent.MOUSE_UP, fl_ReleaseToDrop_5);
function fl_ReleaseToDrop_5(event:MouseEvent):void
     movieClip_5.stopDrag();
answers_but.addEventListener(MouseEvent.CLICK, fl_ClickToPosition);
function fl_ClickToPosition(event:MouseEvent):void
     answersflyin.x = 230.00;
     answersflyin.y = 187.50;
hide_but.addEventListener(MouseEvent.CLICK, fl_ClickToPosition_2);
function fl_ClickToPosition_2(event:MouseEvent):void
     answersflyin.x = 693;
     answersflyin.y = 865.8;
clear_but.addEventListener(MouseEvent.CLICK, fl_ClickToPosition_3);
function fl_ClickToPosition_3(event:MouseEvent):void
     movieClip_1.x = 112;
     movieClip_1.y = 246.55;
     movieClip_2.x = 112;
     movieClip_2.y = 327.85;
     movieClip_3.x = 112;
     movieClip_3.y = 415.55;
     movieClip_4.x = 112;
     movieClip_4.y = 495.5;
     movieClip_5.x = 112;
     movieClip_5.y = 578.25;
     answersflyin.x = 693;
     answersflyin.y = 865.8;
stop();
That all works really well, too, except that the objects don't snap into place. Other than that, I'm able to drag each of the 5 movie-clips onto the board, arrange them as I like, click one button to show correct answers, another to hide answers, and another to sweep the board clean.

No track shows up after Bounce in Place

Using Logic Pro X 10.0.3
I am working with some simple backing tracks that I want to export over to Mainstage. Last night, for each track I did a Bounce in Place, then I exported the files and loaded them into Mainstage, no muss no fuss.
However, I needed to edit the tracks in Logic and re-export. So I (and maybe here is where I blew it) deleted the previously bounced audio tracks and tried to bounce them again after making my adjustments. The Bounce in Place function seems to run, but after it scans through the whole piece no new bounce track shows up.
Is Logic somehow confused by my deleting the previous versions of the bounced audio files? In any event, I can no longer get new bounced audio files. Help!

I have no clue why, but I came back to it later, added a couple of markers to the song, and now bounce in place works. It appears to be a bug, but I guess I am OK now.

My home button is not popping back into place after pressing it

My home button is not popping back into place after pressing it. Thus a double click is nearly impossible. It takes a while until it is back in place and i can press it again. Anything I can do? May that because of dirt in the ultrafine gap between glass and button?

bring your phone into Apple for evaluation

After trying to update itunes it now hangs moving items into place.

I get the error that this copy of itunes is corrupted or is not installed correctly. Please reinstall itunes (error -42037). I have attempted to reinstall but the install process hangs at moving items into place. I have left it over night, before manually shutting down and trying again, and then left it all day. Still hangs, whilst hanging the time remaining goes up from less than a minute, to 1 hour 6 minutes, to 2 hours 50 minutes etc. I need to fix quickly as I am setting up a new phone and was able to restore all but my music from icloud. I need my music and playlists set up before tomorrow. Thanks

Hi, reinstalling iTunes should not mess with your music et cetera (however some users have suggested on here that it did), but keeping a backup is always recommended anyway.
You can visit this link to install iTunes, the older seemingly corrupted version will be replaced...Troubleshooting iTunes installation on Mac OS X - Apple Support

How do I undo a bounce in place after I have saved a project?

I bounced my project in place on Logic Express 9 (9.1.8) thinking it was complete and saved it, but I now have some changes I'd like to make that I can't make now that my project is bounced in place. Any ideas at all would be helpful, and even more helpful is the real answer of how to un-bounce a project!

Hi!!!
Maybe you can try in your project folder. There is another folder called "Project File Backup".
Hope it helps!!!

I removed my battery in an attempt to insert a SIM card, obviously without knowing how to insert the SIM card. I put the battery back into place and it was already charged 100%, but it's stuck in recovery mode. I've already restored it, but it won't boot.

I was trying to insert a SIM card into my iPhone 4 without actually knowing how to do so. I assumed that I was to remove the back of the phone and find a slot for it near the battery. I removed the battery in an attempt to find a SIM slot, and was obviously unsuccessful. I put the battery back into place and screwed the phone back plate back on. Note: the battery was fully charged and the iPhone was working perfectly fine before. After screwing the iPhone back into place properly, I thought, I attempted to cut the phone on and it would not do so. I put it back on the charger, and the screen came up that says "Connect to iTunes". I obviously couldn't do so if its plugged into the wall. I plugged into the computer, connected it to iTunes, went through the Recovery mode process, and it still won't turn on. The computer says that the iPhone is in Recovery mode, but iTunes can't do anything because it has already been restored. When I disconnect it from the computer, I hold all buttons in all possible combinations, but it won't turn on at all. When I plug it into the wall, it again says to connect to iTunes. I don't know if I damaged the battery or any part within the iPhone, but I was sensitive in my approach to removing the battery and putting it back in, and there is no visible damage whatsoever. I am extremely frustrated and in desperate need of Apple-Pro help.

do you have a cdma iphone 4? becauase cdma iphones dont have a sim card slot... the providers that use cdma technology here in the us would be verizion, sprint, criket, ect... if you want to use your iphone 4 on att or tmobile (gsm carriers). then you would need a gsm iphone 4 (has sim card slot). a gsm iphone 4 is different than a cdma iphone 4 (they have different radio chips). maby you missed the sim card slot? sim card slot would be on the side of the phone.. never inside (unless it has a removable back cover like the galaxy s3 or s4), if you dont see a sim card slot on the side of the phone than you have a cmda iphone 4. can you tell me what carrier you are trying to use?

My MacBook pro is freezing at the "moving items into place" phase. I have to restore from time machine each time. I'm talking about the 10.7.4 update

I can't seem to get the 10.7.4 update to work. It constantly freezing at the "moving items into place" phase. I let it run overnight and it's still frozen. I have to restore from time machine backup each time. Any help appreciated.

this is somethinng like the third post i have read about that update causing troubles...
But if I read this right- it is still in the install? Had you restarted and repaired permissions BEFORE the download? As well as emptying cache in safari first?
The other troubles I read had to do with after install, and caused by...oh what was it...it was early morning...an article at CNET news had it...google 10.7.4 update trouble and read the cnet one.

Create Info objects after extracting ds from ecc

Hi All,
I have replicated ds from ecc to bi and executed the infopackage. Now the data is upto psa level. How to create info objects after loading data to psa level to load the info objects to data targets like infocubes and dso. I have done to sucessfully to a flat file.
Thank you.

Hi Sudhir,
You can go into 2 directions: use as much as possible Business Content InfoObjects or use custom InfoObjects. A combination is also possible.
Especially in conjunction with SAP ECC extractions the Business Content InfoObjects are a safe choice. However, please consider the advantages it can have to use custom InfoObjects.
If you would like to go into the direction of custom InfoObjects, then I suggest reading the following blogs:
Generating Data Warehouse InfoObjects - Part 1: Introduction;
Generating Reporting InfoObjects based on Business Content - Part 1: Introduction.
Best regards,
Sander

Note 1054131 - Invalid DB objects after upgrade

HI,
We performed a migration from SAP 4.6C/Oracle9i.solaris to SAP 4.6C/Oracle10g/HPUX.
Now we need to upgrade SAP4.6C/Oracle10g/HPUX to ECC6.0.
As a prerequisite, I have checked the note
Note 1054131 - Invalid DB objects after upgrade
And I ran the script
SQL> SELECT OWNER, OBJECT_NAME, OBJECT_TYPE FROM DBA_OBJECTS
2 WHERE STATUS='INVALID'
3 AND
4 OWNER='SYS';
OWNER
OBJECT_NAME
OBJECT_TYPE         STATUS
SYS
DBMS_REPCAT_FLA
PACKAGE BODY        INVALID
SYS
DBMS_REPCAT_MAS
PACKAGE BODY        INVALID
OWNER
OBJECT_NAME
OBJECT_TYPE         STATUS
SYS
DBMS_REPCAT_UTL2
PACKAGE BODY        INVALID
SYS
DBMS_REDEFINITION
OWNER
OBJECT_NAME
OBJECT_TYPE         STATUS
PACKAGE BODY        INVALID
All the invalid objects are package body, can anyone help me how to proceed with this, can I proceed my upgrade to ECC 6.0 or do I need to delete the package body.
If I want to delete the package body,can you pl give me the commands and also post which whether I need to execute any steps
Pl help
Thanks
Senthil

Hi,
I guess you are talking about the Oracle Upgrade and not ECC Upgrade, as following are the pre-requisites for an ECC upgrade.
Making Database-Specific Preparations for Oracle
1. Check the value of parameter shared_pool_size:
4 Preparation
Making Preparations at the Database Level
Oracle 9.2: Check the value in file $ORACLE_HOME/dbs/init<SID>.ora.
Oracle 10.1 and higher:
select NAME, VALUE from v$parameter where name=shared_pool_size;
select NAME, VALUE from v$parameter where name=shared_pool_reserved_size;
If the value is lower than 150 MB, increase it to at least 150 MB (400 MB is better), and restart the
database.
2. Log on as user <sapsid>adm at the operating system level.
3. Log on to the database as the Oracle user system with sqlplus
4. Check the resource quotas of the database user SAPR3 or SAP<SAPSID>:
Oracle error 1536 can occur during the upgrade if the resource quotas of database user SAPR3
orSAP<SAPSID> are limited. Make sure that these quotas are unlimited. Check whether the table
DBA_SYS_PRIVS contains one of the following entries:
grantee=SAPR3/SAP<SAPSID>,privilege=UNLIMITED TABLESPACE,adm=YES
grantee=SAPR3/SAP<SAPSID>,privilege=UNLIMITED TABLESPACE,adm=NO
To do this, enter the following SQLPLUS statement:
select * from dba_sys_privs where grantee = SAPR3/SAP<SAPSID>;
If this entry does not exist, enter the SQLPLUS statement:
grant unlimited tablespace to sapr3/SAP<SAPSID>;
5. Log off from the database with the command quit.
6. Only if using the dictionary managed tablespaces function:
Make sure that the storage parameters MAXEXTENTS and NEXT have the correct values for certain tables and indexes. Otherwise, they may overflow during the upgrade. The Oracle-specific upgrade SAP Note contains the tables and the required minimum values.You can display the current settings with BRSPACE. The index names are not constant. However, you can also determine these names with BRSPACE. SAP Note 11777 describes how to change the parameters NEXT and MAXEXTENTS.
7. Only valid for: SAP R/3 3.1I
Make sure that parameter OPTIMIZER_MODE is set to OPTIMIZER_MODE=RULE.
For Oracle 9.2, check and, if necessary, edit the following Oracle profile:
$ORACLE_HOME/dbs/init<SAPSID>.ora
For Oracle 10.1. and higher, use the following statements:
Sqlplus /nolog
Connect /as sysdba
Alter system set OPTIMIZER_MODE=RULE scope=spfile;
8. Only if you do not switch off archiving during the upgrade:
If you want to leave brarchive running during the upgrade to avoid archiver stuck situations (brarchive -f ...), proceed as follows:
a) Create a temporary copy of brarchive:
4 Preparation
4.23 Making Preparations at the SAP System Level
cp /usr/sap/<SAPSID>/SYS/exe/run/brarchive /tmp
b) Start brarchive as user ora<sapsid> from the temporary directory /tmp/brarchive -f ...
c) After the upgrade, delete the copy of brarchive.
This procedure avoids upgrade errors caused by the program files being overwritten during the upgrade.
9. If your database version is already higher than the minimum version for the new release, we recommend that you exchange the DBA tools (such as BRSPACE) for the upgrade. The Database Software Oracle DVD for the database contains the up-to-date tools that you unpacked on the current kernel when you migrated the database. After you execute PREPARE, unpack this archive again into the exe subdirectory of the upgrade directory. This overwrites the DBA tools optimized for the minimum required database version with the tools best suited to your database version.
And if you are talking about an Oracle Upgrade then you just need these to compare once you have upgraded to 10g.
3.9 Checking for Invalid Database Objects
This optional step lets you check if there are any invalid database objects before the database upgrade to Oracle database 10g starts. After the upgrade it helps you distinguish database objects that have become invalid due to the upgrade process from those that were already invalid to start with.
Procedure
1. Execute the following commands:
SQL> spool invalid_objects
SQL> select unique object_name, object_type, owner from dba_objects where status
= 'INVALID';
SQL> @?/rdbms/admin/utlrp.sql
SQL> select unique object_name, object_type, owner from dba_objects where status
= 'INVALID';
SQL> spool off
A list of invalid objects before the upgrade is now generated.
2. Check the list of invalid objects after the upgrade.
If any objects in the list from before the upgrade are also in the list of invalid objects after the upgrade, you can be sure that this is not due to the upgrade process.
Regards,
Suhas

OWB Issue|| ORA-12838: cannot read/modify an object after modifying it in

Hi
I am not able to enter the data into the staging table .
it is also not throwing any error ,only giving warnings.
so as a next step i just took the intermediate result generation and try to run it
but it is giving me an error in that
ORA-12838: cannot read/modify an object after modifying it in parallel
Can you please help me in tthis case.
Thanks

Hello,
The error ORA-12838 occurs if you try to issue SELECT/DML immediately after completing parallel DML, within one transaction - it's not permitted.
Start another transaction - issue Commit or Rollback first.

Mountain Lion downloaded from App store will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! My Machine MacBook Pro OS 10.6.8 Processor 2.66Ghz i

Mountain Lion downloaded from App store on 11th and 12th June will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! Going around in circles!!
My Machine MacBook Pro OS 10.6.8
Processor 2.66Ghz i7,
4GB memory
128GB solid state drive
Purchased 2010

Thanks very much for the advice. I trawled through the other answers on the site and it appears others had the same issue. I doubled the available space and the install went like clockwork... which is what one would norma;ly expect from Apple :-)
Maybe Apple should have a ' definitely read me first' notice before a download takes place with CLEAR instructions to have more than the 6GB they indicate ofr the Mountain Lion download

ORA-12838: cannot read/modify an object after modifying it in parallel

I am getting the above error when i hit this part in my load ....
can somebody suggest me why it could be in this case ?
MERGE INTO PART1 H
USING (SELECT PA1,                              PART1,                                   CON1,                                   GEO1,                                   COUN1,                                   KIT1                          FROM W1 ) WH ON
                                   (H.PART1=WH.PART1)                                   --on PK darshan 01-03-2006
     WHEN MATCHED THEN
UPDATE SET                                   H.CON1     =WH.CON1,                         H.GEO1     = FN_GETGEOCODE ( WH.GEO1 ),               H.COUN1     =WH.COUN1,                         H.KIT1     =WH.KIT1,                    H.DT1     =TO_NUMBER(TO_CHAR(FN_GETGMTDATE(SYSDATE),'YYYYMMDD')),                              H.DT_LAST1          = FN_GETGMTDATE(SYSDATE)
          WHEN NOT MATCHED THEN
     INSERT     (H.PART1,                                   H.PART2,                                   H.CON1,                                   H.GEO1,                                   H.COUN1,                                   H.KITD1,                                   H.DT1,                                   H.DT_1,                                   H.DT_LAST_1)
          VALUES(CASE FN_MERGE_COUNTER(gpi_inserting)
               WHEN 0 THEN     WH.PART1 END,                         WH.PARTN1,                              WH.CON1,                              FN_GETGEOCODE ( WH.GEO1),                    WH.COUNT1,                              WH.KIT1,
          TO_NUMBER(TO_CHAR(FN_GETGMTDATE(SYSDATE),'YYYYMMDD')),                                   PKG_COMMONACTIVITIES.FN_GETGMTDATE(SYSDATE),                                        PKG_COMMONACTIVITIES.FN_GETGMTDATE(SYSDATE)
                                        );

does this give you a clue?
SQL> CREATE TABLE t AS
2 SELECT owner, object_name FROM all_objects
3 WHERE 1=0;
Table created.
SQL> INSERT /*+ APPEND */ INTO t
2 SELECT owner, object_name
3 FROM all_objects;
8982 rows created.
SQL> SELECT * FROM t;
SELECT * FROM t
ERROR at line 1:
ORA-12838: cannot read/modify an object after modifying it in parallelI bet that you need a commit after loading w1.
John

ITunes Install stuck on "Moving Items Into Place" for 3 days

3 days ago, I was unable to open iTunes on my Mac OSX Version 10.9.3. The error message claimed that the file was corrupt and I needed to uninstall and redownload iTunes. I started the download on May 16th in the morning. It got stuck on "moving items into place." After a few hours, I finally managed to force quit and shut down my system. Then, I tried again. It has been stuck on this screen since May 16th. Any idea why I am unable to download iTunes? HELP!

Just found this and it fixed the issue for me, hope it works for you:
- Try booting into Safe Mode, hold down left side shift key when booting, hold untill you see the progress bar (note this will take longer than normal, so be patient)
- Log in and open disk utilities (Applications->Utilities->Disk Utility app) then select (highlight) your volume in the left side bar, click repair permissions.
- The run software update again and try the install while in safe mode, if sucessful log out (this will take a little longer as well) and log back normally.

My iPod touch is disabled and I cannot even get it to work even after I plugged into my computer

My iPod touch is disabled and I cannot even get it to work even after I plugged into my computer..please help!!!

Try recovery mode agian.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Preserving an Object after it Bounces into Place

Similar Messages

Maybe you are looking for