Pricing Configuration - Manual Flag

Hello! I've done some searches but can't find specifically what I am looking for. My question is this - In the pricing procedure configuration when the manual copy flag is checked which copies the value from the source document, if there is a value in the CalType or BasTyp field does this override the copy from the source document?
Thanks!

Well I think your source document is the Condition Record saved at VK11. Only the manual check box in Pr.Procedure won't permit for manual entry in the documant, it will work along with the mannual entry priority in condition type, Hence it copies from your source doc. (Condition Record)
And if there is any formula/routine mentained in CalTy then it will ignore the condition type (saved in Condition Record). Based on the formula it will calculate the value.
Hope this will help you.
Edited by: Sarat Orissa on Mar 1, 2010 4:11 PM

Similar Messages

STO PRICING INTERCOMPANY MANUAL PRICING IN STO also

Hi ,
I know there is lot of info available reg STO on this forums .But i am looking for detailed step by step configuration involved for Pricing in intercompany STO process.If its posted on this forum please provide the link.I will be thankful and full points will be awarded
Please guide me in doing Pricing configuration for intercompany STO process in detail steps. full points will be awarded.
One more thing is I also need detail steps for manual pricing in STO Intercompay process.Please guide me how to proceed
Thanks

Hello,
Is ZPRO is copy of PI01.If yes, make sure Ref cond tab should be blank (V/06).
Check Sequence in your pricing procedure(V/08).Zpro & Zk04 Should be before net value calculation.
If Pi01 is not required then you can determine new pricing procedure in intercompany billing.
Revert if not resolved.
Regards
Amit

Configure manual bank statement ff67

Hi!
I am configuring manual bank statement in ff67 for my Indian customer (I am from Sweden and has not worked with it before).
I have created three banks accounts:
One main account
One incoming account
One outgoing account
I have also created the house bank.
How do I configure transaction code named ZBSR for outgoing payment with assignment reference and ZBSD for incoming payment.
Thank you very much in advance!
BR Åsa

Hi.
The customizing is difference according to your business requirement.
For example you have a customer invoice document:
01 customer 100 USD / 50 revenue 100 USD.
Then you want to clearing Customer invoice direct with bank account in FF67
then you have to define in your posting rule , posting area:2, as below:
Posting Key         40                                    Posting Key
Sp.G/L Indicator                                          Sp.G/L Indicator
Acct symbol         Bank account                   Acct symbol
Document Type       DZ
Posting Type             8
Posting on acct key
Reversal Reason
if you want to use a Interim bank account to clearing the inovice, then you should define
then you have to define in your posting rule as below:
Posting area 1
Posting Key         40                 Posting Key         50
Sp.G/L Indicator                       Sp.G/L Indicator
Acct symbol         BANK            Acct symbol       bank clearing account
Posting Key         40                                    Posting Key
Sp.G/L Indicator                                          Sp.G/L Indicator
Acct symbol        bank clearing account        Acct symbol
Document Type       DZ
Posting Type             8
Posting on acct key
Reversal Reason
So it is necessary to do the customzing based on your business reqirements.
and in your case->you want the account 198001 to be credited in ff67 and account 198000 to be debited
Can you confirm whether the bank account defined in FI12 in your hourse bank/bank key is 198000, if yes, then you could define account symbol as below
Acct symbol: Bank with **********
Acct symbol:bank clearing account      with *********1
then the following document will be posted after run FF67
40 198000   100 USD/ 50 198001      100 USD
40 198001   100 USD/ 15 customer 100 USD
The vendor is the same senario.
Hope above information are useful to you!
Addition, you can use T-cd:OFTD, menu->business volumn->manually bank statement to find all customizng you should define.
With Best Regards,
Gladys Xing

Transfer pricing configurations in Profit Center accounting

Hi SAP Gurus,
Whether for performing transfer pricing configurations in Profit center accounting and performing transfer pricing transactions whether activation of material ledger is compulsory.

No its not compulsory.You have to do only if you want to track internal revenues i.e goods or services transfer between profit centers.

Error when building the Java pricing userexit manual code

I went throught the manual for the pricing userexit manual... it tells you to ignore the errors when you do an ant build but I want to remove all the errors since they dont let the rest the code compile.... where are the jars for these errors:
[javadoc] C:\DEV\PRC_UE_CUSTOMER\lib_src\src\com\sap\spc\document\DocumentConstants.java:16: package com.sap.vmc.logging does not exist
     [javadoc] import com.sap.vmc.logging.Category;
     [javadoc]                            ^
     [javadoc] C:\DEV\PRC_UE_CUSTOMER\lib_src\src\com\sap\spc\document\DocumentConstants.java:26: cannot resolve symbol
     [javadoc] symbol : class Category
     [javadoc] location: class com.sap.spc.document.DocumentConstants
     [javadoc]     public static final Category CATEGORY = Category.getCategory(Category.APPLICATIONS, "/AP/SPC/Document");
     [javadoc]                         ^

See the [SAP note 809820 - Userexit concept for pricing|https://service.sap.com/sap/support/notes/809820]
Use ZIP file the attached to the above note - PRC_UE_CUSTOMER_V105.zip
ZIP file contains an Eclipse .project file that has the required build path. If you read the documents carefully, it does refer this project file.
<?xml version="1.0" encoding="UTF-8"?>
<classpath>
     <classpathentry kind="src" path="src"/>
     <classpathentry sourcepath="lib_src/src" kind="lib" path="lib_api"/>
     <classpathentry kind="lib" path="lib_vmc_api/base_services_stripped_api.jar"/>
     <classpathentry kind="output" path="bin"/>
</classpath>
Again read the documents thoroughly. They are neither fictions nor non-fictions, but technical documents written with care. So, we must also read them with care. If we don't follow them, then it is time to engage someone who does. )
BTW, coming back to the Java basics - One must have a class and source files to debug. You won't get a class file unless it is compiled. The Java file won't compile correctly if it has syntax / reference errors. Unfortunately or fortunately, all these apply to the IPC java userexit development as well.
Easwar Ram

Cisco Aironet Configuration Manual

I am new to Cisco Wireless Configuration. Anyone know please is there any website I can surf for Cisco Wireless Configuration Manual. Thanks to anyone who drops me a response.

Try this:
http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/350cards/windows/legacy/scg/
Shawn

Service industry pricing configurations

Hi Experts,
Could you brief me the pricing configuration for the Service industry (Logistic or Couriers)
Here we need to consider out going consignments are chargeable and incoming consignment are free (Ex: Mobile billing)
Thanks in Advance.
Regards
Priya.

Hi Namita,
Thats why i mentioned CRM2007
If on CRM7.0, we dont have reason maintenance but have all new Multiple Categorization concept introduced.
As PePe says, Service Request and Service Ticket are all different transactions as they have different Buss. Objects. Service Request is new thing from CRM7.0 .Earlier we had only service tickets where you can maintain the reasoning.
Depending your Project Realization mapping as decided by Solution Architech, either service req. or service tickets should be used. Now since you are using Service requests, we have to fullfill your needs there only.
If you want, you can still get the Reason dropdown in WEB UI thought development. Add BTSUBJECT in the view and do the coding to read your subject profile , subject codes and show the texts. This will be pure development but i dont see much effort as you are still doing it in BT model. I would recommand to go with categorizations only as its SAP std. suggested for Service Requests scenario. Maintaining Categorization and schema is failrly simple however i feel SAP has un-necessarily complecated it. Follow the help.sap.com categorization under CRm service. They have nice explanations. We generally maintain categorization from WEB UI only and not through SPRO.
Let me know if you stuck up on coding part as i have already done it, i may help you.
Thanks & Regards,
Suchita

Integrating internet pricing configuration with SAP portal

hi all,
Internet pricing configuration whic is a part of CRM is used for configuring products online. Is it possible to integrate it with SAP portal?
Thanks in advance
Ramanan

hi,
pls check the below links for reference:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/24396589-0a01-0010-3c8c-ab2e3acf6fe2
searchsap.techtarget.com/searchSAP/downloads/chapter-december.pdf
1)Learn to implement the reverse proxy filter and portal gateway in SAP Enterprise Portal 6.0 on Web Application Server 6.40.
https:/.../irj/sdn/nw-portalandcollaboration?rid=/webcontent/uuid/006efe7b-1b73-2910-c4ae-f45aa408da5b
.2 )Configuring the Portal for Your Reverse Proxy Filter Solution . ... This document describes the reverse proxy filter mechanism in SAP Enterprise ...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/32ad9b90-0201-0010-3c8a-c900cd685f8f
3)have full reverse proxy functionality. Possibly. filter. requests. Internet ... Reverse proxy (optionally with authentication etc.) ...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c066c390-0201-0010-3cba-cd42dfbcc8be
Note:please reward points if solution found helpfull
Regards
Chandrakanth.k

Internate Pricing Configurator

Hi All,
Does somebody have Internate Pricing Configurator (IPC) document? I am in an immediate need.
Please send link.
Regards,
Nikhil

Hi,
You need not do any configuration for IPC in CRM 5.0 or CRM 6.0. If your basis team had activated the IPC engine in your landscape. You should be able to see the pricing related details in your conditions tab of any transaction. So this would be your check point whether IPC is working or not..
The note which i have suggest is for advance technical users to modify the pricing routines and enhance the IPC functionalities.
Regards,
Karunakar.

Reg:PP Configuration Manual

Dear Guru,
I am going to implement the pp module first time so kindly send me the pp configuration manual (Both Discrete and process manual) to me.
Regards
Amar Puhan

Hi,
These are the basic configuration settings you need to maintain. Apart from this, as per user's requirement you may need do configure more.
Factory Calendar
               Configuring SAP calendar
                Define Public Holidays
          Define Hoiliday Calendar
          Creation of Factory Calendar
Basic Data
                Bill of Material
                Define Modification Parameters
          Define BOM Usages
          Define Material Types For BOM Header
          Define Item Categories used for Item Data
          Define allowed Material Types for BOM Items
          Define Order of priority for alternative BOM usages
Work center
                Define WorkCenter Category
          Define Field Selection for Work Center
          Define Task List Usage for Workcenters
          Define Parameters for Standard Value Key
          Define Standard Value Key
          Define Person Responsible for work Centers
          Define Move time Matrix
          Define Default Work Center
          Default Control Keys
          Define Capacity Categories
          Define Capacity Planners
          Define Shift Sequence
          Define Worcenter Formulas
          Define Work Center Formulas for Costing
     Routing
               Define Number Ranges for Routings
          Define Field Selection
          Define Material Type Assignments
          Select Automatically (Routing Selection)
          Define Task List Usage
          Configure Planner Group
          Configure Control Keys
          Define Reduction Strategy
          Define Relevancy to Costing
          Define (Standard) Trigger Point Usage
          Define Automatic Selection of Routings
Production Planning
        Demand Management
                Define number ranges for planned independent requirements
          Configuring Requirement Types and Requiremtent Classes
          Define Strategy
          Define Strategy Group
          Define version numbers
          Maintain consumption mode and period of adjustment
CRP          Define layout keys
          Define layout
          Define profile for capacity planning table
          Define Overall profile
Material Requirement Planning     Plant Parameters
               Carry Out Overall Maintenance of Plant Parameters
          Scheduling Parameters for Purchasing
          Number Range for Planned orders
          Number Range for Puchase Requisitions
          Define MRP Controllers
          Define Missing Parts MRP Controller
          Define Special Procurement Type
          Maintain Planning Calendar
          Define MRP Areas
          Define Scope of Planning for Total Planning
          Define Planning Horizon
          Activate BOM Expllosion characteristics
          Define Planning Time Fence and Roll Forward Period
          Define Floats (Scheduling Margin Key)
          Define Parallel processing for MRP
          Define Receipt days Supply
          Parameters for Determining the Basic Dates
          Define scheduling parameters for planned orders
          Define availability stock in Transfer/Blocked stock/Restricted stock
          Define External Procurement
          Define BOM Explosion Control
          Define BOM Explosion for Sales Orders
          Define BOM and Routing Selection
          Activate MRP and Set Up Planning File
          Define Planning File Entries for Goods Movements
          Convert Planning File Entries for MRP Areas
Shop Floor Control     Master Data
               Define Order Types
          Define order type-dependent parameters
          Production Status Profile
          Define number ranges for orders
          Define number ranges for confirmations
          Define number ranges for reservations
          Define production scheduler
          Define production scheduling profile
          Define Confirmation Parameters
          Define Time for Confirmation Processes
          Define Reasons for Variances
          Define single screen entry
          Define Field Selection for Confirmation
          Define Reduction Strategies
          Define Print Control
          Batch Status Mangement
          Batch Search Strategy to Production
          Activate Batch Management
     Availability Check
               Define Checking Group
          Define Checking Rule
          Define Scope of Check
          Define Checking Control
          Checking Rule for Back order Processing
     Scheduling
                Specify Scheduling Type
          Define Scheduling Parameters for Planned Orders
          Define Scheduling Parameters for Production Orders
Regards / US

COPA-Configuration manual

Dear all,
Can anyone send me COPA configuration manual?
My email id is [email protected]
will award good points,
Thanks & Regards,
ar

Dear Friends,
A VERY HAPPY NEW YEAR 2008 and HAPPY SANKRANTI TO ALL.
Can any one forward the Costing based COPA CONFIG and REPORT WRITING (form based) steps at the earliest to mail id : [email protected]
Thanks&Regards,
idr

Configuration Manual

Hi Experts,
I am in the finising stage of the implementation. I am supposed to prepare the configuration manual. Since this is my first implementation, i am not aware how this has to be done. Can some one help me with a sample/model Configuration manual for HR.
Thank you in advance. Assure you points for the help.
Cheers
John
Message was edited by:
        JOHN PETER. X

Hi,
I can just show u a sample based on that u can prepare as of....
1.Maintain Plan Versions
   1.1Functional Component Definition
Plan versions required in the enterprise are set up in this setting. Plan versions offer the possibility to administer several plans parallel in the system. As a rule, one plan version contains an overview of your enterprise's organizational plan.
Evaluations (reports) are always concerned with one plan version. For this reason, it is not advisable to create own plan version for each component of Personnel Planning and Development (Organizational Management, Personnel Development, Personnel Cost Planning and Training and Event Management).
Only one plan version is ever active. This is the integrated plan version, which is considered in the case of integration with Personnel Administration.
1.1.2.     Implementation Guide Menu Path & Transaction code
Path: Tools  Business Engineer  Customising  Project IMG  Personnel Management  Global Settings for Personnel Management  Maintain Plan Versions Transaction Code: OOPV
1.1.3.     How will SAP meet the business/process requirements
Plan version 01 Current Plan will be used and will be active and current. Create new plan versions for copying the existing current and active plan into the new plan version. The new plan version will be used for carrying out the scenario modelling. Scenario modelling will not be carried out in active and current plan version.
1.1.4.     Issues raised
SI. No.     Description of issue     Owner     Resolution date
Reward if helpful,
Regards
Asha

STO Pricing Configuration

Hi ,
I know there is lot of info available reg STO on this forums .But i am looking for detailed step by step configuration involved for Pricing in intercompany STO process.If its posted on this forum please provide the link.I will be thankful and full points will be awarded
Please guide me in doing Pricing configuration for intercompany STO process in detail steps. full points will be awarded.
Thanks

hi,
may be this will help you some what...
have following scenarios to map using SAP transportation module. I need suggestion/idea from you all as to how we can map it perfectly in SAP.
Requirements:
1. Scenario is of goods movement from One plant to another plant within same company code.
2. Receiving plant will create a stock transport order and maintain a freight cost. This freight cost is maintained in STO using a condition type. This is the contractual cost and calculation is based on dispatchedweight.
3. Dispatch plant will create a Replenishement delivery(VL10B) for above created STO. Dispatched weight will be captured in this delivery.
4.At the time of Post goods issue for above delivery following account posting should happen:
Inventory FG Cr. (At despatch Plant ) 48000 (cost of material)
Inventory FG Dr. (At Receiving Plant) 49000 (Cost of material + freight cost)
Freight STO FG Cr. (At Receiving Plant) 1000 (freight cost)
5. Receiving plant will do goods receipt (Received weight is captured).
6. Invoice verification: During this phase accounts department will verify the GR documents and does following determination:
6.1. Whether received weight is different from disptached weight.
6.2. Whether shipment is ontime, early or delayed.
6.3. Whether any transshipment happened or not (based on truck number).
7. After above determination is made an incoming invoice is created using following calculation:
7.1. Base freight = Received weight * contractual freight cost.
7.2. Penalty or incentive is levied based on whether shipment is delayed or early.
7.3. A penalty is levied if transshipment has happened (Transshipment are not allowed as per the contract).
8. payment is made and accounts are cleared.
What I have done so far:
1. Created an outbound shipment type.
2. Created a shipment cost document and shipment item category copying standard item category but with different rule for settlement date.Also, the account assignment category:K, General Modification: VBR, Auto PO generation.
3. Created one new freight condition type with Calculation type: Gross weight, calculation base: delivery. Assigned this condition type to a standard access sequence and created a new pricing procedure.
4. Created two more conditions for Penalty and incentive. Calculation base: All.
Proposed Solution:
1. Create STO. Insert a freight condition with contractual freight cost.2. Create Replenishment delivery.
3. Create an Outbound shipment and assign above delivery to it.
4. Shipment is put in 'Shipment start' when actual goods movement happens. As soon as shipment is saved after 'shipment start' auto goods issue will happen and following accounts will be posted.
Inventory FG Cr. (At despatch Plant ) 48000 (cost of material)
Inventory FG Dr. (At Receiving Plant) 49000 (Cost of material + freight cost)
Freight STO FG Cr. (At Receiving Plant) 1000 (freight cost)
5. Receiving plant will do Goods receipt (MIGO).
6. An custom job will be run after creation of GR document through MIGO which will update received weight in shipment document in a custom field.
7. Shipment status is moved to 'shipment end' and save. At this point a new code is built in userexit which will calculate the difference in 'shipment end' and 'shipment start' and compare this with planned duration of route (maintained in route). A determination of late or early shipment will be done by code and it will update 'special processing indicator' with specific values maintained earlier. Ex: 1 - shipment late by one day, 2- shipment late for two days. The penalty and incentive condition type records will be maintained against this indicator so thatcorrect condition record is called during shipment cost document creation.
8. A new pricing routine is built and assign to the new freight condition. It will look at the received weight maintained in a custom field at shipment level instead considering delivery weight.
9. Shipment cost document is created with reference to above created shipment and transfer of cost is

SLD configuring Manually

Dear All,
During Installation i did not selected SLD installation, can you please tell me how can i do installation and configuration manually without re installation.
Regards,

Hi Nikunj,
It is possible to configure SLD after installation.
Please check following link:
/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak
Regards,
payal Patel

Pricing configuration records

I am looking for a way to copy pricing records from one SAP instance to another. We are able to this with Materials using ALE, but ALE does not appear to be able to handle the pricing configuration. Is there a similar utility or method for copying the pricing information from one SAP instance to another. We want to use this to update Dev and/or QA systems with the current pricing configurations from production.
Thanks
Dave Reclite
Autodesk Inc.

Please check that there is an entry in table MNTNCT in ERP which defines that CRM is responsible for creating/editing the condition records. You can display the conditions only (vk13).
This is the standard behaviour of CRM-ERP integration projects where source of the condition record is CRM.

Pricing Configuration - Manual Flag

Similar Messages

Maybe you are looking for