Pricing ..Very Critical....How to Map

Hey SAP Gurus...
Could you all tell me how to configure the below requirement ...plz provide me the solution precisely..its critical need to resolve asap...plz help meeeeeeeeeeee....
Thanks in advance....Heres the requirement....
The Client has gone for a single window sale with a ABC company (Vendor), where the vendor has around 1000 distributors under it. Client has around 100 distributors, whom Client would be put under the Vendor. All the sales activity from the Client side will be ONLY with the Vendor and the distributors have to buy from the Vendor. But the marketing part is with the Client.
Itu2019s a 45 days direct sale with the Vendor at 60% of MRP.
Client sets the rate of the Products to be sold at different zones (South, North, West, and East) or for a particular distributor.
Ex: North zone: 80% on MRP
South Zone: 75% on MRP
The Vendor gets 5.5% on the Net sales (minus tax)
Ex: MRP = 100/-,
Vendor Price = 60/-
Distributor Price (DP) = 80/-,
Tax = 10/-,
DP minus Tax = 80-10 = 70/-
Net Sales = 70/-
Already paid = 60/-
To be paid = 10/-
Vendors service charges = 5.5% of 70 = 3.85/- (say at 12.5%tax)
Balance payment = 80 u2013 60 u2013 10 u2013 3.85 = 6.15/-
The balance payment is reconciled every month end. So that credit/ debit notes are raised and adjusted against next payments.
*My question:*
*How to map this in SAP (upload in standard tables) so that reports are generated as per needs?*
Edited by: shrii on May 21, 2009 9:28 PM
Edited by: shrii on May 21, 2009 10:32 PM
Edited by: shrii on May 22, 2009 9:29 AM

Message is duplicated with
Pricing....how to map ??
Please close it. Thanks in advance.

Similar Messages

Very Critical....Barcode Configuration..Plz Help....

Hi SAP Gurus....
Could you all plz help me to map in SAP..MM..Its very critical need to provide solution to my client ASAP
1.     Client procures two types of products from ABC Dubai namely, A and B products.
2.     The products under warranty are being tracked using Barcodes.
The barcodes are generated at the client place with the Purchase Order and sent to the Vendor by Post or through E-mail.
3.     Barcodes have to be printed in the case of Post, or converted into .PRN file in the case of an E-mail
4.     These barcodes are then pasted on the products as required and shipped back to the Client.
5.     Barcode used currently is EAN 14, code 128.
6.     Client has different Handling Units (HU), like Outer, Inners (smaller carton inside Master carton), and items inside Inner carton. All the three HU has different barcode series. Inners have Master carton number of Pieces have respective Inner carton numbers.
7.     At the time of GR, Masters are scanned, and details up to pieces are collected into system automatically.
8.     All goods movement happens then with barcodes.
Could you all plz tell me how to create the below details....respective of above requirements....
u2022     Question - -
      How to Create Barcodes
Edited by: shrii on May 22, 2009 9:31 AM

Map the procurement with inbound delivery so that handling units will be captured and barcodes can be sent to the vendor with the help of data from inbound delivery. For barcode printing, follow: http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Hope, this will help you.
Regards,
Sudhir Dahake

How to map business process and enterprise service?

Recently, I read some documents about ESA. I'm confusing about the relationship between business process and enterprise service. In other word, how to map the business process to enterprise service after the business process is analyzed? Is there any methodology/rule to define business process and wrap them into service in ESA?

Hi Sherry,
I like to add some of my thoughts about that discussion. From my point of view ESA is much more than just another BPM or Enterprise BPM. ESA is adresses six key areas and I think all of them are really needed:
- People Productivity as the word itself describes...it's about portals and productivity.
- Embedded Analytics has to integrate transactional and analytical content.
- Service Composition is used for model-driven service composition and services orchestration.
- Service Enablement is about a Enterprise Services Repository filled with business meaningful Enterprise Services and service patterns for enabled objects. Excactly this is where SAP has years of experiences.
- Business Process Platform is about service enablement of all application platform objects and engines. This is the place where "BPM" for core business processes resits.
- Life-Cycle Management has to cover the deployment, configuration, operation and change management for ESA based processes.
Therefore the term "BPM" is located in serveral layers of an ESA approach. On the level of Business Process Platform BPM is providing the choreography for core business preocesses.
At Service Enablement BPM needs to compose out of granular services (I would say "atomic" services)
buiness meaningful services (here we have "molecular" services).
The third level where BPM could be used is Service Composition because exactly this is the place
where serveral Enterprise Services could be combined to a process representation.
To come back to the discussion:
1. The question should be how to indentify business meaningful services which could represent single process steps. ATP check, Credit card check, ... could be examples. In theory this service could be out-tasked, defined more flexible etc. This means that processes needs to be evaluated for Enterprise Service candidates. Afterwards you can check against SAP's Enterprise Services Repository for already existing Enterprise Services. The evalution for enterprise services candidates will be supported by the metodology mentioned by Kaj and David.
2. I think domains in this context should be motivated by business and/or functional areas. Depending on the granularity. For example Order Fulfilment Services, Master Data Services, Search Services... These kind of serices can be combined again to services such as "Search of Master Data" (Search Service + Read Master Data Service) etc. or can be used to generate UI to be used in a ESA application.
Your thoughts?
Very best regards
Wulff

How to map an object to its ID in a table?

Here is my situation:
class Foo {
private Bar bar;
}How to map the Bar object into a DB table column of its ID on the ORM mapping file?
Thanks very much in advance.

Never mind. I have solved this issue myself.
Message was edited by:
vwuvancouver

How to Map Fomulas for Float Glass Process

Hi All,
Can anybody suggest how to map formulas for float glass process.
As in float Glass process continuous production is going on single line, within that continuous ingredients are added in furnace and molten glass mass is coming out. this molten glass is now adjusted to particular thickness and then finally cut into specific sizes as per cusotmer requirment.
Final product is in various thickness, width and length.
Entire process is automated.
If anybody already implemented same scenario, please share knowledge.

Hi
The following is the mapping process and it is tricky process need to map carefully.
You can define this as a single formula.
Output: Packed - cut to size - Finished Good Item.
Input: All the Raw materials (Sand, Dolamite, Limestone, Soda Ash, Sodium Sulphate, Carbon, Iron Oxide)
Packaging materials + Labels + Boxes etc.
Define Routing:
Resource: Furnace, Any other importance resource like Equipment that controls thickness, cutter etc, Labor, Associated Overhead
Create recipe using the formula and routing.
Various factors that can affect the mapping:
1) Formula maintenance: You have to define formula for each output item.
2) Possibility of dynamic determination of output item: If it is possible to produce different combination of thickness/width (and hence different FG item) in the same batch, then this won't be the right mapping.
3) Process variations: Also formula mapping depends on how accurate is production process. If user wants to produce item X (say thickness 10mm) but due to quality issue produced item Y (say thickness 9mm) and such cases happens very often, this won't be right solution.
4) Inventory measurement: This will determine the break-points. If you cannot measure the quantity (or even estimate) then you cannot define it as an intermediate item.
I will explain how point 4 can lead to different way of formula mapping.
Say you have a furnace that needs to run continuously for better quality or throughput. Hence you will be continuously adding raw materials to furnace and produce different outputs. You can break the single formula into multiple formulas as -
Formula 1) Output: Molten mass of glass
Input: All the Raw materials (Sand, Dolamite, Limestone, Soda Ash, Sodium Sulphate, Carbon, Iron Oxide)
Formula 2) Output: Packed - cut to size - Finished Good Item.
Input: Molten mass of glass
To have formula in such fashion you should have a way to measure or estimate the weight of Molten mass of glass.
If you are estimating the weight, there should be historical data available to determine what should be realistic output quantity for given input quantity. How much will be process loss and loss due to unwanted by product such as slag etc.
Further you can break formula 2 as
Output: One large sheet of give thickness
Input: Molten mass of glass
Output: Packed - cut to size - Finished Good Item.
Input: The large sheet of give thickness.
This kind of different mapping is possible which normally depends on:
1) Complexity of process
2) How complex BOM structure user wants to have
3) Are there any benefits of maintaining such complex system - like accurate costing or accurate production monitoring or facilitating planning process.
4) Can user maintain the complex system? Are they ready to capture data at finer level. Is it possible to capture the data.
5) And most important thing is how to handle exceptions. If every thing goes smoothly as planned (less exceptions) then user can have and afford any level of complexity. But if there are many exceptions to the normal process you have to concentrate more on how to handle the exceptions.
6) Satisfy all users: Accounting, Planning, Production, Quality, Inventory handling. Formula/Recipe touches all these modules.
Regards
Raj
Sierra

How to map 2 tables together into a new one, like an Union?

Hi.
I am new in Oracle Data Warehouse Builder and what I'm wanting to do could be simple.
My question is: How to map 2 tables into a new one? That is, what I need is to do a Union.
See the following tables:
What I have is:
---------------+ ---------------+
| A | B | | A | B |
|--------------- |---------------
| 10 | 34 | | 13 | 39 |
---------------+ ---------------+
Table 1 Table 2
What I wish is:
---------------+ ----------------------+
| A | B | Original table |
|--------------- ----------------------+
| 10 | 34 | 1 |
|--------------- ----------------------+
| 13 | 39 | 2 |
|--------------- ----------------------+
Then, I need put all data together into a new table and this new table should has a new column showing the original source of data to each record.
Can I do such thing?
I'm using the Oracle Warehouse Builder and trying to do a map in this way.
Any hint will be very helpful. I also will appreciate an indication of some document which can show how to do it.
Thanks .
Rodrigo Pimenta.
Brazil.

Use the SET OPERATOR. That should help i guess.

How to map a query with the Multiprovider?

Hello All,
Can any one please tell me how to map a query with a multiprovider?
Appreciate your help.
Regards,
Soumya.

Hi,
Can you please elaborate , do you mean how to create a query with multiprovider. if that is your question it is very simple just create the query on the multiprovider.
What is the purpose for mapping the query with multiprovider

Download- my computer os was wiped and i need to reinstall my acrobat application. who can i actually talk to about this? i just spent 10 minutes on the automated phone cycle, which was very unsatisfying How to talk to an actual person?

my computer os was wiped and i need to reinstall my acrobat application. who can i actually talk to about this? i just spent 10 minutes on the automated phone cycle, which was very unsatisfying How to talk to an actual person?

while waiting for a phone number, if you need an installation file,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How to Map in SAP ?

Hi
My client is Automobile industry.In the presales process my company delivers the goods to the dealer.On transit the goods are damaged.Instead of returning the goods the dealer him self repairs the goods and sends the credit memo to the company.The company will send the engineer for inspection and give the clearance certificate for the dealer.With reference to this we have to create the credit the customer.
How to Map it SAP....?
Plz send me the reply
Regard's
Prasad.

Dear Prasad,
As you r not taking d goodS back (or dealer is not sending them back) thus it's not a case of a Returns. Also there is no issue with d invoice either thus even Invoice Corrrection Request will not b generated.
Thus it's a simple case of creating a Credit Memo Request for the required amount i.e the amount claimed 2 b spent by d dealer. This will obviously have a block which can b removed by d engineer who went for inspection (or some1else depending on d working of d organisation). Once the billing block is removed the dealer can b issued a Credit Memo in d usual way.
Hope it answers ur query.
regards
PARAM

How to map new field in DSO

I have added a new field to the dso and i have replicated the datasource as well which is showing the new field newly added in ecc. how can i map the new keyfigure in the transformation between the datasource and ods. its showin in the ds, can u pls tell me how to map now.

Ya but the problem is I have an infosource in between and its not showing in the transformation between the dso and infosource.....nor the infosource and the datasource. But its there in the first transformation on the dso side, not on the inforsource side..... but how to get that field in the infosource side...so that i can map the field between both the transformations....between infosoucre and dso and infosouce and ds.....You know what I mean. the zfield is showin in the dso field structure in the first level mapping between dso and infosouce....but where do i map it.
Edited by: Daniel on Nov 28, 2011 9:59 AM

How to Map the Unit field in case of DSO and INFOCUBE

Dear Experts,
I have a issue ,Please help me to solve this
I have DSO as provider ,
And, i have to map transformations btw the Datasource and DSO.
In generic Data source, i have unit fields like BASME,MEINS (Quantity units) & STWAE (currency field)
and normal Quantity fields like KWMNG,OAUME(quantity related),OAUWE (value related).
In DSO data fields as Key figure info objects like 0Quantity (which have 0Unit as unit of measure) and some other key figures which have there respective unit of measure in info object definition.
So you Please tell me how to map the Quantity ,Amounts, unit fields to key figures that we have.
(How it will be for both DSO and Info cube is there any difference?)
Edited by: AnjunathNaidu on Jan 18, 2012 1:20 PM

Navasamol ,
If it is works ,will u please tell me what is the difference ,if the transformations btw data source and DSO and
what is the difference btw data source and info cube and btw DSO to Infocube or cube to cube .
And i have seen the Quantity fields and there respective unit fields are mapped directly to key figure info object
in case of Info cube . Its working fine .
If only 1:1 mapping allowed in DSO data fields key figures and there respective unit of measure characteristic.
why this difference btw DSO and Info cube can any one explain me in detail.
Expecting your valuable suggestions.
Thanks & Regards,
Anjunath Naidu
Edited by: AnjunathNaidu on Jan 18, 2012 4:05 PM

How to map promotional items

Hi Experts,
how to map promotional items with sales employee wise.
and what is the difference bet sample and promotional items
Regards,
Amar

I have no idea abt your process, but you can create new order reason as promotional items and assign to FOC order, you can create sales employee as customer and create FOC with customers ( sales employee).

How to map lattitude and longitude on a map in j2me.

hi all,
i am new to this forum and new to j2me.
i am developing a pplication to track location of a gps mobile phone.
i am using wtk2.5.1 jsr179 to develop it
i know how to get location of a mobile phone but i cant find any method how to map those lat long coordinates on a map...
please help me out if anyone knows about it..
thanx

Hi,
I'm afraid that this is large problem... and it's not related to J2ME.
The first question is whether you want to use some map provider and its API or you have a bitmap and you want to place a cursor of your position in the map.
In the first case find an API to use (I don't know any). In the second case you have to understand what the GPS coordination mean, know projection type of the used map, then find and use the transformation formulas to transform GPS coordinates to map coordinates and vice versa.
Regarding the GPS coordinates start here: http://en.wikipedia.org/wiki/World_Geodetic_System
Regarding the projections - my map I tried to use in my application uses Lambert conic conformal projection http://en.wikipedia.org/wiki/Lambert_conformal_conic_projection
but it may differ from map to map.
Enjoy :-)
Rada

How to map free goods scenario

how to map free goods scenario?

Hi
Two types of free goods
1.with excise free sample goods
2.With out excise free sample goods
with out excise free sample goods
step1 create a purchase order and tick free goods column
step2 GRN against free goods Po
step3 No a/c entry Generated.
with excise free sample goods
step1 J1iex
step2. Part1 created
step3. Part11 created
rds
Kavi

How to map back charge process

Hello friends,
I need help to map below scenario in SAP:
We have third party business process, where vendor V1 is supplying material to customer. When customer receives material; V1 invoices us and we make payments to V1.At this point PO is closed for vendor V1.
Now if customer faces any problem with material, then we call local vendor V2 to repair or service the material. What ever charges come from local vendor is suppose to reimburse by vendor V1.
Now how can we link V2 vendor invoice amount to V1 invoice. What will be the document flow? How to map back charge process .
Note:
We have considered adding negative line items to the existing PO but understand this is not possible once payment has been issued and the PO is closed.
We have considered creating a u201Creverse sales orderu201D but do not want to create a separate order or handle the vendor under a separate sold-to account (as a customer)
We have considered a manual FI invoice but do not want to handle the vendor under a separate sold-to account (as a customer)
Seeking valuable inputs from experts.
Regards
Ravi

Hi Raghavendra
Yes V2 exist in SAP, right now we create new purchase order to V2 for services for material at customer location, after his service we do payment to V2 and same amount is charged to V1.
While charging V1 , we need to treat V1 as a customer( sold to party ) , which we donu2019t want , and direct clearing from FI is also not fusible as we again need to treat V1 as customer ( sold to party ) .
Our requirement is to map using some credit memo or debit memo or any other documents.
regards
Ravi

Pricing ..Very Critical....How to Map

Similar Messages

Maybe you are looking for