Print 4 -40 name columns in AW DR program

I have 4 columns of names(40 each) that I want to print in the drawing portion of AW. I'm using the DR part because I can get all 4 columns across a 11" page by rotateing each column 90 deg. Everything works just fine except the 1st column only prints about 2/3 of the column. I've checked for hidden ch. and found none. I've moved the column up or down but still does the same thing.
The names are all there on the screen (39 names) but only 29 print. That is in the first column all the rest are OK.
At my wits end don't know how to correct this any help would be greatly appreciated.
Also am using AW 6.2.6, OS10.2.8, Epson stylus CX6600 all-in-one

I guess that I didn't make myself clear enough. I can't use the WP part if AW cause when you make columns there they go down the whole page and I need to use thebottom 1/3 of page for something else, different size boxes with information in them and the drawing part works out the best so far.
You could format the whole document (or the section—including the bottoms of the pages—where you want to use for columns on the top third and different size boxes on the bottom) to four columns, then use Text frames to hold the material on the bottom of each page. Frames can be placed on the page without regard to column boundaries.
To place a Text frame in a WP document, press and hold the Option key, then drag the frame. This type of frame will hold the width you drag, and will expand vertically as you add text. It will disappear if it contains no text. To fix both width and height of the frame (and keep it on the page even when empty), use the Options menu to apply Frame Links to the frame.
When entering text into the columns, follow BF's suggestion and use a column break (ie. press Enter—not Return—) after the last entry in the column.
A second method would be to use a one row by four column Table on each page to hold the column material, then use Text frames (or a second Table) on the bottom third of the page for the other material.
Regards,
Barry

Similar Messages

How can I print the country name on an envelope in Program contacts?

How can I print the country name on an envelope in Program contacts?

On the normal vCard in Contacts I wrote in the name of the foreign country, for example:
Michael Meyer
13 Kinsington Road
VT Worthing
Great Britain
If I want to print this on an envelope there is no Country in the preview, how can I get in this Example Great Britain on the envelope?

Print those words where used % in name column

Please write a query where is used % in name column.
Example
Name_column
Ram%Mishra
Sudarshan%sharma
shyam%dubey
shukla%chaube

Define and use an ESCAPE character if using SQLPlus
SQL> create table hkc_test_1 (id_col number, name_col varchar2(30));
Table created.
SQL> insert into hkc_test_1 values (1,'Hemant%Someone');
1 row created.
SQL> select * from hkc_test_1;
    ID_COL NAME_COL
         1 Hemant%Someone
1 row selected.
SQL> insert into hkc_test_1 values (2,'Other');
1 row created.
SQL> show escape
escape OFF
SQL> set escape \
SQL> select * from hkc_test_1 where name_col like 'Hemant\%Some%';
    ID_COL NAME_COL
         1 Hemant%Someone
1 row selected.
SQL>Hemant K Chitale

Is there any way to do a mass copy and paste of song titles from the "name" column to the "sort name" column? I know it can be done with individual titles but I have over 6,000 titles in my library.

In iTunes, is there any way to do a mass copy and paste of song titles from the "name" column to the "sort name" column? I know it can be done with individual titles but I have over 6,000 titles in my library.

Thank you. I have heard of Logic Pro 7, but I have never personally used it. I'm still growing in the world of Composition, and I know that it is something I will be studying in one of my Computer Music classes coming up for my degree. I think it is something I will look into getting once I can justify the price of it. I guess for the time being, I will continue to play and grow in my ability to use and take advantage of GB, and then see what I can do about or with Logic Pro when I'm ready. The thought of spending $1000 for a program is hard to bite, because I've already spent a lot to produce my music, not only electronic music, but also chamber music and so on. I had no idea it would be so expensive to dive deep into the world of composition! lol.
Finale 2007: $500
Sibelius 4: $500
Jam Packs: $400
Midi Keyboard Interface: $100
PowerBook: $1700
Printer for printing scores and analysis: $150
Logic Pro 7: Oy!
As you can see it adds up very quickly...that doesn't even include my personal instruments and study materials.
Thank you for your input, as I haven't really worked much with LP, and therefore didn't know which features are available. I will talk with some of my Composition buddies, and professors and see what they have to say as well, and who knows, I may be able to get the express version through one of them.

Printer installs, but doesn't show in programs

This has really caused me some stress. I used this printer when I first got it and my computer for school. It worked great. Then I was out for summer and went back to school and it never would show up as a printer again. I have removed the device and reinstalled it. Everything seems to install just fine when plugged in. Here you can see that is is showing just fine in my devices and printers. However, I cannot set it as the default.
When I go into Word (or any program that can print like Acrobat Reader) You can see that here it does not show up:
I have plugged it into a different computer and it installed and printed.
Any ideas would be very helpful!
Thank you.

Hi,
Try following these steps and check if that may help:
Step one: create a restore point
These steps involve registry modifications, therefore be sure to create a restore point for any issues.
From the Start menu type Create into the search bar and click on 'Create a Restore point'.
Click on Create, select a unique name and create a restore point
Step two: Assign full permissions t the user and modify the default printer value.
1. Type regedit into the search bar and open the Registry Editor.
2. Browse to HKEY_CURRENT_USER > Software > Microsoft > WindowsNT > CurrentVersion.
3. From the left pane, right click the Windows subfolder and select Permissions.
4. Click the Add button, type your windows user account name and click on Check, then press OK and select Full Permissions for the user.
5. Click on add and type everyone, click on Check and press OK, select Full Permissions for Everyone as well.
6. From the left pane, click the Windows sub folder (under CurrentVersion).
7. From the right pane, Right click on Device within the name column and select Modify.
8. Delete any current value and type the following value instead (including the ending colon):
winspool,Ne00:
9. Reboot your PC and try setting the printer as default, then try printing from Word again.
Please let me know the results,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Receivables - ARDLP Report Not Printing Country Name

AR Report ARDLP for concurrent program Dunning Letter Generate is not printing Country Name on send to and remit to part of the letter. Though the package 'arp_addr_label_pkg.format_address' is giving the output with the country name(when I ran the package in SQL Developer) but when I run the report it is not giving the country name. What could be the reason?
Thanks,
Sravanthi

Thankyou very much Nagamohan. It is printing the country now on the dunning letters. I think it was because of settings in system options though the default country was set, print home country was unchecked. When I reran the process it printed the country.
The Statement print program also had the same issue. Now after the changing the system options, it is printing the country in the send to address but not in the remit to address if the countries are same for both send to and remit to. If they are different it is printing in both the places. Eg. If it is United Kingdom in both send to and remit to, its printing only in send to. If its united states in send to and united kingdom in remit to then its printing in the remit to area. Any idea on this?
Thanks,
Sravanthi

How to print the row ,column,and particular cell in separate color

how to print the row ,column,and particular cell in separate color IN ALV GRID

HI,
Here you go good program links
<a href="http://www.sapfans.com/forums/viewtopic.php?t=52107">How to Set Color to a Cell in AVL</a>
<a href="http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm">ALV Grid Coloring</a>
Thanks
Mahesh

How to remove or hide Name column while upload document in document library

Hi All,
In below print screen the first column Name* which always show when I'm going to upload the file which I don't want. It will be really help full if you provide some solution how to hide this column while uploading the document. Its really confusing the users
when they are going to upload the document in document library.
I already tested below steps. After clicking Document Content Type every column is clickable except "Name" column.
Go to Document Library settings -> Advance settings -> Allow management of content types -> check the box
Now go back to Document Library settings -> Under content types -> click Document content type -> select the column -> Hide this column
Every column is clickable except "Name" column so unable to resolve this issue. Please help.

Hi,
Thanks for posting your issue, Kindly browse the below URL to fix this issue
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/c7d0e0d5-084b-4d49-88fe-b411a70042bd/how-to-hide-the-name-column-in-the-document-library?forum=sharepointdevelopmentlegacy
http://spstipsutilitypack.codeplex.com/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Printing file name on document.

I want to print the name of the file when I print out a document. Instead of writing out the file name on each document, can't I just choose some preferance to do this for me?

In the Print dialog box, select "Marks and Bleed" in the left column, then select "Page Information"
This will print the document title, date and time of printout at the top of the document but if your document is 8.5x11 and you print it on an 8.5x11 piece of paper, then this information will not make it on your printed page.

How to print the name of the layout

Hi to all experts!
There is a way to print in any coommercial document (A/P Invoive, A/R Invoice, Delivery notes and so on...) the name of the layout printed??
And there is a way for the layout created for some query, to print the name of the layout and the name of the query?
Thank's in advance...
Edited by: Gianluca Calloni on Nov 6, 2009 9:33 AM
Edited by: Gianluca Calloni on Nov 6, 2009 9:35 AM

>
Madhan Babu C wrote:
> IF u need to print the PLD Name in Print. Try this,
> ->> Open the Require System PLD and Save as the New PLD.
> ->> Create 1 Database Field in Footer and assign the field.
>
> Table - RDOC
> Column - CardName.
>
>.
Ok.. But when i put a databasefiled in pld, i don't have the RDOC table....
Madhan Babu C wrote:
> ->> Create 1 TEXT field in Footer on PLD and HardCode the PLD Name.
> Regards,
> Madhan.
Yes.. I think is the only solution...

Add vendor name column in MB51

Dear Expert,
Do we possible to add one column of vendor name in MB51? because current layout we only can display vendor number. if possible, can you guide me how to add the vendor name column?
Thanks
pauline kurniawan

Sorry, there is no other way to add a field to MB51 that I know of. Ask you ABAPer to copy program RM07DOCS to say ZRM07DOCS and modify to add the extra field, then create a new transaction ZMB51 that will run ZRM07DOCS.

How to set the "Name" Column in EM

I am wondering how I can get the "Name" Column to be a set to a custom text of my choosing when it is set during runtime in my SOA composite.
Here is a link to a pic of the field I am trying to set
http://img13.imageshack.us/img13/1491/16823609.png
Edited by: 960635 on Nov 19, 2012 12:31 PM

Are you referring to having a checkmark symbol, or an actual checkbox that the user can change its state. If it's the former, then that's done by making symbols visible and writing to the Item Symbols property. If it's the latter, then that's something you have to program yourself. You may want to take a look at this thread, which points to an example on LAVA. There is also this example. All found using a search...

Change Print Job Name

I have a VB.NET Windows program that load a Report file with rpt.Load(ReporFile) and after send to printer with rpt.PrintToPrinter(NumberofCopy, False, 0, 0). I want to change the print job title. I see another post: How to set the CR print job name that displayed in Printer job queue? with this solution:
CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions prnOpts;
prnOpts.JobTitle = "hello world";
but I don't know how to get PrintReportOptions from my ReportClientdocument. The only I know it's rdc.PrintOutputController.GetPrintOptions but this retunrn a PrintOptions object that don't have JobTitle property.
Can someone help me ?
thanks Filippo

You will need to create this object and set its properties.
The majority of properties are not ones that you will read out of the report's printoptions anyways (ie number of copies, Jobtitle, page ranges etc)
so simply use something like:
PrintReportOptions prOpts = new PrintReportOptions();
prOpts.JobTitle = "Hello World";
prOpts.AddPrinterPageRange(1,1);
rcd.PrintOutputController.PrintReport(prOpts);

Could not print "image name" because there is not enough memory (RAM).

I cannot print anything from Photoshop CS5. I always get the message:
Could not print “image name” because there is not enough memory (RAM).
I'm using Mac OS 10.6.8, with 8 GB RAM. I have tried setting memory usage to 100% of RAM (7379 MB for me). The "Ideal Range" is 4058-5313 MB. I cannot print anything, not even a 20 kB file because I always get that error message.
I've tried unistalling & reinstalling, just to see if that did anything. It didn't help.
Does anyione have any ideas for what the problem is?
Thanks,
Dan
(I don't have a problem printing from any other programs, like Gimp, but I want to print from Photoshop because of they way it allows you to adjust what part of the image you print when you are cropping the image during printing.)

shanahan3030 wrote:
…have tried setting memory usage to 100% of RAM (7379 MB for me…
That is never a good idea. You're starving the OS of RAM. Try pulling it back to 70% or less.
Also, clarify how much disk space you have left on your boot drive and on your scratch drive.

Why can't I move the "name" column??

This is a question that has been bothering me for a very long time. Why can't I move the "Name" column in the library (or playlist) view away from it's left position? It seems to be locked into place. I can move and arrange artist, album, time, bitrate, track #, etc etc etc to any configuration I so desire, but yet the name column remains eternally glued to the left side of that pane, never to be moved.
The reason I ask, is because when I organize my music, I don't immediately think of track names, I think of artists. Especially in this day of cds I am hard pressed to recall individual song names. At home my albums and cds are filed by artist name, not by song name (physically impossible, obviously). It's a natural tree-like organization... artist->album->song name. I want to configure the library view in iTunes to match this same logical hiearchy but for some reason iTunes will not let me do this one extremly simple thing... argh and double argh!! Is there any reason for this? Is there any way to solve this?

Chad hello,
Everybody here has given you good advice so I will explain why the name column can not be moved...
Your Music library is a data base and a data base has to have at least one totally unique index field for each file... now it can not be the Artist as you can have as many songs as you like by the same artist... same reason for the album, one album can have many songs but the same album name... same for genre etc.
The only thing that can be unique is the song title... If you put the exact same song by the same artist the program will assign a unique name by adding a number in front of the extension for each duplicate .... example
Song Name.mp3
Song Name_1.mp3
Song Name_2.mp3
So when you think about it the song name is the only thing that is different... one album by the same Artist may have more than one track of exactly the same length, size, genre, composer etc. moving through all fields except the name....
Now why can't you move the name column... well all the other fields do not have to be unique so you can move and/or remove these columns but if you could remove the name column you could end up with more than one entry in your library looking exactly the same.... you have to have something that allows you to separate them and that is the unique index field 'Song Name'....it could not work any other way..
hope you can follow all that.... take care... TP

Print 4 -40 name columns in AW DR program

Similar Messages

Maybe you are looking for