Price update on the Invoice Level
Hello gurus,
If I want to update my pricing on the Invoice level, what are the steps that I need to follow to carry out the configuration? As of now, we have the pricing setup only for sales orders and the same prices are copied on to the Invoice, I need to change it so that the pricing can be updated directly on the Invoice, is this possible? If yes, please provide the steps.
Thanks!
Raj
If the price changes maintain a new condition record for PR00 condition type in VK11.
and come to billing double click on the item level go to the condition tab and click the tab update beneath
and in that select carry out new pricing
if this doest nt work see the copy control from sales order to billing in *VTFA transaction code..*
select the relevant billing type and corresponding sales order type go to the left side top there will be item
press on that and take the relevant item category double click on that and there will be a field called pricing type change it to 'B'
it will carry out new pricing
Similar Messages
-
Error during PO Change-"Enter the price or set the 'Invoice Expected' indic
Hi Gurus,
I am facing this issue in the PO change. Whenever I try to change a PO and check ; system says" No error" but when I order it then I get this error "Enter the price or set the 'Invoice Expected' indicator " with a pop up "Complete Purchase order xxxx first or 'hold' the changes
This happens for all the POs with any vendor.
Regards
KapilHi Kapil,
We have got similar issue before while changing the P.O in change mode.
This generally happens when the P.O is changed after the follow on documents has been created.
In this case you can delete the change version and then amend the P.O without any issue.
Generally the 'Delete' button gets disabled once the follow on documents get created but in this case the 'Delete' button would be active and clicking on 'Delete' button would delete only Chnage version and the P.O would be back to original ordered status.
Please do the changes and let me know in case of any further clarifications.
Regards,
Teja -
Content location mass update at the site level
Hi,
I am looking for a way to mass update the content location at the site level. Right now, we can do the mass update at the folder level. We have about 80 folders or so. Is there a way we can mass update the starting url at the site level?
Environment: Oracle iLearning 5.2.1
Thanks
SudIf you are mass updating the content location, you need to inspect the following three tables in the ILEARN schema.
Table Columns Description
content_server host, physical_directory Content Server Definition
rco starting_url Self Explanatory
host_adapter adapter_path CMI Adapter
You might not have to change all of them, if you are only changing the path and not the host.
Scott
http://www.seertechsolutions.com -
Mass Update for the invoice reference (BSEG-REBZG)
Dear All ,
I need mass update for the invoice reference (BSEG-REBZG) . Is there any way to update it ?
Best Regards
DashHI,
Contact your ABAPer to Write BDC to update the Invoice reference. -
Table for price produced in the invoice-SD module
hi friends is there any table(not structure) from which i can find the value for
total Basic price(without any tax of frieght etc)
of an item in the invoice.like if the per unit value is 100/- nd qty is 10/- then total =1000/-
i want this basic total. in where clause i can use vbeln and posnr , i mean i have biiling document no and the item no
like in vbrp i am having the total net value for the billing document no and item no. but i want the total basic value for that item .
Edited by: achalmehra on Jan 20, 2010 11:29 AMFirst go to table T685 anf findout the condition type(like ZPBP = base price) for basic price. then take VBELN goto table VBRK get the value for field KNUMV based on this value goto KONV table get the base price( field KAWRT or KBETR) using the basic price condition type.....
-
Third Party Sales Incorrect Status Update at the order level
Hi,
We follow a third party sales in our system
Sales order > PR> PO> MIGO>MIRO>VF03
Howeevr, the status of the sales order is being processed.
The quantity is same, item relevance for delivery is unchecked at schedule line and item category.
Our users want the invoice to be genereated after the MIGO, so at the item category level bliing relevance is G, and at VTFA billing quantity is E.
It is working if the biling relevance is maintained as f, the status shows completed but i want this for G
Over all status is being in processed and order related billing at item level is partially invoiced.
Please help
Many thanks,
Shashidhar ReddyHi Santosh,
Thanks for clearing it out.
I did not understand what do you mean when u say"MIRO" process, write now our business requires the customer invoice to be created after the MIGO is done for PO, for which we have put billing relevance as G.
The problem now is, since the relevance is G which is order related billingof deliveyr quantity, even though the invice is completd and the accoounting document is cleared the ordder status still shows "being processed"
You have already mentioned it very clearly that this can be changed it using the user exit, but i just wanted to confirm that again.
Sincere thanks for taking time out for this.
Thank You
Shashidhar Reddy -
How to identify the Adjustment at the Invoice Level & Invoice line level
Hi All,
We could notice that while applying the AR adjustments to the one invoice line ( line level), the Credit Memo is getting created with the one invoice line corresponding to the original invoice line.
When we are applying the adjustments on the Invoice header level, then the adjusted amount is geting prorated for all the Invoice lines. That is, if the Orignal Invoice is having 10 lines. Then the Credit Memo getting created is also having the same number of lines, with the amount getting prorated equally.
We need a way to identity(differentiate) the Credit Memos which are created by adjustment at the invoice line and Invoice line level
Any help is highly appreciated.Hello,
Have you tried to refer the ADJUSTMENT_TYPE column in AR_ADJUSTMENS_ALL, i think holds the level at which adjustment was done -
Price Condition at the Header Level
Dear SAPfans,
Can we set the pricing procedure at the header level of sales order,
i would like to configure the rounding mechanism work on the header condition on the sales order, can it be done thru pricing procedure ?Hi,
You can make condition type either header or item level.
header level coniditon type doesnt have access sequence and you generally enter the value manually.
You can use this condition type in Pricing procedure.
Check all about Condition type in V/06
Hope this will help.
Reward Point if helpful.
Thanks,
Raja -
Global Part Updates at the Board Level
Hello,
How would I globally update a part on my board, that I've changed in the part lib? I'm using Ultiboard 11.0.2.
THX,
Steve HHi,
In Ultiboard, go to Tools -> Update Shapes. This will update all the shapes in the design.
Hope this helps.
Regards,
Tayyab R,
National Instruments. -
Cost center field not getting updated to the second level dso
Hi Experts,
Data is going from one DSO to other high level DSO where in the source DSO there is cost center filled for a Purchase order but it is not in the target DSO. Target DSO fetches data from 5 DSO's and this is one of them.
Please suggest.
Thanks
SudhaHi Sudha,
As you say that the load from source DSO to Target DSO is the final load, so question of overwrite does not come into picture.The only point which I feel is that the data might be getting resticted somewhere...
Is there any routine in the transformation for that field available which will be restricting the load from the source DSO to the target DSO. Is there any start routine available..Please check all these things...
Hope it Helps,
Thanks,
Amit Kr. -
Price caliculation in the Invoice
How can we caliculate the price for a particular material in Invoice
what do u want to do ?
Regards
Peram -
Item Price in A/R Invoice PLD
Hi,
For my customer, unit price in the item master data is the MRPrice.In the A/R Invoice print out I want this price should be shown.(without special price update in the invoice).Which table and field I should take as the database table in the PLD.
Thanks and Regards,
S.G.SekarHi,
OPLN is the price list master.
This master is related to ITM1 in which each item with the corresponding price in the price list is recorded.
For example if you have 10 price lists and 100 items in the master.
And all the 100 items are assigned prices in all the price lists, then ITM1 will contain all that data i.i (100 * 10)
Run the following queries in the query generator
Select * from opln
select * frfom oitm
select * from itm1
select i0.itemcode , i0.itemname , p0.listname , i1.price
from oitm i0 inner join itm1 i1 on i0.itemcode = i1.itemcode
inner join opln p0 on i1.pricelist = p0.listnum
order by i0.itemocde
Hope this will give you a clear picture.
thanks
Malhaar -
How to update the condition price in sales order while creating the invoice
Hi,
How to update the condition price in the sales order to carry out the new price while creating the invoice?
While creating the invoice it should update the condition price in sales order.
Thanks,
BalaramNo, pricing is not there in delivery.
I found an exit for VF01transaction where we can update the price in order.
Can you please tell me how to update the price if I have the order, material numbers and conditions number?
Thanks,
Balaram -
Payment budget is getting updated at the time of Invoice
Hi,
I have a peculiar problem in Funds Management. As per the client requirement payment has to made in split i.e. 90% and 10% against the invoice amount raised. But, payment budget is getting updated at the time of invoice itself when i use the profile of 00350.
It is observed that at the time of payment, the payment budget is not getting updated and updating at the time of invoice creation itself. So, when we developed customised report, we had given payment budget filed to know the current month expenditure. But the problem is as per cleint requiremnt, the payment budget has to update at the time of payment but not at the time of invoice creation.
Please advice me is there any way to solve this problem.
Thanks & Regards
VijaybhaskarThis is standard; payment budget is updated during the invoice issue. What is done with the payments is 'payment transfer'; it could be either manual (via FMF0) or automatic - depending on your settings in FM. In your reprots you can define to see only 'cleared' invoices in FM, i.e. those, for which the payment transfer has been completed. However, the availability control will be still performed already on invoice phase.
Hi,
As suggested by you i have done automatci payment ransfer in OF29 and made value type 54 as stastical and 57 value type for payments.
As you suggested "In your reprots you can define to see only 'cleared' invoices in FM, i.e. those, for which the payment transfer has been completed.".
Please expalin where can i look clered invoices in FM, .e. those, for which the payment transfer has been completed."
Regards,
vijay -
Please clear the price/ set the invoice expected indicator
Hi SRM Gurus,
We have upgraded from SRM 3.0 to SRM 7.0 thro' Double step upgrade.
We are in SRM 7.0 SP06
Scenario :Extended Classic Scenario
After the Upgrade we have created a shopping cart from SRM-MDM catalog.
Shopping cart is approved.Local Purchase order is not ordered but it is
saved. When we Edit the Purchase order and press the Check button
defect noticed" Plese clear the price (or) set the invoice expected
indicator.
This happens only after the Upgrade.
even for the old purchase order when we do changes we are getting the above defect
can you please advice us.
whether any SAP notes to be applied. I have checked in SAP market place,there is no SAP NOTES
Regards
G.Ganesh KumarHi,
I have checked the Purchase order for the newly created one in SRM 7.0
If we go to the supplier list we can check for the invoice expected indicatoe where we can check this.
It is working, I resolved on my own.
For all the OLD purchase order created before upgrade if i change and check even though the invocie indicator is checked
i get the above message."Please clear the price/ set the invoice expected indicator"
any one working on SRM 7.0 can please check and reply
Regards
G.Ganesh Kumar
Maybe you are looking for
-
Import Pricing procedure error
My requirement is like this....... .Material Value Plus Customs Duty, CHA Charges, Transport Charges and Commission(For Broker) My Material value will be in USD...all the customs Duty CHA charges, Transport charges and commission will be in inr... Bu
-
I've been using this machine for a few months with no problems but now the bottom paper tray is nearly impossible to open. I have to push it in and out, wiggle it, shake it, etc, numerous times before it pops open. I've examined the tray and the prin
-
I have just tried to update the software on my iPad and it is now asking me to connect to iTunes. The last time I did this it did not tell me to do this. I'm currently travelling and do not have my MacBook with my iTunes.Can it be resolved without iT
-
How to Enable Headphone/Mic and External Speakers at On
Hey!?Just bought the Sound Blaster X-Fi XtremeGamer Fatalty Professional card to put in a new system I'm building. I wanted to use this instead of the one that had the 5.25" dri've bay connection because my PC's front panel closes over those bays and
-
Hello all, I have a subVI that deletes 5 files which should always be present on my desktop due to a run before. However, I have to put in a fail-safe that skips the delete process if the files are for some reason missing. Attached is the simple fil