Print A4 size report in A5 page

i design a report with A4 size, in basic it print to an A4 size, but i could export it to pdf file and open printer settings and select A5 then it print A4 report in A5 page ( printer scale it automatically).
and now my question:
how can i change settings programming that it print A4 report in A5 page by code (without any manual printer default settings change )

From the designer you can try this:
Open the report in designer and go to Print option, select the "No Printer" checkbox. Save it and give it a try with the saved report from application.

Similar Messages

Cannot print actual size when choosing several pages per paper

I'm using Adobe Reader XI and trying to print a pdf (exported from InDesign)´where each page is in A5 format. I want to print two A5 pages for each A4 paper. However, when I click the button Several (or similar, I'm using Swedish version) there is a fixed 25 mm margin around each A5 page so that the pages are much reduced on the printout. I'd like to print actual size, and I think this was possible in a previous version. If I print one A5 per A4 paper I can print the actual size. I tried the button Print Format (equiv.) but the margins are fixed and cannot be changed. Awkward. Thanks for help or explanation why this is so.

I have a little more information. I turned on "single hairline" border and as you can see, it's converting my square pages into "US Letter" pages BEFORE applying them two-to-a-page. So it's using my selection of "Paper Size" as both the source and destination paper size, rather than just the destination size, because my source is obviously 12x12 square (confirmed by looking at page properties in preview). Apple, please fix this

Print Different Size Photo, one per page

I am using PS5 in 64 bit mode. I print on a Epson 3880 printer. I shoot all photos in RAW. I process all my RAW files in ACR accomplishing 80% of changes and the balance 20% in PS. The output of my retouch is a Master Image (MI) File that I would like to print at different sizes. I am starting to sell my images at Art Shops and Hops. My customers would like to have different size images of my MI's How do I print from the MI, different sizes images with a 150 - 300 ppi and maintain the integrity of the MI?
I have tried the Image Tool but it will not let me print the image sizes that my customers want. The Image Tool only allows me to change one dimension either (H) or (W) but not both. Help.
Jack

If you want to print standard size images like 16x20, 8x10, 5x7, 4x6 etc these have different aspect ratios you will need to crop you image to the correct aspect ratio for the print you want or you could print different print sizes that have the same aspect ratio. Like you camera most likely has a 3:2 aspect ratio if you use a DSLR. You could print all 3:2 aspect ratios image on you 3800. 3x2, 6x4, 9x6,12x8 15x10, 18x12, 21x14, 24x16... all that needs to be changed is the print DPI setting without resampling. You have a 3800 that can print up to 17" wide. You can print any size you want. Some image cry out to be cropped. They look best cropped for image composition is often best as some non standard aspect ratio.

Printing BI Publisher report from OAF Page WITHOUT Preview or Save Option

I have a requirement to print a BI Publisher Report on the invoke of a Button from a OAF Page. I have followed the method suggested in the below link to integrate OAF and BI Publisher.-
http://apps2fusion.com/at/51-ps/260-integrating-xml-publisher-and-oa-framework
In this scenario, I already developed Data Definition (XML) and Template (RTF) for the report and a self service page with 'Generate PDF' button. When the button is clicked the template is getting filled with the data from the database and displaying the PDF output. A dialog box with 'Open/Save/Cancel' appears before the PDF document is shown.
But my requirement is to avoid this dialog box and Save option so when the button is clicked the document has to be directly sent to the printer.
Is there anyway to achieve this? Please help as this is very urgent..
Thanks,
Naren

Naveen,
You need to read the documentation here:
http://www.oracle.com/technetwork/middleware/bi-publisher/documentation/xmlpdocs-084437.html
All of the information you need is in these:
Administration and Developer's Guide
Report Designer's Guide
JavaDocs
With the BI publisher (XML publisher) Java APIs, you can call a data template with parameters and get the XML from that.
For an example that should be very close to what you need to do, see the comments section of this page:
http://apps2fusion.com/at/ps/294-bi-publisher-document-viewer-common-region-embeded-report-output-in-oa-framework-page-part-2
Find the comment titled: "Alternative: BlobDomain from data template"
The great thing about using a Data Template is that, while you are NOT concurrent program dependent, you can still set up a concurrent program to run it for other purposes if you wish. Data Templates offer a lot more flexibility.
Kurz

ARIA Employee Directory -How to Print Multiple Direct Report On a page

This question goes out to the experts. If we have person that has 10,15 or a large number of direct reports how can we print them on to a page so that they all fit. I am okay if they fall to another line just need to get them all on one page rather than multiple because they fall outside the print parameters?
All help in this area would be greatly apprecaited
Steve

Maybe. Keep in mind HTML was never made for print. It's quite possibly the worst medium you could choose for print. You won't be able to establish page breaks or even draw consistent boxes. In short, I estimate the probability of success in creating an org chart with an HTML template to be somewhere around 1%. I just don't want to see you spend an absurd number of hours trying to build something that's really not possible.
With that said, here are a few options to consider:
- Microsoft Word and Visio both have Org Chart functionality, though I'm not sure if you can populate it with data from a database. This would be an offline solution wherein one of the developers would, on a periodic basis, generate a new version of the org chart, export it to PDF, then post it as a static file.
- Oracle BI Publisher supports Word shapes for templates, including Org Charts per this documentation:
http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#T481174
though I think it might take effort to get the template to work. At least the output medium (PDF or RTF) is made for print.
- GraphViz (http://www.graphviz.org) is the most promising online solution I can think of. It's a command-line tool, so you would need to
-- generate the data in a file and output that to the file system of the database server (UTL_FILE)
-- call the command-line utility via a dbms_scheduler job, since you need call an OS utility from inside the database
-- provide a link to the output of graphviz.
Take a look at this image, then click on it to see the code that generated it, since that's essentially the format you'll need to output:
http://www.graphviz.org/Gallery/directed/unix.html
There's my 2 cents. If someone is asking you to do this all in HTML, please send them a link to this post.
Tyler

Printing BI Publisher report from OAF Page

We have a requirement to display a BI Publisher Report on the invoke of a Button/Link from a OAF Page. One way to achieve this without invoking a concurrent program is by following the method described in the link below :-
http://apps2fusion.com/at/51-ps/260-integrating-xml-publisher-and-oa-framework
In the current scenario, we already have developed Data Definition (XML) and Template (RTF) for the report and is used too. We want to use the same Data Definition and Template but invoke from a OAF Page. Is there a way to achieve this?
In the method mentioned in the above link, we would have to create many VO's to generate the XML, since the XML needed in our case is a detailed one, we would need to create many VO's to achieve this. Hence looking out for a way in which we can invoke the Data Definition (XML) already registered in the BI Publisher.
Any inputs to achieve this would be helpful.
Regards
Naveen

Naveen,
You need to read the documentation here:
http://www.oracle.com/technetwork/middleware/bi-publisher/documentation/xmlpdocs-084437.html
All of the information you need is in these:
Administration and Developer's Guide
Report Designer's Guide
JavaDocs
With the BI publisher (XML publisher) Java APIs, you can call a data template with parameters and get the XML from that.
For an example that should be very close to what you need to do, see the comments section of this page:
http://apps2fusion.com/at/ps/294-bi-publisher-document-viewer-common-region-embeded-report-output-in-oa-framework-page-part-2
Find the comment titled: "Alternative: BlobDomain from data template"
The great thing about using a Data Template is that, while you are NOT concurrent program dependent, you can still set up a concurrent program to run it for other purposes if you wish. Data Templates offer a lot more flexibility.
Kurz

Printing ABAP List(Report output - SE38) in A3 format

I have a requirement to print the ABAP report in A3 page format. I am using LP01 printer and in in SPAD transcation I Changed the Tab "Output Attributes"
Paper tray = "Paper tray 3" and Tab "Tray Info" Tray 3 = "DINA3" still the report gets print in A4 page format.
Even i tried by changing the lize size and line count...still .... it prints in A4 format only.
Could you let me know what exactly I need to in order to print my report output in A3 Page format.
Waiting for your reply.
Thanks in Advance,
Steevan

Hi,
Check this below link
http://www.sap-img.com/basis/how-can-i-print-a3-format-in-sap.htm
Cheers!!
VEnk@

How to create a report with different page sizes

Hi,
I would like to create a report with different page sizes, it's possible to do it with diadem?
When I change the layout parameters, changes afect to all sheets...
Is there a way to change page size individually for each sheet?
Thanks in advance.
Marc

Hi Marc,
You can use the DocStart and DocEnd commands along with the PicPrint command to spool multiple print commands to the same output PDF file using the direct printer approach. This should enable you to programmatically specify the page size differently for each sheet that you add to the print job.
' Print PDF Page by Page.VBS
OPTION EXPLICIT
Dim i, Path, OldPrintName
Path = AutoActPath & "2D Stacked"
Call DataDelAll
Call DataFileLoad(Path & ".TDM")
PDFFileName = Path & " Page by Page.pdf"
IF FileExist(PDFFileName) THEN Call FileDelete(PDFFileName)
OldPrintName = PrintName
PrintName = "winspool,DIAdem PDF Export,LPT1:" ' Set to PDF printer
PDFResolution = "72 DPI" ' "2400 DPI" , "default"
PDFOptimization = TRUE
PDFFontsEmbedded = FALSE
PDFJPGCompressed = "high"
PrintOrient = "landscape" ' orient paper
Call PrintMaxScale("GRAPH") ' auto-max, see alternative margin setting variables below
PrintLeftMarg = 0.181
PrintTopMarg = 0.181
PrintWidth = 10.67
'PrintHeigth = 7 (read-only)
Call WndShow("REPORT")
Call DocStart ' Begin multi-page document/print job
FOR i = 1 TO 4
Call PicLoad(Path & ".TDR")
Call GraphSheetNGet(1)
Call GraphSheetRename(GraphSheetName, "Page " & i)
Call PicUpdate
Call PicPrint("WinPrint") ' Add a page to be printed
NEXT ' i
Call DocEnd ' End multi-page document/print job
PrintName = OldPrintName
Call ExtProgram(PDFFileName)
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to get Report Builder to print a section on the same page

I have a section of my report that is three bands. A header
band, the detail band, and a total line band. Sometimes this
section will get split up and print part on the next page. So
basically I need for this section to print on the same page. I know
that I could insert a page break right above the header, but this
will make my report way longer than it needs to be. I have also
unchecked "split allowed" for that band also but that didn't make a
difference. Is there some way to group three bands together so that
if it is two big to print the section on the current page then
print the whole section on the next page. It is driving our
accounting lady nuts because when she likes to verify that the
totals are coming out right and sometimes she has to flip over to
the next page to continue calculating.

you need to create a multi-instrument in the environment next to your audio-instrument,then push a cable from there to your audio-instrument.in the arrange window your multi-instrument will appear in the window where you select the track-type next to the audio tracks, audio-busses etc. these midi tracks now trigger your vsti on the selected midi channel.you have to record your midi now on these tracks and not on the audio-instrument track,because there you only trigger its own channel. i hope i explained it well but i think you have understood what i ment.

Smart forms- when i print a report it print main window data on same page

hi,
when i print a report it print main window data on same page .
i.e. if data is more then one page then it shows data page wise on computer screen but when i print it print all data on same only one page by over wrriting .
pl. help why it is happening
i create page in page i set next page and in second page give first page.
mukesh

mukesh,
what happened to this: smart form
close that please.
by the way,did you tried with what i suggested?
lets say mainwindow in 1st page.
copy the first page to second page.
now.
for 1st page: next page is : page2
for page2: next page is also : page2

How do I set a default page size, orientation, and printer for a particular document in Pages?

I have a simple label document in Pages which I print to my label printer. The label is 1.49 x 3.47 inches and needs to print in Landscape, and it needs to print to my Dymo label printer. How do I set up the Page Setup or Print Setup so it defaults to this document size, orientation, and printer, every time, without me having to manually enter those settings every time?

Thank you for your reply. However, I could not get Templates to work correctly for me. Following your instructions, I opened my document, opened Page Setup, set the printer, paper size, orientation, and printed a copy to make sure it was right. Then I re-opened Page Setup to verify that the settings were still correct. Then I saved the document as a Template. Then I found my template in Pages, opened the template, and tried to print. The first thing I noticed was that the template did not remember my printer. Then I set the printer, and printed, but I found that the template also did not remember the page size or the document orientation. So, did I miss a step here? Lion 10.7.5 and Mac Mini.

Print Multiple copies of report, and resetting Page number for each copy.

Dear frnds!
i am using developer 6i reports i have a problem.
i want to Print Multiple copies of report, and resetting Page number for each copy" that is 4 copies of an invoice is required
1 - for user copy
2- gate copy
3- accounts office
4- office copy
any body please tell me the solution "i am using oracle 9i and developer 6i"
Thanx
Ibrar

Hi,
I was wondering if you were able to get your multiple copies working? Below is what I have so far, just trying to get it to work before changing the actual template.
<?for-each-group@section:R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?variable@incontext:G1;R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,3,1)?>
HEADER
PSN: <?$G1/Pick_Slip_Number_Display_ID54?>
PSN Detail: <?$G1/PickSlipNumber_ID260?>
Page 1 of 3
<?start:body?>
BODY
<?$G1/LineNumber_ID6?>
<?end body?>
FOOTER
<?end for-each?>
<?end for-each-group?>
XML:
<R5542520>
<Pick_Slips_Detail_Lines_S24>
<Header_Custom_Section_S24>
<Pick_Slip_Number_Display_ID54>123456</Pick_Slip_Number_Display_ID54>
<PickSlipNumber_ID260>123456</PickSlipNumber_ID260>

Unable to print the report in second page

Hi,
I've got a problem in the report. Here In a report, I'm able to print the report's data in the first page only. I'm unable to print it in the second page,third page etc.
To rectify the problem, I've selected all the fields and set their property "Print Object on" to All pages. Still the problem exists.
Thanks in advance.
Regards,

What exactly do you mean by 'unable' ? Do you only get a 1 page report, OR do you get multiple pages with the 2nd, 3rd blank OR do the 2nd, 3rd have text but not data OR something else?
"Print Object On" should be "First Page" - it sounds wrong but it's talking about logical pages (which may be multiple physical pages).

How to print a label in the last page of the report

Hi, I have a report af bottom page I trid to put a label, the label is in the margin, but when I change the print condition send me a error, illegal print condition, how can I print this label only in the last page at the botton of the page
Thanks

Herbe,
You can do this using format trigger
Please see the building reports manual / Tutorial for details
at http://otn.oracle.com/docs/products/reports/content.html
Thanks
The Oracle Reports team

How to print report from JSP Page

Hi Everybody,
I am developing a simple project in JSP with MS Access. I hav some tables and reports for them. I hav a JSP page which gets inputs from user and save it in the table. Its working fine. But my problems are,
1) I hav a button called "SAVE & PRINT" in that bottom of the page, if i click that button, the currently entered data has to save in the table and the same data has to print from the MS Access report. I dont know how to print this report from JSP page.
2) Another button called "REPRINT". If i click that button, it has to ask a number to print the report page, that number is nothing but a field in that report.
Could anyone help me to solve this problem.

Hi Everybody,
I am developing a simple project in JSP with MS Access. I hav some tables and reports for them. I hav a JSP page which gets inputs from user and save it in the table. Its working fine. But my problems are,
1) I hav a button called "SAVE & PRINT" in that bottom of the page, if i click that button, the currently entered data has to save in the table and the same data has to print from the MS Access report. I dont know how to print this report from JSP page.
2) Another button called "REPRINT". If i click that button, it has to ask a number to print the report page, that number is nothing but a field in that report.
Could anyone help me to solve this problem.

Print A4 size report in A5 page

Similar Messages

Maybe you are looking for