Preventing update to COPA tables for a particular Sales order type

Hi ,
We need to have incoming sales order transfer to COPA activated only for one particular sales order type activated.
Earlier we implemented note 571697 for user exit to allow COPA update only for particular sales order type.
This prevented the transfer of SO to actuals table, but off late the performance for VA01 and VA02 has decreased substantially.
Upon checking, we found this is happening because of other CE4XXXX tables (excluding CE1XXXX) which are getting updated during creation/ change of SO. as the data in these tables is huge .
If possible, please advise, right userexit to prevent update to these tables.
Thanks.
Neeraj

Thanks for your inputs..I have few more queries on same.
Initially we had incoming sales order activated in KEKF allong with implemented SAP note 571697, which helped us to update CE1XXXX only for a particular sales order type. This was initial requirement to have system updating COPA values only for one particular sales order type.Also, KEQ3 was also activated which resulted in updates to CE4XXXX. This was not a problem initially since we had few sales orders now that plant has grown old with more sales order (resulting in huge size of CE4XXXX) VA01 is impacted..
Currently ,since we have KEQ3 activated so, Segment is created the moment we create sales order.. and table CE4XXXX is updated..
As most of you have suggested to switch off sales order in KEQ3, i need to analyze the impact of this..
From what i understand CE1XXXX will continue with updation for that order type... and CE4XXXX won't be updated in future..Please correct me if i am wrong..
Also, please advise what all can be possible impacts on COPA reporting if I switch off from now onwards (client has been using this since long) , and what all should be the precautions that i should take while doing this.
Thanks

Similar Messages

Backend Tables for Chargeback regarding Sales Order.

Hi,
I am Searching for the tables Chargeback Data regarding Sales Orders, and also Joins for sales tables.
Can any one help me in this.
Thanks in Advance
Regards
Vamsi...
Edited by: 965678 on Apr 29, 2013 6:05 AM
Edited by: 965678 on Apr 29, 2013 6:42 AM

Thanks for your inputs..I have few more queries on same.
Initially we had incoming sales order activated in KEKF allong with implemented SAP note 571697, which helped us to update CE1XXXX only for a particular sales order type. This was initial requirement to have system updating COPA values only for one particular sales order type.Also, KEQ3 was also activated which resulted in updates to CE4XXXX. This was not a problem initially since we had few sales orders now that plant has grown old with more sales order (resulting in huge size of CE4XXXX) VA01 is impacted..
Currently ,since we have KEQ3 activated so, Segment is created the moment we create sales order.. and table CE4XXXX is updated..
As most of you have suggested to switch off sales order in KEQ3, i need to analyze the impact of this..
From what i understand CE1XXXX will continue with updation for that order type... and CE4XXXX won't be updated in future..Please correct me if i am wrong..
Also, please advise what all can be possible impacts on COPA reporting if I switch off from now onwards (client has been using this since long) , and what all should be the precautions that i should take while doing this.
Thanks

Payment terms for a particular sales order

Dear Gurus,
I want to trigger a particular payment term for a particular sales document type.
i.e., when i create a sales order with this particular sales document type the desired payment term should be copied into sales order by default. Is this possible.. please suggest.
thanks
suri

Dear Suri
As you would be aware, by default, Payment Term will flow in sale order from customer master. However, if you want to have a different payment term to flow automatically, then you have try with any of the following user exits.
User exits in the program MV45AFZZ - USEREXIT_READ_DOCUMENT
User-Exits in program MV45AFZB - USEREXIT_CHECK_VBAK
thanks
G. Lakshmipathi

Idoc not created for a particular sales order

Hi,
For a particular sales order , idoc is not created .
The idoc has to be generated when we create a sales order ,
but for a particular sales order , the idoc is not generated when the sales order is created. The program is assigned in
nace for output type zd00.
RSNASTED is the program which triggers the idoc and FM: IDOC_OUTPUT_ORDRSP.
How to debug and see why the idoc is not generated,
i had kept break point in idoc_output_ordrsp function module
and program rsnasted, but my control does not
reaches this point.
can anyone help me in this issue.
Thanks and regards,
A. thirumaran.
Edited by: thirumaran a on Jul 22, 2008 1:35 PM

Hi,
Could you please check if the output is processed or not, whether in the output type what all conditions you have maintained e.g send immediately.
Reward me point if you find this helpful.
regds.......
Sumit

How to fill conversion table TAUUM in BW for conversion of Sales Order Type

When importing sales order data from SAP ECC to SAP BI, conversion routine AUART can be used to convert Sales order Type from its internal representation to an external representation. (For example, the standard sales order has an internal Sales Document Type code TA, and an external code OR).
The standards SAP conversion routine AUART uses table TAUUM as a lookup table. This table has lots of data in SAP ECC, but it is empty in SAP BW.
How can we copy data from table TAUUM in ECC to table TAUUM in BW?
Do we have to create a maintenance view on the table, and type in the entries? Or is there a more automated way?

Hi Jay,
Make sure the extract structure is active. You can check the same from LBWE > 11: SD Sales BW> MC11VA0STI is active.
If the extract structure is active. Inorder to fill the setup table. First delete the setup table for the application area 11 from SBIW transaction. Then fill the set-up table for the application area 11 as you did for deliveries.
Then check whether data source is pulling data.
Let me know if there is an issue even after following the above steps.
Thanks & Regards,
Namrata

Report or table for the changed sales orders

Hi Friends,
Does anyone know of the standard report with which we can track all the sales orders where the changes have been made in particular date range?
If not standard report then atleast the table or the structure where the value is stored.
I know that we can track the orders one by one but I am looking for a list of orders.
Thanks in advance.
Regards
Karan

Hi,
Try CDHDR for header and CDPOS for items.
The only trick here is finding the object.
Reward points if useful
Regards,
Amrish Purohit

Item condition for only one particular sales order type, manual condition.

Hi Gurus
We have one condition ZXXX, item condition and it should process manually for one particular order type, ZOR. it should not process for other document types like ZOR1 etc.
i did create condition table with S.org/dis chn/div/ sales.doc type. and kept in access seq. and same in condition type ZXXX. and mainatined condition record as with sales area and doc type ZOR.
condition type settings ate like item condition and manaula entries - no limitation.
in pricing procedure i didnt checked manaul, mandoatry and statistic.
but whn iam craeting in ZOR1 and giving manually condition ZXXX, its accepting but as per our condition record it should get only for ZOR... where iam missing the seeting, please suggest.
Thanks
Ramki

Hi Ram,
In my point of view i think so you have to create the new document pricing procedure.
after creating that you have maintain new item catergory determination procedure using the new document pricing procedure created before.
assign this document pricing procedure to your ZOR document type.
now create new pricing procedure by copying the standard one.
after that do the assigning procedure for the pricing procedure by using the new document pricing procedure.
then try to create the order with ZOR and also with ZOR1
Make sure that your condition type is not assign to any other pricing procedure.
if it happens then let me know also.
Suneet Prakash

Table for errors on sales order

Sincere.
I would like to know, where in CRM can I get table of errors, that can be shown at sales order.
I already know about table T100, which includes all the texts for specific errors, but where can I get this errors. I would like to generate a report about errors, and cannot find specific values to relate report to.
Any help would be appreciated.
Regards,
Matej Meglič

No, that is not answer that I want.
I would like to know name of the link-table between sales-order and table-for-errors. T100 includes only the texts of errors, I am more interested in smknd of log. How are those two related?

Order Related Proforma Invoice for Free delivery Sales Order Type

Dear All ,
The requirement is as given below :
We need to create an Proforma Invoice for Free Delivery order type (FD) . The item cat is TANN with
Pricing              B
Billing Relevance    A
The Pricing procedure is Free of charge - Zvar6. with R100 % dicount condition type .
Created Proforma ZF9 with doc pric "C". Maintained copy control .Between ZF9 and FD ( order related biling).with the following :
Copying requirements   008 Item/ord.pro forma
Data VBRK/VBRP         000
Billing quantity     C
Pricing type         G
The condition record is R100 is captured in the order and the net value becomes zero . But when i create Proforma Invoice ZF9, the Dicount condition R100 is not copied into the Billing document ( ZF9). I am not able to understand where the mistake is .
Can any one give their inputs .
Thanks in advance
Veera

Hello Veera
kindly check whether free good determination is activated for the combination sales org, dist channel, division, document pricing procedure(C), cust pricing procedure, free goods pricing procedure.
thank you
Anirudh

Blocking creation of particular sales order type

HI ,
I initially my sales order type was ZMF , so many sales order are open , as of now I want to block the creation one new sales order of type ZMF,
Please guide me

Hi Sunaina,
Simply go to the details of ur doc. type (i.e in Define Sales Doc. types in SPRO) & put "X" in the "Sales Document Block" field on the top right of the order type.
This will block d usage of this particlar doc type.
Hope it helps. Plz close the thread if answered.
regards

Simple credit check - value need to be blocked from particular sales order to be post in f.35

Dear Expert,
I have a case here to find, the client uses simple credit check , we have different order types ( Example 6 order types), out of which we want to restrict the value of one order type to be posted in f.35 i.e the value should not effect credit limit used or open sales order.
Is there any standard procedure by which this can be done or do we have to use userexit.
Also can i know in which screen do we have to keep the userexits so that the value of the order type will not have impact on the f.35 or crdit limit used.
Regards
Abhishek Ojha

Sorry small correction to my initial post.
Even though you removed the credit group for the respective sales order type still system update the values subject to if the respective item category the "field credit active" active.
Removing the credit group to sales order type controls whether you want to perform the credit check or not. And your requirement is not to update the particular sales order document values in FD32 so the actual control is credit active field for that particular item category.
Since you have mentioned that you don't want to update that particular sales order document values( assuming that you are taking about receivable only).
Please note sales order determines the item category, so do as below.
De select( un check) the credit active field in the item category which is determined based on the sales order type for which you don't want to update credit values.
Please test and update here.So far I did not check this in my system.
thanks,
Srinu.

Table of Classification of SALes order

Dear Guru .,
Please sugest me the table for Classification of SALes order.
Tx.
RAjnish Sahay

hi,
Are you referring to sales document type?
All teh sales document details can be fetched from the tables VBAK (Header), VBAP( Item), VBPA (Sales document flow), VBRK (Header ), VBRP (Item).
Please provide with more details for further clairification.
Regards,
Mansi.

Delivery Completed for Material in sales order....

Hi Experts,
I want to know the table for Materials of sales order which are completed delivery.
e.g. : Order Qty. 5 Nos.
        Delivery Qty. 5 Nos.
     ================
      Balance is 0.
Pl. waiting reply.
YAB

Thanks Prabhu,
YUSUF

Reserve stock against one particular sales order and issue the same

Hi,
My client wants that he should he able to reservestock for a particular sales order only, so that during availability check, the stock is not issued against any other sales order.
I have tried to do stock reservation by using t-code MB21, then the stock gets transferred from Unrestricted stock to restricted stock.
When i Do the PGI, it is still reducing the unrestricted stock and the reserved stock is unaltered.
My client is not a manufacturing unit, they are basically into only trading of goods.
Can some one please suggest what steps can i do?
Also if tehre is any alternative to accomplish the same?
You can mail me any documnettaion regarding the same, is any on [email protected]
Thanks'
Priyanka

see when ur changing the stock from restricted use to unrestricted use then
its fine but as u mentioned while doing particular moment type you want the stock to get reduced from restricted use but not from unrestricted use
for this u need to change the moment type from 651 to some thing else because the moment type 651 will reduce the stock from restricted use and allocate to the customer
so maintain a diff moment type for ur particular order type ( means this particular order type has an itme cat which detrmines a schedule line cat in thth schedule line cat maintain a diff omnt type instead of 601)
well try 231

How to block sales order creating manually for a sales order type

Hi SD gurus,
My client wants for EDI orde type, the sales order should not be processed manually
how can i restrict this. I know to i can restrict this by not giving authorization
I want globally to maintain this.
thanks

Hi.
I think that the best way to do this is to create a field exit to data element AUART.
You will need an ABAP'er to create this field exit and associate the field exit to program SAPMV45A.
Doing this, you need create a customized table to maintain the sales order type permitted to manual creation.
You can use the program RSMODPRF to see all active field exits.
I believe that EDI orders in your process are created through BAPI, correct?
Waiting for response.
regards.

Preventing update to COPA tables for a particular Sales order type

Similar Messages

Maybe you are looking for