PREVIEW does not allow to print

- If you select all pages in a preview and try to print it prints only the first one.
- If you add PDFs JPGs to a PREVIEW and SAVE it does only save first page.
(those two problems are snow leopard related because i used to do it on leopard).
Is anyone know those problems and have any clue how to resolve it?
best regards,
Paulo

HI Paulo,
Perhaps the Preview preference file is corrupted after the upgrade.
Delete this file.
com.apple.Preview.plist
/Users/YourName/Library/Preferences. Drag that file to the Trash, empty the Trash and restart your Mac.
See if that makes a difference.
Also, check the manufacture web site for your printer and see if there are any updates available for your printer model for compatibility with 10.6. That could be part of the problem.
Some users are having luck with reinstalling the software that originally came with their printers. If you do not have the disk, go to the web site and download the drivers for 10.5. They might work.
Carolyn

Similar Messages

Create PDF which does not allow to print

My customer would like to use smartform HR_ESS_PAYSLIP_TO_PDF. The requirement is to convert the payslip to PDF, not allow to print the PDF.
The <b>no print</b> information should be included in the document itself.
I know this is generally possible because there a converters which have these option, e.g. http://www.abxzone.com/abx_reviews/paragon6/article_p3.html see "security ranging".
How can I set this up using smartforms?
Kind regards
Marcus

HI Paulo,
Perhaps the Preview preference file is corrupted after the upgrade.
Delete this file.
com.apple.Preview.plist
/Users/YourName/Library/Preferences. Drag that file to the Trash, empty the Trash and restart your Mac.
See if that makes a difference.
Also, check the manufacture web site for your printer and see if there are any updates available for your printer model for compatibility with 10.6. That could be part of the problem.
Some users are having luck with reinstalling the software that originally came with their printers. If you do not have the disk, go to the web site and download the drivers for 10.5. They might work.
Carolyn

Printing/Preview does not honour to printer page margins and garbles text

I have this weird problem with printing. When I print, e.g., a pdf using preview, the page comes out of the printer incorrectly, that is the top 2.2cm gets chopped off and some of the characters have become unreadable (especially the I, the :, and the J). When I print the same pdf from adobe reader, the page comes out fine...
The problem of chopping-off the top bit of a page also happens when I print directly from an application (e.g., thunderbird, firefox). Saving the print as PDF and printing that one with adobe reader again works fine.
The problems occurs only when I print on my Lexmark Optra E312L (using the generic Postscript printer). On our HP Photo Printer (B9180), everything works as expected.
I have already restarted the printing system, but while this did solve another printing problem, I still have this problem.
So my question is: anyone else experiencing similar problems (ie., top of print chopped-off and garbled text) and, better yet, is there a solution?
Thanks,
Hayo

Steve, thank you for trying to answer my question/solve my problem!
You suggestions, however do not fully help in my case though
I was already using the full printing dialogue, but nowhere did I find anything that might solve this problem. The print scaling, I did not want to use as I want the page to come out as-is (the pdf was an A4 and I print to A4). Note: border less printing or other ways of selecting a larger printable area doesn't work either; when I select the Lexmark, I have a very limited number of page size options and while it shows them, I can't use a custom page size (otherwise that could have solved the problem I guess).
I did expect some things to get chopped-off but then evenly from all sides (ie, where it can't print). This is not what happens when printing from preview though. Today I tried again and while the results are the same, I now understand better what Preview does: it chops off only the top bit (what it does left and right, I don't know yet). In my opinion this is an error on the part of Preview because that way you never get the page exactly as it was intended. Adobe Reader does this much better, so that is what I will be using from now on.
The other problem, the garbled text (mostly i's, j's, and :'s) is still there as well. So I guess there must be a problem in the printing engine of Preview in combination with the generic postscript driver...
Heck, it gets even more interesting: I also tested printing from Firefox directly. This results in an error flashing on the printer, the printout got out of the printer ok-ish though. When saving the output as PDF and printing that with Adobe Reader again, the printer does not generate an error AND (more importantly), the output is much better quality wise (the rendering of the fonts and greys is much better).
Right, I guess the lesson I learned here is not to use Preview/print directly when I want to print to the Lexmark and to take the route PDF->Adobe Reader->Lexmark instead.
Is there a way I can let Apple know about bugs? (the garbled text certainly is a bug, the other things may or may not).
Thanks again,
Hayo

I cannot add a printer. It is not listed under default, and does not allow me to add printer.

I cannot add a printer. It is not listed under default, and does not allow me to a add printer.

philw
Try some maintenance actions:
1) Reset Printing System:
http://support.apple.com/kb/PH14141
2) If that doesn't help, repair the hard drive and permissions after booting from the recovery partition:
http://support.apple.com/kb/ts1417
(go down to "Try Disk Utility")

Cannot preview SSRS report in Visual Studio 2012 - assembly does not allow partially trusted callers

Hi,
I have an SSRS report that works fine in Visual Studio 2008 BIDS. This report references a .Net assembly namely:
System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
I use this assembly in some simple Code functions in the report. e.g.
System.Web.HttpUtility.UrlEncode(inURL).ToString
I have converted the SSRS project to 2012 and am trying to preview the report. However, I get an error relating to: "That assembly does not allow partially trusted callers". If i deploy the rdl to my local SSRS it renders fine, but
how do I fix Visual Studio to preview the report without error? This is highly annoying.
My Visual Studio version is:
Microsoft Visual Studio Professional 2012
Version 11.0.61030.00 Update 4
Microsoft .NET Framework
Version 4.5.51641
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 11.0.3402.0
Any help is appreciated on this one.
Regards,
MrHH

Hi MrHappyHead,
According to your description, you used custom assembly in the report, when you run the report in Visual Studio 2008, the report works fine. When you run the report in Visual Studio 2012, the error message occurred: "That assembly does not allow partially
trusted callers". But the report works fine after you deployed it to report manager.
Only applications that are fully trusted by the runtime code access security system are allowed to access a shared managed code assembly that is not explicitly marked with the System.Security.AllowPartiallyTrustedCallers attribute. A partially trusted assembly
(one that is registered in SQL Server with the SAFE or EXTERNAL_ACCESS permission set) that attempts to access a strong-name signed assembly without this attribute causes a System.Security.SecurityException to be thrown. To troubleshoot the problem, please
refer to the following steps:
Add namespace system.security to AssemblyInfo.cs file
Add [assembly:allowpartiallytrustedcaller] to the file.
Set trust level to "Full" in web.config file
For more information, please refer to the following document:
http://support.microsoft.com/kb/2869522/en-us
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

My printer has a ornge led blinking and does not allow me to print any document. how can I fix it?

My printer is showing an error and the orange led is blinking ans dos not allow to print any document

Hello HP-1400. I understand your printer is an error state, which is preventing you from printing. I will do my best to assist you! Please provide the following information so I can perform troubleshooting:
The printer model number. For assistance in locating this information, please reference this HP document: http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bpy21016
Your operating system. If you require assistance locating this information, please reference this website: http://windows.microsoft.com/en-CA/windows/which-operating-system
Please respond as soon as possible. I'm only here to help!
Mario
I worked on behalf of HP.

I am trying to email from my iphone and the message comes up it is rejected by server, it does not allow relaying. I am receiving emails ok. How do I fix this

I am trying to email from my iphone and the message comes up it is rejected by server, it does not allow relaying. I am receiving emails ok. How do I fix this

What's the model number of your Lexmark printer?

Photosmart 2610 all-in-one Scan preview does not display

Recovering from a hard-disk crash, I've just reinstalled my Photosmart 2610 all-in-one using the driver and software package for Windows XP : rub_W01_Americas_Euro1_NB.exe. downloaded from the HP support site. All seems to be running well, except for a glitch when I try to scan: the document Preview does not display. I have made certain that the Preview checkbox is duly selected, but nothing seems to help. It is the same whether I'm scanning a picture or a document. It also makes no difference whether I launch the scan from HP Director or from within another application.
Note that if I click Accept, the document (or picture) will indeed be scanned and saved. But I won't see it until I open it with some other application.
Thoughts, anybody?
Thanks!
James

Hello James, welcome to the forums
I understand you are unable to see your scanned preview with your Photosmart 2610. I would suggest the guide below to use for troubleshooting steps for this issue.
Scanning Stops at the Preview Screen when the Printer is Connected to the Computer with a USB Cable ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Submit PDF Form by Email (does not allow connection)

It's been sometime since I have created a PDF which included a "Submit by Email" button. I opened the original form and changed the email addresses, saved it, then opened it in Reader. Whenever I try to submit it by email a "Security Block" window pops up stating "Acrobat does not allow connection to:" I have tried to call and pay for support but get the run around. I've searched the web and only found where I need to "Extend the Rights to Reader" which I did to no avail. I've even rebuilt the form from scratch...nothing.
Any help would be much appreciated!
Thanks....

I created the form first in Microsoft Word, then "printed" it to create a PDF. I then use Acrobat to create a bunch of fields, and set the form for distribution.
When the user completes the form in Acrobat, and clicks on the "Submit" button, an email is created with the form as an attachment, and the body of the message is this:
Instructions to add this form to a responses file:
1. Double-click the attachment.
2. Acrobat will prompt you to select a responses file.
Those are the instructions I was referring to. The question is, is there any way to change or eliminate those instructions?

Copying...hp envy 120 ...copy comes out dark and preview does not appear

trying copy on envy 120 comes out black print...have ink...preview does not show up on screen..

Hello,
Are you having an issue printing in color?
When you say copy, you mean printing from the PC, not actually doing a standalone copy from the front panel?
Please give a little more information about the issue you're having.

Preview does not show any postscript files

Preview does not show any .ps files in Mac OS 10.4.3. I get an error message "PostScript Conversion Error" when Preview tries to convert the ps file into pdf.
(I print online banking invoices to postscript using the print option "save as file", because the pdf option isn't always available as a file format.)
How can I view my ps files?
(this is a cross-post from the print/fax forum, as no one answered my question there)

Thanks for the tip. I downloaded Ghostscript, installed it but can't find it once installed and nothing has changed.
I did however find out that only my online banking PostScript files are unreadable. Other PS files I create with my Canon printer menu are automatically converted into PDF by Preview without a problem. So it must have something to do with the document header or whatever of the online banking files.

My Overdrive for my library books does not allow me to access the book that i am currently reading since IOS7 updated. also how do i now turn off the apps running in the background that are draining my battery?

my Overdrive for my library books does not allow me to access the book that i am currently reading since IOS7 updated. also how do i now turn off the apps running in the background that are draining my battery?

hey i m working on my illustrator and i m having many problems with my swatches
for example i use the green phosphorique i don't get this color i get another green
and many colors too it's like illustrator chooses for you the only green color
so please i kind of need help i can show you pictures of that i print screen viewed them.. so anybody who can help... pleaaaaaaaaaase contact me because i m having a project now..
my e mail is [email protected] i would be thankful
i even tried to download the illustrator on my friend's computer also i m having this problem ....

Rename with resequence does not allow 6 digits

OS: Win XP
Bridge: 3.0.0.464
Batch rename of files allows a sequence number that is limited to 5 digits. Even though the selector control allows you to specify six digits, the sequence number box does not allow the entry of the 6th digit. For example, I have the following:
New file name:
text: tf
sequence number: 40389
allow: Six Digits
If I attempt to enter the sixth digit, I get a "beep" and the entry is not allowed. The Preview at the bottom indicates:
Current file name: tf0001.cr2
New filename: tf0403980.cr2
It might also be useful to allow seven digits on the sequence number.
The motivation for this is to allow perpetual sequence numbers. I have named all of my digital images with the series tf######. At present, I have over 400,000 images in my system. This provides a unique image identification without restoring to additional information such as "date + subject". In this way, all images on my web pages are identified by this simple number and a customer can simply provide a file number as an image reference - no matter when the image was taken or for which event.

Be careful with setting the user agent to IE because that can make website send content (JavaScript and CSS) files that only work in IE and not in Firefox.<br />
Google Docs should work in Firefox with the normal settings, unless Ubuntu made some changes with their branded version that is causing problems on that site.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

When i am typing in a browser window, my browser page shifts slightly, highlights in blue, and does not allow me to keep typing. i have to keep clicking on the page to continue to type letter by letter...is there some function on that i don't know about?

When I am typing in a browser window, my browser page shifts slightly, highlights in blue, and does not allow me to continue typing...i have to click in the browser to allow typing to continue...is there a function running that I don't know about?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Pages on my ipad does not allow me to move objects. It works fine on iphone 4

The PAGES app on my ipad does not allow me to move objects, it works fine on my iphone 4

It helps if you describe what happens when you try to move an object in Pages...the sequence of events that you go through.....
Close Pages and reboot your iPad then try again. If that doesn't work, post back with more detailed information.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

PREVIEW does not allow to print

Similar Messages

Maybe you are looking for