Code generation problems

Has anyone else noticed that Forte (at least 3.0.e) seems to "skip"
lines of code in some circumstances? Here is the most recent one that
I'm working with. Try the code below and notice that line 4 in
EXAMPLE1does not compile, yet it compiles fine in EXAMPLE2. According
to the Forte documentation for BEGIN, the syntax of EXAMPLE1 is
acceptable. Am I missing something?
EXAMPLE1:
1 str : TextData = new;
2
3 begin
4 str = '1234';
5 end;
EXAMPLE2:
1 str : TextData = new;
2
3 begin transaction
4 str = '1234';
5 end;
Thanks,
David Viggiano
SemaGroup Telecoms
[email protected]

Has anyone else noticed that Forte (at least 3.0.e) seems to "skip"
lines of code in some circumstances? Here is the most recent one that
I'm working with. Try the code below and notice that line 4 in
EXAMPLE1does not compile, yet it compiles fine in EXAMPLE2. According
to the Forte documentation for BEGIN, the syntax of EXAMPLE1 is
acceptable. Am I missing something?
EXAMPLE1:
1 str : TextData = new;
2
3 begin
4 str = '1234';
5 end;
EXAMPLE2:
1 str : TextData = new;
2
3 begin transaction
4 str = '1234';
5 end;
Thanks,
David Viggiano
SemaGroup Telecoms
[email protected]

Similar Messages

  • Code generation problem with deployejb !

    I am working with Oracle 8.1.5 and jdk 1.1.6,
    when I am running the deployejb tool with the HelloWorld example of the demo directory, I have a problem with the code generation of the EJBHome and EJBObject:
    deployejb -u ...
    ... [deployejb found HelloHome.class]
    done
    Generating EJBHome and EJBObject on the server...
    An exception occured during code generation: Class not found : hello.HelloHome.class
    Note my CLASSPATH variable is correctly set.
    Can you HELP me ?
    null

    Adding -W2,-Rcond_elim to the existing flags does make both the small example and the original code compile correctly.
    --David                                                                                                                                                                                                                                                               

  • Code generation problem when inlining

    I've run into an instance of incorrectly generated code. The problem appears to occur when a function is marked in the source with the "inline" or "__inline__" qualifiers but the compiler decides not to inline it. The problem only appears when there is very specific control flow. A reduced program exhibiting this behavior is given below:
    int actual_intr, format, cpl;
    static __inline__ void report(int fno) {
      if (actual_intr) actual_intr = fno;
    void evaluate_M_int_ld(void) {
      int spec = cpl==1 || cpl==3;
      int adv = cpl==2 || cpl == 4;
      int cclear = cpl==8 || cpl==10;
      if (format != 101 && format!=202) report(0);
      if (!spec) actual_intr = 2;
      if (cclear) actual_intr = 3;
    }I compile this program with gcc -O2 -fno-inline -S. Note that the -fno-inline flag is there to prevent inlining from occurring; I can reproduce the behavior without the flag on code examples large enough that the internal compiler rules limit inlining. (But they're way too large to post here.)
    The generated assembly is:
            .global evaluate_M_int_ld
    evaluate_M_int_ld:
            sethi   %hi(format),%o5
            sethi   %hi(cpl),%o4
            ld      [%o5+%lo(format)],%g4
            ld      [%o4+%lo(cpl)],%o5
            cmp     %o5,1
            be,pn   %icc,.L77000052
            cmp     %o5,3
    .L77000051:
            be,pn   %icc,.L77000052
            or      %g0,0,%g3
    .L77000053:
            xor     %o5,8,%o0
    <snipped a bunch of irrelevant stuff here>
    .L77000052:
            retl    ! Result =
            nopSomehow the "spec" calculation is branching to the end of the function. To make the problem even weirder, removing the unused adv variable results in correct compilation. If the __inline__ keyword is left out, the generated code is fine.
    The obvious workaround for now is to use -D__inline__= -Dinline= on all of my compiles.
    The compiler version and tool information is:
    telyn-haul1% gcc -v
    Using built-in specs.
    Target: sparc-sun-solaris2.10
    Configured with: /net/clpt-v490-1/export/data/bldmstr/20070711_mars_gcc/src/configure prefix=/usr/sfw enable-shared with-system-zlib enable-checking=release disable-libmudflap enable-languages=c,c++ enable-version-specific-runtime-libs with-cpu=v9 with-ld=/usr/ccs/bin/ld without-gnu-ld
    Thread model: posix
    gcc version 4.0.4 (gccfss)
    --David                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Adding -W2,-Rcond_elim to the existing flags does make both the small example and the original code compile correctly.
    --David                                                                                                                                                                                                                                                               

  • Preventing Netbean's UML code generation problem

    When I generate code from my UML diagram in netbeans, how do I prevent it from making a local version of java api classes and interfaces?
    Example: I have classes that extend JFrame. When I generate the code, it puts and an empty JFrame class in my source package.

    This is a Java forum and not a Netbeans one.

  • Model interface toolkit (MIT) code generation failes in simulink

    Hello,
    I'm running into an odd Simulink Coder failure and I can't tell if this is due to an NI/MIT but or a general Simulink Coder issue.
    System:
    Windows 7
    Matlab/Simulink R2013b w/ Simulink Coder
    MIT 2013 SP1
    System target file = "NIVeriStand_VxWorks.tlc"
    Not that we even get to this point but... my "WindRiver GNU Toolchain Setup Path" is properly configured to: c:\gccdist\supplemental\setup-gcc.bat
    The attached image shows the error I'm getting:
              "Error: Invalid character in: 'SMA_model/SMA Driven Arm/wire/Heat Transfer Model/ ', exiting code generation. The name cannot end with / character".
    In the image you can see that the "Heat Transfer Model" subsystem in fact does not have a "/" in the name. 
    Has anyone else ever run into this code generation problem before? If so, any suggestions on how to get around it?
    Thanks.
    Solved!
    Go to Solution.
    Attachments:
    SimulinkCoderError.png ‏92 KB

    That error is actually being reported by Simulink® before the build process begins. I'm guessing you would see it regardless of the TLC file you choose. Interestingly, in my tests here Simulink® doesn't allow me to leave a subsystem with a "/" at the end of the name. It automatically changes the name back to what it was before I tried to add the "/." That same error you see in the compilation window is displayed in the command line output when I attempt it. It looks like I'm running a different version than you though. 
    The screen shot doesn't really confirm the subsystem block name itself, at least the hierarchy at the top of the window appears to have parsed out all backlashes. Could you provide a screenshot of the heat transfer model subsystem block? 
    MATLAB®, Simulink®, and Real-Time Workshop® are registered trademarks of The MathWorks, Inc.  All other trademarks are the property of their respective owners.
    Applications Engineer
    National Instruments
    CLD Certified

  • Problem with Web Service Model code generation

    Hello,
    I'm importing two different web services into the same web dynpro component, which both contains properties "allGroup2" of type "All2".
    This causes some problems with the code generation, first of all the Model-classes can't be generated because they don't know which of the two All2-classes to use. If I fix that problem (which can be easily done by adding the correct import statement) I still can't use the models in my web dynpro component, since it too doesn't know which of the All2-classes to use.
    Even though I can fix this by adding imports and fixing the code, it of course gets regenerated next time I rebuild the project, and my changes are lost.
    Does anyone know how to solve this?

    Apparently this is a known bug which is fixed in SP15.
    Regards mattias

  • Refactor - Renaming Problem Auto Code Generation

    After renaming the java source files (backing beans) to upper case letters (ex. from console.java to Console.java),
    JSC is not able to instantiate this class anymore, because the managed-bean.xml is altered automatically.
    The next problem is the jsp-file. JSC produces some useless code which points to the new (by JSC) created managed beans (old ones still exist)
    example (jsp):
    </ui:body>
    </ui:html>
    </ui:page>
    </f:view>
    <ui:body binding="#{request$console.body1}" id="body1"/>
    (managed-beans.xml)
    <managed-bean>
    <managed-bean-name>request$console</managed-bean-name>
    I�m not able to delete this generated code, because after saving and reloading the jsp-file the inserted code is still there.
    In the projects view my java source files are shown in small letters, even if the files are in upper case on the file system (explorer).
    I�m using Studio Creator 2 Update 1 (Build 060915)
    The project can only be deployed (exporting *.war in JSC) and executed when i change the file attributes to read-only after editing them with a standard text editor.
    Any suggestions?

    Hi Naveen,
    I found these two fms's which would enable automatic item code generation. See if it helps you.
    declare @temp as char(20)
    IF $[OITM.ItmsGrpCod] = 101
    BEGIN
    set @temp=(select isnull(max(right(ItemCode,4)),0) + 1 from OITM where (ItmsGrpCod= 101) and (len(ItemCode)=7))
    set @temp='DRM'+isnull(replicate(0,4-len(@temp)),'')+@temp
    select cast(@temp as char(20))
    END
    ELSE IF $[OITM.ItmsGrpCod] = 102
    BEGIN
    set @temp=(select isnull(max(right(ItemCode,4)),0) + 1 from OITM where (ItmsGrpCod= 102) and (len(ItemCode)=7))
    set @temp='PKG'+isnull(replicate(0,4-len(@temp)),'')+@temp
    select cast(@temp as char(20))
    END
    And:
    DECLARE
    @NUM AS CHAR(7)
    SET @NUM =
    (SELECT RIGHT(MAX(CardCode), 7) FROM OITM)
    SET @NUM = @NUM + 1
    BEGIN
    IF @NUM IS NULL OR @NUM = 0
    BEGIN
    SELECT 'I0000001'
    END
    IF @NUM < 10
    BEGIN
    SELECT 'I000000' + @NUM
    END
    IF @NUM > 9 AND @NUM < 100
    BEGIN
    SELECT 'I00000' + @NUM
    END
    ----COMPLETE THE CODE
    END
    Thanks,
    Joseph

  • Error during distribution for compiled code generation-Reply

    Hi,
    Looking at your error messages, it looks as though your build is failing during the code generation phase of an autocompilation. To determine why the code generator crashed, either look in the $FORTE_ROOT/log/forte_ex*.log files or don't use autocompilation and use fcompile.
    There are many reasons why the code generator could crash. Some of the things I've come across are running out of memory and trying to find invalid classes.
    If its the invalid class problem you'll find a message like:
    Generating code for partition BLTCustomWindow_cl0_Part1.
    ERROR: Exiting due to following exception:
    SYSTEM ERROR: Client partition FTCompile_cl0_Client was terminated by escaped
    exception. See the remainder of the error stack for more information.
    Class: qqsp_ResourceException
    Error #: [1001, 3]
    Detected at: qqrt_ForteExecAgent::LoadPartition at 1
    Error Time: Tue Aug 18 17:52:44
    Exception occurred (locally) on partition "Forte_Executor", (partitionId =
    9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
    [9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
    "FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
    FATAL ERROR: Invalid class ProductBMServices.ProductSecurityMgrProxy
    (0x4ecd,0x19a)
    Class: qqsp_ImplementationException
    Detected at: qqcg_TRclass::SetClass at 2
    Last TOOL statement: method ForteCompiler.ProcessPGF
    Error Time: Tue Aug 18 17:52:44
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = 9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1, taskId =
    [9EA25A00-36FE-11D2-87C4-502F15BEAA77:0x1.6]) in application
    "FTCompile_cl0", pid 28331 on node stardev in environment <unknown>.
    The solution for this instance is to clean up the invalid classes using the c4tstdrv utility.
    c4tstdrv > setrepos star8
    c4tstdrv > setwork dmcompiledbuild
    c4tstdrv > open
    Type Service Flags Level
    err sh * 255
    trc rp 1 4
    c4tstdrv > findproj productbmservices
    c4tstdrv > cleanuprtclasses
    Removing extraneous RTclass ProductShootingLocationMgrProxy
    Removing extraneous RTclass PRTerritoryBaseMgrProxy
    Removing extraneous RTclass PRTerritoryMgrProxy
    Removing extraneous RTclass TalentBaseMgrProxy
    Removing extraneous RTclass TalentTypeMgrProxy
    Removing extraneous RTclass TitleTypeBaseMgrProxy
    Removing extraneous RTclass TitleTypeMgrProxy
    Removing extraneous RTclass ProductSecurityBaseClass
    Removing extraneous RTclass ProductSecurityBaseQuery
    Removing extraneous RTclass ProductSecurityQuery
    Removing extraneous RTclass ProductSecurityMgrProxy
    c4tstdrv > commit
    c4tstdrv > exit
    Integrate the changes to the workspace, start the build again and this should have cured the problem.
    However, its hard to know what the cause of your problem is without seeing the output in the log files.
    Good luck.
    Mark Carruthers
    20th Century Fox
    "Forte Consultants" <[email protected]> 01/22/99 08:35am >>>
    Hi,
    I'm doing application distribution for my application using a fscript
    script and am forcing compilation on 2 of my partitions.
    This I have been doing from quite sometime successfully. Recently I
    developed a new service and plugged it into my application for
    deployment.
    I'm successfully able to distribute & deploy the interpreted code. But
    I'm getting a long list of system errors when I try doing distribution
    for compiled code. And I see only one of the .exe generated instead of
    two because of which I'm unable to go ahead with installaion. I would
    appreciate if anybody let me know why this's happening ?. The following
    is the main chunk of this error list.
    Thanks in advance.
    --Anand Ramaswamy
    SYSTEM ERROR: Cannot resolve the distributed reference for an object of
    class
    (qqlo_Object) named (<Unknown>) for the reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 144]
    Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
    Error Time: Fri Jan 22 10:44:22
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Can not initially communicate with the object named
    (Unnamed),
    which is supposed to be in partition
    (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
    Class: qqsp_DistAccessException
    Error #: [601, 140]
    Detected at: qqdo_ProxyMgr::CheckAccess at 1
    Error Time: Fri Jan 22 10:44:22
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Attempt to send to unknown destination partition
    (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1).
    Class: qqsp_DistAccessException
    Error #: [601, 102]
    Detected at: qqdo_PartitionMgr::SendMsg at 1
    Error Time: Fri Jan 22 10:44:22
    Distributed method called: qqdo_InternalMessage.<Message> (object
    name
    Unnamed) from partition "CodeGenerationSvc_cl0_Part1-router",
    (partitionId
    = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.2]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Partition (32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x616:0x1)
    no
    longer exists. The process associated with the partition probably
    terminated.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::CheckStarted at 1
    Error Time: Fri Jan 22 10:44:22
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: This method invocation is being retried because the
    failures
    shown below and the fact that the dialog duration is MESSAGE. This is
    try #2.
    Class: qqsp_DistAccessException
    Error #: [601, 54]
    Detected at: qqdo_Message::Failed at 1
    Error Time: Fri Jan 22 10:44:19
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: The load balanced router is disabled or has no members.
    This
    can happen if all of the members terminated or failed.
    Class: qqsp_DistAccessException
    Error #: [601, 161]
    Detected at: qqdo_LbRouter::Route at 1
    Error Time: Fri Jan 22 10:44:19
    Distributed method called: GenerationMgrProxy.GeneratePartitionCode
    (object name
    site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
    from partition "Fscript_cl9_Client", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.2]) in application
    "fscript",
    pid 4b81 on node MOOSUP in environment IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: This method invocation is being retried because the
    failures
    shown below and the fact that the dialog duration is MESSAGE. This is
    try #1.
    Class: qqsp_DistAccessException
    Error #: [601, 54]
    Detected at: qqdo_Message::Failed at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (locally) on partition "Fscript_cl9_Client",
    (partitionId = 32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1,
    taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.1]) in application
    "fscript", pid 4b81 on node MOOSUP in environment IGTSDENV.
    SYSTEM ERROR: Access to a load balanced router member (which is a
    service
    object) failed for the reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 162]
    Detected at: qqdo_LbRouter::Route at 2
    Error Time: Fri Jan 22 10:44:15
    Distributed method called: GenerationMgrProxy.GeneratePartitionCode
    (object name
    site/codegenerationsvc_cl0/codegenerationsvc_cl0-codegensvc)
    from partition "Fscript_cl9_Client", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614.3]) in application
    "fscript",
    pid 4b81 on node MOOSUP in environment IGTSDENV
    Distributed method called: qqlo_Object.<Message> (object name
    Unnamed)
    from partition "Forte_Executor", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: Cannot resolve the distributed reference for an object of
    class
    (qqlo_Object) named (<Unknown>) for the reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 144]
    Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 10
    Error Time: Fri Jan 22 10:44:15
    Distributed method called: qqlo_Object.<Message> (object name
    Unnamed)
    from partition "Forte_Executor", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: This distributed reference was previously invalidated due
    to the
    reasons below.
    Class: qqsp_DistAccessException
    Error #: [601, 132]
    Detected at: qqdo_ProxyMgr::ResolveOutGoingProxy at 3
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Asynchronous Failure: Recieved a close from the network
    partner:
    Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
    193.1.11.26 %LINKDISCON, network partner disconnected logical link
    Event 4
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    SYSTEM ERROR: This method invocation is being retried because the
    failures
    shown below and the fact that the dialog duration is MESSAGE. This is
    try #1.
    Class: qqsp_DistAccessException
    Error #: [601, 54]
    Detected at: qqdo_Message::Failed at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Fri Jan 22 10:44:15
    Distributed method called: qqlo_Object.<Message> (object name
    Unnamed)
    from partition "Forte_Executor", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615.12]) in application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    INFORMATION: Asynchronous Failure: Recieved a close from the network
    partner:
    Internet Location - Host: moosup.iroquois.com Port Number: 2504 Dot:
    193.1.11.26 %LINKDISCON, network partner disconnected logical link
    Event 4
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Fri Jan 22 10:44:15
    Exception occurred (remotely) on partition
    "CodeGenerationSvc_cl0_Part1-router", (partitionId =
    32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x615:0x1, taskId =
    [32271CD0-4E62-11D2-AF29-9F40A9E1AA77:0x614:0x1.10]) in
    application
    "CodeGenerationSvc_cl0", pid 7487 on node MOOSUP in environment
    IGTSDENV.
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hi,
    If this INCLUDE is in a function group go the MAIN program and activate from there.
    Can you list out the include name?
    a®

  • Generic oracle eway code generation error in Java caps 5.1.3

    Hi,
    I'm using an oracle eway for adding records to a table. I have a prepared statement in the otd. When I try to build the project I'm getting the following error. Could any one let me know how this problem can be fixed?
    com.stc.codegen.framework.model.CodeGenException: Generic Oracle eway code generation error(ERROR_CODEGEN_GENERIC_CODELET_GENERAL)
         at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1860)
         at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.processCodelets(CodeGenFrameworkImpl.java:640)
         at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1544)
         at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
         at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
         at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
         at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
         at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
         at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
         at org.openide.util.Task.run(Task.java:136)
         at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
    Caused by: com.stc.codegen.framework.model.CodeGenException: Exception when generating OTD code ...Exception: javaClass: Oracle_std_otdOTD: Exception when invoke DB Codegen Task...Exception: Invalid parameter type: Class : [Std_insert_PreapredStat] Object: [Param1] Param Type : [DECIMAL].(ERROR_CODEGEN_DB)(ERROR_CREATE_OTD)
         at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateOtdJarFile(OracleEWayCodeletFactory.java:2045)
         at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1756)
         ... 10 more
    Regards,
    Abdul

    hi...
    i too getting same problem..how did u reslove this...
    please help me out...
    thanks in advance
    KK

  • NI Motion Assistant LabVIEW Code Generation Error

    Hello, the following is my current setup:
    NI PCI-7334 motion control board
    NI UMI 7774 splitter board
    3 x NI P70530 Drives
    3 x NI CTP12ELF10MAA00 Stepper Motors
    3 x Power supply units for drives
    LabVIEW 2010
    NI Motion Assistant 2.6
    Motion and Automation Explorer 4.7
    I have built a three axis motion system that I am trying to configure with labview. After verifying that everything was set up correctly, I opened MAX, updated the firmware to my motion control board, and intitialized the controller. Since then, I have created many basic programs using the Motion Assistant Software to test the movement of my device. Everything works fine while using the Motion Assistant software (I have three axis movement, multidirectional control, and can perform various straight line and arc moves). My problems begin when I try to use the code generation feature.
    When trying to use the code generation feature to output a labview diagram, I run into a problem where a dialog box pops up and says "Find the vi named ...."
    Some examples of the names that come up are: Configure Vector Space.flx, Vector Space To Control.flx, Motion Error Handler.flx.
    To be clear the program in Motion Assistant that I am trying to export to LabVIEW code is composed of two individual steps. One that tells X,Y, and Z motors to move forward 25 revolutions, and one step that tells them to move backwards 25 revolutions.
    I have made many other programs in Motion Assistant that run fine, but I always receive similar errors when trying to use the code generation feature to export to LabVIEW. Is there something that I can do to solve my problem?
    Thank you for your help.

    Hi Joe,
    I am using Ni-Motion Assistant 2.6, Ni-Motion 8.1, and Motion and Automated Explorer version 4.7.
    The code I posted is supposed to tell Axis 1 to move 40 revolutions at 400 rpm. It works fine in Ni-Motion Assistant but when I try to generate a LabVIEW diagram I receive the following error, "Find the VI named 'Motion Error Handler.flx'". I have had it search my directory, as well as the disk that I installed both LabVIEW and Ni-Motion but no luck. Thanks for your help.
    Attachments:
    1111.vi ‏9 KB
    1 axis movement.zip ‏8 KB

  • Code Generation and Optimization

    hi,
    we have been looking into a problem with our app, running in a JRockit JVM, pausing. Sometimes for up to a second or so at a time.
    We enabled the verbose logging of codegen and opt.
    And we see entries like:
    [Fri Sep  3 09:51:38 2004][28810][opt    ] #114 0x200 o com/abco/util/Checker.execute(Lcom/abco/util/;)V
    [Fri Sep  3 09:51:39 2004][28810][opt    ] #114 0x200 o @0x243c4000-0x243c7740 1186.23 ms (14784.88 ms)
    So the optimization took 1186 ms.
    Does this optimization happen in the main thread?
    I.e., is the above message an indication that the app had to stop for 1186ms while the optimization occurred?
    Any help on this would be greatly appreciated!
    Also, does anyone have any more pointers to info on the code generation and optimization in JRockit?
    I have only managed to find the following:
    http://edocs.beasys.com/wljrockit/docs142/intro/understa.html#1015273
    thanks,
    JN

    Hi,
    The optimization is done in its own thread and should not cause pauses in your application.
    The probable cause for long pause times is garbage collection. Enable verbose output for gc (-Xverbose:memory), or use the JRockit Management Console to monitor your application. Try using the generational concurrent gc, -Xgc:gencon, or the gc strategy -Xgcprio:pausetime. Read more on: http://edocs.beasys.com/wljrockit/docs142/userguide/memman.html
    If you allocate a lot of small, shortlived objects, you might want to configure a nursery where small objects are allocated. When the nursery is full, only that small part of the heap is garbage collected at a smaller cost than scanning the whole heap.
    If you need help tuning your application, you could make a JRA recording and send to us: http://e-docs.bea.com/wljrockit/docs142/userguide/jra.html.
    Good luck,
    Cecilia
    BEA WebLogic JRockit

  • Code generation error when implementing an accumalator

    Hi everyone,
    I am implementing an accumalator which implements X = X + Y where X and Y are memories of length say 5. Initially I write 5 values into X and Y using a for loop. Then I perform the addition inside a single cycle timed loop and store the results in a temporary buffer(another memory) again of length 5. In another single cycle timed loop, I copy the data from the temporary buffer to memory X.
    I changed the arbitration option to never arbitrate for X, but I get a code generation error because of arbitration. Could anybody please tell how to solve this problem.
    Regards,
    Prashant
    Solved!
    Go to Solution.

    Hi NitzZ
    I figured out a way to solve the problem. I chose the "Never Arbitrate" option for all memories and replaced the for loop with a timed loop. Now there are no errors.
    Thanks,
    Prashant

  • Code generation bug in C++ 5.0

    The enclosed test program generates incorrect code
    with C++ 5.0 when -g is not used.
    The problem showed up in our production code
    and concerns any reference counted smart pointer
    implementation.
    The test program is specifically written to demonstrate
    the problem and diagnose a reference miscount.
    With any optimization at all (without -g, and/or with
    any level of -O including no -O) it generates
    incorrect results. With -g the results are correct.
    gcc compiles this correctly with any optimizations
    selected.
    // main.cc
    // test program to demonstrate code generation bug in
    // Sun WorkShop Compilers C++ 5.0
    // bug exhibited as of 27th April 2001
    // relevant patches applied:
    // 107289-05 Packages: SPROcc
    // 107390-12 Packages: SPROtl7x, SPROsclx, SPROtll7x, SPROcplx, SPROlgcx
    // 107311-12 Packages: SPROscl, SPROtll7, SPROtlbn7, SPROcpl, SPROgc, SPROlgc
    // 107357-11 Packages: SPROlang
    // correct behaviour with CC -g:
    // CC -g main.cc -o main; ./main
    // incorrect behaviour with CC (no -g):
    // CC main.cc -o main; ./main
    #include <stdio.h>
    class O {
    public:
    inline O() : m_refCount(0) { };
    inline void ref() { m_refCount++; }
    inline void deref() { m_refCount--; }
    inline int refCount() { return(m_refCount); }
    private:
    int m_refCount;
    class R {
    public:
    inline R() : m_object(0) { };
    inline R(const R &r) : m_object(r.m_object) { if (m_object) m_object->ref(); }
    inline R(O *o) : m_object(o) { if (o) o->ref(); };
    inline ~R() { if (m_object) m_object->deref(); }
    inline R &operator =(const R &r) {
    if (this == &r) return(*this);
    O *o = m_object;
    if (m_object = r.m_object) m_object->ref();
    if (o) o->deref();
    return(*this);
    inline R &operator =(O *n) {
    if (m_object == n) return(*this);
    O *o = m_object;
    if (m_object = n) n->ref();
    if (o) o->deref();
    return(*this);
    inline operator O *() const { return(m_object); }
    inline O *operator ->() const { return(m_object); }
    private:
    O *m_object;
    class B {
    public:
    inline B(const R &r) : m_ref(r) { };
    inline const R &ref() { return(m_ref); }
    private:
    R m_ref;
    R buggy(int notnull, B &b)
    return(notnull ? b.ref() : 0); // BUG HERE
    int main()
    O o;
    R r(&o);
    B b(r);
    int i;
    for (i = 0; i < 20; i++) {
    R s;
    s = buggy(!0, b);
    printf("refCount: %d (should be 2)\n", o.refCount());

    How do I file a bug report for this and get
    a bug ID assigned?

  • Code Generation Error - SUP 2.2 / SUW 2.2

    Hi,
    I have formatted my laptop PC and re-installed Sybase Unwired Workspace 2.2. After the installation I get Code Generation Error message:
    Before Code Generarion attemp the Java Build Path / Source tab is empty and after the Code Generation the error specified above is generated and the following path is added to the Java Build Path / Source tab:
    XXX/Generated Code/src (missing)
    I cannot resolve the problem. Does anybody has idea about the problem?
    thanks,

    Hi,
    1. I created a new model having only one MBO and generated code successfuly.
    2. The result is the same after deletion of "Generated Code" and creating new folder
    3. The result is the same after generation code to another folder.
    nothing has changed but I discovered additional information in the "workspace\.metadata\.log" file:
    com.sybase.uep.tooling.codegeneration.coordinator.CoordinatorException: Member not found: inverseClass on object com.sybase.afx.compiler.AttributeDef@2a3881
      at com.sybase.uep.tooling.codegeneration.coordinator.impl.ClientObjectAPICoordinator.sendRequest(ClientObjectAPICoordinator.java:115)
      at com.sybase.uep.tooling.codegeneration.ui.CodeGenerationJob.sendRequest(CodeGenerationJob.java:200)
      at com.sybase.uep.tooling.codegeneration.ui.CodeGenerationJob.processTasks(CodeGenerationJob.java:172)
      at com.sybase.uep.tooling.codegeneration.ui.CodeGenerationJob.runInWorkspace(CodeGenerationJob.java:123)
      at org.eclipse.core.internal.resources.InternalWorkspaceJob.run(InternalWorkspaceJob.java:38)
      at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
    Caused by: com.sybase.uep.tooling.codegeneration.clientobjectapi.ClientObjectAPIException: Member not found: inverseClass on object com.sybase.afx.compiler.AttributeDef@2a3881
      at com.sybase.uep.tooling.codegeneration.coordinator.CoordinatorException.<init>(CoordinatorException.java:27)
      ... 6 more
    Caused by: com.sybase.modeling.templatej.runtime.adapter.impl.NoSuchMemberException: Member not found: inverseClass on object com.sybase.afx.compiler.AttributeDef@2a3881
      at com.sybase.uep.tooling.codegeneration.CodeGenerationException.<init>(CodeGenerationException.java:26)
      at com.sybase.uep.tooling.codegeneration.clientobjectapi.ClientObjectAPIException.<init>(ClientObjectAPIException.java:27)
      at com.sybase.uep.tooling.codegeneration.clientobjectapi.impl.ClientObjectAPIDelegator.generate(ClientObjectAPIDelegator.java:155)
      at com.sybase.uep.tooling.codegeneration.coordinator.impl.ClientObjectAPICoordinator.sendRequest(ClientObjectAPICoordinator.java:86)
      ... 5 more

  • UML associations and code generation don't work

    Hello,
    I've maid a Class Diagramm in JSE 8, class generation works great, but I have a problem with associations : they are not generated (ie no attributes in class files). I've tried to give association name and also named both ends, but nothing better.
    Thanks for your help.
    PS : navigable association seems to work great.

    Thanks for your valuable feedback and sorry for the inconvenience.
    I already submitted a request for enhancement (RFE) for automatic code generation for Association links. As for the documentation issue, I'm not able to replicate your problem. I'm seeing all comments in the source that I entered in the documentation panel. Could you please kindly provide me detail steps to reproduce the case that you don't see documentation generated in the code and I'll try to help you. Thanks!
    --Peter                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Maybe you are looking for