Pricing Error- Condition type not found.

Hi Gurus,
I have a issue with pricing.
Scenario :
For a pricing procedure i have 3 condition types ;
For example :
ZXED, ZXE1 & ZXE2.
Of these ZXED is Manual, Mandatory & Statistical in nature.
ZXE1 & ZXE2 are Manual.
When i create a sales order my pricing procedure is getting determined correctly.
The issue comes in when i try to key in the values at the item level condition in the sales order:
If i see the options(F4) available for me to select the condition types i get have see only one condition type i.e ZXE1. but esentially i should get to see all the 3 condition types as an choice of code(condition type).
Can any one help me to find out the possible reason why i get to have only one condition type for selection.
Your suggestion is highly appreciable.
Rgd
VIVEK.

Hi,
1. Understand onething that a particular condition type if maintained "mandatory" in the pricing procedure then you will have to create the condition record for it using transaction code "VK11". If it is manual then you can give the rate directly in the sales order after selecting it. Since you have maintained "manual", "mandatory" & "statistical" for the condition type "ZXED" at the same time that is why the system is giving you the error "Pricing error" Mandatory condition ZXED is missing."
2. Also you want the system to show you all threee condition types "ZXED', "ZXE1", "ZXE2" to choose manually as per your requirement. Do one thing go to transaction code "V/06" - select the required condition type say "ZXED" - double click on it - in the "changes which can be made" section you will see a field for "Manual entries" - in this select "no limitations" and save the condition type. Similarly do it for the other 2 condition types and save it.
I tell you you must have maintained there "D-not possible to process manually". If this is maintained then the system will never show you the condition type to choose from the condition type list in the sales order.
Note: You have maintained for "ZXED" manual/mandatory/statistical. Now as it is mandatory also you have to maintain the condition record for it in "VK11". Now if you change the rate of this condition type in the sales order then when you will create the invoice in "VF01" the system will show that value only which has been maintained using "VK11" because in billing also the system fetches the condition record from VK11 for the mandatory conditions.
Hope this clarifies and solves your doubt.
Reward points if solution helps.
Regards,
Allabaqsh G. Patil

Similar Messages

Dotfuscator CE error: External type not found System.Windows.Input.ICommand,PresentationCore

Preemptive will not support CE so I am trying here...
I have an application targeting the .NET Framework 4.0. It builds and runs fine but I cannot get it to compile in Dotfuscator CE. I am stuck.
Dotfuscator CE (v5.0.2500.0) with Visual Studio 2010 SP1. Here is the Error:
Resolving method references...
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Build Error.
The problem seems to originate from ICommand being moved from PresentationCore.dll (in NET 4.0) to System.dll (in NET 4.5). Studio handles this and compiles fine as I am targeting NET 4.0 and the references all point to
C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0\
Dotfuscator CE however does not seem to handle it correctly and I am not sure how to correct the issue. Any help would be greatly appreciated!!

Hi Perter,
Thanks for your response.
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Maybe it is related to the references in your project.
Reference:
The type 'System.Windows.Input.ICommand' exists in both 'PresentationCore.dll' and 'System.dll'
Since it is not the VS General issue, I am moving your question to the moderator forum ("Where is the forum for..?").
The owner of the forum will direct you to a right forum. Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Pricing error : condition k005 not allowed ...

hello
i had encountered an error while doing pricing. the details are as follows:
after completing entire process of pricing procedure step by step, when i had attempted to create a sales order based on the condition given, i got the exact results for PR00 and K004 condition types but calculations for k005 customer material discount did not appeared and after attempting to give a conditions in the conditions section of va01 ,
i had encountered an error saying :
" condition k005 is not allowed as a header condition"
please send adequate replies..
amar

You are trying to enter the condition type manually at the header level I believe. Thats the reason why the system is giving you that error.
Go to the item level meaning double click on any material that you entered in the sales order and go to the "conditions" tab and enter K005, the system will take it.
OR
Go to your pricing Procedure in T.Code:V/08 and to the condition type K005 and uncheck "Manual", it is manual entry there, that why it is not appearing like K004 and PR00.
Regards
AK
Reward points if helpful

Pricing: New condition type not getting listed in options in product master

Hi,
I have created a new pricing procedure and also created a new condition type for it. I am trying to create a condition record in the product master for this condition type but the condition is not there in the list of conditions. How can I inlcude it in the condition list?
Even the new condition type I have created by copying 0PR0 is not getting listed in the options, whereas 0PR0 is getting listed.
Regards,
Meenakshi
Edited by: Meenakshi Sawhney on Sep 9, 2010 8:27 AM
Edited by: Meenakshi Sawhney on Sep 9, 2010 8:29 AM

Hi Meenakshi,
you need to enhance the condition maintenance group in the customizing, which is assigned to the product master. Please check: IMG: Customer Relationship Management -> Master Data -> Products -> Special Settings for Sales Operations -> Assign Condition Group to Application CRM and IMG: Customer Relationship Management -> Master Data -> Conditions and Condition Technique -> Condition Technique: Basics -> Create Maintenance Group.
Best Regards,
Michael

HM00 -Condition type not present in pricing procedure.

I have included HM00 as manual condition type in pricing procedure attached to the sales order through prcing procedure detrmination. But in sales order when I am entering the value manually for HM00, the error is "HM00 -Condition type not present in pricing procedure", but actually it is present in pricing procedure.
Any idea how to fix thie problem ?

Hi Sunil,
Just check in V/08 > YOUR pricing procedure and see if HM00 is included in it or not.
Hope this will definitely solve your issue
Reward suitably
Regards
SD

IDoc error - Condition type & tax code & does not exist

Hi,
I have the problem with CANADA tax codes. I have a few documents sent from external SAP to different SAP. In the source system documents were posted. In the target system i have error "Condition type & tax code & does not exist". I have compared the tables A003 and A053 in both systems and the settings are the same for specific Condition type and tax code... So where to find the reason Idocs are in error ? The only thing which is different is validity from (in the source system is earlier than in the target but the docs are created after both validation start)...
I would appreciate advice.
Tomek

Hi Tomasz,
Please go to T.code WE02 and check the reason for the error.
The failed IDocs will be in status "51" and will also give you the reason for errors.
Regards,
Shiv

Type not found error

Hi, my problem is "OCI-22303: type not found".
I have a package in a database, say, MY_PCKDG.aa_number
Then I'm trying
std::vector<int> var;
var.push_back(12);
setVector(stmt, index, var, "MY_PCKDG.AA_NUMBER"); //here it fails saying the type was not found
How to find the type? I have tried the type name alone, both uppercase and non-uppercase, and <package name>.<type name>, both all uppercase and non-uppercase.. Any suggestions?
--Andrew

Fernando . Thanks for the response. I am getting this error when I am trying to create a risk. Attached is the snapshot of the error. I have tried stuff like deleting the cache, checked SICF to see if Web Dyn Pro is active etc

CAUFVD gets initialized result in dump with error Production ord not found

Hi All,
We want to make change of start date and end date of a production order via CO02 (Production order change). Based on these changes we want to update an existing a Purchasing Planned Order Start Dt and Finsih Dt (MD12)
We are using Enhancement component (PPCO0007) : Exit when saving production order
Within this exit we are using BAPI_PALNNEDORDER_CHANGE to update some other purchasing planned order dates.
The BAPI_PALNNEDORDER_CHANGE is executing succesfully however the production order structure (CAUFVD) gets initialized resulting in dump with error Production order not found
How can we update and save a purchased planned order and also the production order
Barada
Edited by: barada satapathy on Dec 8, 2010 9:14 AM

Hi Max,
Thanks for the reply...
The error details are as below:
Dump gets generated via program : (SAPLCOBT).
Exception condition ORDER_NOT_FOUND raised.
include = LCOBPU16.
Row No: = 21.
Module Type = (Function)
Module Name = CO_BT_ORDER_DET_TEMP
We also give brief details on what is happening:
My exit calls from Standard (LCOZVU01) :
CALL CUSTOMER-FUNCTION '001'
           EXPORTING
                header_imp = caufvd
           IMPORTING
                header_exp = caufvd_tmp
                no_update = answer.
*     Check if update of header necessary and allowed
      IF caufvd-aufnr EQ caufvd_tmp-aufnr AND
         caufvd       NE caufvd_tmp.
        PERFORM caufv_upd(saplcobh) USING caufvd_tmp.
      ENDIF
When BAPI for planned order is executed within the exit, the structure (caufvd) values are found refreshed. This structure is further updating the production order.

I want to add refworks grabit to my tool bar, when I try to install for firefox it won' t let me this is what I get: HTTP Error 404.3 - Not Found The page you a

this is the complete error I get. I just installed firefox so that I can use this feature and now it is useless.
Error Summary
HTTP Error 404.3 - Not Found
The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map.
Detailed Error Information
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032
Requested URL http://www.refworks.com:80/refgrabit/install.xpi
Physical Path E:\RefGrabIt\install.xpi
Logon Method Anonymous
Logon User Anonymous
Failed Request Tracing Log Directory C:\inetpub\logs\FailedReqLogFiles
Most likely causes:
It is possible that a handler mapping is missing. By default, the static file handler processes all content.
The feature you are trying to use may not be installed.
The appropriate MIME map is not enabled for the Web site or application. (Warning: Do not create a MIME map for content that users should not download, such as .ASPX pages or .config files.)
If ASP.NET is not installed.
Things you can try:
In system.webServer/handlers:
Ensure that the expected handler for the current page is mapped.
Pay extra attention to preconditions (for example, runtimeVersion, pipelineMode, bitness) and compare them to the settings for your application pool.
Pay extra attention to typographical errors in the expected handler line.
Please verify that the feature you are trying to use is installed.
Verify that the MIME map is enabled or add the MIME map for the Web site using the command-line tool appcmd.exe.
To set a MIME type, use the following syntax: %SystemRoot%\windows\system32\inetsrv\appcmd set config /section:staticContent /+[fileExtension='string',mimeType='string']
The variable fileExtension string is the file name extension and the variable mimeType string is the file type description.
For example, to add a MIME map for a file which has the extension ".xyz": appcmd set config /section:staticContent /+[fileExtension='.xyz',mimeType='text/plain']
Warning: Ensure that this MIME mapping is needed for your Web server before adding it to the list. Configuration files such as .CONFIG or dynamic scripting pages such as .ASP or .ASPX, should not be downloaded directly and should always be processed through a handler. Other files such as database files or those used to store configuration, like .XML or .MDF, are sometimes used to store configuration information. Determine if clients can download these file types before enabling them.
Install ASP.NET.
Create a tracing rule to track failed requests for this HTTP status code. For more information about creating a tracing rule for failed requests, click here.
Links and More Information This error occurs when the file extension of the requested URL is for a MIME type that is not configured on the server. You can add a MIME type for the file extension for files that are not dynamic scripting pages, database, or configuration files. Process those file types using a handler. You should not allows direct downloads of dynamic scripting pages, database or configuration files.
View more information »

That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

Itunes install error message - program not found ...x64/difxinst64.exe

itunes install error message - program not found ...x64/difxinst64.exe
no problems with ITunes on Dell Inspiron Windows 7 until yesterday. ITunes version 11.0.2. iphone won't connect stating required software is not installed. uninstall and install 64 bit version of iTunes. I have 64 bit version already. I have uninstalled and reinstalled 5 times already. When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe. file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel. iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again. therefore, I can't sync my iphone with iTunes until I figure this out.
can't win for losing. had iTunes on my windows 7 laptop for 4 years. first time I've ever encountered this.

I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
[code]
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.exe]
@="exefile"
"Content Type"="application/x-msdownload"
[HKEY_CLASSES_ROOT\.exe\PersistentHandler]
@="{098f2470-bae0-11cd-b579-08002b30bfeb}"
[/code]
Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

VA00 condition type not getting determined for the returns order

Hi All,
I have a case where VA00 condition type not getting determined for the returns order that has been created with respect to the billing document.
When the pricing conditions are being copied from invoice it is getting copied but later it is getting deleted in the include LV61AA42.
Note:VA00 condition type is getting deleted from the internal table tkomv[].
If any one came across this scenario can you please help me.
Request your valuable inputs

Hi,
Please check the copy control setting in VTAA.
Maintain the pricing type as "D" at item category level for the respective document type .
Hope this will resolve your issue.
Regards,
Krishna O

Error 15 file not found.

I was able to install arch linux on a 2 GB flash drive. But I cannot boot into arch linux from the grub menu. I greeted by a message like "error 15 file not found"
my menu.lst file looks like
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd1,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/9157e8a3-c1bd-499a-95fe-524cd9c07d0e ro
initrd /initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd1,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/9157e8a3-c1bd-499a-95fe-524cd9c07d0e ro
initrd /initramfs-linux-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
/etc/fstab file looks like
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
#UUID=15eb5a8a-dddc-4b28-8183-f81d450b78d5 swap swap defaults 0 0
#UUID=9157e8a3-c1bd-499a-95fe-524cd9c07d0e / ext3 defaults 0 1
#UUID=aae9fb61-b5ec-40b5-a3dd-232c9a77f29b /boot ext2 defaults 0 1
#UUID=f1a9a9ad-8344-4eb5-be91-1af155c756e4 /home ext3 defaults 0 1
UUID=15eb5a8a-dddc-4b28-8183-f81d450b78d5 swap swap defaults 0 0
UUID=9157e8a3-c1bd-499a-95fe-524cd9c07d0e / ext3 defaults 0 1
UUID=aae9fb61-b5ec-40b5-a3dd-232c9a77f29b /boot ext2 defaults 0 1
UUID=f1a9a9ad-8344-4eb5-be91-1af155c756e4 /home ext3 defaults 0 1
and result of #blikd is
/dev/sda1: UUID="edc30674-5e24-46ae-865c-647b5af6a1ca" TYPE="ext4"
/dev/sda5: UUID="8045e664-17ad-4bfd-8b5e-56d7f17fbcdd" TYPE="swap"
/dev/sdb1: UUID="aae9fb61-b5ec-40b5-a3dd-232c9a77f29b" TYPE="ext2"
/dev/sdb2: UUID="15eb5a8a-dddc-4b28-8183-f81d450b78d5" TYPE="swap"
/dev/sdb3: UUID="9157e8a3-c1bd-499a-95fe-524cd9c07d0e" TYPE="ext3"
/dev/sdb4: UUID="f1a9a9ad-8344-4eb5-be91-1af155c756e4" TYPE="ext3"

Here is the result of my fdisk -l /dev/sdb
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 100 102384 83 Linux
/dev/sdb2 101 356 262144 82 Linux swap / Solaris
/dev/sdb3 357 1533 1205248 83 Linux
/dev/sdb4 1534 1926 402432 83 Linux
Last edited by manish411 (2012-01-14 05:24:14)

Error Interface Mapping Not found..

Hi Friends,
I am simply using file to ABAP proxy scenario.
I am getting error as : This I am getting while test my configuration at Scenario level Tools - > Test Configuration..
Interface Mapping :
Runtime error
com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MM_Source_Target_Proxy_: Parsing an empty source. Root element expected!
Plz help.
Regard
Deepak Sodhi

Hi Rajesh,
I am keeping the file as it is from Meassage mapping SRC File..
Message Mapping is giving me no error..
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source_Proxy xmlns:ns0="https://tcsfenest/test">
 <EmpId>315143</EmpId>
 <EmpName>Deepak Sodhi</EmpName>
 <EmpOffc>Gurgaon</EmpOffc>
</ns0:MT_Source_Proxy>
Only at the time of Testing configuration Environment -> Test Scenario.
Its giving me error Interface mapping not found.. My strucuture is flat.
DT - Complex type
Empid element string
Empname element string
Empoffc element string
Please help to resolove this issue.
Regards
depak

Error: Sender agreement not found, lookup of binding via CPA-CACHE failed.

Hi,
I am doing an RFC to File Scenario in which RFC has to be triggered from CRM system. The TCP/IP connection and communication Channel are working fine. But when i trigger my RFC using the RFC destination following errors occur:
1. The SYSTEM_FALIURE exception comes on CRM side.
2. In adapter monitoring the following error comes on XI side:
Error: Sender agreement not found, lookup of binding via CPA-CACHE failed for Adapter type RFC.
I have also tried the scenario with RFC request as source message and also after J2EE cache refresh but the problem still persists. And one more thing my file adapter (In receiver communication channel) is not working means it is not started. And no message is coming in SXMB_MONI.
Could anyone please help me to resolve this issue.
Regards,
Vinay Yadav

Hi Aaron,
I had the same error and your feedback solved my problem!
Thank you sooo much!!!!
Luciana

Solaris 10 boot error 15 file not found

During a reboot to one of our solaris 10 servers when it reboots it comes up with this error message
Findroot (pool_rpool,0,a)
     Filesystem type is zfs, partition type 0xbf
kernel$ /platform/i86pc/multiboot -B $ZFS-BOOTFS
loading '/platform/i86pc/multiboot -B $ZFS-BootFS' ....
Error 15: File not found
press any key to continue...
The grub file menu.lst content is as follows
#pragma ident   "@(#)menu.lst   1.2     10/06/11 SMI"
default 0
timeout 10
# Uncomment the following line to enable GRUB splashimage on console
splashimage /boot/grub/splash.xpm.gz
#---------- ADDED BY BOOTADM - DO NOT EDIT ----------
title Oracle Solaris 10 1/13 s10x_u11wos_24a X86
findroot (pool_rpool,0,a)
kernel$ /platform/i86pc/multiboot -B $ZFS-BOOTFS
module /platform/i86pc/boot_archive
#---------------------END BOOTADM--------------------
#---------- ADDED BY BOOTADM - DO NOT EDIT ----------
title Solaris failsafe
findroot (pool_rpool,0,a)
kernel /boot/multiboot -s
module /boot/amd64/x86.miniroot-safe
#---------------------END BOOTADM--------------------
During a shell session using a recovery disk i mount the rpool to /a , if I do a zpool status it comes back that rpool mirror-0 with both disks are online
rpool          ONLINE
mirror-0      ONLINE
c0t0d0s0      ONLINE
c0t1d0s0      ONLINE
However if I do a zpool import it shows
rpool          UNAVAIL     insufficient replicas
mirror-0     UNAVAIL     insufficient replicas
     c0t0d0s0 FAULTED   corrupted data
     c0t1d0s8 UNAVAIL    corrupted data
This is highly confusing
Any help would be much appreciated

What's confusing to me is that the second disk in this mirrored root pool shows c0t1d0s0 in one output and c0t1d0s8 is another output. I hope this is a typo. Otherwise, you need to find out why this device path changed. Its look like the primary disk is faulted. FMA will tell you if the disk is faulted and whether the second disk's device path changed. You will have to boot from media or an install server.
Thanks, Cindy

Pricing Error- Condition type not found.

Similar Messages

Maybe you are looking for