Pricing condition copy
Gurus..
Here is my requirement..
I have 3 conditions in my pricing procedure.
1st one in step 100, lets call it Z001.
The 2nd one somewhere down the line in step 250, lets call it z015.
The last one somewhere down the line in step 300, lets call it z020.
pricing comes to step 100 and Z001 is calculated.
Now when I am in step 250, under certain conditions Z015 shud carry the same value as Z001. For this I have to copy the Z001 value to Z015.
Now when I am in step 300, again upon certain conditions Z020 shud carry the same value as Z001. For this I have to copy the Z001 value to Z020.
I just want to write one routine. Depending on the step, it shud push the value to z015 or z020.
Please let me know how I can achieve this?
FYI - My limitations are I cannot use the subtotal fields, make one condition reference the other, use the FROM field etc. <b>My only go is code something in Alt. Cal. type.</b>
I am confused over the usage of these komv, konv and other tables. what field to look for and stuff like that? basically a newbie to this stuff and confused. Please let me know.
Thanks a lot.
Hi Runa,
Why you are so keen in going with some coding?
If the condition types Z015 and Z020 in percentage you can mention in the condition record as 100% and proceed.
Hope it will be useful
Regards,
Elanchezhian. K.C.
Similar Messages
-
Third Party Order pricing conditions copy to PO
Hello,
I have few pricing conditions in the 3rd party sales order. I want those conditions to be reflected in the 3rd party PO.
Is there anyway to copy third party sales order pricing condition types to the PO?
Cheers
Anand.Dear Anand,
Try with,
T. Code: ME11 - Create Info Records
Maintain the same condition in the info-record. The price shall be picked up in the PO by the inforecord.
Best Regards,
Amit -
Good ol' pricing condition copying
dear all, i am using the CRMXIF_ORDER_SAVE, i am trying to create an order, and populate pricing conditions etc. only i want to copy the entries from an existing order, similar to using the follow-on transaction. only ... i am not using document flow.
i have the item source guid, of the original order with the conditions all set up.
this is it in short, and can elaborate where necessary.
i guess i am looking for some magical FM or Class, or BAdI.
cheers in anticipationHi Arun,
We are trying to use the same badi but don't know how to update conditions while copying? can you give an example like which tables to read and which one to update and how...? It will be helpful.
Regards,
Puneet Makkar -
Price and Pricing conditions are not copied to PO for a line item !!
Hi
I have created a PO w.r.t a PR which has only one line item.
Now, I add another line item to this existing PO, i get an error message that the Price and Pricing conditions are not copied.
How do i rectify this error !!
Where might be the link for this Price and Pricing conditions to get copied in to this PO ??
MaruthiRamWhat kind of PR and in the PO same material you enter for new line or new material and do you have any funcitonal authorization assigned o your user id
please reply -
Copy pricing conditions from R/3 to CRM
Hello,
I am using Function Module CRM_ORDER_MAINTAIN to copy pricing conditions from R/3 sales order to CRM complaint document.
I am fetching R/3 conditions with the help of RFC call to R/3 and then passing these condition records to the FM CRM_ORDER_MAINTAIN.
I am populating the importing parameter - IT_PRIDOC of this FM. And filling following internal table of this importing parameter:PRIC_COND, COND_ADD, COND_CHANGE and COND_DELETE.
I am not sure if filling table PRIC_COND would be needed.
Could you please guide me about the exact use of these tables? Do you have any documentation for this function module?
Many thanks in advance,
Sandhya.Dear Sandhya,
I am facing the same problem.
Could you please explain me (in case you finally implemented this), how you did it?
Thanks in advance.
Regards,
Yolanda -
User exit to copy Manual pricing conditions with in sales documents
Hi all,
I have a situation where i have to copy the manual pricing conditions from inquiry to quotation.
Problem: From VA21 when I try to do the same using the tab "create with reference" the document is being copied but the manually set pricing condition in the inquiry is not being copied into quotation. This is because in the copy controls the pricing type is set to 'B' which means "carry out new pricing". I can change it to 'C' or 'D' so that it copies manual pricing but i am not allowed to do so because other sales orgs in the company has a problem if i do so. Only our perticular sales org needs this config. I cannot even create another item catogory specific to this plant because it is against the rules of the company. So I am looking for a user exit in which i can change this pricing type during runtime so that i can plug in some code specific to this sales org to copy manual pricing. I have found one from the SAP note 24832 (MV61AFZA). It doesn't work as i think its obsolte. Can anyone suggest me a better way of solving this issue. Any quick response is appreciated.
Thanks,
Giridhar.Hi
The following EXITS may help you
Exit Name Description
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
V45A0001 Determine alternative materials for product selection
Regards
PRabhu -
How to copy the Pricing conditions from one Distribution Channel to another
Generally we use VK11 transaction to create conditional records .
but I Need to Know whether is it Possible to copy the Pricing conditions from one Distribution Channel to another with same name and same internal Characteristics .
Since we have around 70+ of Condition type with different parameter Sequence.So Instead of Going for BDC whether is there any standard Funct Modules/programs/BAPIs to do this?
How to make a copy Condition types from One Distribution Channel to another.
since SAP has already provided to copy conditions from Customer to customer.
Likewise i need to know whether SAP is facilitating for these feature also.
Iam Dubious in this issue.
Hope Fully looking for the answers.
Harish.N- IDOC_INPUT_COND_A (you can create IDOC, but also call directly)
- call transaction / batch input (use transaction XK15, as used by LSMW)
- use group of function modules RV_CONDITION_COPY, RV_CONDITION_SAVE, RV_CONDITION_RESET + commit.
if you search SDN on 'RV_CONDITION_COPY' you'll find more info I believe.
Someone mentioned BAPI_PRICE_CONDITIONS as well. -
Problem in Copying Pricing Condition Type
Hi All,
This problem is regarding copying pricing condition type in Sales Order. The problem is given below with an example -
Qty of Material A - 10 PC.
Condi Type Amount Currency Per UOM Condition value Currency
ZP06 100 INR 1 PC 1000.00 INR
ZP07 2 INR 1 PC 20.00 INR
ZP08 98 INR 1 PC 980.00 INR Statistical
ZP01 98 INR 1 PC 980.00 INR Mandatory with ERL A/c Key Active
The condition types ZP06 & ZP07 have access sequence maintained for them and ZP08 has been derived deducting ZP07 from ZP06.
I want the above mentioned scenario where the values of Condition Type ZP08 which is a Statistical Condi Type will be copied exactly & entirely to condition type ZP01 where It will remain active alongwith posting key ERL.
I have tried copying it by 100 % copy but the value is getting changed as 100% instead of 98 INR.
Considering the above scenario please suggest some soluitons.
Thanks & Regards
PriyankaHi Tarpan,
First of all thanks for checking my post.
In the problem I am not looking for the value of ZP08 to be maintained manually.I want the system to copy the exact details of ZP08 to ZP01 entirely where the condition type ZP01 will remain active alongwith the posting key ERL.
I have tried copying the condition type ZP08 by using 100% copy of condition type but in ZP01 the resultant value becomes 100% in place of 98 INR.
Please suggest some solutions.
Thanks & Regards
Priyanka -
Copy Pricing Conditions from Sales Order to Billing
Hi,
Is there anyway to copy pricing conditions for item level from Sales Order to Billing Document at the time of creation of Billing Document.
ThanksThis question is not on topic for the Web Dynpro ABAP forum and has been locked.
-
Copy Pricing COnditions from Shipment Cost do to Purchase Order
Hi:
How can I copy all freight conditions on shipment cost document to the Purchase order created.
e.g. In shipment cost document a\I have following pricing conditions.
ZFRT - Freight - $250.00
ZFCL-Fuel Chrg - $25
ZCLN-Cleaning Chrg - $30
Total = $305 on shipment cost
When Purchase order is generated automatically.
I want same conditions on Purchase order instead of gross amt PB00 of $305.
How can we copy conditions from Shipment cost doc to the Purchase order??Hi,
First of all I don't think that it is possible in the standard system. SAP only transfers the total cost of shipment to MM as you already found out.
Actually, if I remember well, the cost condition is transfered to a service entry sheet assigned to the purchase order item for the service agent.
From SAP help
http://help.sap.com/saphelp_erp60_sp/helpdata/en/93/74413b546011d1a7020000e829fd11/frameset.htm
Purchase Order Determination
Transfer and creation of the relevant documents in FI
Transferring Shipment Costs to Accounting
Transferring of shipment costs in order to create accruals comprises two functions:
Procedure
1. In the shipment cost document, go to the detail screen of a shipment cost item, for which costing and account assignment has already been carried out and which you want to transfer to FI.
2. Select the Transfer indicator. ...
3. Save the shipment cost document.
When you save, the system creates a service entry sheet with reference to the purchase order determined, an accounting document for creation of accruals and further documents in FI.
IMHO it is good enough to transfer the total cost of shipment. It is the amount needed for accrual, and used afterwards for logistics invoice verification based on the automatically generated service entry sheet.
Why do you want more details in MM if you already have the detailed data in the Shipment cost document?
It is not the answer you want, but I hope it helps anyway.
Best Regards,
Franck Lumpe
Freelance SAP Consultant -
Copying STO PO pricing condition to Billing During Billing creation
Hi,
MM and SD pricing conditions are not similar.
And I cant use Copy PO Basic price in billing Document
I was advised to try USEREXIT_PRICING_PREPARE_TKOMP or USEREXIT_PRICING_PREPARE_TKOMK.
How do I copy the Pricing condition from the STO PO to Billing during billing creation?
Is there an FM i can use to extract the pricing condition given the STO PO?
thanks,
NCHi
If the option of Raghavendra doesn't work for you (parameters in copy rule for invoice), try with VOFM subroutines (Condition formula for alternative calculation type) in the pricing procedure. Surely it will be slower, but it must work. How? You have in KOMP the values for VGBEL and VGPOS with the delivery number and item. So, seach the PO number in the same way. When you have the PO number, with the value of field KNUMV search the value of condition in table KONV.
I hope this helps you
Regards
Eduardo
PD: I forgot. The userexits that you mention is to populate KOMP/KOMK for customer fields. See SAP Note 531835 - Using field PSTYV in the condition access for futher information.
Edited by: E_Hinojosa on May 16, 2011 9:21 AM -
Copy the pricing conditions from Sales Order to Delivery
Hi all,
I have to send the princing conditions from the delivery trough Idoc.
That's the reason why I need the princing conditions in the delivery. But I can't redetermine the pricing procedure in the delivery creation. I need to copy the pricing conditions from order to delivery.
Because if there is any manual modification of a condition in the sales order, If I redeterminate the pricing procedure in the delivery, I would lost the changes.
Anybody knows any User Exit or anyway to copy the pricing conditions from SO to Delivery?
Thanks in advanceI think pricing will not determine in delivery, if any shipmentchanges will copy to delivery, not standard pricing.
Logically, when you create delivery by that time your pricing need to finsh, no changes, so send pricing infor from order to customer, as its standard process in any client. -
Copying changed pricing conditions to other distribution channels
Dear Experts,
I have 3 distribution channels.My requirement is,if I change an pricing conditions(using VK12) in one distribution channel,it should be copied to other distribution channels also.
Can you please suggest an BAPI/FM to implement this?
Many thanks.
Rgds,
MuraliHi Dinesh,
Can you please elaborate this as I am new to this.
Many thanks.
R,
Murali -
Change Pricing Condition for an item with CRM_ORDER_MAINTAIN
Hi community,
I try to change an existing condition with the function module crm_order_maintain.
Everything looks fine, no error no dump, but no success
The condition stays the same!
Can anybody find a solution for this?
Heres my report so far:
*& Report ZTEST_PRICING2
REPORT ztest_pricing2.
DATA: lt_guid TYPE crmt_object_guid_tab,
lt_item TYPE crmt_object_guid_tab,
lt_saved TYPE crmt_return_objects,
lt_pridoc TYPE crmt_pric_cond_t,
ls_pridoc TYPE crmt_pric_cond,
lt_pricom TYPE crmt_pridoc_comt,
ls_pricom TYPE crmt_pridoc_com,
lt_header TYPE crmt_orderadm_h_comt,
lt_input TYPE crmt_input_field_tab,
ls_input TYPE crmt_input_field,
ls_input_fn TYPE CRMT_INPUT_FIELD_NAMES,
ls_cond_chg TYPE prct_cond_external_change,
ls_cond TYPE PRCT_COND_DU,
lt_pricing_i TYPE CRMT_PRICING_I_WRKT.
PARAMETERS: lv_head TYPE crmt_object_guid DEFAULT 'C4C61C4E35DDF306E10000000A024089'.
PARAMETERS: lv_item TYPE crmt_object_guid DEFAULT '09C71C4E35DDF306E10000000A024089'.
PARAMETERS: lv_kbetr TYPE prct_cond_rate DEFAULT '100'.
INSERT lv_head INTO TABLE lt_guid.
INSERT lv_item INTO TABLE lt_item.
CALL FUNCTION 'CRM_ORDER_READ'
EXPORTING
it_header_guid = lt_guid
it_item_guid = lt_item
* IV_MODE =
* IV_ONLY_SPEC_ITEMS =
* IT_REQUESTED_OBJECTS =
* IV_NO_AUTH_CHECK =
* IT_ITEM_USAGE_RANGE =
* IV_SUBITEM_DEPTH = -1
* IT_OBJECT_FILTER =
* IV_ONLY_CHANGED_OBJ = FALSE
* IV_STATUS_H_CHECK_RELEVANCE = FALSE
IMPORTING
et_pridoc = lt_pridoc
et_pricing_i = lt_pricing_i
* CHANGING
* CV_LOG_HANDLE =
EXCEPTIONS
document_not_found = 1
error_occurred = 2
document_locked = 3
no_change_authority = 4
no_display_authority = 5
no_change_allowed = 6
OTHERS = 7.
IF sy-subrc <> 0 AND lt_pridoc IS NOT INITIAL.
WRITE: / 'ERROR'.
EXIT.
ENDIF.
READ TABLE lt_pridoc INDEX 1 INTO ls_pridoc.
IF sy-subrc <> 0.
WRITE: / 'ERROR'.
EXIT.
ENDIF.
READ TABLE ls_pridoc-pric_cond INTO ls_cond WITH KEY kschl = 'PB00'.
IF sy-subrc <> 0.
WRITE: / 'ERROR'.
EXIT.
ENDIF.
ls_input-ref_guid = lv_head.
ls_input-ref_kind = 'A'.
ls_input-objectname = 'PRIDOC'.
ls_input_fn-fieldname = 'WAERS'.
INSERT ls_input_fn INTO TABLE ls_input-field_names.
ls_input_fn-fieldname = 'KBETR'.
INSERT ls_input_fn INTO TABLE ls_input-field_names.
INSERT ls_input INTO TABLE lt_input.
ls_pricom-ref_guid = lv_head.
ls_pricom-ref_kind = 'A'.
*ls_pricom-PRICING_TYPE = 'B'.
*ls_pricom-pricing_procedure = 'ZZMTA'.
ls_pricom-pric_cond[] = ls_pridoc-pric_cond[].
MOVE-CORRESPONDING ls_cond TO ls_cond_chg.
ls_cond_chg-waers = 'EUR'.
ls_cond_chg-kbetr = lv_kbetr.
INSERT ls_cond_chg INTO TABLE ls_pricom-cond_change.
APPEND ls_pricom TO lt_pricom.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
it_pridoc = lt_pricom
CHANGING
* ct_orderadm_h = lt_header
ct_input_fields = lt_input
EXCEPTIONS
error_occurred = 1
document_locked = 2
no_change_allowed = 3
no_authority = 4
OTHERS = 5.
IF sy-subrc <> 0.
EXIT.
ENDIF.
CALL FUNCTION 'CRM_ORDER_SAVE'
EXPORTING
it_objects_to_save = lt_guid
IMPORTING
et_saved_objects = lt_saved
* ET_EXCEPTION =
* ET_OBJECTS_NOT_SAVED =
EXCEPTIONS
document_not_saved = 1
OTHERS = 2.
IF sy-subrc EQ 0.
COMMIT WORK AND WAIT.
ELSE.
ROLLBACK WORK.
ENDIF.
regards
MarkusHello Jordi,
The example below is whereby i was trying to copy all the pricing condition on one document to another and deleting what's not present on the source document.
You can used this piece of code to adapt your requirement.
CALL FUNCTION 'ZCRC_FM_COPY_PRICE_COND_ALL'
EXPORTING
id_object_guid_src = <fs_el_con_guid>
id_object_guid_dest = <fs_el_so_guid>
id_commit = abap_false
EXCEPTIONS
not_allowed = 1
error_occured = 2
OTHERS = 3.
PERFORM f_recup_donnees USING id_object_guid_src
id_object_guid_dest.
PERFORM f_modif_condition_prix USING id_object_guid_src
id_object_guid_dest.
PERFORM f_header_copy_pricing using id_object_guid_src
id_object_guid_dest.
FORM f_recup_donnees USING pd_object_guid_src TYPE crmt_object_guid
pd_object_guid_dest TYPE crmt_object_guid.
DATA:
lt_header_guid TYPE crmt_object_guid_tab.
INSERT pd_object_guid_src INTO TABLE lt_header_guid.
INSERT pd_object_guid_dest INTO TABLE lt_header_guid.
CLEAR: gt_orderadm_i, gt_doc_flow.
CALL FUNCTION 'CRM_ORDER_READ'
EXPORTING
it_header_guid = lt_header_guid
IMPORTING
et_doc_flow = gt_doc_flow
et_orderadm_i = gt_orderadm_i
EXCEPTIONS
document_not_found = 1
error_occurred = 2
document_locked = 3
no_change_authority = 4
no_display_authority = 5
no_change_allowed = 6
OTHERS = 7.
IF sy-subrc NE 0.
RAISE error_occured.
ENDIF.
" F_RECUP_DONNEES
FORM f_modif_condition_prix USING pd_guid_src TYPE crmt_object_guid
pd_guid_dest TYPE crmt_object_guid.
DATA : ld_pd_handle_src TYPE prct_handle,
ld_pd_handle_dest TYPE prct_handle,
lt_komv_print_src TYPE prct_cond_print_t,
lt_komv_print_dest TYPE prct_cond_print_t,
ls_komv_print_dest LIKE LINE OF lt_komv_print_dest,
ls_komv_print_src LIKE LINE OF lt_komv_print_src,
lt_cond_chg TYPE prct_cond_print_t,
lt_cond_chg_insert TYPE prct_cond_print_t,
ls_cond_chg TYPE prct_cond_print,
ls_cond_chg_tmp TYPE prct_cond_print,
ls_input_fields TYPE crmt_input_field,
lt_input_fields TYPE crmt_input_field_tab.
DATA : bal_log TYPE balloghndl,
lt_item_ret TYPE prct_item_ret_t,
lt_cond_ret TYPE prct_cond_print_t,
ld_data_changed TYPE xfeld,
gv_decimal TYPE usdefaults-dcpfm,
ld_lines TYPE i,
ld_ajout_cond TYPE abap_bool.
FIELD-SYMBOLS : <fs_orderadm_i_dest> TYPE crmt_orderadm_i_wrk,
<fs_orderadm_i_src> TYPE crmt_orderadm_i_wrk,
<fs_cond_chg> TYPE prct_cond_print,
<fs_cond_chg_insert> TYPE prct_cond_print.
* Début Ajout CD1K904313-001.
DATA: ld_guid_src TYPE crmt_object_guid.
FIELD-SYMBOLS: <fs_doc_flow> TYPE crmt_doc_flow_wrk.
* Début Ajout CD1K904313-001.
* Verrouillage des documents source et destinataire
PERFORM f_lock_document USING pd_guid_src.
PERFORM f_lock_document USING pd_guid_dest.
*Récupérer le pricing handle des documents
* Document source
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
EXPORTING
iv_header_guid = pd_guid_src
IMPORTING
ev_pd_handle = ld_pd_handle_src
EXCEPTIONS
error_occurred = 1
handle_determination_error = 2
orgdata_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
RETURN.
ENDIF.
* Document destinataire
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
EXPORTING
iv_header_guid = pd_guid_dest
IMPORTING
ev_pd_handle = ld_pd_handle_dest
EXCEPTIONS
error_occurred = 1
handle_determination_error = 2
orgdata_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
RETURN.
ENDIF.
* A ne pas traiter les postes de type ZPDF
DELETE gt_orderadm_i WHERE itm_type = 'ZPDF'.
LOOP AT gt_orderadm_i ASSIGNING <fs_orderadm_i_dest> WHERE header = pd_guid_dest.
REFRESH : lt_komv_print_src,
lt_komv_print_dest,
lt_cond_chg,
lt_cond_chg_insert.
* Début Modif CD1K904313-001.
* Récupérer le guid de l'item liée au item destinataire.
READ TABLE gt_doc_flow ASSIGNING <fs_doc_flow> WITH KEY objkey_b = <fs_orderadm_i_dest>-guid.
CHECK sy-subrc EQ 0.
ld_guid_src = <fs_doc_flow>-objkey_a.
* READ TABLE gt_orderadm_i ASSIGNING <fs_orderadm_i_src> WITH KEY header = pd_guid_src
* number_int = <fs_orderadm_i_dest>-number_int.
* Fin Modif CD1K904313-001.
* Récupérer les pricing document
IF sy-subrc EQ 0.
* Document source
CALL FUNCTION 'PRC_PD_ITEM_SHOW'
EXPORTING
iv_pd_handle = ld_pd_handle_src
* iv_item_no = <fs_orderadm_i_src>-guid "Supression CD1K904313-001
iv_item_no = ld_guid_src "Addition CD1K904313-001
IMPORTING
et_komv_print = lt_komv_print_src
EXCEPTIONS
non_existing_handle = 1
non_existing_item = 2
ipc_error = 3
OTHERS = 4.
ENDIF.
* Document destinataire
CALL FUNCTION 'PRC_PD_ITEM_SHOW'
EXPORTING
iv_pd_handle = ld_pd_handle_dest
iv_item_no = <fs_orderadm_i_dest>-guid
IMPORTING
et_komv_print = lt_komv_print_dest
EXCEPTIONS
non_existing_handle = 1
non_existing_item = 2
ipc_error = 3
OTHERS = 4.
* Modification et Suppression des conditions de prix
LOOP AT lt_komv_print_dest INTO ls_komv_print_dest .
CLEAR: ls_cond_chg,
ls_komv_print_src.
MOVE-CORRESPONDING ls_komv_print_dest TO ls_cond_chg.
* Rechercher la condition sur le document source
READ TABLE lt_komv_print_src INTO ls_komv_print_src WITH KEY kschl = ls_komv_print_dest-kschl
zaehk = ls_komv_print_dest-zaehk. "CD1K904313
IF sy-subrc EQ 0.
ls_cond_chg-kbetr_prt = ls_komv_print_src-kbetr_prt.
ls_cond_chg-kwert = ls_komv_print_src-kwert.
ls_cond_chg-kinak = ls_komv_print_src-kinak.
ELSEIF ls_cond_chg-kschl IS NOT INITIAL.
CLEAR ls_cond_chg.
CONTINUE.
ENDIF.
* Format décimal
CASE gv_decimal.
WHEN space. "format N.NNN,NN
REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
WHEN 'Y'. "format N NNN NNN,NN
REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
ENDCASE.
INSERT ls_cond_chg INTO TABLE lt_cond_chg.
CLEAR ls_cond_chg.
ENDLOOP.
* Ajout des conditions de prix
LOOP AT lt_komv_print_src INTO ls_komv_print_src WHERE kschl IS NOT INITIAL.
CLEAR: ls_cond_chg, ld_lines, ls_komv_print_dest, ls_cond_chg_tmp, ld_ajout_cond.
* Vérifier la présence de la condition sur le document destinataire
READ TABLE lt_komv_print_dest INTO ls_komv_print_dest WITH KEY kschl = ls_komv_print_src-kschl
zaehk = ls_komv_print_src-zaehk. "CD1K904313.
IF sy-subrc EQ 0.
CLEAR: ls_cond_chg, ls_komv_print_dest.
CONTINUE.
ELSE.
DESCRIBE TABLE lt_cond_chg LINES ld_lines.
READ TABLE lt_cond_chg INTO ls_cond_chg_tmp INDEX ld_lines.
IF sy-subrc EQ 0.
ld_ajout_cond = abap_true.
MOVE-CORRESPONDING ls_komv_print_src TO ls_cond_chg.
ls_cond_chg-knumv = ls_cond_chg_tmp-knumv.
ls_cond_chg-kposn = ls_cond_chg_tmp-kposn.
ls_cond_chg-stunr = ls_cond_chg_tmp-stunr + 10.
ELSE.
CLEAR: ls_cond_chg, ld_lines, ls_komv_print_dest, ls_cond_chg_tmp.
CONTINUE.
ENDIF.
ENDIF.
* Format décimal
CASE gv_decimal.
WHEN space. "format N.NNN,NN
REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
WHEN 'Y'. "format N NNN NNN,NN
REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
ENDCASE.
* Récupérer les nouvelles conditions qui seront ajouté au document destinataire
IF ld_ajout_cond EQ abap_true.
INSERT ls_cond_chg INTO TABLE lt_cond_chg_insert.
ENDIF.
INSERT ls_cond_chg INTO TABLE lt_cond_chg.
CLEAR ls_cond_chg.
ENDLOOP.
CALL FUNCTION 'PRC_INT_ITEM_INPUT'
EXPORTING
iv_pd_handle = ld_pd_handle_dest
iv_item_no = <fs_orderadm_i_dest>-guid
it_cond_prt = lt_cond_chg
iv_bal_log = bal_log
iv_req_ret = abap_true
iv_req_cond_prt = abap_true
IMPORTING
et_item_ret = lt_item_ret
et_cond_prt = lt_cond_ret
ev_data_changed = ld_data_changed
EXCEPTIONS
non_existing_handle = 1
non_existing_item = 2
ipc_error = 3.
IF sy-subrc = 0.
* En cas d'ajout de nouvelles conditions de prix, appeler le MF PRC_INT_ITEM_INPUT
* avec les montants
IF lt_cond_chg_insert IS NOT INITIAL.
REFRESH lt_cond_chg[].
lt_cond_chg[] = lt_cond_ret[].
LOOP AT lt_cond_chg_insert ASSIGNING <fs_cond_chg_insert>.
READ TABLE lt_cond_chg ASSIGNING <fs_cond_chg> WITH KEY kschl = <fs_cond_chg_insert>-kschl.
IF sy-subrc EQ 0.
<fs_cond_chg>-kwert = <fs_cond_chg_insert>-kwert.
<fs_cond_chg>-kbetr_prt = <fs_cond_chg_insert>-kbetr_prt.
ENDIF.
ENDLOOP.
REFRESH lt_cond_ret[].
CALL FUNCTION 'PRC_INT_ITEM_INPUT'
EXPORTING
iv_pd_handle = ld_pd_handle_dest
iv_item_no = <fs_orderadm_i_dest>-guid
it_cond_prt = lt_cond_chg
iv_bal_log = bal_log
iv_req_ret = abap_true
iv_req_cond_prt = abap_true
IMPORTING
et_item_ret = lt_item_ret
et_cond_prt = lt_cond_ret
ev_data_changed = ld_data_changed
EXCEPTIONS
non_existing_handle = 1
non_existing_item = 2
ipc_error = 3.
ENDIF.
* Publish event afin de sauvegarder les conditions de prix
CALL FUNCTION 'CRM_EVENT_PUBLISH_OW'
EXPORTING
iv_obj_name = 'PRIDOC'
iv_guid_hi = pd_guid_dest
iv_kind_hi = 'A'
iv_event = 'SAVE'
EXCEPTIONS
OTHERS = 1.
* As no order_maintain will follow implicitly and therefore no
* exec times for the events will be set, call CRM_ORDER_MAINTAIN
* without any parameters
* Then the exec time 'end of document' will be set and with the
* group logic also all exec times before
* But at least one object is needed in input_fields
* --> use PRIDOC
ls_input_fields-ref_guid = <fs_orderadm_i_dest>-guid.
ls_input_fields-ref_kind = 'B'.
ls_input_fields-objectname = 'PRIDOC'.
INSERT ls_input_fields INTO TABLE lt_input_fields.
CLEAR ls_input_fields.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
CHANGING
ct_input_fields = lt_input_fields
EXCEPTIONS
error_occurred = 1
document_locked = 2
no_change_allowed = 3
no_authority = 4
OTHERS = 5.
ENDIF.
ENDLOOP.
" F_MODIF_CONDITION_PRIX
*& Form F_LOCK_DOCUMENT
* Verrouillage d'un document
FORM f_lock_document USING pd_guid TYPE crmt_object_guid.
CONSTANTS : lc_orderadm_h TYPE crmt_object_name VALUE 'ORDERADM_H',
lc_orderadm_i TYPE crmt_object_name VALUE 'ORDERADM_I'.
DATA: lv_process_mode TYPE crmt_mode,
lv_order_initialized TYPE crmt_boolean,
lv_process_type TYPE crmt_process_type,
lv_already_locked TYPE abap_bool.
DATA: ls_admin_ui_status TYPE crmt_admin_ui_status,
ls_item_usage_range TYPE crmt_item_usage_range.
DATA: lt_objects_to_read TYPE crmt_object_guid_tab,
lt_requested_objects TYPE crmt_object_name_tab,
lt_item_usage_range TYPE crmt_item_usage_range_tab,
lt_locked_contract TYPE crmt_object_guid_tab.
INSERT pd_guid INTO TABLE lt_objects_to_read.
INSERT lc_orderadm_h INTO TABLE lt_requested_objects.
INSERT lc_orderadm_i INTO TABLE lt_requested_objects.
ls_item_usage_range-sign = 'E'.
ls_item_usage_range-value = '02'.
INSERT ls_item_usage_range INTO TABLE lt_item_usage_range.
* LAM: Financing Options should be viewed in a separate screen:
ls_item_usage_range-sign = 'E'.
ls_item_usage_range-value = '05'. "Financing options
INSERT ls_item_usage_range INTO TABLE lt_item_usage_range.
*-> read document in change mode
CALL FUNCTION 'CRM_ORDER_READ'
EXPORTING
it_header_guid = lt_objects_to_read
iv_mode = 'B'
it_requested_objects = lt_requested_objects
it_item_usage_range = lt_item_usage_range
EXCEPTIONS
document_not_found = 1
error_occurred = 2
document_locked = 3
no_change_authority = 4
no_display_authority = 5
OTHERS = 6.
PERFORM enqueue_order IN PROGRAM saplcrm_order_ow IF FOUND
USING pd_guid
abap_false
abap_false
abap_false
CHANGING sy-subrc
lv_already_locked
lt_locked_contract.
" F_LOCK_DOCUMENT
* Fin Ajout CD1K904074-001
FORM f_header_copy_pricing USING pd_guid_src
pd_guid_dest.
DATA : ld_pd_handle_src TYPE prct_handle,
ld_pd_handle_dest TYPE prct_handle,
lt_komv_print_src TYPE prct_cond_print_t,
lt_komv_print_dest TYPE prct_cond_print_t,
ls_komv_print_dest LIKE LINE OF lt_komv_print_dest,
ls_komv_print_src LIKE LINE OF lt_komv_print_src,
lt_cond_chg TYPE prct_cond_print_t,
ls_cond_chg TYPE prct_cond_print,
ls_input_fields TYPE crmt_input_field,
lt_input_fields TYPE crmt_input_field_tab.
DATA : bal_log TYPE balloghndl,
lt_cond_ret TYPE prct_cond_print_t,
ld_data_changed TYPE xfeld,
gv_decimal TYPE usdefaults-dcpfm.
* Verrouillage des documents source et destinataire
PERFORM f_lock_document USING pd_guid_src.
PERFORM f_lock_document USING pd_guid_dest.
* Récupérer le pricing handle des documents
* Document source
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
EXPORTING
iv_header_guid = pd_guid_src
IMPORTING
ev_pd_handle = ld_pd_handle_src
EXCEPTIONS
error_occurred = 1
handle_determination_error = 2
orgdata_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
RETURN.
ENDIF.
* Document destinataire
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
EXPORTING
iv_header_guid = pd_guid_dest
IMPORTING
ev_pd_handle = ld_pd_handle_dest
EXCEPTIONS
error_occurred = 1
handle_determination_error = 2
orgdata_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
RETURN.
ENDIF.
* * Récupérer les pricing document
* Document Source
CALL FUNCTION 'PRC_PD_HEAD_SHOW'
EXPORTING
iv_pd_handle = ld_pd_handle_src
IMPORTING
et_komv_print = lt_komv_print_src
EXCEPTIONS
non_existing_handle = 1
ipc_error = 2
OTHERS = 3.
CHECK sy-subrc EQ 0.
* Document Destinataire
CALL FUNCTION 'PRC_PD_HEAD_SHOW'
EXPORTING
iv_pd_handle = ld_pd_handle_dest
IMPORTING
et_komv_print = lt_komv_print_dest
EXCEPTIONS
non_existing_handle = 1
ipc_error = 2
OTHERS = 3.
CHECK sy-subrc EQ 0.
* * Modification et Suppression des conditions de prix
LOOP AT lt_komv_print_src INTO ls_komv_print_src .
CLEAR: ls_cond_chg,
ls_komv_print_dest.
MOVE-CORRESPONDING ls_komv_print_src TO ls_cond_chg.
* Rechercher la condition sur le document source
READ TABLE lt_komv_print_dest INTO ls_komv_print_dest WITH KEY kschl = ls_komv_print_src-kschl
zaehk = ls_komv_print_src-zaehk.
IF sy-subrc EQ 0.
IF ls_komv_print_src-kbetr NE ls_komv_print_dest-kbetr.
ls_cond_chg-kbetr_prt = ls_komv_print_src-kbetr_prt.
ls_cond_chg-kwert = ls_komv_print_src-kwert.
ls_cond_chg-kinak = ls_komv_print_src-kinak.
CASE gv_decimal.
WHEN space. "format N.NNN,NN
REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
WHEN 'Y'. "format N NNN NNN,NN
REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
ENDCASE.
ENDIF.
ENDIF.
CLEAR ls_cond_chg-krech.
INSERT ls_cond_chg INTO TABLE lt_cond_chg.
CLEAR ls_cond_chg.
ENDLOOP.
CALL FUNCTION 'PRC_INT_HEAD_INPUT'
EXPORTING
iv_pd_handle = ld_pd_handle_dest
iv_bal_log = bal_log
it_cond_prt = lt_cond_chg
iv_req_ret = abap_true
iv_req_cond_prt = abap_true
IMPORTING
et_cond_prt = lt_cond_ret
ev_data_changed = ld_data_changed
EXCEPTIONS
non_existing_handle = 1
ipc_error = 2
not_allowed = 3
OTHERS = 4.
CHECK sy-subrc EQ 0.
* * Publish event afin de sauvegarder les conditions de prix
CALL FUNCTION 'CRM_EVENT_PUBLISH_OW'
EXPORTING
iv_obj_name = 'PRIDOC'
iv_guid_hi = pd_guid_dest
iv_kind_hi = 'A'
iv_event = 'SAVE'
EXCEPTIONS
OTHERS = 1.
* As no order_maintain will follow implicitly and therefore no
* exec times for the events will be set, call CRM_ORDER_MAINTAIN
* without any parameters
* Then the exec time 'end of document' will be set and with the
* group logic also all exec times before
* But at least one object is needed in input_fields
* --> use PRIDOC
ls_input_fields-ref_guid = pd_guid_dest.
ls_input_fields-ref_kind = 'A'.
ls_input_fields-objectname = 'PRIDOC'.
INSERT ls_input_fields INTO TABLE lt_input_fields.
CLEAR ls_input_fields.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
CHANGING
ct_input_fields = lt_input_fields
EXCEPTIONS
error_occurred = 1
document_locked = 2
no_change_allowed = 3
no_authority = 4
OTHERS = 5.
ENDFORM.
FORM f_header_copy_pricing USING pd_guid_src
pd_guid_dest.
DATA : ld_pd_handle_src TYPE prct_handle,
ld_pd_handle_dest TYPE prct_handle,
lt_komv_print_src TYPE prct_cond_print_t,
lt_komv_print_dest TYPE prct_cond_print_t,
ls_komv_print_dest LIKE LINE OF lt_komv_print_dest,
ls_komv_print_src LIKE LINE OF lt_komv_print_src,
lt_cond_chg TYPE prct_cond_print_t,
ls_cond_chg TYPE prct_cond_print,
ls_input_fields TYPE crmt_input_field,
lt_input_fields TYPE crmt_input_field_tab.
DATA : bal_log TYPE balloghndl,
lt_cond_ret TYPE prct_cond_print_t,
ld_data_changed TYPE xfeld,
gv_decimal TYPE usdefaults-dcpfm.
PERFORM f_lock_document USING pd_guid_src.
PERFORM f_lock_document USING pd_guid_dest.
* Récupérer le pricing handle des documents
* Document source
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
EXPORTING
iv_header_guid = pd_guid_src
IMPORTING
ev_pd_handle = ld_pd_handle_src
EXCEPTIONS
error_occurred = 1
handle_determination_error = 2
orgdata_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
RETURN.
ENDIF.
* Document destinataire
CALL FUNCTION 'CRM_PRIDOC_GET_HANDLE_OW'
EXPORTING
iv_header_guid = pd_guid_dest
IMPORTING
ev_pd_handle = ld_pd_handle_dest
EXCEPTIONS
error_occurred = 1
handle_determination_error = 2
orgdata_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
RETURN.
ENDIF.
* * Récupérer les pricing document
* Document Source
CALL FUNCTION 'PRC_PD_HEAD_SHOW'
EXPORTING
iv_pd_handle = ld_pd_handle_src
IMPORTING
et_komv_print = lt_komv_print_src
EXCEPTIONS
non_existing_handle = 1
ipc_error = 2
OTHERS = 3.
CHECK sy-subrc EQ 0.
* Document Destinataire
CALL FUNCTION 'PRC_PD_HEAD_SHOW'
EXPORTING
iv_pd_handle = ld_pd_handle_dest
IMPORTING
et_komv_print = lt_komv_print_dest
EXCEPTIONS
non_existing_handle = 1
ipc_error = 2
OTHERS = 3.
CHECK sy-subrc EQ 0.
* * Modification et Suppression des conditions de prix
LOOP AT lt_komv_print_src INTO ls_komv_print_src .
CLEAR: ls_cond_chg,
ls_komv_print_dest.
MOVE-CORRESPONDING ls_komv_print_src TO ls_cond_chg.
* Rechercher la condition sur le document source
READ TABLE lt_komv_print_dest INTO ls_komv_print_dest WITH KEY kschl = ls_komv_print_src-kschl
zaehk = ls_komv_print_src-zaehk.
IF sy-subrc EQ 0.
IF ls_komv_print_src-kbetr NE ls_komv_print_dest-kbetr.
ls_cond_chg-kbetr_prt = ls_komv_print_src-kbetr_prt.
ls_cond_chg-kwert = ls_komv_print_src-kwert.
ls_cond_chg-kinak = ls_komv_print_src-kinak.
CASE gv_decimal.
WHEN space. "format N.NNN,NN
REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
WHEN 'Y'. "format N NNN NNN,NN
REPLACE ALL OCCURRENCES OF '.' IN ls_cond_chg-kbetr_prt WITH ','.
ENDCASE.
ENDIF.
ENDIF.
CLEAR ls_cond_chg-krech.
INSERT ls_cond_chg INTO TABLE lt_cond_chg.
CLEAR ls_cond_chg.
ENDLOOP.
CALL FUNCTION 'PRC_INT_HEAD_INPUT'
EXPORTING
iv_pd_handle = ld_pd_handle_dest
iv_bal_log = bal_log
it_cond_prt = lt_cond_chg
iv_req_ret = abap_true
iv_req_cond_prt = abap_true
IMPORTING
et_cond_prt = lt_cond_ret
ev_data_changed = ld_data_changed
EXCEPTIONS
non_existing_handle = 1
ipc_error = 2
not_allowed = 3
OTHERS = 4.
CHECK sy-subrc EQ 0.
CALL FUNCTION 'CRM_EVENT_PUBLISH_OW'
EXPORTING
iv_obj_name = 'PRIDOC'
iv_guid_hi = pd_guid_dest
iv_kind_hi = 'A'
iv_event = 'SAVE'
EXCEPTIONS
OTHERS = 1.
ls_input_fields-ref_guid = pd_guid_dest.
ls_input_fields-ref_kind = 'A'.
ls_input_fields-objectname = 'PRIDOC'.
INSERT ls_input_fields INTO TABLE lt_input_fields.
CLEAR ls_input_fields.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
CHANGING
ct_input_fields = lt_input_fields
EXCEPTIONS
error_occurred = 1
document_locked = 2
no_change_allowed = 3
no_authority = 4
OTHERS = 5. -
Pricing condition redetermination for sales order created with reference
Hi,
Are there any exit or routines that can be used to redetermine MWST pricing condition alone when creating sales order with reference to another sales order? The pricing from preceeding sales order is copied but we need only MWST to be redetermined after saving the order
This is because we are making changes so that while saving the sales order the material tax classification is defaulted to M based on some conditions so that MWST picks up the value M
Regards,
VinHello Vinod ,
did you tried following options :-
1.Using Exit ( MV45aFzz) and re calculte pricning using FM 'PRICING'.
2.or Using Copy Control (Tcode : VOFM ) while creating order with Ref.
regards
Prabhu
Maybe you are looking for
-
How can I add multi columns to a JCombo Box ?
Dear experts, How can I add multi columns to a JCombo Box ? Thankx in advance Unique
-
Hi all, I am trying to push my sld data to Sol Man 4.0. I have set up smsy_setup and ran sldcheck and set up sldapicust and everything seems o.k. but when I try to execute the job to pull data (SMSY_SETUP) and I review the update log I see a message
-
I tried to install firefox 32 and no websites would load and also the process would not close. I tried disabling ipv6 turning my router settings so there is only ipv4 connection and disbaled also dns prefetching and set network settings to no proxy.
-
I just downloaded iCloud InDesign (after using the trial for a month) from the Adobe website and the following Adobe Application Manager error popped up: "Adobe Genuine Software Validation Failure: The product you are trying to install is not an Adob
-
Macbook (not pro) running bootcamp no audio
need help peeps have my macbook witch is the 1.83ghz intel duo running bootcamp on windows 7 and i have no auio can somone send me some links to solve the problem thanks