Principal functionalities which were added to the mySAP SRM 5.0

Hi everybody,
which are the principal functionalities which were added to the mySAP SRM 5.0 while comparing with mySAP SRM 2.0 ?
Thanks & Regards

Hi
Please go throuh the SAP Release Notes to get the detailed differences in Functionality ->
Ensure that you read the information contained in the Release Information Note (RIN) for the current support package.
Note 863532 - Release Restrictions mySAP SRM 2005
Note 852894 - SRM 5.0 SP-Stack 01 (10/2005): Release Information Note
Note 855306 Release note SRM Server 5.5 Support Package 01
Note 559048 - Support Package 04/Service Release 01 for SRM 2.0
http://help.sap.com/saphelp_srm50/helpdata/en/f5/b4bcdac7c40c4dba53e3695d18236c/frameset.htm
Hope this will help.
Regards
- Atul

Similar Messages

Phone Applications resort to original locations and/or locations in whihc they were added to the phone

This weekend my phone started cycling on and off for no apparent reason on Friday and Saturday. I replaced the battery about 3 times (properly using the shut down) to see if it was a battery problem but it was not. Then on one of the cycling on/off on Saturday the phone reset all the applications it appears to original pages and locations and the apps I have added (125) all over the place on the first tab/page in no logical order that I had them sorted in (my guess is they are now sorted in how they were added to the phone date and time wise, but that is just a guess). I have since moved my apps back to where they were but when reset the phone they all went back to unorganized. I moved them a few times and every time their location gets reset to an illogical order again. I was on chat here for an hour plus and after 45 minutes the first chat rep could not solve the issue so he just disconnected me. I reconnected, got the same rep, he read my name, and immediately disconnected me. I then did this with three new reps, they read the log after saying hello and their standard lines, then immediately disconnected the chat. So HP provides no service. If you want to call them it will cost you $14.95. IF you want to email them, they provide no email address. If you go to their free Chat service and they don't want to or don't know how to correct your issue they just disconnect you. I copied all the logs to a Word document so I'll probably just go to Verizon and they won't do anything so when my contract ends, I'll be with another provider and another phone company's products. But anyway, back to the issue at hand. I tried to move a couple of apps around then do a Palm backup to see if that would lock their locations in and then restarted/reset the phone and it still moved the apps back to a nonsensical location. I used this phone for a year and a quarter never having to move apps back to where I had moved them after resets but apparently I think HP did something this weekend that ended all that. I am not sure what all of your experiences have been but I don't think a week goes by on average that my phone does not have to be reset due to its problems or because I have run out of battery power and need to put in a new charged battery, with the Apps all over the place, this phone has basically become useless from a "smart Phone" standpoint. Anyone else having this issue and know of a solution?
Post relates to: Pre Plus p101vzw (Verizon)

Saying that I have solved the issue is not quite right...but...here is what I ended up doing and how I have in a way attenuated the problem...
I decided to reset the phone, start it from new....really. I mean, not installing absolutelly anything at all and going step by step like it was the first time. By not installing anything I include the 5.1.1 release. Very important part of the process of getting my phone to work again.
Every app I wanted to keep, I simply downloaded it again (I actually erased purposely the back ups to make sure it wasnt an issue with a corrupt file). The same goes for adding music and libraries.
As for emails, which were, I beleive, the dataacessd issue that kept on reporting to apple on low memory...I simply decided to keep only the main accounts I have...and NOT SYNC IT WITH ICLOUD!!! I took special attention to blocking SPAM from being sent to the phone...since I was worried if maybe this could be a malware...(I have to say I am still in doubt if it isn't...)
I downloaded an app called Memory Free, which shows perfectly that my memory is still running at the edge...at the most it reaches 20 Mbs...instead of the 400 or 500 it is supposed to be, but the crashes are much less frequent now. I would say it only happens if I am multitasking against 3 or 4 apps at the same time.
I can listen to music again...and I can be multitasking again...I can write messages without the app closing on me...then again, I insist...APPS STILL CRASH, only not as often as before.
Apple absolutely doesn't reply...and certainly aren't even looking into getting this fix...the Genius at the store or over the phone...or whatever, arent aware of the issue at all (or they pretend not to be)....and insist this is a HW issue, which more and more it seems to me like a "HW design flaw" then an actual HW issue.
I have to say I am certainly falling out of love with Apple all together (iMac, Ipad, iCapsule...), since literally they are all falling apart with issues.

Has anyone noticed that songs which were previously in the genius list could not longer be used to created a genius play list?

Has anyone noticed that songs which were previously in the genius list could not longer be used to created a genius play list? Songs like "The Gambler" by Kenny Rogers or a Beach Boy song can no longer be recognized to create a genius play list.

Has anyone noticed that songs which were previously in the genius list could not longer be used to created a genius play list? Songs like "The Gambler" by Kenny Rogers or a Beach Boy song can no longer be recognized to create a genius play list.

[svn] 1053: Basic and custom security-constraint samples were added to the team app mainly for the doc team to have a reference .

Revision: 1053
Author: [email protected]
Date: 2008-04-01 11:35:28 -0700 (Tue, 01 Apr 2008)
Log Message:
Basic and custom security-constraint samples were added to the team app mainly for the doc team to have a reference. The custom authentication sample uses the new ChannelSet.login and ChannelSet.logout methods.
Modified Paths:
blazeds/branches/3.0.x/apps/team/WEB-INF/flex/remoting-config.xml
blazeds/branches/3.0.x/apps/team/WEB-INF/flex/services-config.xml
Added Paths:
blazeds/branches/3.0.x/apps/team/features/security-constraints/
blazeds/branches/3.0.x/apps/team/features/security-constraints/README.txt
blazeds/branches/3.0.x/apps/team/features/security-constraints/securityConstraint_Basic.m xml
blazeds/branches/3.0.x/apps/team/features/security-constraints/securityConstraint_Custom. mxml
Removed Paths:
blazeds/branches/3.0.x/apps/team/features/remoting/remoting_AMF_SecurityConstraint_Basic. mxml

Congrats to Carmelo!
Windows Phone and Windows Store Apps Technical Guru - February 2015
Carmelo La Monica
Windows Phone 8: control Nokia Maps (Part 3)
JH: "Part 3 of the series how to work with the Nokia maps control. As the previous articles this one contains a lot of code snippets and some pictures. Good work!"
Ed Price: "A great topic, a fantastic breakdown of sections with clear descriptions, and a nice mix of code formatting and helpful images! Another stellar article from Carmelo! Great job including the link back at the end to the portal
article!"
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Mkinitcpio WARNING: No modules were added to the image.

I am trying to build a pf-kernel using this guide: https://wiki.archlinux.org/index.php/Ke … raditional
Everything went fine, but when I try to make the initramfs, I get this error:
mkinitcpio -k 3.13.3-pf-dbb-pf+ -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-dbb-pf.img
==> Starting build: 3.13.3-pf-dbb-pf+
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> WARNING: No modules were added to the image. This is probably not what you want.
==> Creating lz4 initcpio image: /boot/initramfs-linux-dbb-pf.img
==> Image generation successful
I searched the warning message, but all the posts I found were related to other errors, like a "module not found" or so. As you can see, I'm not getting any actual error message, just the warning.
Is this message just because the MODULES line of mkinitcpio.conf is blank, or something else?

I definitely ran `make modules_install`. Twice actually, because I thought something went wrong the first time.
A find command shows that there are some modules, but only a handful. My guess is that I forgot to copy a good config before running menuconfig, so I'll try building again.
I was wondering why it only took 10 minutes to build.

My iTunes gave me the option to erase and sync with the library or just sync with iTunes purchases. Since I hadsongs from many different sources, but which were all in the library, I tried the erase and resync option. It wiped out all my songs and put in

My iTunes gave me the option to erase and sync with the library or just sync with Itunes purchases. Since I have songs from more than one source and all my music was in the library, I chose the erase and sync option. All my music was wiped off my iPod and a few recent iTunes purchases were synced onto the iPod. All my music is still in the library, but it won't sync to my iPod. Making me crazy.

do this
http://docs.info.apple.com/article.html?artnum=61148

I am trying to attach photos in an e-mail (Gmail), however I can't access yesterday's or todays photos which were downloaded from the iphone to iphoto, and added to a new album. I can access all photos from all days previous to yesterday. Why? I

I am not able to access today's or yesterday's photos in the Attachment box when trying to e-mail photos using Gmail. I am using a new Mac Book Pro, photos from my iPhone, and download to iPhoto. All photos previous to yesterday are accessible. This is a recurring issue. Any help here?

The photos is question don't show up in the Last Import smart album?
In the Event mode set View ➙ Sort Events ➙ By Date ➙ Descending. That way the newest Events will be at the top of the window. Do you see the photos in the last couple of events?
If no to all of the above try the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.

Problem in getting IControlView of IconSuiteWidget which is added in the tree resource

Hi friends,
I am facing following problem while working with Tree Widget.
Please guide me regarding this issue.
I have added IconSuiteWidget to the tree resource in .fr file.
Now I wish to hide it after user clicks on the node. I have written
code for this in the file which is implementation of
(classTreeObserverImpl) ClassTreeObserver, aggregated on the boss
class kXXTreeViewWidgetBoss which inherits from the
kTreeViewWidgetBoss. But I am not getting IControlView of the
IconSuiteWidget . The work which I have done to get IControlView
pointer is through using IWidgetParent interface.
Could anybody tell me which step i am missing, because I am getting
IControlView of the RollOverIcon which is placed aside of
IconSuiteWidget(in the resource of tree).
Please help me regarding this issue,
Thanks in advance.
Vijay Choudhari.

Use IControlView* QueryWidgetFromNode ( const NodeID & node )
.So the task before you is gettting the NodeID..
You can get it from ..
NodeID_rv id = TrvNodeID::Create();
NodeID nodeID(id);
Once you get the controlview of the node widget you can get the controlview of any of its child widget by gettting its IPanelControldata..
Hope this helps..
regds,
yopangjo

Firefox will not display characters that were added by the webmaster on user PC?

I employed a company to design a site for me which is great. Then I asked them to add a small button/image in the back end (admin area) that when clicked on will send an email. No image will display so I got them to change it to Text format, still it is not showing on my end. The design company are able to send me emails showing where it is but I cannot see it. It is worthwhile mentioning that it will not display in either IE8 or Opera, Is it a firewall problem ? Or a setting on Windows 7?
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; eSobiSubscriber 2.0.4.16; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; AskTB5.6)

Can you post a link?
Did you try to bypass or clear the cache?
Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
You can reload the page and bypass the cache with:
* Press and hold Shift and left-click the Reload button.
* Press Ctrl + F5 or press Shift + Ctrl + R (Windows,Linux)
* Press Shift + Cmd + R (MAC)
See [[Keyboard shortcuts]] and [[Mouse shortcuts]]

How to debug the function separately which is added in the package

Hi Friends, I want to know how to debug the function separately, by taking it from package,. and i dont no where to add begin and end. and dont no how to give input to the function. ANd how to find the error which is detected from production, so i want to find from which statement its failing. So please guide me to proceed further. thanks in advance.

{ FUNCTION fn_get_trail_id (p_incr PLS_INTEGER DEFAULT 1) RETURN PLS_INTEGER IS
p_trail_id tb_xop_orders_trail.trail_id%TYPE;
BEGIN
IF p_incr >= 1 THEN
SELECT sq_xop_trail_id.NEXTVAL INTO p_trail_id FROM DUAL;
RETURN p_trail_id;
ELSIF p_incr = 0 THEN
SELECT sq_xop_trail_id.CURRVAL INTO p_trail_id FROM DUAL;
RETURN p_trail_id;
END IF;
END;
-- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
BEGIN
ppr_openlog('AQ');
ppr_request_lock(v_cb_handle, v_cb_lock);
pr_xop_log_errors('AQ: ==== cb started ('||descr.msg_id||') ====');
my function is like this, how i can i in clude it in declare statement, and how to assign values for that.. and where i have to include "begin".plz help me

How do I delete photos on my iPad that were added with the SD card adaptor?

I added photos to my iPad using the SD Card Adaptor over a year ago. They now appear in the 'Photos' tab on the iPad. They are not in Photo Stream and they do not appear in Albums under Camera Roll or Last Import. I have connected my iPad to the PC and opened the DCIM folder and they are not there at all.
I have Googled this question repeatedly and can not find an answer. I have viewed many YouTube tutorials that I thought would give me the right answer and... nope.
Can anyone please help?

Thanks Clyde. But the photos do not show up in iTunes either!
Well, let's just say, that I can't see them there! All I see in iTunes under Photos is the option to Sync photos.

I can't see the iViews or jpegs which I added into the Web Page with WPC

Hello,
I'm using Netweaver 2004's.
I created a Web Page in the Web Page Composer and in the Site Navigation a Navigation Node to this Web Page.
Then I added a jpg and an iView to this webpage.But I can't see this iView or this jpeg if i open the Web Page.
I'm superadministrator and i have the rights to watch this page
But if i click "Edit Page" i can see everything.
What can be wrong ?

Tobias -
I think Ursula is on the right track here.
I was having the same issue (not seeing iviews in the page - even in edit mode).
I think the solution (somehow) is configuring the initial permissions in the Security Zones.
The only problem is that the documentation is incorrect. The correction is in an SAP Note.
Below is the configuration (correction is bolded!):
Documentation says:
Defining Permissions for Security Zones
1. Navigate to Security Zones → com.sap.nw.wpc → wpc (not pagebuilder!). (The documenation says com.sap.nw.pagebuilder. This is incorrect!)
2. Define permissions for Web site owners and, if necessary, for authors.
a. From the context menu of the medium_safety folder, choose Open Permissions.
b. Give the wpc_editor_role role - or a user group - the permission End User.
You can leave the default entry for the Administrator column as None.
c. Choose Reset Child Permissions.
d. Choose Save.
3. Define permissions for users.
a. From the context menu of the no_safety folder, choose Open Permissions.
b. Give the everyone group - or another user group - the permission End User.
You can leave the default entry for the Administrator column as None.
c. Choose Reset Child Permissions.
d. Choose Save.
I made this change, and now I can see iviews in the page. I won't swear this is the solution, but that is the only change I have made lately.
Hope this helps.
BTW - this corrected setting of the security zones corrected other problems I was having. Before I did this, a user with the WPC role - but not super admin - could not edit pages from the published page (the Edit Page link at the top of the page in runtime). Now the user can.

Several Fonts are now missing in Microsoft Office (2010), which were present before the upgrade. Most notably, Calibri Bold will no longer display.

Has anyone else had anything similar happen? After I upgraded to Yosemite, several font families that were present in Office 2010 are now suddenly gone. Any document that I use Calibri Bold in now displays as something similar to Times. Even opening new documents, powerpoints, etc, does not fix the issue. On all web browsers, it displays correctly, and even as I type this question, I am able to use Calibri Bold, simply not within Office itself. Any clue?

It might be the case that OS X Yosemite disabled your MS fonts, by default. I found that Calibri Bold & Italic was disabled, so I had to enable it again.
HOW TO DO THIS...
In the "Spotlight Search" on the upper right-hand corner, type in "Font Book" and open the application.
--Click on "All Fonts."
--Scroll to "Calibri." Click on the font to open the drop-down menu. This should show you various font styles for that font family.
--If it says "off" next to it, right-click that style, and choose "Enable (font)."
Restart your documents, and you should be good to go.

IPhoto library inflates from photos which were rotated in the camera!!!

Hi,
that is awful! I wondered why my iPhoto library is so big. I use the library only for slideshows and creating albums, *NOT for editing*.
I found it out!!!
I have tested it with a folder of 100 photos (approx. 1.5 MB each). One version of the folder (NORM) contains 100 horizontal photos. An Other version of the folder (ROTA) contains the same 100 photos with the EXIF-Flag "Rotate 90 CW" (my camera sets this flag automaticaly). The size of the 2 folders are exactly the same:
<NORM>: 150.871.544 Bytes
<ROTA>: 150.871.544 Bytes
Before I import one of these folders, I create an empty iPhoto library, size: 14.556.512 Bytes
And now the results:
- If I import <NORM>, then the size of library grows up from 14 MB to 24 MB, reason: iPhoto generates thumbnails of every photo. That's OK.
- If I import <ROTA>, then the size of library grows up from 14 MB to *255 MB*!! What the heck!!! iPhoto generates thumbnails AND A VERSION OF EACH PHOTO IN FOLDER MODIFIED!!! The size of every modified photo is bigger then 2 MB now (original 1.5 MB)!! Why?? The photo is NOT modified!!!
Can you enlighten me?

Not searched the forum then? This "discovery" turns up every couple of weeks. And the answer has been the same since iPhoto 1.
Your camera has an Auto-Rotate feature. However, the camera does not actually rotate any pixels in the file, but instead flags it with an instruction: "Display me this way".
Photo, seeing the flag, reads the intention and creates a modified version. Without this version, apps that integrate with iphoto, (like Word Processors, Mail Clients and Web Browsers) would end up with sideways photos. Why? Because they don't understand EXIF tags.
If you then try to Revert to Original, iPhoto will remove the edited version. However, when it then looks at the Original file again, it sees the flag, and creates a new rotated version. This loop will run as long as you Revert to the Original.
The solution is to either a: turn off the Auto-Rotate feature on your camera or b: rotate the photos prior to importing them to iPhoto.
Regards
TD

On the Yahoo toolbar line the icons have disappeared which were next to the refresh toolbar icon and I can't get them to reappear.

The icons next to the refresh toolbar button have disappeared.
== This happened ==
Every time Firefox opened
== after installing updated firefox

Download malwarebytes Anti-Malware and run in your system
your problem will be solve automatically

Principal functionalities which were added to the mySAP SRM 5.0

Similar Messages

Maybe you are looking for