Preventing Netbean's UML code generation problem
When I generate code from my UML diagram in netbeans, how do I prevent it from making a local version of java api classes and interfaces?
Example: I have classes that extend JFrame. When I generate the code, it puts and an empty JFrame class in my source package.
This is a Java forum and not a Netbeans one.
Similar Messages
-
Hi,
I'm developing an application of ~50+ classes in UML on JSE8 and use java code generation.
The question is about aggregations.
Navigable aggregations translate in java code to a class attribute, and to the corresponding getter/setters-methods.
A non-navigable aggregation is not translated to java code at all.
( I would expect it should translate to an attribute, but without getter/setters.
My understanding is, "navigable" means "navigable from outside the class". Correct?)
So how can I model an aggregation, which translates to an attribute in java, without generating the getters/setters?
And where can I find a comprehensive list of how elements in class diagrams are translated to java code?
Where is the JSE8-UML-manual, which includes all these details about UML code generation?
Thanks a lot for any useful hint!Hi,
actually, the code generator is correct.
A non-navigable association should not generate an attribute.
Consider the example:
class Order -> class Date
You have navigation from class order to class date, but not otherwise.
This means that, given a Order object, you can find it's associated Date.
However, the inverse is not true: given a Date object you have no means of "navigating" or finding out which Order objects would have that date. This is what navigation means.
This should be translated into something like this
class Order{
Date theDate;
class Date{
int day, whatever;
//no ref to order-non navigable
If navigation from both classes were possible, a much more complicated code would be needed. It would be something along these lines, considering a 1-1 association (a *-1 association would require multiple order references to be stored at Date, with yet more complications):
class Order{
Date theDate;
void setDate(Date d)
theDate=d;
d.setOrder(this);
class Date{
int day,whatever;
Order theOrder; //navigation to order
void setOrder(Order o)
theOrder=o;
Care should be taken to ensure proper consistency between references (ie: the order in date should never be changed without making a corresponding change to the new order object).
All this serves to show, you should use navigation sparringly (as needed) , otherwise you're just complicating your code more than you should.
Greets
Jorge -
Hey everyone,
I'm evaluating Java IDE's right now and I'm working with a group that uses a tool called Popkin to do their design in UML. I'm trying to find a Java IDE that can import (via XMI) those diagrams to do the code generation.
Rational and TogetherSoft have integrated environments that couple the code and design (As you code, the UML is updated and as you create UML, the code is updated, etc.)
I'm wondering though, if you use something like JBuilder, how can you import the UML from another tool? Has anyone messed with Popkin before or tried to integrate something like this?
Thanks,
Willbump
i don't care about this topic any longer, but need to give out a duke dollar, first one to respond wins! -
Code generation problem with deployejb !
I am working with Oracle 8.1.5 and jdk 1.1.6,
when I am running the deployejb tool with the HelloWorld example of the demo directory, I have a problem with the code generation of the EJBHome and EJBObject:
deployejb -u ...
... [deployejb found HelloHome.class]
done
Generating EJBHome and EJBObject on the server...
An exception occured during code generation: Class not found : hello.HelloHome.class
Note my CLASSPATH variable is correctly set.
Can you HELP me ?
nullAdding -W2,-Rcond_elim to the existing flags does make both the small example and the original code compile correctly.
--David -
Hi I am trying to generate code from some UML diagrams in Netbeans 6. I selected the objects I want to generate code from, then right-clicked on the objects selected, from the menu I need to choose generate code option. But there is no generate code option available.
Can anyone help me with this.
thanks.
Richard.Please post NetBeans questions and requests at the NetBeans website mailing list.
These forums support the Java language, not NetBeans and other IDEs. -
Code generation problem when inlining
I've run into an instance of incorrectly generated code. The problem appears to occur when a function is marked in the source with the "inline" or "__inline__" qualifiers but the compiler decides not to inline it. The problem only appears when there is very specific control flow. A reduced program exhibiting this behavior is given below:
int actual_intr, format, cpl;
static __inline__ void report(int fno) {
if (actual_intr) actual_intr = fno;
void evaluate_M_int_ld(void) {
int spec = cpl==1 || cpl==3;
int adv = cpl==2 || cpl == 4;
int cclear = cpl==8 || cpl==10;
if (format != 101 && format!=202) report(0);
if (!spec) actual_intr = 2;
if (cclear) actual_intr = 3;
}I compile this program with gcc -O2 -fno-inline -S. Note that the -fno-inline flag is there to prevent inlining from occurring; I can reproduce the behavior without the flag on code examples large enough that the internal compiler rules limit inlining. (But they're way too large to post here.)
The generated assembly is:
.global evaluate_M_int_ld
evaluate_M_int_ld:
sethi %hi(format),%o5
sethi %hi(cpl),%o4
ld [%o5+%lo(format)],%g4
ld [%o4+%lo(cpl)],%o5
cmp %o5,1
be,pn %icc,.L77000052
cmp %o5,3
.L77000051:
be,pn %icc,.L77000052
or %g0,0,%g3
.L77000053:
xor %o5,8,%o0
<snipped a bunch of irrelevant stuff here>
.L77000052:
retl ! Result =
nopSomehow the "spec" calculation is branching to the end of the function. To make the problem even weirder, removing the unused adv variable results in correct compilation. If the __inline__ keyword is left out, the generated code is fine.
The obvious workaround for now is to use -D__inline__= -Dinline= on all of my compiles.
The compiler version and tool information is:
telyn-haul1% gcc -v
Using built-in specs.
Target: sparc-sun-solaris2.10
Configured with: /net/clpt-v490-1/export/data/bldmstr/20070711_mars_gcc/src/configure prefix=/usr/sfw enable-shared with-system-zlib enable-checking=release disable-libmudflap enable-languages=c,c++ enable-version-specific-runtime-libs with-cpu=v9 with-ld=/usr/ccs/bin/ld without-gnu-ld
Thread model: posix
gcc version 4.0.4 (gccfss)
--DavidAdding -W2,-Rcond_elim to the existing flags does make both the small example and the original code compile correctly.
--David -
Has anyone else noticed that Forte (at least 3.0.e) seems to "skip"
lines of code in some circumstances? Here is the most recent one that
I'm working with. Try the code below and notice that line 4 in
EXAMPLE1does not compile, yet it compiles fine in EXAMPLE2. According
to the Forte documentation for BEGIN, the syntax of EXAMPLE1 is
acceptable. Am I missing something?
EXAMPLE1:
1 str : TextData = new;
2
3 begin
4 str = '1234';
5 end;
EXAMPLE2:
1 str : TextData = new;
2
3 begin transaction
4 str = '1234';
5 end;
Thanks,
David Viggiano
SemaGroup Telecoms
[email protected]Has anyone else noticed that Forte (at least 3.0.e) seems to "skip"
lines of code in some circumstances? Here is the most recent one that
I'm working with. Try the code below and notice that line 4 in
EXAMPLE1does not compile, yet it compiles fine in EXAMPLE2. According
to the Forte documentation for BEGIN, the syntax of EXAMPLE1 is
acceptable. Am I missing something?
EXAMPLE1:
1 str : TextData = new;
2
3 begin
4 str = '1234';
5 end;
EXAMPLE2:
1 str : TextData = new;
2
3 begin transaction
4 str = '1234';
5 end;
Thanks,
David Viggiano
SemaGroup Telecoms
[email protected] -
Model interface toolkit (MIT) code generation failes in simulink
Hello,
I'm running into an odd Simulink Coder failure and I can't tell if this is due to an NI/MIT but or a general Simulink Coder issue.
System:
Windows 7
Matlab/Simulink R2013b w/ Simulink Coder
MIT 2013 SP1
System target file = "NIVeriStand_VxWorks.tlc"
Not that we even get to this point but... my "WindRiver GNU Toolchain Setup Path" is properly configured to: c:\gccdist\supplemental\setup-gcc.bat
The attached image shows the error I'm getting:
"Error: Invalid character in: 'SMA_model/SMA Driven Arm/wire/Heat Transfer Model/ ', exiting code generation. The name cannot end with / character".
In the image you can see that the "Heat Transfer Model" subsystem in fact does not have a "/" in the name.
Has anyone else ever run into this code generation problem before? If so, any suggestions on how to get around it?
Thanks.
Solved!
Go to Solution.
Attachments:
SimulinkCoderError.png 92 KBThat error is actually being reported by Simulink® before the build process begins. I'm guessing you would see it regardless of the TLC file you choose. Interestingly, in my tests here Simulink® doesn't allow me to leave a subsystem with a "/" at the end of the name. It automatically changes the name back to what it was before I tried to add the "/." That same error you see in the compilation window is displayed in the command line output when I attempt it. It looks like I'm running a different version than you though.
The screen shot doesn't really confirm the subsystem block name itself, at least the hierarchy at the top of the window appears to have parsed out all backlashes. Could you provide a screenshot of the heat transfer model subsystem block?
MATLAB®, Simulink®, and Real-Time Workshop® are registered trademarks of The MathWorks, Inc. All other trademarks are the property of their respective owners.
Applications Engineer
National Instruments
CLD Certified -
Automatic Code generation from UML for C++ in Visual Studio 2013 Ultimate
Hi all,
I am using Visual Studio 2013 Ultimate to design UML diagrams and want to use the class diagram to generate C++ code,
however I found that there seems only support C# generation.
Is there any way to do the code generation (even round-trip engineering with C++/UML model) from Visual Studio 2013 Ultimate?
There is a way to do C++ code generation by customize the text template file right? but it is time consuming and we don't have much time to do it.:(
Thanks a lot!Hello Grib,
>>is there anyway to integrate an STE code generator to Visual Studio 2013. I know there is EF5.x STE Generator but only for VS 2012.
Yes, you can.
Since the STEs are T4 template and you can just take template and code any changes or improvements you require yourselves! As you mentions, there is a EF5.x STE generator, you could download it and edit it. You could check this article:
Upgrading to EF6, we could see that from EF5 to EF6, the team moves classes to a new namespace, so we need to modify the T4 template to generate the new namespace.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
UML associations and code generation don't work
Hello,
I've maid a Class Diagramm in JSE 8, class generation works great, but I have a problem with associations : they are not generated (ie no attributes in class files). I've tried to give association name and also named both ends, but nothing better.
Thanks for your help.
PS : navigable association seems to work great.Thanks for your valuable feedback and sorry for the inconvenience.
I already submitted a request for enhancement (RFE) for automatic code generation for Association links. As for the documentation issue, I'm not able to replicate your problem. I'm seeing all comments in the source that I entered in the documentation panel. Could you please kindly provide me detail steps to reproduce the case that you don't see documentation generated in the code and I'll try to help you. Thanks!
--Peter -
Problem with Web Service Model code generation
Hello,
I'm importing two different web services into the same web dynpro component, which both contains properties "allGroup2" of type "All2".
This causes some problems with the code generation, first of all the Model-classes can't be generated because they don't know which of the two All2-classes to use. If I fix that problem (which can be easily done by adding the correct import statement) I still can't use the models in my web dynpro component, since it too doesn't know which of the All2-classes to use.
Even though I can fix this by adding imports and fixing the code, it of course gets regenerated next time I rebuild the project, and my changes are lost.
Does anyone know how to solve this?Apparently this is a known bug which is fixed in SP15.
Regards mattias -
Refactor - Renaming Problem Auto Code Generation
After renaming the java source files (backing beans) to upper case letters (ex. from console.java to Console.java),
JSC is not able to instantiate this class anymore, because the managed-bean.xml is altered automatically.
The next problem is the jsp-file. JSC produces some useless code which points to the new (by JSC) created managed beans (old ones still exist)
example (jsp):
</ui:body>
</ui:html>
</ui:page>
</f:view>
<ui:body binding="#{request$console.body1}" id="body1"/>
(managed-beans.xml)
<managed-bean>
<managed-bean-name>request$console</managed-bean-name>
I�m not able to delete this generated code, because after saving and reloading the jsp-file the inserted code is still there.
In the projects view my java source files are shown in small letters, even if the files are in upper case on the file system (explorer).
I�m using Studio Creator 2 Update 1 (Build 060915)
The project can only be deployed (exporting *.war in JSC) and executed when i change the file attributes to read-only after editing them with a standard text editor.
Any suggestions?Hi Naveen,
I found these two fms's which would enable automatic item code generation. See if it helps you.
declare @temp as char(20)
IF $[OITM.ItmsGrpCod] = 101
BEGIN
set @temp=(select isnull(max(right(ItemCode,4)),0) + 1 from OITM where (ItmsGrpCod= 101) and (len(ItemCode)=7))
set @temp='DRM'+isnull(replicate(0,4-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
ELSE IF $[OITM.ItmsGrpCod] = 102
BEGIN
set @temp=(select isnull(max(right(ItemCode,4)),0) + 1 from OITM where (ItmsGrpCod= 102) and (len(ItemCode)=7))
set @temp='PKG'+isnull(replicate(0,4-len(@temp)),'')+@temp
select cast(@temp as char(20))
END
And:
DECLARE
@NUM AS CHAR(7)
SET @NUM =
(SELECT RIGHT(MAX(CardCode), 7) FROM OITM)
SET @NUM = @NUM + 1
BEGIN
IF @NUM IS NULL OR @NUM = 0
BEGIN
SELECT 'I0000001'
END
IF @NUM < 10
BEGIN
SELECT 'I000000' + @NUM
END
IF @NUM > 9 AND @NUM < 100
BEGIN
SELECT 'I00000' + @NUM
END
----COMPLETE THE CODE
END
Thanks,
Joseph -
Error during distribution for compiled code generation-Reply
Hi,
Looking at your error messages, it looks as though your build is failing during the code generation phase of an autocompilation. To determine why the code generator crashed, either look in the $FORTE_ROOT/log/forte_ex*.log files or don't use autocompilation and use fcompile.
There are many reasons why the code generator could crash. Some of the things I've come across are running out of memory and trying to find invalid classes.
If its the invalid class problem you'll find a message like:
Generating code for partition BLTCustomWindow_cl0_Part1.
ERROR: Exiting due to following exception:
SYSTEM ERROR: Client partition FTCompile_cl0_Client was terminated by escaped
exception. See the remainder of the error stack for more information.
Class: qqsp_ResourceException
Error #: [1001, 3]
Detected at: qqrt_ForteExecAgent::LoadPartition at 1
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor", (partitionId =
9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
FATAL ERROR: Invalid class ProductBMServices.ProductSecurityMgrProxy
(0x4ecd,0x19a)
Class: qqsp_ImplementationException
Detected at: qqcg_TRclass::SetClass at 2
Last TOOL statement: method ForteCompiler.ProcessPGF
Error Time: Tue Aug 18 17:52:44
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = 9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
[9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
"FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
The solution for this instance is to clean up the invalid classes using the c4tstdrv utility.
c4tstdrv > setrepos star8
c4tstdrv > setwork dmcompiledbuild
c4tstdrv > open
Type Service Flags Level
err sh * 255
trc rp 1 4
c4tstdrv > findproj productbmservices
c4tstdrv > cleanuprtclasses
Removing extraneous RTclass ProductShootingLocationMgrProxy
Removing extraneous RTclass PRTerritoryBaseMgrProxy
Removing extraneous RTclass PRTerritoryMgrProxy
Removing extraneous RTclass TalentBaseMgrProxy
Removing extraneous RTclass TalentTypeMgrProxy
Removing extraneous RTclass TitleTypeBaseMgrProxy
Removing extraneous RTclass TitleTypeMgrProxy
Removing extraneous RTclass ProductSecurityBaseClass
Removing extraneous RTclass ProductSecurityBaseQuery
Removing extraneous RTclass ProductSecurityQuery
Removing extraneous RTclass ProductSecurityMgrProxy
c4tstdrv > commit
c4tstdrv > exit
Integrate the changes to the workspace, start the build again and this should have cured the problem.
However, its hard to know what the cause of your problem is without seeing the output in the log files.
Good luck.
Mark Carruthers
20th Century Fox
"Forte Consultants" <[email protected]> 01/22/99 08:35am >>>
Hi,
I'm doing application distribution for my application using a fscript
script and am forcing compilation on 2 of my partitions.
This I have been doing from quite sometime successfully. Recently I
developed a new service and plugged it into my application for
deployment.
I'm successfully able to distribute & deploy the interpreted code. But
I'm getting a long list of system errors when I try doing distribution
for compiled code. And I see only one of the .exe generated instead of
two because of which I'm unable to go ahead with installaion. I would
appreciate if anybody let me know why this's happening ?. The following
is the main chunk of this error list.
Thanks in advance.
--Anand Ramaswamy
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Can not initially communicate with the object named
(Unnamed),
which is supposed to be in partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 140]
Detected at: qqdo_ProxyMgr::CheckAccess at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Attempt to send to unknown destination partition
(32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
Class: qqsp_DistAccessException
Error #: [601, 102]
Detected at: qqdo_PartitionMgr::SendMsg at 1
Error Time: Fri Jan 22 10:44:22
Distributed method called: qqdo_InternalMessage.<Message> (object
name
Unnamed) from partition "CodeGenerationSvc_cl0_Part1-router",
(partitionId
= 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.2]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Partition (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1)
no
longer exists. The process associated with the partition probably
terminated.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::CheckStarted at 1
Error Time: Fri Jan 22 10:44:22
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #2.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:19
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: The load balanced router is disabled or has no members.
This
can happen if all of the members terminated or failed.
Class: qqsp_DistAccessException
Error #: [601, 161]
Detected at: qqdo_LbRouter::Route at 1
Error Time: Fri Jan 22 10:44:19
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.2]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (locally) on partition "Fscript_cl9_Client",
(partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
"fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
SYSTEM ERROR: Access to a load balanced router member (which is a
service
object) failed for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 162]
Detected at: qqdo_LbRouter::Route at 2
Error Time: Fri Jan 22 10:44:15
Distributed method called: GenerationMgrProxy.GeneratePartitionCode
(object name
site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
from partition "Fscript_cl9_Client", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.3]) in application
"fscript",
pid 4b81 on node MOOSUP in environment IGTSDENV
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: Cannot resolve the distributed reference for an object of
class
(qqlo_Object) named (<Unknown>) for the reasons below.
Class: qqsp_DistAccessException
Error #: [601, 144]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This distributed reference was previously invalidated due
to the
reasons below.
Class: qqsp_DistAccessException
Error #: [601, 132]
Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 3
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
SYSTEM ERROR: This method invocation is being retried because the
failures
shown below and the fact that the dialog duration is MESSAGE. This is
try #1.
Class: qqsp_DistAccessException
Error #: [601, 54]
Detected at: qqdo_Message::Failed at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Fri Jan 22 10:44:15
Distributed method called: qqlo_Object.<Message> (object name
Unnamed)
from partition "Forte_Executor", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
INFORMATION: Asynchronous Failure: Recieved a close from the network
partner:
Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
193.1.11.26 %LINKDISCON, network partner disconnected logical link
Event 4
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Fri Jan 22 10:44:15
Exception occurred (remotely) on partition
"CodeGenerationSvc_cl0_Part1-router", (partitionId =
32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
[32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
application
"CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
IGTSDENV.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi,
If this INCLUDE is in a function group go the MAIN program and activate from there.
Can you list out the include name?
a® -
Generic oracle eway code generation error in Java caps 5.1.3
Hi,
I'm using an oracle eway for adding records to a table. I have a prepared statement in the otd. When I try to build the project I'm getting the following error. Could any one let me know how this problem can be fixed?
com.stc.codegen.framework.model.CodeGenException: Generic Oracle eway code generation error(ERROR_CODEGEN_GENERIC_CODELET_GENERAL)
at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1860)
at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.processCodelets(CodeGenFrameworkImpl.java:640)
at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1544)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
at org.openide.util.Task.run(Task.java:136)
at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
Caused by: com.stc.codegen.framework.model.CodeGenException: Exception when generating OTD code ...Exception: javaClass: Oracle_std_otdOTD: Exception when invoke DB Codegen Task...Exception: Invalid parameter type: Class : [Std_insert_PreapredStat] Object: [Param1] Param Type : [DECIMAL].(ERROR_CODEGEN_DB)(ERROR_CREATE_OTD)
at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateOtdJarFile(OracleEWayCodeletFactory.java:2045)
at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1756)
... 10 more
Regards,
Abdulhi...
i too getting same problem..how did u reslove this...
please help me out...
thanks in advance
KK -
NI Motion Assistant LabVIEW Code Generation Error
Hello, the following is my current setup:
NI PCI-7334 motion control board
NI UMI 7774 splitter board
3 x NI P70530 Drives
3 x NI CTP12ELF10MAA00 Stepper Motors
3 x Power supply units for drives
LabVIEW 2010
NI Motion Assistant 2.6
Motion and Automation Explorer 4.7
I have built a three axis motion system that I am trying to configure with labview. After verifying that everything was set up correctly, I opened MAX, updated the firmware to my motion control board, and intitialized the controller. Since then, I have created many basic programs using the Motion Assistant Software to test the movement of my device. Everything works fine while using the Motion Assistant software (I have three axis movement, multidirectional control, and can perform various straight line and arc moves). My problems begin when I try to use the code generation feature.
When trying to use the code generation feature to output a labview diagram, I run into a problem where a dialog box pops up and says "Find the vi named ...."
Some examples of the names that come up are: Configure Vector Space.flx, Vector Space To Control.flx, Motion Error Handler.flx.
To be clear the program in Motion Assistant that I am trying to export to LabVIEW code is composed of two individual steps. One that tells X,Y, and Z motors to move forward 25 revolutions, and one step that tells them to move backwards 25 revolutions.
I have made many other programs in Motion Assistant that run fine, but I always receive similar errors when trying to use the code generation feature to export to LabVIEW. Is there something that I can do to solve my problem?
Thank you for your help.Hi Joe,
I am using Ni-Motion Assistant 2.6, Ni-Motion 8.1, and Motion and Automated Explorer version 4.7.
The code I posted is supposed to tell Axis 1 to move 40 revolutions at 400 rpm. It works fine in Ni-Motion Assistant but when I try to generate a LabVIEW diagram I receive the following error, "Find the VI named 'Motion Error Handler.flx'". I have had it search my directory, as well as the disk that I installed both LabVIEW and Ni-Motion but no luck. Thanks for your help.
Attachments:
1111.vi 9 KB
1 axis movement.zip 8 KB
Maybe you are looking for
-
Ways to make competitive with Dropbox
There's a few questions here but mostly comments. First of all, thanks for the iCloud Drive update. I'd like to make iCloud Drive my main cloud storage solution. However, before I can do that there are three things that need to be changed to make it
-
Stock Update after Sales Return
Hi, My stock in store A is 100. I issued 20 qty to customer through sales. Now stock came down to 80. Now customer returned me 5 qty back. I created return order in sales and I returned the 5 qty back. But it is not updating stocku2026stock is still
-
I use Oracle Forms 6 and DDE package. My dde peace of code work normal and fine, but problem is: How I can work with DDE without show word document on the screen or close that document which is show on screen? and later unlock that file so I can cut
-
HT204081 I purchased a book that was delivered in Italian not English, can I change it
Is it possible to change a book as it arrived in Itallian not English
-
APD vs Read from a cube using Function module
Hi, Please could someone tell me which is the best practice for the below case: I want to sent information for one cube to another and in the transformation read from a third cube. I think I have this two options: - Option1: In the transformatio