Print 6i report on HPUX in duplex mode

I can't seem to get a 6i report launched in on an HP box to print in Duplex.
I have tried the "create duplexsed file" solution but to no success.
I would appreciate any help.

Did you find a solution?

Similar Messages

Canon MF4370dn printing on 10.6.3 (No duplex mode, used as network printer)

I have already installed the latest Canon MF4370dn printer drive 2.06 but the "Two-sided" option in the "preview" combo box is always disabled. And I have only the following options in "Printer setup" -> "Driver" tab:
Paper type of stack Bypass:
Paper type of cassette 1:
Please help!

Just found a way to solve it from web:
Open a document in Preview
Press print
The pring dialog opens
There will be a combo box called pre view, change that to finishing
In that select print style as 2 sided print ing from default 1 sided

Duplex print with Report 6i on SUN Solaris

Dear All,
I would like to know if it's possible to print in duplex mode using Report 6i on SUN Solaris. If yes! show me the way.Thanks for help.

Hi DG,
Thanks a lot for being patient with me.
Here is what df -k returned.
# df -k
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0d1s0 1139022 711306 370765 66% /
/proc 0 0 0 0% /proc
fd 0 0 0 0% /dev/fd
mnttab 0 0 0 0% /etc/mnttab
swap 215536 4 215532 1% /var/run
swap 215848 316 215532 1% /tmp
/dev/dsk/c0d1s7 6404645 4938156 1402443 78% /export/home
# who
root console Jul 20 14:09 (:0)
root pts/4 Jul 20 14:10 (:0.0)
The foregoing list shows that I do not have sufficient disk space. Oracle Install documentation says I should have 3GB for a full install. My second hard disk should be able to handle this, but I do not know yet how I can add more disk space to the file system. Can you please tell me how I can do this?
Meanwhile I am deleting the 13 files 9iAS10220_part1 through 9iAS10220_part13 to free up some disk space. Having extracted files and created Disk1 through Disk5, I do not think I will need these 13 files anymore.
I am still trying to understand what runInstaller script is trying to do.
Roger
null

Configurations done at SAP gui level to print in duplex mode

Hi Gurus,
We had a requirement to convert a printer to duplex mode, we changed all the settings at SAP level( kept duplex mode in printing mode and changed device type to SWAN (as post and pre2 device types are not available) ). But still we are not able to get the desired duplex mode.
Is there are any further settings or something done in server?
Is there any settings done at SAP gui to get the print as duplex from a report?
Thanks in advance....
Gopal.vvs

Hi,
Check the below links
duplex printing configuration in SAP
http://www.sap-basis-abap.com/sapab035.htm
Hope it helps you.
Rgds,
Suman

Problem on print a report in mode character

hi, i have oracle 8i and reports 6i, my reports it's generate in mode character, when i send to print (printer epson fx1180), the print is bad, (i configure the prt files example: bold esc "E", Unbold esc "F"),
MY problem is with windows 2000, i send to print on windows 98 and all good, but now i have windows 2000, anybody help me to config the printers file for windows 2000

You can create a PDF file using the [itext |http://www.lowagie.com/iText/] library
you can create reports using jasperreports
you can print the reports and save them as PDF,EXCEL ,HTML and more...
(jasperreports is using the [itext |http://www.lowagie.com/iText/] library )
you can edit your reports using ireport
hope that helps

Print landscape report in character mode

Hi!
It seems that I should change xxx.prt file in DESFORMAT parameter to match different kinds of printers in order to print landscape report in character mode.
Our customers are international wide. How can I do to make this setting meet every customer for printing reports in landscape style?
We will run the reports on Unix on the middle tier and customers read them in browser.
Thanks for help.
null

Hi,
This sounds like a similar problem that I had (and still having). It was (is) a Bug. Go to metalink.oracle.com and reference this bug#1413754. See if this is your problem as well. My only work around was change the format of the file instead of using character mode I am now using PDF. Which is working fine for me.
~Vannette

How to print a report in draft mode from oracle ids 9i?

Hi...
I m using oracle ids 9i.i want to print the report in draft mode.Is there any option in reports developer or forms developer to print report in draft mode?
Please anyone help me?
Regards...
KSI

Kaji,
try the Reports forum: Reports
Frank

How to print a report in landscape mode?

Hello everybody,
I have a task where in i need to print a report in LANSCAPE format.
I have tried to print the report output but i could not found an option to set LANDSCAPE mode and also how to change the font size.
Can anybody suggest me the approach?
Helpful answers will surely be rewarded.
Thanks in advance.
Sanghamitra.

Hi
If you are using the command MEW-PAGE PRINT ON
then we can give this layout options
like
NEW-PAGE PRINT ON
DESTINATION <printer name>
immediately 'X'
KEEP IN SPOOL 'X'
LAYOUT 'X_65_132' (OR X_65_255)
RECEIVER SY-UNAME
NO-DISPLAY.
OTHERWISE WHEN YOU SELECT THE PRINTER
IN THE PRINTER PROPERTIES/SETTINGS BASICS-> PAPER
you will have this facility to select LANGSCAPE/PORTRAIT
use that and print
Reward points for useful Answers
Regards
Anji

Printing multiple copies of 3 page BOL in Duplex mode-

Hi Gurus!
I have created a smartform to print the BOL on front side and terms and conditions on back side. I used the duplex mode to print and it works perfectly fine. When I have a BOL with 3 pages of information , it prints the items on the front side and terms and conditions on the second side and it does everything absolutely correctly.
At our organization we always print 5 copies of any BOL and that is when the problem arises. When we do a printing of the BOL form with number of copies set to 5 , it prints very akwardly with the settings. First it prints page 1 front and same thing on the back, then again the first page on the first and its back and then front on the third side , then similarly 5 sides of terms and conditions and then followed by 5 sides of page 2 items and followed by 5 sides of terms and conditions, which is very akward. Actually it should print first set with page 1 and TC on back of it , then Page 2 and TC on its back and page 3 and TC on its side like it does when I make a single copy.
Is there any settings that I am missing thats making the above happen when I print multiple copies of the BOL?
Please suggest.

Hi!
Thanks for the reply. I changed the settings of the printer to 'Pass Copies as Separate Output Request(in SAP System)' and re-tried printing 5 copies of the BOL and it again seems to print the first page 5 sides then Terms and conditions on 5 sides, then again 5 sides of page 2 and followed by 5 sides of T&C.
My settings on the smartforms is front page "D' and the back and the Last page is blank setting. This runs well when I just have to print one copy of my BOL , it prints the front page and then T&C on its back side , then again the second page and T&C on its back . This only messes when its more than one copy of the set of BOL.
Please suggest as to what to do next to make it print in proper sets.
Thanks and Regards
Aarav

SmartForm Last Page to be printed in Duplex mode

I have a requirement in PO printout where the Last page containing the Terms and Condition to be printed on Duplex mode.
Suppose the PO is taking 4 pages without Terms and condition. then the TC must be printed on the backside of the 4th page.
My smartform contains 3 Pages 'First', 'Next' and 'TC'.
If i set page 'Next' duplex then the 3rd page is getting printed on the back side of the 2nd page.
So how can i Print the TC page on the backside of the Last Page.
Thanks & Regards
Sukriti.

Hi All,
I know this is a very old post. Currently I am also facing same issue. Does anybody has solution for it. ?
Regards,
Leona

Printing on the A5 in duplex mode on the printer HP1606dn

Good day! When you print on A5 format in duplex mode on the printer only prints HP1606dn second page - the printer does not return the page to be printed on the other side. When printing on A4 prints on both sides of the paper. Format settings before printing exhibited true. The problem is the driver? Installed Software 2012-10-17, Version 9.0
Need help! FNX

Don't know the answer, just a comment:
The User Guide manual states:
The printer driver only supports certain media sizes for automatic duplexing.
Use the manual duplexing procedure for media sizes not available in the printer driver
although it doesn't appear to say which sizes are affected!

Print in duplex mode

Hi experts,
I need to print on duplex mode ABAP list documents. My printer works with HPLJ4 PCL5 driver (ricoh Aficio 3045) on SAP but when i try to print on duplex mode (the printer properties are set to print on duplex by default) i can't get it.
I don't use Smart forms. On SPAD i have created a new device, the acces metod is F: Printing on front end computer, the device type copy of original HPLJ4 to test it, but i only can get paper printed simplex.
Please, Can you help me?
Thanks in advance

Hi,
The duplex settings in SPAD only work for device types that have the special list driver, Try using device type HPLJ4000 instead of HPLJ4 and create a new spool.
Regards,
Aidan

CR VS2005 ActiveX Printing Mode print the report larger

Hi,
I have a problem with CR VS2005 for ActiveX printing mode. It will print the report larger than usual so when I print it to the printer, some parts will cut off. But the report will print okay if I export it to pdf and print from the acrobat reader.
Can anybody help me how to fix this?
I'm using this in my development:
OS: WIndows XP SP2
Visual Studio 2005
CR for VS2005
and the application is web application.
Thanks before...

1) Try this with SP 1 for CR 10.2 applied:
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
2) see if there are any updates for your printer driver
3) See if you can duplicate this with a different printer driver
4) I believe CR 10.2 had "No printer" option (Design | Page Setup). Enable that.
Ludek

How Can I print my report through character mode using DOS, very very urgent

Hi all
I would like to print my reports instead of from windows based, I want to print through DOS mode. While giving dos mode printouts report builder is hanging and comming out. Any help will be appreciated.
Thanks
Reddy

Hi Reddy,
Here is the solution.
At Dos\> ORACLE_HOME\BIN\RWRUN60 <followed by the report name and desired arguments >
srini

How to print a PDF document in duplex mode using command prompt?

I want to print a pdf document in DUPLEX mode by command prompt.Already tried with /p and /t.

Hello Ram,
Please see this link - http://www.coolutils.com/Print-PDF-duplex-cmd
~Deepak

Print 6i report on HPUX in duplex mode

Similar Messages

Maybe you are looking for