Prevent recording GL Account on wrong WBS

HI,
my client has the following requirement.....
"Prevent recording GL Account on wrong WBS element in goods issue to the project: check if the GL account belong to the WBS element and if it doesn't generate error message and prevent saving till user choose the correct GL account",
Where do we assign gl to the wbs element in the goods issue.... ?
How can we do this??
thanks and regards
msr

Hi,
Sorry for the delayed reply.
Create sets for WBS Element and GL Account - Permissible combinations.
Check in the validation whether if GL in GL Set - WBS Element in WBS Element Set.
Find out some other unique feature like movement type and include it in the check function so that the validation is carried out only for the correct cases and you are able to carry out other transaction like posting to GL with some other account assignemnt.
Hope this helps.
Thanks
Varadharajan

Similar Messages

  • Selecting wrong WBS element while preparing the Purchase Order

    Hi Gurus
    We want to check the data while end user input it in the system.
    While preparing the the PO in the sysetm we input the plant id,storage location and WBS element.
    End user may select wrong WBS element of project under with plant. I want to prevent it.
    How can I prevent end user for selecting wrong WBS element under plant and storage location.
    Atul Kulkarni

    HI,
    You need to some developement...create Z table and maintain  the entries with the cobinations in what way you want to restrict and call the same in the PO.
    Hope it will works.
    Kuber

  • Restrict the user to select wrong wbs

    Dear Experts,
    I am creating a purchase requisition for project material by selecting account assignment category as Q. In the line item I am selecting plant for which the material is being procured. But if I select wrong wbs element ( wbs of other plant) then also system allows the P.R. to save. The same case is for creating P.O.as well as doing goods receipt and goods issue also.
    Please guide how the system should restrict the user to select wrong wbs while creating P.R. P.O. Goods Receipt and Goods Issue.
    Thanks & Regards,
    Aaditya

    Hi,
    Not sure but try checking these exits,
    SAPL2012 - Customer Exit for Enjoy Purchase Orders via BAPIs          
    SAPLMEWP - |Customer exit for processing of purchase orders via BAPIs  
    Hope it helps.
    Regards,
    Gokul

  • Prevent record deletion

    Hello,
    Is it possible to create a mechanism preventing record deletion if certain criteria is met?
    For example, if particular Account has Status=Active user is prevented from deleting the record.
    Workflows do not look to be helpful here, what could be the other options?
    Thanks in advance,
    Alexei
    Edited by: Alex H. on Sep 14, 2011 6:41 AM

    See if Dynamic Page Layout can help.

  • Credit master records are showing the wrong credit exposure?

    Hi,
    Some credit master records are showing the wrong credit exposure and therefore orders are being credit blocked when they should have been approved.
    The problems occur after the credit limit has changed in the credit master record
    Please Help.
    Regards,
    Chamandeep

    Dear Chamandeep,
    Trust you have reviewed the open documents that would constitute to credit exposure, and have turned a blank.
    In such cases, it is possible to reorganise the credit master data of customers by using the programmes RVKRED77 and RVKRED07.
    Kindly prefer the latter as it permits greater flexibility especially in selection of dates of data reorganisation.
    In either case, the data  re-organisation is resource intensive and is best run when all other users are cleared from the system.
    Regards,
    K Gopidas

  • SC--- Dump when I use wrong WBS element

    Hi SRM gurus,
    Can You plase give is there any OSS note for the following dump or  solution if any.
    I have maintained by mistake wrong WBS element
    Example :  Correct WBS is E-PTHK.CK.01
                     Entered as        E-PTHKC.CK.01  in this case getting Dump.
                     Entered as        E-PTHK.CK.02     in this case getting std Error as " No WBS element Exist"
    Thanks in advance

    Thank you both,
    Actually User has be maintaing in the personal settings before creating the SC.
    By mistake he has typed wrong in settings so Dump occured
    To avoid this is there any solution.
    Thank you
    Edited by: CK on Apr 2, 2009 5:44 PM

  • Accounts Receivable by WBS

    We currently use SD to generate invoices for multiple WBS but after posting to Accounting, there is only one customer line item created which does not have a reference to the WBS.
    My company puts much emphasis on reporting at the WBS level for revenue but also for tracking invoices and their subsequent payment.  In some of our reports, we are prorating the revenue and the subsequent payment by WBS but it is a little tricky.
    The Project Manager assigned to the SD billing document line item is responsible for collecting the cash.
    We are struggling with how to report on this by WBS.
    If anyone has thoughts/experience on how to do this, it would be appreciated.  It may require us to change our business process which I think our management would be open to.
    Through my research, I've read about Project Cash Management and thought this may be a solution.  If anyone has experience with this functionality, please let me know.
    Thank you,
    bak

    One of the things I do for clients is write policy and procedures. Thinking through  contingencies and writing very good policies and procedures is difficult and takes a balanced brain. To wit, a good consultant must have both a vivid imagination to see all of what can go wrong and an equally strong ability to perform calculations and include all of the details. It is neither a job for pure u201Cthinkersu201D or pure u201Cfeelers.u201D Recently, details have emerged that poorly written safety policies and procedures caused considerable chaos in the minutes following the explosion on the  BP oil rig in the Gulf of Mexico:
    =================================
    <a href="http://www.key2seo.com">SEO services</a>  | <a href="http://www.convert2xhtml.com">PSD to HTML</a>

  • Recorded audio in the wrong folder

    I recorded my audio in the wrong folder (they are not in the project folder). I copied them over to my project folder but can't figure out how to link my song file/audio regions to the new location. I tried to set this in the Audio Window by resetting "Set Audio Record Path" but it wants me to give it a new file name (creating a whole new document?)
    Can someone help me work this out?

    Brian:
    Try putting the files back in their original folder location, open up the project, and then use the Project -> Consolidate menu option. If I recall correctly it will move everything into a new specified folder (or an existing folder) and re-reference the paths for you.

  • Incremental records for accounting document number

    I am facing a problem where I need to get incremental upload. I have to get the Accounting document number posted for an asset. I was thinking of using ANLP-BELNR, forming the AWKEY from it, and then getting the BKPF-BELNR. This way I thought I would get incremental records, as BKPF has CPUDT and CPUTM. But my confusion is:
    1) is that date and time the time when the document was posted?
    2) this date and time differs from the date(CPUDT) and time(CPUTM) in ANEK table? Does that make any difference?
    3) Also I checked CDPOS, and for OBJECTCLAS = BELEG, adn TABNAME = BKPF, there is no entry with Changeid = 'I'. That means the new documnets posted are not being captured in CDPOS?
    Please tell me a way how can I get the incremental data?
    Thanks a lot,
    Nalini

    Here you go....
    RF_BELEG
    Regards,

  • GR/IR Account with Wrong Commitment Item

    Dear Experts,
    When we doing GR(MIGO), system is not deriving the commitment item from FMDerive, istead taking the commitment item from offsetting GL entry. Is it common behavior? If not, how to force GR act derived into right commitment item which its category (40/3). Please kindly advise. Thank you.

    Hi kkbdsp,
    My issue is this GR account is never derived from FMDerive. And i searched in forum, this is common behavior in SAP like Ming Hong post below :
    " What you described is a SAP standard behavior. For GR/IR account, system ignores whatever settings you made in FMDERIVE.  FM account assignment is inherited from the PO. For example your consumption PO has expense account 456 with CI 456, Fund and FC; your GR/IR account is 123 with CI 123.
    GR posting:
    DR 456 with CI 456/Fund/FC
    CR 123 with CI 456/Fund/FC
    IR posting:
    DR 123 with CI 456/Fund/FC
    CR Vendor
    Regards,
    Ming
    And my concern are :
    - I am just wondering why do we need to make CI setting for GR/IR with category 40/30?
    - if GR act is always derived from its offseting acct (expense acct 30/3), why then SAP give error message "GR reduction impossible. Wrong CI with FT 30 instead of 40 in GR/IR acct"?
    Please kindly advise. Thanks.

  • GR/IR clearing account calculating wrong price

    HI
    I am facing the problem with GR/IR clearing a/c, when the user is creating MIGO transation with ref Scheduled agreement PO, its calculating wrong price.
    My scenario is :-
    Scheduled agreement PO has been created in USD currency (Qua 370*356.07)
    While I am doing the MIGO itu2019s not calculating correctly.
    I can give some more information below
    Company code currency is RUB but transaction currency is USD
    PO is creating in USD
    Material ledger is activated for this material
    Currency exchange rates are updated in daily basis
    When I am doing the MIGO the document was created like below
    1709250    Duties accrual                     603.152,52- RUB             19.761,89- USD
    1100100    Comm.Inv.fin.pr.                 4.624.163,80  RUB            151.507,60 USD
    1614000    Transit match.acc.                 422.859,09- RUB             13.870,37- USD
    7774100    Pr.diff.oth.goods.               3.598.152,19- RUB            117.875,34- USD
    Actually posting is (370356.07=131745.9)
    *But here it is showing 13.870.37
    I am very thanking full for your Inputs.
    Thanks
    Ramakrishna
    Edited by: DRS12345 on Oct 27, 2010 11:31 AM

    Hi,
    What has already been posted in SAP has been posted. One alternative in front of you is to create adjustment postings in PCA to post to the correct Profit Center. You can use transaction code 1KEL or 9KE0 for the same but it may not work as most probably you will the GR/IR clearing account set to "Post automatically" in the GL Master. In such a scenario the only option would be to have customized program to create IDOCs with Message Type "PRCMAS" to post the adjustment postings in your system.
    regards

  • Question on the retriving the records from Account

    Hi all,
    I am now trying to retrieve account records using ListOfAccount API in the web service. I would like to retrieve multiple account data using two different condition array but
    the execution result is not what I expected.
    Suppose, Now I would like to get two account names like "a*" and "b*" and the expected result is 5 records all told, ("a","aa","aaa","b""bb") but all I can retrieve is four records
    ("a","aa","aaa","b").
    The JAVA code I wrote is this,
    ListOfAccount conditions = new ListOfAccount();
    Account condition1 = new Account();
    Account condition2 = new Account();
    condition1.setAccountName("LIKE 'a*'");
    condition2.setAccountName("LIKE 'b*'");
    conditions.setAccount(new Account[]{condition1, condition2});
    executeQuery("queryPageTest1", conditions);
    Why can't I retrieve all five records? Is it impossible to do so? Setting multiple conditions are not supported in CRM on Demand service?
    Thanks and regards,

    Hi Kdinesh_CRMIT.
    Thank you very much for your response.
    I have modified my Java code then run it, it worked fine! Thank you.
    And, I am very holding back but dare to ask, how can I set more than two "OR" conditions?
    I have set up the following code then tested but Axis error was observed.
    condition1.setAccountName("(LIKE 'a*') OR (LIKE 'b*') OR (LIKE'c*')");
    Is it possible to set more than two (2) "OR" conditions in the query?
    Thanks and best wishes,

  • GL Account taking wrong Functional Area while posting

    Hello All,
    IN GL account master records for one GL account there is functional area assigned D110 but While posting made to this accounts its taking Another Functional area D220
    Please let me know whether any one has faced same issue
    Regards,
    Prashant

    Hi Prashanth,
    I have the same issue with ECC 6.0 & New Gl Active and could you please share how you have resolved this issue?
    Regards
    Aashish Kedia

  • EAP MD5 with ISE 1.2 - How to Prevent Active Directory Account locks?

    Hi,
    Is there any how to prevent accounts to be locked in AD if someone do a password brute force attack in a account? ISE has some feature/Configuration to prevent this type of attack ?
    Thanks.

    So what you're saying is the retry values only come in to play if the RADIUS server is inaccessible, right?
    Windows laptops actually work just fine, because many of them are using machine authentication.  The main issue seems to be from iPhones, which are saving the username/password and then re-attempting too many times when the user changes password.
    One solution is to use LDAP instead of AD within ACS, but the downside is the password can be guessed thousands of time in a row and open to dictionary attacks.  We do enforce complex password policies so the liklihood of an account being compromised is slim, but, I'd rather eliminate the chance entirely.

  • GL account link with WBS element

    dear
    Memebers
    can any body tell me how to see the link with WBS and GL Account
    its vv urgent
    thanks na dregards
    madhu

    Hi,
    G/L acount will post cost to the WBSE say material cost etc through cost elements. You can check various reports for getting G/L account with WBSE such as CJI3 / s_alr_87013542
    Hope this will help you.
    Regards,
    Rakesh Pradhan

Maybe you are looking for