Pricing doc. does not exist in CRM Sales Doc Creation

Hello gurus
I am new to Sales within CRM and recently have set up the IPC.
The IPC communicates with the CRM Server without any issues. I have download all data required in the IPC.
When I create a new sales order in CRM all is ok apart from the conditions tab, this shows Pricing doc. does not exist. - Diagnosis
You tried to access pricing information. However, a valid pricing document is not available.
Any ideas?
System Details
CRM 4.0
IPC 4.0 SP16
Regards
Barry

Hi Barry,
Please check first whether a pricing procrdure is correctly defined under Spro->CustomerRelationship Management->Basic Functions -> Pricing ->Determine Pricing Procedures.
Here please check whether for the Sales Area(that you use in your order) an procing procedure is correctly defined. Otherewise pricing will not happen.
To explain about Customer Pricing Procedure and Document Pricing Procedure
The pricing procedure defined here in the above path is generaly a combination of 1)Document Procing procedure and 2)Customer Pricing Procedure.
Document Pricing Procedure - This is assocaited with the transaction type. Goto the transaction type details in spro and there you will find the association.
Customer Pricing Procedure - This is associated with thh Business Partner. Select the BP(in sold to party role) and select "Sales Area" tab and in the "Billing" tab you will find this information.
Note that the pricing procedure need not have both the Document Pricing Procedure and Customer Pricing Procedure defined.Any one can also be present. It depends on the business requirement.
In your case can you please check whether the Pricing Procedure is prsent at all.
Regards,
Abishek

Similar Messages

Business Partner Does Not Exist in CRM

Hi,
Please help. We cannot clear a bdoc error because of a business partner that does not exist in CRM. When we check it in ECC, it is existing. We tried to request load for that bp but same problem persist.

Hi Robert,
Thanks for your reply.
I already tried this before and tried it again today but still the bp does not exist in crm. Any other suggestion?

Error "Item 000010 does not exist" while creating sales order in VA01

Dear All,
As per customer requirement we are trying to validate shipping data( item level) and unloading point( item level) by customer enhancement.
Enhancement:       V45A0003
Function Module:    EXIT_SAPMV45A_003
INCLUDE:                ZXVVAU05
Inside include we have written validation code that if user enters any wrong value for shipping data or unloading data
system will throw error message accordingly.
It is working fine and we are getting error message if wrong shipping data or unloading data is entered.
But after the error message is displayed if we try to save the sales order again system throws a STOP message as a POPUP
saying "Item 000010 does not exist".
Now,if we enter proper shipping data or unloading data and try to save the salesorder it is throwing error "Item 000010 does not exist"..
Please let me know your valuable input on this.
Regards
Arindam
Edited by: Arindam Ganguly on Mar 11, 2010 1:55 PM

It sounds like your error routine has prevented the insertion of the data in VBAP or XVBAP internal tables. Therefore, upon return to the screen and SAVE, SAP is examining the VBAP or XVBAP table, comparing to the 'I' index table probably, and finding that there is supposed to be an item 10, but it's not in the necessary table(s).    This may be resulting because your internal tables are now inconsistent.
Look at where your inserted error coding is occurring...you may want to move that to the SAVE_DOCUMENT_PREPARE routine in MV45AFZZ, so that everything will have been built, and a final check of the content will stop the sales order save until the data is corrected.
Edited by: Breakpoint on Mar 11, 2010 3:29 PM

Document does not exist (Message 06 619) in creation of PO

Hi All
Can any one help on this below issue:
The error is 'Document does not exist' on each item that was on that RFQ to wrong vendor.
That is because I sent them out on an RFQ with different vendor.
Now I wish to process and save the PO to correct vendor.
How do I get rid of those errors that do not allow me to save PO?
Thanks
Sada

issue resolved

Types Does not Exist Error in Function Module creation

Hi Guys
I am trying to replicate the functionality of the below program using a function module. However when I enter the following in the changing tab of the fn mod, I get error TYPE IT_VBRP does not exist.
Parameter name p_it_vbrp like it_vbrp
<removed by moderator>
Moderator message: please post only relevant code parts, your posts must contain less than 5000 characters to preserve readable formatting.
Edited by: Thomas Zloch on Sep 11, 2011 3:55 PM

Hi
The reference type of a parameter of the interace of function module has to be defined in dictionary, if you need to use a particular type, you need to create an your own custom type pool or try to looking for a type defined like yours,
For example if you need a table based on vbrp, you can use the table type TAB_VBRP
Max

Getting Message - Customer PINXX does not exist

Hi experts,
While creating a P.O. I am getting a message that "CUSTOMER PINXX DOES NOT EXIST (PLEASE CHANGE ENTRY IN PLANT INXX)
*Following is the message details:-
Customer PINXX does not exist (please change entry in plant INXX)
Message no. 06849
Diagnosis
The shipping data for stock transfer processing has not been correctly maintained in Customizing.
Either no customer number has been maintained for the receiving plant, or the specified customer number does not exist for the sales organization data that has been maintained in Customizing.
Procedure
Check your input.
If the problem cannot be resolved in this way, contact your system administrator.
The latter can make the missing settings using the Implementation Guide (IMG): Set up stock transport order*
Please provide Pointers

Please check if the customer code has been extended for the proper
Sales Org.
Distr. Channe
Division
Company Code
Also refer the FAQ note 498143 and check the customising accordingly
Please check you customizing in IMG for Purchasing:
Purchase Order
Set up Stock Transport Order
Define Shipping Data for Plants
Select details for plant
Here, the customer number related to plant is defined.
Probably this customer number is no longer a valid customer number.
You need to check whether the customer number has become inactivated
in SD or FI.
If so, you need to define another valid customer number for the plant

Sales Order Error Message 'Product does not exist in system'

Hi Gurus,
we recently upgraded from CRM 4 to 7.0. There is a ECC attached (which was also upgraded from 4.7 to 6.0 before).
Scenario: materials are replicatd from ECC to CRM. All mandatory customizing objects were initially loaded succesfully.
Because of the upgrade we already have "old" products in CRM. We requested a single product from ECC, the bdoc went through with green. The product can be found via commpr01 and also on database in comm_product. But when try to add the product to an sales order e.g. quotation, it gives the error message "product does not exist in the system.
We then tried to delete that product using the report com_product_delete_single. When entered the selection criteria for that report, we used the f4-valuehelp to enter the product. We found the product and then executed the report. But gives the message 'product not found'.
We also created a product for testing purposes directly in crm, but it shows the same behaviour in sales orders and for the deletion report.
Please help me with that issue. Your help will be highly appreciated!!!
Kind regards
Hannes

Solved with the help of SAP.
Keywords: COM_PRODUCT
COM_PRODUCT_GUID_GET_INTERNAL
CONVERSION_EXIT_PRID1_INPUT
CRM_ORDERADM_I 501
Relevant notes:
Note 1449146 - Dump While Creation IP via WebUI
Note 1445079 - Unable to add products to contract
The notes do not exactly described our issue but the code corrections were still relevent for us.

Sales order stock does not exist error during PGI

dear sir,
we have two plants 1010 and 1020,we are using variant configuration for our finished goods
we want to make the sales orders in 1010 plant and we manufacture the machine in 1020 plant.
so we want to dispatch machine from 1020 plant (shipping point),eventhough we make sale order in 1010 plant.
but while doing PGI ,system shows one error message "Sales order stock does not exist" message 184,area M7.
if we see in MMBE stock of finished good is available in 1020(made 412 E movement)
how to resolve this
thanks and regards
srinivas pai

There can be two reasons for these kind of error
- Your sales doc while creating this order & your item category is marked with special stock indicator as E and after this order is created you have not reserved stocks in your plant against this order. This reservation can be done in tcode MB1B movement type 412 E.
- Let say, if it is reserved then check the same in tcode MMBE stocks reserved for your sales order.
Otherwise reservation you may have done properly with correct movement types with special stock indicator E. But while creating the your sales order with item category may not have been marked with special stock indicator E. In this case even though the system has stocks reserved for that order and that order when comes for PGI system doesn't sense.
In either of the case, you have to again do the process.
Hope it can assist you.
Thanks & Regards
JP

CRM Upgrade from 7.0 to EhP1 Error - The requested resource does not exist

Hello All,
We have recently upgrade our pilot system in CRM from CRM 7.0 to Ehp1. The upgrade was successful.
However, when I login into the WebUI, I get an error message as follows:
404 Not Found
The requested resource does not exist
Details: Go to main page of this application
I got in touch with the Basis team and tried to activate some services through SICF that were deactivated because of the upgrade. But we still encounter the above error everytime I tried logging into WebUI.
I kindly request to provide some pointers towards the resolution of the same.
Thanks and regards,
VSK.

Hi,
please try to activate all SICF services under sap->bc->bsp.
If needed deactivate them and activate afterwards again to be sure all services are active.
Good luck
Kind regards
Manfred

Preview error message doc "can not be saved because it does not exist"

I have had a long standing problem with Preview. I know it is odd but around closing time every day, two of my computers both running 10.6.8 get error message when trying to save a new document. The document will be open on my screen and when I go to save it I get the error message that the file can not be saved because it does not exist. Some background that may be relevent:
The documents that I create all day long (for at least 6 years) are output from a 4D database. I generate a report from the db and it opens in Preview as a PDF file. All day long I have no issues with creating and saving these docs. Then around 4-4:30 when many people are getting ready to leave two of our computers (one iMac 3.06GHz Intel Core i3 and an older macMini) have this problem. All you have to do to fix it is quit Preview and regen the doc. Unfortunately we often lose a lot of work because of it. I've tried anticipating when it will happen and restart Preview before creating the new doc but that only works occasionally.
I suspect that it has something to do with people logging out (I am usually the last to leave) and perhaps some shared application is effected. Everyone does have their own copy of Preview and we all use separate 4D clients. I have searched the internet many times. I have found some similar problems that people have had with this error but not related to my own. Unfortunately both Preview and "the file can not be saved because it does not exist" are very general terms that bring up all kinds of unrelated things.
I was going to try to delete the Preview Prefs file and start again but I can not find a plist for preview or any other file that is clearly the prefs. Searched the internet for that too but did not find it.
Does anyone have any ideas on this odd problem?
Thanks for reading!
Susan

To answer your questions:
Are you loading them by using Preview>File>Open, double clicking, or dragging the file? None of the above. I am loading them through 4D. I generate a report on 4D and it opens in Preview.
When this happens can you Open another PDF from the same location? Yes, see details below.
Are you loading these PDFs from the Server or another Mac? From the server. The file is created by a 4D client that resides on my disk but the 4D server which it references is on another computer. I am still shared to that computer and my connection to 4D has not changed as far as I can tell.
I found today (details written in response to another question) that when this happens I can save the file to my own desktop but not to the server. It makes me think there may actually be something happening with my connection. I wonder does a server do any realigning (for lack of a better word) of connections as some connections are lost? While I had the document open (the one that I could not save to the server) I went to the server and opened a document that existed there. I saved the file back to the server with a different name. No problem, it worked just fine. Now I am really confused....
1) A PDF file generated by 4D that has not ever been saved to the server can not be saved to the server via Preview around the time that other people are disconnecting from the server and shutting down their computers for the day. Quitting Preview and regenning the document fixes the problem.
2) The same PDF file that can not be saved to the server can be saved to my own disk.
3) Other files that are already existing on the server can be saved with a different name to the server at the same time as a new document can not.
I wish I felt like I was getting closer to the answer...
Thanks for thinking about it.
Susan

Accounting document created but the reference billing doc does not exist

Hi All,
We run a custom to program that generate a list accounting docs for clearing.
Now our problem is that the reference billing doc of the accounting docs does not exist.
It wasn't also archived.
The accountings docs are very recent so it is really impossible that it was deleted from the system.
We suspect that the accounting doc was created into the database while the billing doc wasn't.
Plus the issue is intermittent.
Please advise how we could fix this issue.
Any suggestion will really be appreciated.
Tnx.

Hi Prashant,
It sounds strange that same inspection lot has been made UD twice. Possibly he might have done for different Inspection Lots. While checking tables if you are querying by Inspection lot, do not do that.
Another thing to understand is when UD made successfully for 105 Qty, why this is not appearing in UnRestricted stock. Some communication gap is there.
As a last resort, you may need to cancel the UD by using program RQEVAC50 through SE38. And cancel the documents through MBST
Jogeswara Rao K

Sales order stock does not exist Message no. M7184

Hello Gurus,
I am getting this error while creating post goods issue.
"Sales order stock 1000000276 000010 does not exist Message no. M7184"
When i do MMBE it shows :
Finished Store 2300 Unrestricted use 2000
We are using MTO and in MRP 3 we have strategy group 20.
What i suppose to do in order to do PGI without any issue. Means SO -> Delivery ->PGI
Regards

HI
check your process that means for MTO cases Stock will be assigned to sale order line item so try to assign the stock to sale order line item
Assign stock to Sale order line item :
Go to MB1B , use movement type 411 and special stock indicator E , enter plant and Storage location and assign the stock to that Sale order and line item number
Check and Revert
Regards,
Prasanna

CRM R12.0.6 Map Type does not exist in the value set

Hi Everyone
When attempting to access Service Request Types in our CRM UAT Release 12.0.6 environment an error message appears referring to 'Value General for the flexfield segment does not exist in the value set'.
Checked the flexfields for the value set but did not set up a value for MAP_TYPES
Checked our PROD environment but no value set up as above.
Currently in progress of mapping service requests to responsibilites in UAT, could this be the cause and how to resolve? No mapping as yet for service requests set up in PROD. Has anyone else experienced this?
Thanks very much, Louise

Hi IWolbers,
>>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
this has also happened during normal debbuging of running code on my machine.
So you mean that it worked well before, am I right?
If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
https://msdn.microsoft.com/en-us/library/ms241278.aspx
To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
>>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
In addition, do you check other debugger window like local or others?
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

\OPatch\docs\etc\config\inventory" does not exist.

Dear One,
I have up-graded my Database 11.2.0.1 to 11.2.0.3.while applying the OPatch below error is coming...
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = F:\app\Administrator\product\11.2.0\dbhome_2\OPatch
Details = PatchObject constructor: Input file "F:\app\Administrator\product\11
.2.0\dbhome_2\OPatch\etc\config\actions" or "F:\app\Administrator\product\11.2.0
\dbhome_2\OPatch\etc\config\inventory" does not exist.
ApplySession::process() cannot load PatchObject: PatchObject constructor: Input
file "F:\app\Administrator\product\11.2.0\dbhome_2\OPatch\etc\config\actions" or
"F:\app\Administrator\product\11.2.0\dbhome_2\OPatch\etc\config\inventory" does
not exist.
OPatch failed: PatchObject constructor: Input file "F:\app\Administrator\product
\11.2.0\dbhome_2\OPatch\etc\config\actions" or "F:\app\Administrator\product\11.
2.0\dbhome_2\OPatch\etc\config\inventory" does not exist.
Locker::release()
Log file location: F:\app\Administrator\product\11.2.0\dbhome_2\cfgtoollogs\opat
ch\opatch2013-01-19_14-56-18PM_1.log
Cleaning up the directory : "F:\app\Administrator\product\11.2.0\dbhome_2\.patch
_storage\patch_unzip"...
OPatch failed with error code = 73
So,pls suggest me anyone how can i proceed the OPatch apply.........

you don't use optach to upgrade your database , Please Read the below Document That describe usage of Optach
http://docs.oracle.com/cd/B19306_01/em.102/b16227/oui8_opatch.htm
You Must have patch Number : 10404530 which can be downloaded from https://support.oracle.com
Similar thread
Upgrade 11.2.0.1 to 11.2.0.3

Sales order stock does not exists

Dear All:
I have created a sales order with reference to a quotation. the line item in sales order is also with reference to the quotation. and the stock has been assigned to that quotation. But while creating delivery, it is giving the error that sales order stock does not exist. my query is why sales order stock is required when the article is with reference to a quotation?? should not the stock be with reference to quotation??

Hi,
Check the Item Category of the Sales order which your using to create the delivery.In the item category confuguration VOV7 the special stock indicator 'E' may be assigned.So without a sales order stock assignement it will not allow you to create a delivery.
GO to Mb1b for the Sales order using 412 E create a stock and see whether the delivery is created or not.If it is creating than that means the sales order stock has to be generated through your process.
If production order confirms then it may generate a sales order stock in MTO scenario.If in your case it has to generated then you have to use MB1B trnasactio code or create your own customized program to create the sales order stock.
Regards,
Saju.s

Pricing doc. does not exist in CRM Sales Doc Creation

Similar Messages

Maybe you are looking for