Preview Sapscripts outputs in ITS

Hello.
We have ITS 6.10, and in our website, we have some reports for our customer's information, about accounting and payments, etc.
A link from this website, runs a R/3 report, via webgui.
On this report, the customer enter a security code, the language for the final report and a date range for the account information. Then, the report is displayed with all the information needed.
In Sapgui for Windows, the report ends with a graphically print preview, but in Internet Explorer, the report ends with a webgui screen with a subscreen that says:
"The page cannot be found.
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable. "
We have installed Acrobat Reader on the Wgate and Agate servers. Maybe you need some screenshots about this explanation. Please, send me a email for it.
Please, your cooperation.
Best regards,
Gustavo

Hi Gustavo,
I just started SO10 and displayed a sapscript document in the print preview with ITS 6.20 patch 19 in a SAP system with a 6.20 und a 4.6C basis. The document was displayed in adobe acrobat reader inplace in the webgui. A test with ITS 6.10 worked too, but because ITS 6.10 is no longer supported you should upgrade to ITS 6.20.
Best regards,
Klaus

Similar Messages

SAPscript Output Problem - Very Urgent - Please help

Hi,
I am having the following problem with SAPscript.
In the Main Window, I have instructions to the printer in the ZPL2 language (For Zebra Printer).
There are also several variables, which are highlighted in Gray and enclosed in the&.
There are also several elements all of them empty except for the one where this code is.
Now, I received this program to modify in terms of code and the output.
IF you have never done any work with Zebra Printing, the way it is done is that you create a label using the Zebra BarOne or Zebra Designer program, then output it to an itf file, upload it into a standard text as .itf and copy the uploaded contents to the main window. When printing to a Zebra printer, the Zebra printer will read the instructions and will print the output.
Here is the problem: The config for the output type is correct.
When doing a printing test from SAPscript, I get the right output and the Zebra printer is able to print it.
However, the real process for this task will go through MB02. There, if I create a spool request using the proper method (select output type and etc.), it will go the spool. However, if I print preview or output (doesnt work with the Zebra printer, so I have to output to the Laser printer), it will output the following (none of the following includes any of the ZPL2 code/instructions. Instead, it seams to print the variables contents with the field name next to it This isnt whats its the Main window!!!)
http://img244.imageshack.us/img244/6915/66052475zk2.jpg
Please help. I have debugged but dont know what to do and cant find anything wrong.
This is very urgent. Any help will be useful.
Thanks,
John

Ok, maybe I have confused others in regards to the issue as well.
We expect this label to be output from a Zebra Printer.
When output through Sapscripts printing test, the preview from the spool shows the ZPL2 code in small font (non readible if a created a screenshot) and if sent to the Zebra Printer, it prints the label correctly.
When output through MB02, the preview from the spool shows the code that I have attached to the 1st post in this thread. If I try to output to the Zebra Printer, nothing happens because the ZPL2 instructions are not even in the preview and therefore, the Zebra printer recieves no instructions. I should not have mentioned the laser printer, because it has nothing to do with this issue.
I hope that this makes the issue a little more clear and understandable. Please help.
Here is the ZPL2 coding before uploading to standard text (only difference is that once uploaded, the '/' characters are removed.) However, I believe that the problem may lie in the print program and how it compiles but I debugged and haven't really seen where it comes from:
/:NEW-PAGE
/ ^XA
/ DFNEW-RE-1FS
/ ^PRC
/ LH0,0FS
/ ^LL1830
/ ^MD0
/ ^MNY
/ LH0,0FS
/ FO244,854A0N,55,46CI13FRFB154,1,0,LFN999^FS
/ FO819,698A0N,55,46CI13FRFN998FS
/ FO245,477A0N,55,46CI13FRFB755,1,0,RFN997^FS
/ FO389,926A0N,55,46CI13FRFB654,1,0,RFN996^FS
/ BY3,3.0FO42,1072B3N,N,152,N,YFRFN995FS
/ FO276,1258A0N,55,46CI13FRFN995FS
/ FO484,774A0N,55,46CI13FRFN994FS
/ FO817,774A0N,55,46CI13FRFN993FS
/ FO611,556A0N,55,46CI13FRFN992FS
/ FO245,556A0N,55,46CI13FRFN991FS
/ FO397,117A0N,55,46CI13FRFN990FS
/ FO245,405A0N,55,46CI13FRFB880,1,0,RFN989^FS
/ FO244,698A0N,55,46CI13FRFN988FS
/ FO629,998A0N,55,46CI13FRFN987FS
/ FO244,623A0N,52,42CI13FRFN986FS
/ FO397,261A0N,55,46CI13FRFB404,1,0,RFN985^FS
/ FO819,854A0N,55,46CI13FRFN984FS
/ FO725,554A0N,55,46CI13FRFN983FS
/ FO397,189A0N,55,42CI13FRFB695,1,0,RFN982^FS
/ FO397,333A0N,55,42CI13FRFN981FS
/ FO638,333A0N,55,42CI13FRFN980FS
/ FO391,21A0N,63,63CI13FRFB433,1,0,CFN979^FS
/ FO36,698A0N,55,46CI13FR
/ FDWBS:FS
/ FO37,405A0N,55,46CI13FR
/ FDMATL:FS
/ FO37,478A0N,62,44CI13FR
/ FDDESC:FS
/ FO554,698A0N,55,46CI13FR
/ FDSUPPLIER:FS
/ FO32,625A0N,55,46CI13FR
/ FDTEXT:FS
/ FO35,1258A0N,55,46CI13FR
/ FDBATCH NO:FS
/ FO770,775A0N,63,51CI13FR
/ FD/FS
/ FO32,854A0N,55,46CI13FR
/ FDESHM:FS
/ FO37,556A0N,55,46CI13FR
/ FDQTY:FS
/ FO32,998A0N,55,46CI13FR
/ FDSAP MATERIAL DOC NO:FS
/ FO525,333A0N,55,46CI13FR
/ FDofFS
/ FO556,854A0N,55,46CI13FR
/ FDINSPECT:FS
/ FO32,926A0N,55,46CI13FR
/ FDUNLOADING:FS
/ FO37,117A0N,55,46CI13FR
/ FDSTOCK TYPE:FS
/ FO32,774A0N,55,46CI13FR
/ FDPURCHASE ORDER:FS
/ FO37,188A0N,55,46CI13FR
/ FDDELIVER TO:FS
/ FO37,260A0N,55,46CI13FR
/ FDSTORAGE LOC:FS
/ FO37,332A0N,55,46CI13FR
/ FDCONTAINERS:FS
/ FO1,1359GB1217,0,6^FS
/ FO594,1359GB0,474,6^FS
/ ^XZ
/:NEW-PAGE
/ ^XA
/ ^XFNEW-RE-1.ZPL
/ FN999FD&ATWRT_HAZAMAT(6)&^FS
/ FN998FD&EKKO-LIFNR&^FS
/ FN997FD&MABDR-MAKTX&^FS
/ FN996FD&MSEG-ABLAD&^FS
/ FN995FD&MSEG-CHARG&^FS
/ FN994FD&MSEG-EBELN&^FS
/ FN993FD&MSEG-EBELP&^FS
/ FN992FD&MSEG-ERFME&^FS
/ FN991FD&MSEG-ERFMG&^FS
/ FN990FD&MSEG-INSMK(1)&^FS
/ FN989FD&MSEG-MATNR&^FS
/ FN988FD&MSEG-MAT_PSPNR&^FS
/ FN987FD&MSEG-MBLNR&^FS
/ FN986FD&MSEG-SGTXT(40)&^FS
/ FN985FD&MSEG-UMLGO&^FS
/ FN984FD&QALS-PRUEFLOS&^FS
/ FN983FD&V_BACKORDER&^FS
/ FN982FD&V_NAME3&^FS
/ FN981FD&WS_CNTR&^FS
/ FN980FD&WS_CON&^FS
/ FN979FD&WS_HEADER& &^FS
/ ^PQ1,0,1,N
/ ^XZ
/ ^FX End of job

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

- Sapscript output convert to XML -

Hi Gurus,
I need to convert sapscript output with values - not template - to an XML File or txt.
i tried RSTXSCRP program and FB_CONVERT_FORM_TO_XML function module but doesn't help me.
Please help me with the solution.
Regards
Emre.
Edited by: emre karakurum on May 21, 2010 11:38 AM

In my opinion, SAPScript form is something quite unstructured - the layout of it can be very complicated and as well containing graphic and so on. XML is, on the other side, something pretty structured. I don't think that you can find something standard for simple conversion SAPScript to XML. SAPScript is simply not like IDOC - it's human readable layout rather than strucutre of data. You will have to write your own print-program which will create your own XML file instead of printing SAPScript form. The logic how to structure the XML file (which tags will be there and which values) will be coded in this print-program.

Download Sapscript output to PDF format

Hi,
how to download sapscript output to PDF format

Hi,
Please check below link.
http://www.scribd.com/doc/454814/SAPSCRIPT-to-PDF
Regards,
Anil

Preview the output getting the following error

dear all
i install the xml desktop 5.6 patch.when i load the data in rtf and i am trying to preview the output,i am getting the following error.please help me regarding this...................
Font Dir: C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\fonts
Run XDO Start
RTFProcessor setLocale: en-us
FOProcessor setData: C:\Users\Vamshi\Desktop\MODULE2.xml
FOProcessor setLocale: en-us
Run XDO end
C:\Users\xxx\Desktop>START C:\PROGRA~1\Oracle\XMLPUB~1\TEMPLA~1\tmp\127892~1.PDF
regards
sree

Hello,
You can download these components from Service Market Place (service.sap.com/swdc) and:
Download -> Support Packages and Patches -> Entry by Application Group -> "Support Packages and Patches" -> "SAP NetWeaver" -> "SAP NETWEAVER" -> "SAP NETWEAVER 2004S" -> "Entry by Component" -> "BI Java":
BI BASE SERVICES 7.00
BI WEB APPLICATIONS 7.00
You have to download the SP that equals your APAP SP.
Normally, these SCAs will be installed with installation of "BI Usage Type" of the J2EE engine.
Regards, Karol Kalisz
SAP BI Development

Generating same SApScript output to different output methods

Hi All,
Can someone tell me whether it's possible to generate different out methods using the same SAPScript output. if so how to do it ??
i.e : e-mail & printer or fax & printer.
thanks in advance
Dhanushka.

Hi,
Is there a BAPI to send the spool request as an e-mail or fax.
About the sequence of events:
Generating of the spool request is done using the open_form right. Once the form is closed get the spool id and send it by e-mail or fax ???.
is this correct
thanks & regards
Dhanushka.

Re: Dowloading SAPScript Output into excel

Hello Experts,
Could anyone let me know how to download the SAPScript output to Excel?
Rgds,
Pavan

Hi,
Please folow the link it will ful you
Download Smartform or Sapscript layout into Excel
Regards,
Bhupal.

I have just bought iphone 5 and i have a problem in charging it , firstly it took a long time to charge when i opened it to the first time , and its nearly dont charge on 110 output, and its taking a long time to charge on 220 reaches 50% in 1 hour

I have just bought iphone 5 and i have a problem in charging it , firstly it took a long time to charge when i opened it to the first time , and its nearly dont charge on 110 output, and its taking a long time to charge on 220 reaches 50% in 1 hour is this normal?

The charger block is universal and is able to handle multiple votages. One hour to reach 50% seems fine to me if the phone was completely flat to start with. Just leave it on charge for as long as it takes to reach 100%. I leave mine connected overnight all the time and it does not harm the battery

Spool read data (sapscript output value)

Hi Gurus,
I need to read spool data. I tried following program ;
DATA : mem_tab LIKE abaplist OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF itab OCCURS 0,
data(2000),
END OF itab.
SUBMIT rspolst2 EXPORTING LIST TO MEMORY AND RETURN
WITH rqident = '158593'
WITH first = '1'.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = mem_tab."( TABLE LIKE TABLE OF abaplist ).
break xkbahar.
IF NOT mem_tab[] IS INITIAL.
CALL FUNCTION 'LIST_TO_ASCI'
    EXPORTING
      list_index = -1
    TABLES
      listasci   = itab
      listobject = mem_tab." (LIKE TABLE OF abaplist)
ENDIF.
and   [converting spool contents into internal table;
but doesn't help me. Because i want to read sapscript output value in spool.
anybody have idea ? how do i read my sapscript output data in spool? Any function any program?
Please help me with the solution.
Regards
Emre.

Hi,
By selecting print icon of your form output ur able to generate spool of the document.
Ex: va03->provide orden no ->frm menu -> Sales Document -> issue output to-> select output type-> click on print icon(ctrl+p).
Spool of the form will be creatted for u, Check the same in SPO1 transaction.
For further details you can debug the same after selecting print icon.
If you need further details, Provide me the exact business requirement.
Regards,
Bysani.

TS2512 i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

i m trying to convert dpx files to mov in colour 1.5.3 but in file browser files are not seen in proper order for ex files names are 12345 it is coming as 23145 bcoz of which in output also its coming in wrong order

1) What you downloaded should be a packed file (zip, tar.gz, etc) that needs to be unpacked into the directory of your choice.
2) & 3) are answered by Ant's installation documentation (the page you're quoting from):
http://ant.apache.org/manual/index.html

Issue in viewing 'Print Preview' of SAPScript output in different languages

Hi All,
I have developed a SAP Script.
It is working correctly in English in all aspects.
I have created few standard texts for headers in SO10 and maintained in different languages.
In Print program also while retrieving these text i have used Order's language.
In debug mode also it is showing texts in different language (Chinese, Japanese, Thai etc...).
But in print preview it is showing as # every where we suppose to print headers from standard texts.
How can i view these texts in their original language (Order)!
Can anybody provide the solution for the same!
Thanks in advance.
Thanks,
Deep.

Hi,
I have selected 'Supplemental language support' boxes.
But still it is not working.
Can anybody solve above posted issue!
In PO it is showing in Japanese/Chinese etc.. characters.
In SO10 it is showing texts in respective languiages.
In debug mode of Print program & Layout set text is shown in respective language of text based on country of PO.
But in print preview it is showing as # everywhere there must text in different language.
Only in English i am able to view print preview correctly.
Can anybody provide inputs for resolving this issue!
Thanks in advance.
Thanks,
Deep.

SAPScript output

Hi,
This is my example.
In Sapscript the name of the form is Z_TESTSCRIPT.
Text elements for following windows:
HEADER
Element HEADER
/: POSITION XORIGIN 2 CM YORIGIN '-0.5 CM'
/: BOX XPOS 1 CM YPOS 1 CM WIDTH 18 CM HEIGHT 1 CM FRAME 10 TW INTENSITY 10
P2 ,,TEST PURCHASE ORDER</>
MAIN
Element MAIN
P1 Customer/Supplier:</>,,&KNA1-NAME1&
P1 PO No:</>,,&EKPO-EBELN&
P1 Part No:</>,,&MAKT-MATNR&
P1 Description:</>,,&MAKT-MAKTX&
P1 Quantity:,,</>&EKPO-MENGE&
P1 Sign:</>&uline(81)&
P1 Date:</>&EKKO-AEDAT&
FOOTER
Element FOOTER
/: POSITION XORIGIN 2 CM YORIGIN '-0.5 CM'
/: BOX XPOS 1 CM YPOS 1 CM WIDTH 18 CM HEIGHT 1 CM FRAME 10 TW INTENSITY 10
P2 ,,PLEASE SIGN THE PO BEFORE DISPATCH</>
And the ABAP Program name is ZPSAPSCRIPT.
And the code is like this.
REPORT ZPSAPSCRIPT.
TABLES : EKKO,
EKPO,
KNA1,
USR01,
MARA,
MAKT.
DATA : BEGIN OF ZOPTION.
INCLUDE STRUCTURE ITCPO.
DATA : END OF ZOPTION.
PARAMETERS: P_EBELN LIKE EKKO-EBELN,
P_EBELP LIKE EKPO-EBELP.
CLEAR EKPO.
SELECT SINGLE * FROM EKPO
WHERE EBELN = P_EBELN AND
EBELP = P_EBELP.
CLEAR KNA1.
SELECT SINGLE NAME1 FROM KNA1
INTO KNA1-NAME1
WHERE KUNNR = EKPO-KUNNR.
CLEAR MAKT.
SELECT SINGLE MAKTX FROM MAKT
INTO MAKT-MAKTX
WHERE MATNR = EKPO-MATNR AND
SPRAS = SY-LANGU.
CLEAR USR01.
SELECT SINGLE * FROM USR01 WHERE BNAME = SY-UNAME.
ZOPTION-TDDEST = USR01-SPLD. "Output device (printer)
ZOPTION-TDIMMED = 'X'. "Print immediately
ZOPTION-TDDELETE = 'X'. "Delete after printing
ZOPTION-TDPROGRAM = 'ZPQRPRNT'. "Program Name
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX = ' '
ARCHIVE_PARAMS = ' '
DEVICE = 'PRINTER'
DIALOG = ' '
FORM = 'Z_TESTSCRIPT'
LANGUAGE = SY-LANGU
OPTIONS = ZOPTION
IMPORTING
LANGUAGE = SY-LANGU
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'HEADER'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'HEADER'
EXCEPTIONS
ELEMENT = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'MAIN'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
ELEMENT = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'FOOTER'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'FOOTER'
EXCEPTIONS
ELEMENT = 1.
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
UNOPENED = 1
OTHERS = 2.
But the output, if i click on print preview button then the output is like below, but i could not see the purchase order which i have selected in the selection screen.
Element HEADER
/: POSITION XORIGIN 2 CM YORIGIN '-0.5 CM'
/: BOX XPOS 1 CM YPOS 1 CM WIDTH 18 CM HEIGHT 1 CM FRAME 10 TW INTENSITY 10
P2 ,,TEST PURCHASE ORDER</>
Element MAIN
P1 Customer/Supplier:</>,,&KNA1-NAME1&
P1 PO No:</>,,&EKPO-EBELN&
P1 Part No:</>,,&MAKT-MATNR&
P1 Description:</>,,&MAKT-MAKTX&
P1 Quantity:,,</>&EKPO-MENGE&
P1 Sign:</>&uline(81)&
P1 Date:</>&EKKO-AEDAT&
Element FOOTER
/: POSITION XORIGIN 2 CM YORIGIN '-0.5 CM'
/: BOX XPOS 1 CM YPOS 1 CM WIDTH 18 CM HEIGHT 1 CM FRAME 10 TW INTENSITY 10
P2 ,,PLEASE SIGN THE PO BEFORE DISPATCH</>
Same as the coding done for the text element for the main, header and Footer.
Message was edited by: sriram Ponna
Message was edited by: sriram Ponna
Message was edited by: sriram Ponna

Hi,
These is how i define the paragraphs.
Paragraphs Attributes
P1 Default Paragraph
 Standard attributes
 Line spacing 1.00 LN
 Left margin 1.00 CM
 Alignment Left-aligned
 Font attributes
 Font family TIMES
 Font size 12.0 Point
P2 Header Paragraph
 Standard attributes
 Line spacing 1.00 LN
 Left margin 4.50 CM
 Alignment Left-aligned
 Font attributes
 Font family TIMES
 Font size 18.0 Point
 Bold Yes
P3 Undelined paragraph
 Standard attributes
 Line spacing 1.00 LN
 Alignment Left-aligned
 Font attributes
 Font family TIMES
 Font size 12.0 Point
 Underlined Yes
Thanks,
Sriram.

PO sapscript output language

Hi,
how to change the output language for sapscript, in transaction ME23N ( purchase order ), using print preview or sending output to spool, please ? The sapscript code differs from language to language, but by default the English version is taken ?
thanks,
kind regards,
Rolf

Hi,
You can change the Message output language and can get the particular printout.
If not you can give print out in debug mode and change the ekko-spars parameter value your required language in call function OPEN_FORM .
Language value should be 1 char in this.
Ex: EN -> E, DE-> D.
Pls try .
Thanks.
Rajesh

Mismatch between preview and output

Hi..
I'm new to After Effects, and having some problems with a project I'm working on..
It's a fairly simple project, just some tracking and replacing elements in a video clip.
Everything looks fine in the RAM preview, things line up and the timing looks good.
However, I run into problems when I want to render the final result.
Everything seems to be off, with regards to the timing. It looks like all my keyframes
are off by a few frames, leading to misalignment.
As I said, I'm new to After Effects (this is my first attempt at editing any kind of video),
and I suspect I screwed up right at the begining of my project.
The original footage is 23,970 fps, but I changed the composition framerate to 23,976 fps.
Can't remember why exactly, I suspect it had something to do with tracking in Mocha..
Could this be the reason my output is off?
Any tips on how to correct this, without trying to figure out how many frames each pre-comp
is off, and manually correcting them? I have about 20 elements which would need editing..
Any help is much appreciated!

If you cahnged the comp framerate, anturalyl you would also have to forcibly override the source footage framerate in the footage interpretation. Other than that you could be seing issues with interlaced footage where in the "inbetween" areas, that is the alternate field, your motion is interpolated linearly from the preceding even field to the next one on a whole frame basis, making it look misaligned because it is in teh wrong position, naturalyl. Check that, too. If all fails, force conform your footage to a "clean" framerate e.g. by time-stretching it and rendering a suitable clip for mocha. You can always go back to the original then or time-stretch back later or scale the keyframes temporally. Many ways to skin the cat....
Mylenium

Preview Sapscripts outputs in ITS

Similar Messages

Maybe you are looking for