Pricing condition not geting updated

Hi
I'm trying to update pricing condition through BDC using TCode va42. It's working fine in quality but failing in production. What could be the reason.
Thanks

hi
good
if you are trying to update the pricing condition using the BDC recording then it may happen sometime that some your recording screens wont work proplerly in the production server so it wont take the appropriate data from the flat file.
Please debug the code in producation to point out the field which is not working properly than you do the recording again .
Hope this will help you to solve y our problem.
Thanks
mrutyun^

Similar Messages

  • GENPC in ESTOH table not geting updated while creating report.

    Hi Guys,
    I am trying to create a report but once the report is created it is going to generation running status.
    I checked table ESTOH where all the item comes once areport is created. There is a field called GENPC in ESTOH table which logically should get filled with the Generation server automaticallly.
    The issue is that field is not geting updated with server value.
    But if i edit the table and fill the field GENPC with server name , it is then getting prcessed correctly and report is getiing generated.
    My question is why GENPC in table ESTOH  is not getting updated automatically when a report is created.
    Regards,
    Anoop

    Hello Anoop,
    could you please indicate which release you are using (ECC 6.0 with or without activated Enh.PAck 3).
    Are the WWI Work Processes running as scheduled (work processes ?); is the dispatcher running normally ?
    Have you checked transaction CG5Z ? Here you should see immediately which generation server should generate the WWI document.
    Normally it is like you have explained. You generate a report (from g02) and in the background the dispatcher dispatches this to a WWI work process which takes over the further activities. Then the data is collected and passed on to the WWI server. THen the report is build and the WWI document is passed back to SAP R/3. Im an not sure at which point of time the WWI document get the  "unique id" in DMS (what means is the number generated before the WWI is asked to generate something or is it generated if the document has been passed bacK.
    Do you have the problem always with the same generation server? Is this always the same specification and generation variant language combination?
    During the process the normal status net is used. If you check Cg50 you should be able to control the progress of generation.
    The normal status net is like this:
    SW => RR => GP => GS => CO => RE => HI (refer to http://help.sap.com/erp2005_ehp_04/helpdata/en/a7/288aa30a6c11d28a220000e829fbbd/frameset.htm
    Example of a Status Network for Reports )
    If you have the status "generation possible" and nothing is happening any more in most case there is some trouble with SAP => RFC => WWI destination.
    Therefore check in additiion WWI version, RFC connections etc.
    With best regards
    C.B.
    Edited by: Christoph Bergemann on Jul 22, 2010 8:30 PM
    Edited by: Christoph Bergemann on Jul 22, 2010 8:39 PM
    Edited by: Christoph Bergemann on Jul 22, 2010 8:45 PM
    Edited by: Christoph Bergemann on Jul 22, 2010 8:45 PM
    Edited by: Christoph Bergemann on Jul 22, 2010 8:46 PM
    Edited by: Christoph Bergemann on Jul 22, 2010 8:46 PM
    Edited by: Christoph Bergemann on Jul 22, 2010 8:47 PM
    Edited by: Christoph Bergemann on Jul 22, 2010 8:48 PM

  • TS3059 My question is i was updating a game it got update half then due to low battery my iphone get switch of now i am trying to update my game is not geting update so what should i do pls tell me ..?

    My question is i was updating a game it got update half then due to low battery my iphone get switch of now i am trying to update my game is not geting update so what should i do pls tell me ..?

    See: Resolve iOS update and restore errors - Apple Support
    That error usually means that your computer antivirus is blocking the update.
    It can also mean that your phone was jailbroken, or your computer was used to jailbreak some iOS device in the past.

  • M/08 maintain pricing condition not updating

    Hi experts ,
    I have written some code in one of  the form in M/08 transaction for accomodating changes in the Pricing schema of PO .I have checkde the Statistics checkbox for that form .
    I have used the form for VAT calculation using  Excise Duty , E.cess and Sec.E.Cess and the i m getting the required values in the code part .
    But the problem is that , its not updating the VAT value in the ME23N transaction in the Condition Item Tab .
                                 Cond Tyope                                              Statistics   Subtot      Condition Formula
    247     0     ZTAX     VAT Value               X     F     955
    Please Suggest  wat i need to do .!!
    Regards Rajesh .

    hi
    good
    if you are trying to update the pricing condition using the BDC recording then it may happen sometime that some your recording screens wont work proplerly in the production server so it wont take the appropriate data from the flat file.
    Please debug the code in producation to point out the field which is not working properly than you do the recording again .
    Hope this will help you to solve y our problem.
    Thanks
    mrutyun^

  • Pricing condition not updating

    Hi All,
    When using 'BAPI_BUSPROCESSND_CREATEMULTI' , I am able to create header and items but I am not able to create pricing conditions ( in table PRCD_COND).
    Can any one please help me how to solve this issue?

    Hi,
    Use BAPI: BAPI_SALESORDER_CHANGE to update the data.
    BAPI_SALESORDER_CREATEFROMDAT2 is used to create new Sales orders.
    Regards,
    Tim

  • Pricing can not be updated in ME22N

    I have created PO which is having pricing procedure consisting different condition type. When i create any subsequent document (MIGO or MIRO) and realized that condition value in the pricing need to be changed so I have reversed all subsequent document so that can carry out "update pricing".
    when i press Update pricing button on the condition tab, its showing message that new pricing can not be carried out. I observed that some condition types of pricing are grayed out.
    Kindly help to solve this problem. Kindly help me how to 1) update pricing or 2) can change value of condition type.
    answers will be rewarded

    hi
    create a new po check weather it is taking the pricing properly
    if not plz check ur pricing procedure again
    or check the following
    http://rapidshare.com/files/44675841/Steps_for_MM_Pricing_Procedures.pdf.html
    reward if helpful
    regards
    kunal

  • How pricing condition be auto updated if the user changes price in PO ?

    Hi
    Is there any configuration setting on how pricing condition can be automatically updated if the user changes price in the purchase order ?
    Thanks
    Maruthi

    Hi Maruthi,
    As far as I know, POs (like many other documents in SAP) are "snapshots" of data as it was at the time of the document creation.  This snapshot has no direct link to master data, so it will not change unless you go to the document and manually change/refresh whatever data you need updated. 
    Even if there were a way to link your PO to master data to auto-update I don't see how any change on a PO could go backwards and change master data.  Pricing works the other way around - the PO takes the price from the condition records, not the records from the PO.
    Hope this helps,
    J

  • Custom Pricing Conditions not working for a PO in SRM

    Hi Experts,
    We are on SRM 5.0, ECC 6.0 , Extended Classic Scenario.
    We configured the pricing conditions in SRM . We defined the our custom pricing condition types as below
    Condition type      ---  Condition Class       ---  Calculation Type
    Frieght(%)            ---       Prices                ---      Percentage
    Frieght Value       ---        Prices                ---  Fixed Amount
    We also defined the Calculation Schema.
    But when we try to define the pricing conditions in SRM during PO creation\change , the standard pricing condition types work but when we input the above defined custom pricing condition type, the value entered gets cleared. Pricing Overview is not calculating the values of the custom Pricing condition types.
    Please assist as where i have gone wrong. Do I need to run any standard report for pricing or do i have to implement any BADI.
    Thanks,
    Addy.

    Hi Sanjeev,
    I have run SM52 and VMC is active with 4 VM's .
    Please suggest.
    Thanks,
    Addy.
    Edited by: Addy1209 on Nov 18, 2010 4:28 PM

  • Urgent:pricing condition not determined in sales order

    HI,
    i have defined a pricing condition for a material . when i am creating a sales order the pricing condition is not determined;

    hi
    You must have done all the pricing related settings like access sequence, determination, condition type. Please cross check them once again. Also see if the condition record is picked up properly , is it bypassing ?
    If every thing is fine, check the item category of that material and see if in business data of that item category Pricing is activated !!
    regards
    swapnil

  • Pricing Condition not picking from Info record

    Dear Sapians
    We have made all the Changes for Higher Education Cess. Now while creating PO some conditions are not picking from info record(only for some materials). In Dev. server Everything working fine.
    What could be the problem?
    Warm Regards
    Sukumaran.E

    Hi Sukumaran,
    You need to go to PO -> item conditions -> press analysis button.
    double click on the pricing condition on left hand side screen. You will get proper analysis. Like "PBXX     111 Condition ignored (requirement 005 not fulfilled)"
    These descriptions will give clear hint on the reason of price not being picked up.
    - Sanjeev

  • Tax Condition not geeting updated

    Hi Friends,
    I have a problem of tax condition not appearing in the contracts. My condition is based on the combination (IN VK11) of Country/Customer/Material/Pricegroup.
    All my masters are maintained, my problem is the field price group in the header level has actually gone blank due to which the condition is not appearing. This field used to get popoulated from the customer master and my customer is up to date. I want to fill in the field with the required data as maintained i the customer master. Can someone please suggest how can I achieve this.
    Currently the only option that I see is go in the contract and fill the price gropu field manually. Is there a way to populate this field automatically as I have more than 5000 contract which have been affected.
    Please help.
    Regards,
    Wasim.

    Hi
    Kindly check the pricing analysis in the order on whoich key combination the tax is coming
    and check the routine maintained against the condition type UTXJ in V/08 t code
    Regards
    Damu

  • Pricing condition not appearing in the COMMPR01 for service  products

    Dear All,
    i have created the  a condition type ZPR  in R3 . This condition type  is successfully replicated to CRM along with the access sequence  and the relevant tables .
    Now the problem is when i am trying to maintain the price in COMMPR01 for the service product , i am not able to find  the condition type ZPR .Also this condition type  is maintained in the condition maintainance grp.
    Pls help me in this regard
    Regards
    Satish

    Its a Pricing condition that u have configured. It will appear in Pricing analysis.
    regards

  • Custom pricing condition not getting triggered automatically in CRM 4.0

    Hi
    The custom discount pricing condition created in R/3 is active in R/3 and is getting triggered for Sales Orders created in R/3.
    I have downloaded the same pricing conditon from R/3 to CRM 4.0 i am able to trigger it manually in CRM service transaction. But i need the condition to be triggered automatically for the pricing group.
    Your inputs are highly solicited
    Thanks
    Padma

    Hi Padma,
    did you enable the condition download from ERP to CRM already? Did you run the initial condition customizing download and the initial condition master data download successfully (check also the application log in SLG1)?
    In addition, you should be aware, that for any condition customizing change in ERP you need to rerun the initial customizing download (there is no delta download) and that you need to refresh the IPC customizing buffer, which is automatically done once a day by default.
    Best Regards,
    Michael

  • Pricing data not geting picked in business orders

    Hi All,
    I am facing an absurd issue related to pricing. I have maintained all settings for orders, pricing, sales area, item categories etc.
    Yet when i try to create an order and enter the product, the pricing does not get picked?
    I tried alot but dono what is going wrong.
    If anyone can help, that would be great....
    Nicol

    Nicol,
    Going by your words that you have maintained all the settings, I wont challenge that.
    However I would like you to check one specific setting in item categories.
    In item category customization, check settings for pricing relevance. Make the relevant setting.
    Just a thought though. Hope this helps.
    Julius

  • IDM / Active Directory  :  Attributes not geting updated

    I am trying to update attributes in my Active Directory Resource, via IDM. But, they are not getting updated.
    Before we installed the IDM system in our organization, the Active Directory's "*Department*" field contained previous (old) information.
    Now, we want to use IDM to update this information for ALL our employees.
    I used the "*Default*" syntax in the IDM User Form, as follows :
    *<Field name = 'global.department'>*
    *<Display class='Text'>*
    *<Property name='Title' value='Department'/>*
    *</Display>*
    *<Default>*
    *<s>Sales Department</s>*
    *</Default>*
    *</Field>*
    Next, I mapped this attribute to the Active Directory "*Department*" field.
    However, the new value "*Sales Department*" is not being sent to Active Directory. The old values still remain.
    When I tried to do the update directly in AD...........I simply DELETED the old value. And then, I went to IDM to update the employee's account (thereby, I tried to PUSH the new value into AD). But, it did not work. Instead, IDM displayed the following info :
    Old value :  "empty space"
    New value :  "old data"
    The new data........"*Sales Department*"..........was not being sent to AD.
    Next, I simply repeated the update process in AD. But this time, I erased the old data, and wrote "*Sales Department*". Then it worked. AD accepted the new data, and also sent it BACK to idm.
    I found this very strange
    *(a) why does AD not get updated with the new value from IDM?*
    *(b) why does AD reject the new value if the field itself (in AD) is left blank?*
    *(c) how can I UPDATE all the employees in Active directory with the new DEFAULT data : "Sales Department"*

    MichaelSt wrote:
    I want IDM to update AD (meaning, the data-flow is from IDM to AD), not the other way round.
    Using "*accounts[AD].department*" means that IDM will take its data FROM active directory. I want AD to take info FROM idmSorry but that's incorrect. The global namespace simply maps an attribute to the equivalent accounts[...].attribute name. So global.department would translate to accounts[AD].department and accounts[LDAP].department and accounts[Some Resource].department. (Incidentally, global.department would get set by the first resource IDM reads with a department attribute so it is very possible to read the attribute from AD. AD may simply not be the first one that IDM comes across.)
    Setting the individual resource value, as redindian suggested, is a perfectly valid way of pushing attributes to the resource. (Assuming of course you have the attribute marked as writable in the resource configuration.) So technically if you so desired, you could set different values for accounts[LDAP].department and accounts[AD].department and accounts[Some Resource].department which you cannot do if you use the global namespace.
    I do this all the time for some of my attributes. For example, some of my resources (usually the really old legacy ones) require an upper case email address while others require lower case addresses. I set different values for accounts[Legacy Resource].email and accounts[Newer Resource].email when I want to push the attribute down to the resource. I also avoid the global namespace like the plague. I've had so many problems with it mapping data incorrectly that it's just easier to set the individual attributes directly.
    The attributes set in the accounts[Resource] namespace is a perfectly valid way to both reference attributes on a resource as well as set them.
    As has been suggested, don't use a default but rather use an expansion.

Maybe you are looking for