Prime LMS: HUM performance monitoring interface selection

Hi @all,
I am uisng Prime LMS 4.2.5. We want to monitor the performance of interfaces (in and out discards, utilization etc.)
Is it possible to select other interfaces than the "Link Ports"? I want to monitor some server ports.
I have created my own group, but this one cannot be selected in the threshold configuration.
Regards
Joerg

You can select the other ports/interfaces when while creating poller, you'll see following options :
Poll by Pattern  Select patterns on which you want to query devices and poll instances
Poll all Instances  Poll all instances of the selected template on the selected devices
Poll by User Selection  Select the instances on which you want to poll the devices
Select the Poll by user Selection to select the desired interfaces. It Polls the selected instances of the device. You cannot select this preference type for Device Groups and Port Groups data sources.
-Thanks
Vinod

Similar Messages

  • Cisco Prime LMS 4.1 - Monitoring events

    Dear all
    I have a problem to see the events in the Cisco Prime, for example when an event occurs (port-shutdown) in the switch I receive this information:
    Event Source
    DFM
    Description
    Cisco  Command Monitoring -> Event Command Source: Command Line, Event  Config Source: Running, Event Config Destination: Command Source
    Event Category
    Other
    Fault Last Updated At
    07-Mar-2013 16:57:40
    Event_Description
    InformAlarm
    Component
    192.168.10.5: Cisco Configuration Management Trap
    I don't see the details of the port that was done, or other deatiled that give aditional information abut the event. I have configured the Cisco Prime in this way:
    - Admin > Network > Notification and Action Settings > Event Sets  :   I have marked all the events
    - Admin> Network > Notification and Action Settings>Fault - Email notification : My mail is configured , I received alarms by mail.
    - Admin> Network > Notification and Action Settings>Fault Notification Group  : is configured
    Notification                      Group Name:
    TestSW4
    Device List:
    192.168.10.7 ; 192.168.10.6 ; 192.168.10.5 ; 192.168.10.253 ;
    Event Set:
    All
    Event Severity:
    Critical ; Warning ; Informational ;
    Event Status:
    Active ;
    Customer Identification:
    The snmp was configured in the devices:
    snmp-server system-shutdown
    snmp-server enable traps
    snmp-server community <community> RW
    snmp-server host 192.168.10.x <community>
    PLease your support or give some information to configure correctly the events and failures in cisco prime in order to see correctly

    Hi,
    This community is for collaboration. Pls post your question in the following community:
    Home --> NetPro --> Network Infrastructure --> Network Management --> Discussions
    Thanks,

  • Internetwork performance Monitor (IPM) issue of CiscoWork LMS 2.5

    I’m implementing IPM 2.6 module on Ciscoworks. To analysis ICMP traffic from Source to Destination, I have made 1 IP Echo entery of source & target, where source is RouterA serial IP & Target is RouterB Serial IP. Now if Normal Ping happens from Router A to B. Traffic analysis & delay displays at IPM. Now I move one another entry where Source Router A & Destination Router C Serial IP. Now Problem begins. Due to some policies, Router A can’t make normal Ping to C but extended ping happens for same but IPM can’t capture extended ping traffic & delay. It always show Request timed out. Now I’m stuck. It’s very necessary to resolve. Waiting..

    Dan,
    IPM and LMS 3.2 are EOS/EOL. But the features are still available in the latest version of LMS, aka, Cisco prime LMS 4.2.
    Cisco Prime LMS 4.x onwards the module specific approach was re-structured to feature centric menu, and hence Cisco Prime LMS 4.2 has all the required + enhanced IPM features.
    You can upgrade to LMS 4.2, however, we encourage everyone to move to Cisco Prime Infrastructure, which is more future proof, as Marvin recommended.
    IPM feature in Cisco Prime LMS 4.2 is known as Performance Management.
    For more details check :
    Navigating Cisco Prime Internetwork Performance Monitor Tasks in LMS 4.2
    Performance Management
    Cisco Prime LMS 4.2 and Cisco Prime Infrastructure 2.2 Functional Comparison
    -Thanks
    Vinod
    **Encourage Contributors. RATE Them**

  • LMS 4.2 Performance Monitor

    Hi All.
    I have encountered an error while creating the new poller by selecting the interfacerror template.
    Is it the license limitation?? if license limitation how can i find out the current devices count in the performance monitor page ??
    Find the attached errors.
    Regds,
    Channa

    OK, your license appears to be in order.
    To check the number of devices under performance management, please see Admin > Dashboards > Device Status. You should see something like the screenshot below.
    If the count on the status display is less than your 100 device license you should be be able to create new pollers. If the count is under your license total and you still cannot create pollers, you may be seeing a bug and a TAC case is in order.

  • Cisco Prime LMS MPLS monitoring

    Hi all, have anyone used Cisco Prime LMS for MPLS xconnect monitoring?
    Currently when these traps arrive to Cisco Prime LMS they are classified as "InformAlarm Unidentified Trap Generic".
    Is it maybe possible to load the correct MIB for these traps and get Cisco Prime LMS to understand them correctly?
    The raw traps looks like this:
    xconnect down:
    09:58:42.352760 IP (tos 0x40, ttl 245, id 12, offset 0, flags [none], proto: UDP (17), length: 114) routerhost.51591 > lmshost.snmptrap: [udp sum ok]  { SNMPv1 { Trap(71)  E:cisco.10.106.2 10.130.1.13 enterpriseSpecific s=1 424011509 E:cisco.10.106.1.2.1.26.2=2 E:cisco.10.106.1.2.1.26.2=2 } }
    xconnect up:
    09:59:48.597894 IP (tos 0x40, ttl 245, id 14, offset 0, flags [none], proto: UDP (17), length: 114) routerhost.51591 > lmshost.snmptrap: [udp sum ok]  { SNMPv1 { Trap(71)  E:cisco.10.106.2 10.130.1.13 enterpriseSpecific s=2 424018144 E:cisco.10.106.1.2.1.26.2=1 E:cisco.10.106.1.2.1.26.2=1 } }
    I found some more info about the traps at:
    http://tools.cisco.com/Support/SNMP/do/BrowseMIB.do?local=en&step=2&mibName=CISCO-IETF-PW-MIB-V1SMI
    BR /Crille

    Here is an update:
    After discussing with TAC there seems to be 2 possible solutions in LMS right now:
    1. Create a threshold that monitors the specific OID for the xconnect vc and generate alarm if it changes.
    2. Configure the device to send syslog when a xconnect state changes and create an "automated syslog action".
    I have not tried either of them yet so I dont know which one works best, but option 2 seems easiest (its a one time config).

  • Performance Notification Message Customization in Cisco Prime LMS 4.2.4

    Greetings,
    I'm attempting to deploy Prime LMS 4.2.4, and one of the features I would like to use is performance threshold notifications.  However, the email notifications are bloated with information, and I'm unable to find a way to customize them, unlike the fault notifications.
    I'm hoping someone will be able to point me toward what I've missed, and I thank you for your time and consideration.
    Regards,
    Rob

    Hi Mantej:
    Thanks to your link and I have downloaded the Prime LMS 4.2 document.
    I then read and installed the JRE first in 64 bits because my Windows OS is 64bits but it still prompts out the Java installation screen. I then installed the JRE in 32 bits.
    After that, it has no more Java installation screen. It then request for downloading file at the Windows top bar. I follow the request to riight click to allow the downloading. The Java running and downlaod the file.
    After that, I cannot see any difference. Meaning I still cannot access anything for Toplology Services to draw my network topology diagram.
    May I know what should be happen and what is the next step to do the topology drawing?
    Many thanks!
    Regards,
    tangsuan

  • Monitoring Dashboard - Syslog Alerts portlet (Prime LMS appliance)

    We are using the Prime LMS appliance and have upgraded to 4.2.3.
    Nothing is showing in the Syslog Alerts portlet on the Monitoring Dashboard.
    If I click on the portlet title I go to the 24 Hour Syslog Report page.
    This page has the standard settings and is set to run the report every 24 hours.
    If I run it immediately, I get a nice long report of syslogs.
    Nothing show in the portlet though.
    I do not think DNS is populated with the device names & ip addresses (unsure how important this is).
    Currently using the sysname (from SNMP) for device naming.
    Any help much appreciated.
    Mark.

  • Error installing Oracle Counters for Windows Performance Monitor

    Hello,
    I have installed Oracle EE 11g 11.2.0.1.0 on a Windows 2008 R2 server. Now, I am using the Oracle Universal Installer to install the Oracle Counters for Windows Performance Monitor 11.2.0.1.0
    Source path is D:\Share\11gR2_win32_11gR2_database_install\database\stage\products.xml
    Installation Type is Custom
    Install Location is C:\app\dmadmin
    Path is C:\app\dmadmin\OraHome_1
    I de-select all product components and select the following two:
    Oracle Windows Interfaces 11.2.0.1.0
    Oracle Counters for Windows Performance Monitor 11.2.0.1.0
    I get the following error:
    OUI-10150:Error: A runtime exception occurred while setting s_digCfgNamingLabelSIDnull in component Database 11g 11.2.0.1.0 . Installation cannot continue for this component.
    I am given the choice of Stop installation of all products and Stop installation of this component only which both result in non-installation of selected component.
    Does anyone have any advice or solutions for this error? I have tried re-booting the server, but get the same error.
    Thanks for your assistance,
    Stumped

    OUI from ORACLE_HOME (OH\oui\bin\setup.exe) cannot be used to install components from 11.2.0.1 installation media (products.xml)
    This is documented, but I am not able to locate it now.
    Have you checked if the Performance Monitor files are already installed or not?
    Thanks
    Srinivas

  • Internetwork Performance Monitor

    Hello Friends,
    In LMS 4.0 Internetwork Performance monitor, when i try to configure collector configuration, in source devices only 2 switches are available i.e 6500 and 3560 but in Target devices i m able to see 32 devices what i have discovered in DCR,
    Why that so,can anybody help me to understand such issue.
    Thanks

    Hello Dears,
    Manually Importing DCR Devices.
    You can manually add devices to IPM by deselecting the Enable Auto Mode option and select the Apply button in the Internetwork Performance Monitor > Admin > Auto Allocation Settings page. Then go to Internetwork Performance Monitor > Collector Management > Devices and click Add Devices.
    I m using LMS 4.0, the path above is not same in LMS 4.0 there is no Add devices tab to add devices manually but there is a Add Adhoc devices Tab which i can use to add devices manually??
    when there is enable auto mode then why these devices are not imported in IPM automatically, Devices are imported by RME,CM,and also in DFM,but why not in IPM.As per the attachement in previous mail how come these 2 devices were imported in IPM.

  • Cisco Prime LMS 4.1 course needed

    Hi folks,
    In near future we're going to migrate our LMS 3.2 to new LMS 4.1.
    Have anybody know if any Cisco courses for Cisco Prime LMS 4.1 are available to buy, order or download? If so, wher I can find it.
    Thanks in advance for help

    If your employer is willing to let you travel to instructor-led classes, you could search for providers of the 5-day "Implementing CiscoWorks LMS 4.0". Here's a course outline of this class, from the intraweb:
    1. Introduction to CiscoWorks LMS 4.0
    Defining Network Management
    Exploring the Network Management Process
    Basics of CiscoWorks LMS 4.0
    2. Getting Started
    Installing CiscoWorks LMS 4.0
    Logging into CiscoWorks LMS 4.0
    Using the Getting Started Workflow
    3. My Menu
    Basics of My Menu
    Managing Dashboards, Portlets, and Portal Layout
    4. Inventory Management
    Collecting Inventory and End User Information
    Performing Device Administration
    Viewing and Creating Inventory, User Tracking, and Switch Port Reports
    Using Inventory Tools
    5. Configuration and Software Management
    Managing the Configuration Archive
    Verifying Configuration Compliance
    Using Configuration Tools
    Using Configuration Workflows
    6. Network Monitoring and Troubleshooting
    Visualizing the Network with Topology Services
    Monitoring Network Performance
    Monitoring Network Response Time
    Monitoring Syslog Messages
    Monitoring Network Faults
    Using Troubleshooting Tools
    7. CiscoWorks LMS Work Center
    Using Smart Install Work Center
    Using Identity Work Center
    Using Auto Smartports Work Center
    Using EnergyWise Work Center
    8. CiscoWorks LMS Administration
    Using the Trust Management Menu
    Managing Collection Settings
    Performing Network Administration Tasks
    Performing System Administration Tasks

  • Prime Infrastructure - alerting only trunk interfaces?

    a very important NMS customization option is to decide which interfaces are important and which not for alerting...
    How is this possible in PI?
    I want to differentiate between important uplink ports and e.g. unimportant client ports - and as a consequence receive no emails for unimportant interfaces.
    In LMS this was possible via Bluk jobs disabling monitoring for certain interfaces.
    Is this possible in PI?
    Thanks in advance!
    BR.herwig

    Thanks Rob for your prompt answer
    I wonder how the "Port Group" Feature plays into the Alarming Part of PI.
    What if I disable "Auto Monitoring" and create(design) port groups containing only important uplink ports...
    Now if I receive a Interface down Trap from a Switch client port,
    does PI still trigger an alert, despit I previously disabled "Auto Monitoring" in System Prefs?
    Or in other words: Are Port Groups only used for performance monitoring or also used for alert notification?

  • What's the replacement of CiscoWorks Internetwork Performance Monitor (IPM)?

    Hi There
    I am using a quite old tool - Ciscoworks IPM 2.5 with CWRW-1.3 in my teaching lab installed in 2004. IPM is good tool for network lab working with Cisco 3700 routers.  Now I am trying to find latest IPM version to upgrade the lab. I find that latest IPM is version 4.2 with Ciscoworks LAN management Solution 3.2 only. But this production is also  end-of-sale and end-of -support  see the page -http://www.cisco.com/c/en/us/support/cloud-systems-management/ciscoworks-lan-management-solution-3-2/model.html
       - End-of-Sale Date:    08-APR-2011 Details
       - End-of-Support Date:    30-APR-2014 Details
    Now I have no idea how to upgrade IPM? Which tool from Cisco or a third party can be replacement of IPM?
     Dan Li,
    Concordia University

    Dan,
    IPM and LMS 3.2 are EOS/EOL. But the features are still available in the latest version of LMS, aka, Cisco prime LMS 4.2.
    Cisco Prime LMS 4.x onwards the module specific approach was re-structured to feature centric menu, and hence Cisco Prime LMS 4.2 has all the required + enhanced IPM features.
    You can upgrade to LMS 4.2, however, we encourage everyone to move to Cisco Prime Infrastructure, which is more future proof, as Marvin recommended.
    IPM feature in Cisco Prime LMS 4.2 is known as Performance Management.
    For more details check :
    Navigating Cisco Prime Internetwork Performance Monitor Tasks in LMS 4.2
    Performance Management
    Cisco Prime LMS 4.2 and Cisco Prime Infrastructure 2.2 Functional Comparison
    -Thanks
    Vinod
    **Encourage Contributors. RATE Them**

  • How to genarate performance monitoring report in SAP PI automatically

    Dear All,
    I have a requirement where I need to automatically generate a report of monthly data of Performance monitoring in SAP PI  and send it to business users.
    As per my understanding, this can be achieved by pulling the data every month from the tables where these data of Performance monitoring is maintained internally within SAP PI.
    Please provide me inputs as which table stores these data/ and solutions to acheive this.
    Thanks
    Azahar

    Refer below links .. You can write abap report to make it happen
    Re: Get count of the messages to particular Interface in a day and send email
    /people/gourav.khare2/blog/2007/12/12/interesting-abap-tables-in-xi-150-part-i
    http://wiki.sdn.sap.com/wiki/display/XI/UsefulABAPtablesinSAP+XI

  • How do I write/use performance monitor to run an action when something happens?

    I notice that I get a popup if desktop resources are over-used asking me if I want to turn off the glass desktop.
    That's fine.
    I've been looking in Performance Monitor for how this is done, as I have a program that periodically runs amok and starts indexing my Documents directory.  I usually start to notice my machine getting sluggish when the process gets to about 1.5-2+GB
    in Virtual and working memory.  At that point it seems to be increasing it's network usage rate geometically, and interrups will start getting delayed or lost -- keyboard will lock up for periods, lots of things freezing temporarily (music will get 10-20
    second dropouts)  It can even cause a complete system lockup
    So what I would like to do is monitor any instance of this process by name ('explorer'), and restart it when it gets to over 1.5GB of usage.
    I setup a monitor of virtual size and working memory in the performance monitor, but I don't see how to set up an alarm that starts an action to restart it.  (restarting it will cause the problem to go away for anywhere from a few hours to several days).
    I've no clue as to what triggers it.
    I found a bunch of XML scripts in
    Windows/pla/Rules with names like:
    Rules.System.CPU.xml*
    Rules.System.Common.xml*
    Rules.System.Configuration.xml*
    Rules.System.Diagnostics.xml*
    Rules.System.Disk.xml*
    Rules.System.Finale.xml*
    Rules.System.Memory.xml*
    Rules.System.NetDiagFramework.xml*
    Rules.System.NetTrace.xml*
    Rules.System.Network.xml*
    Rules.System.Performance.xml*
    Rules.System.Performance.xml.orig*
    Rules.System.Summary.xml*
    Rules.System.Wired.xml*
    Rules.System.Wireless.xml*
    These have some XML language in them that looks like it woud be for monitorying and doing actions:
      <Rule name="$(RuleDiskSummary)" enabled="true">
       <Step select="/Report/Section/Table[@name='hotFile']">
        <Exists>
         <Otherwise>
          <Delete select="Summary"/>
         </Otherwise>
        </Exists>
       </Step>
       <Step select="/Report/Section/Table[@name='physicalDiskCounters']" fatal="true">
        <Exists>
         <Otherwise>
          <Insert>
           <Node>
            <Summary key="100" find="field" field="counter" value="Avg. Disk Queue Length" topic="diskInfo">
             <Data name="max" label="diskQueue"/>
            </Summary>
           </Node>
          </Insert>
         </Otherwise>
        </Exists>
       </Step>
      </Rule>
     </Group>
     <StringTable>
      <String ID="GroupSummary">Add Summary Blocks</String>
      <String ID="RuleMemorySummary">Memory Summary</String>
      <String ID="RuleDiskSummary">Disk Summary</String>
      <String ID="RuleNetworkSummary">Network Summary</String>
     </StringTable>
      <Rule name="$(RuleDiskSummary)" enabled="true">
       <Step select="/Report/Section/Table[@name='hotFile']">
        <Exists>
         <Otherwise>
          <Delete select="Summary"/>
         </Otherwise>
        </Exists>
       </Step>
       <Step select="/Report/Section/Table[@name='physicalDiskCounters']" fatal="true">
        <Exists>
         <Otherwise>
          <Insert>
           <Node>
            <Summary key="100" find="field" field="counter" value="Avg. Disk Queue Length" topic="diskInfo">
             <Data name="max" label="diskQueue"/>
            </Summary>
           </Node>
          </Insert>
         </Otherwise>
        </Exists>
       </Step>
      </Rule>
     </Group>
     <StringTable>
      <String ID="GroupSummary">Add Summary Blocks</String>
      <String ID="RuleMemorySummary">Memory Summary</String>
      <String ID="RuleDiskSummary">Disk Summary</String>
      <String ID="RuleNetworkSummary">Network Summary</String>
     </StringTable>
    Question is, how can I setup it for calling a trigger script when
    parameters for Explorer get out of spec.
    On confusing issue that stopped me from proceeding, was the time schedule to run the report:
    I only allows for once/day. 
    I need / want continuous monitorying -- say at 1 minute or 3 minute intervals (5 might work, not sure -- doesn't take long for Explorer to get to 1-2G with a network connection of 10Gb.
    So how can I monitor and control it?
    A side issue -- I notice a resource-control agent for Win 2008 -- but this was disabled for Win7.
    Anyone know why resource usage on Win7 was considered less important than on Win2k8 server?
    My version of Win7 is Win7-x64-sp1 "Ultimate" [sic] (it doesn't include professional features like resource control)...
    Thanks...This has bothered me for over a year and has persisted through new profiles and reinstalls of of the OS.
    I have a feeling it is related to MS disabling Network disks in their indexer, so Explorer ends up doing it as a surrogage for things like the search engine (with the results not stored, because they are not local -- the worst of both worlds?)... but that's
    just a feeling...
    Thanks!
    Astara...

    You can create a Data Collector Set (create manually, not template), then choose performance counter Alert, configure alert actions, from the script, seems you want to monitor the “physicalDisk” performance, so you can set the “physicalDiskCounters”
    into alert action, please follow the instruction in the link below.
    Monitor disk space
    http://www.ms-opsmgr.eu/?cat=43
    If you want to view the detailed process related about explorer when your machine getting sluggish, I'd like to introduce a tool named process explorer to you.
    http://technet.microsoft.com/en-in/sysinternals/bb896653.aspx
    It can clearly show you the processes running in your system, along with the hierarchical relationship and the cpu usage.
    NOTE
    This
    response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
    Microsoft
    does not control these sites and has not tested any software or information found on these sites.
    Regards
    Yolanda
    TechNet Community Support

  • Performance monitor reports and graphs don't show all the counters that were captured

    I've run into an odd behavior of performance monitor that I haven't been able to clear up yet: after I run a data collector set, the resulting report only shows a partial list of the counters that I captured, and so does the graph of that report (but different
    items).
    For instance, I chose the following counters for the data collector set:
    \PhysicalDisk(*)\% Idle Time
    \PhysicalDisk(*)\Avg. Disk Queue Length
    \PhysicalDisk(*)\Avg. Disk sec/Read
    \PhysicalDisk(*)\Avg. Disk sec/Write
    When the data collection ends, the report that gets displayed shows all those counters for _Total instance and C:, but then E: only shows % Idle Time and Avg. Disk Queue Length. That's it, the report ends there, even though I also have F: and V: drives on
    this server.
    If I choose to view the graph of this data collection, it only shows those four counters for the _Total instance.
    It took me a while to realize that all the data is being captured, but it's just the display that is truncated. If I view the folder then open the report.html, it actually shows all the data. Same with the graphs. If I select to add counters and add
    all the missing counters, they are displayed.
    I have searched high and low but haven't been able to find more than one post at ServerFault where someone had a similar issue, but no real solution or cause was provided, so I was hoping that someone here might have an idea.
    I also found a variety of articles about missing counters due to registry settings or because the counters needed to be reset, but that's a different issue that doesn't apply in my case. By the way, this is on a windows server 2012 R2 VM (file server).

    Hi SomeAdmin,
    The counter missing often caused by the related registry value is corrupted, please first refer the following related KB then perform a fix then monitor the issue again.
    Event ID 3012 — Performance Counter Loading
    http://technet.microsoft.com/en-us/library/cc775053(v=ws.10).aspx
    More information:
    Overview of Performance Monitoring
    http://technet.microsoft.com/en-us/library/cc958257.aspx
    PerfGuide: Analyzing Poor Disk Response Times
    http://social.technet.microsoft.com/wiki/contents/articles/1516.perfguide-analyzing-poor-disk-response-times.aspx
    Analyzing Storage Performance using the Windows Performance Analysis ToolKit (WPT)
    http://blogs.technet.com/b/robertsmith/archive/2012/02/07/analyzing-storage-performance-using-the-windows-performance-toolkit.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for

  • Aging out user profiles in Call Manager

    If a user profile is deleted in AD what is the length of time before that user is "aged out" / removed from the CUCM and CUC user DB? Is there a difference between how it works in 4.1 with Cisco Customer Directory Configuration Plug In vs. LDAP Synch

  • How to display the physical location of my file ?

    I got to display the physical lacation of a file in my HDD in a textbox. I'am using 'fileChooser' to get access to the HDD. Is there a method i can use in fileChooser which will display the path to the file? thanks

  • Apps to iTunes transfer

    Hi everyone, I'm new to the iPhone world and I recently downloaded a bunch of apps to my phone via the app store. It seems like I'll be having to get a replacement phone though, sadly, so I wanted to know if there's a way to save my apps from my phon

  • Jar file doesn't execute correctly

    I have created a jar file both manually and using Eclipse. I seem to run into the same strange issue however. When I run the jar file from the command line, it executes some of the code, however, it doesn't seem to run any code in one of my classes.

  • "Error Message: File video dimensions (width/height) too large"

    Hello, I believe someone else had a similar problem and posted to this forum, but here it goes... I have a project in Premiere CS3 that uses MPG files. The files open just fine in CS3 at work. At home I have CS4, but those MPG files do not import. I'