Print control in Smart forms?

Dear All:
I have a question in my SMARTFORM page development that i want to calling the smartform many times in my program.
1.IN R/3 RELEASE VERSION: 4.7, it can call Function module--> SSF_OPEN and SSF_CLOSE using parameters of control_parameters  to control printing spool.
2.But IN R/3 RELEASE VERSION: 4.6C, the Function module--> SSF_OPEN  is doesn't have parameters of control_parameters.
Does anyone know how to control the printing spool in  VERSION:4.6C and show me an example?
Any help whould be highly appreciated.
Many thanks in advance.
Regards,
Elvis

Dear All:
I am glad to sloved this question by myself.
IN R/3 RELEASE VERSION: 4.6C ,if you want to control the printing spool.You can doing by follow step:
1. You can define parameter like this DATA: control_parameters TYPE ssfctrlop.
2. Then set the schema for control_parameters-no_open and control_parameters-no_close.
   First form output:
        control_parameters-no_open  = ' '.
        control_parameters-no_close = 'X'.
   Additional output:
        control_parameters-no_open  = 'X'.
        control_parameters-no_close = 'X'.
   Last output:
        control_parameters-no_open  = 'X'.
        control_parameters-no_close = ' '.

Similar Messages

  • Use of NACE after creating print program n smart form

    Wat's d purpose of NACE?I hav created my own print program n smart form according to my own requirement.If NACE is necessary 4 my smart from.How can i use NACE i mean navigation steps.
    Please help me out.Its urgent.
    Thanks & Regards,
    Santhosh.

    Hi Santhosh,
    Nace is for message control settings. Say if u want to trigger a Smartform or an Idoc or any other customized program u can do the message control settings.
    Say at the time of Sales Order creation or updation u want to trigger a Smartform, then u have to follow the following steps:
    Goto NACE
    Select application V1 and then click Output Type.
    create a new Output type or copy the existing one abd save it with new name
    then in Processing Routine Mention the driver program name and in Form routine mention the main subroutine name.
    In Smartform mention your SMartform name and also the layout if u have ceated.
    Again go to NACE and Select application V1 and press Procedures.
    here out of the many procedures u have to select the right one and attach your Output Type to it.
    You can also create a condition record..Say if u want to trigger this Smartforms for Sales Order of particular type.
    Hope this helps.
    Reward Points if useful.
    Thanks.

  • How to print bullet in smart form

    Hi Experts,
    I have a requirement in smart form  where different points of texts should come under a bullet.
    Can you please tell  me how to print bullet in smart form.
    Note : I have to use Standard text   
    Thanks in advance
    Bikas

    hi
    good
    We can create bullets in smartforms.
    For this change the editor to text editor and then
    goto insert->characters->SAP Symbols and select the
    symbol you want.
    This may help your requirement.
    You cannot see the bullets in print preview, it'll
    appear only on a hard copy.
    reward point if helpful.
    thanks
    mrutyun^

  • How to Printe Graphics in Smart-Forms

    Guys,
    Need your help…
    Is it possible to print graph in smart form???
    If yes, if you have any document, please pass it to me…
    Dhiraj

    Hi Ram,
    Go through this hope u can understand.
    How to Upload graphics (IMAGE) to your Sapscript?
    Command in your Sapscript
    /: INCLUDE Z_YOUR_LOGO OBJECT TEXT ID ST LANGUAGE E
    These are the steps to be followed for uploading graphics in R/3 system 
    1.   First save the file as BMP 
    2.   Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and 
          make it Zoom as 100% and save as *.TIFF 
    3.   Open SE38 and execute program RSTXLDMC
    4.   Give your TIFF file path name 
    5.   Select Bcol (for Color) 
    6.   TEXT ID will be ZHEX-MACRO-*. 
    7.   Inplace of * write your own logo name (ZCOMPANYLOGO) 
    8.   Execute the program 
    9.   Now Goto SE71 create your ZFORM 
    10. Create logo window 
    11. Goto text element of logo window 
    or
    In 4.6x :-
    1.  Goto SE71 Change the mode to GRAPHICAL 
    2.  Choose the Graph Tabstrips
    3.  Now type in some name for the LOGO WINDOW 
    4.  Press the IMPORT BUTTON (third button from left) and then IMPORT the BMP file from your DESKTOP 
    5.  The code will be written automatically. You just need to drag and drop wherever you want
         the graphics to be. 
    /:   INCLUDE Z_COMPANY_LOGO OBJECT GRAPHICS ID BMON LANGUAGE EN
    Reward points if help ful.
    http://www.sap-img.com/ts001.htm
    Sorry i think for Scripts ..
    better to go for above post . it definetly works
    Thanks
    Naveen khan
    Message was edited by:
            Pattan Naveen

  • Passing printer name to smart form

    Hi,
    How to pass more than four characters printer name to smart form function  module name. Please  help me. I will give points.
    Thanks.

    Hi,
        Thanks for your reply but there I can pass maximum four character printer name but my case printer name contains 12 characters. If I pass 12 characters printer name it is considering first four characters and it is displaying printer name is not found. So please tell me how to pass more than four characters printer name.
    Thanks.

  • Print portrait orientation smart forms zebra printer

    Hello,
    I have designed a label with smart forms. The dimensions are the following: width = 11 cm. Height: 15 cm. The label has been designed in portrait form but the zebra 105 SL printer print it in landscape format. Does Anybody knows how to fix this problem ?
    Thank you.

    Hi,
    You didn't check your printer settings in Printers and Faxes in control panel. It cannot happen the way you say.
    Feel free to revert back.
    --Ragu

  • Print preview of smart form

    Hi all,
    how to view the print preview of a smart form and how to debug the smart form
    Thank You

    SMARTFORM-> execute->execute->pass values if require to import & table parameters ->execute-> on the pop up window give Printer name as LP01 and press print preview.
    For debussing -
    1. write BREAK POINT in the code window.
    2. Put a break point on the call function in the driver program
    3. put a brak point in the generated Function module.
    Refer this link too -
    Re: smartforms
    Regards,
    Amit

  • How to Print Vertically in Smart Forms

    I need to print data in vertical format into columns in smart forms. Can any one give me the solution.

    Hi Sreedhar,
    In Smartforms, if you need to print vertical text, only possible way (That i know) is, Create a Bitmap image of the text and rotate the same to 90 deg and then use that image in your smartform....
    If you can use adobe forms, you can rotate the text to any angle that you want....this is one of the main advantage of adobe forms.
    Best Regards,
    Ram.

  • Slow down printing speed for Smart Forms

    Hi,
    Is there any command (etc.) to slow down the printing speed of an Hp laserjet when printing a smart forms?
    I need that because when I print that smart form to fast I run into print out quality problems.
    Many Thanks

    hi,
    take print out in a dot matrix printer instead of your laser printer without changing any settings.
    Coz i tried this once, i was successfull. But, the printout will be very slow.
    regards,
    kool.

  • Print Output in Smart forms

    Hi,
    There is a Strange issue I am facing now that is print output is getting changed according to the printer settings.
    Even though I specified the output_options-tdprinter = 'ZPDFUC',and output_options-tddest = 'LP01' while calling smart form FM the printer option always takes the printer setting present in user profile.
    Is there a solution where the smart form by default picks one printer but not in the User profile settings.
    Regards,
    Deepa

    Hi,
    There is a field check it and set the value X to overwrite the system details with manual settings. when calling the smartforms.
    Thanks,
    Vinayaka

  • Using Continuos Printing stationary with smart forms is that possible ?

    Hi All,
    there is an instance where we have to use continuo's stationary for printing Payment Advices for the vendors with bankers cheque attached to the payment advise is that possible in smartforms also i have know that is possible in scripts but the requirement is in smartforms and can we do that in Smartforms.
    If any one have seen the same instance earlier, take your time to guide me the process.
    Thanx all in advance..
    Raj

    With smart forms i have dropped the idea as it is not that flexible as script..
    if am not wrong~
    I have resolved it and have done the needful for printing the cheques and Payment Advices... in scripts with any kind of printer.. using Scripts.
    Any one dealing with FI ABAP having any kind of issues with the Payments advices and cheques can always ping me for any doubts...
    payment advices ,
    cheque printing,
    vendor aging,
    customer aging,
    brs upload program,
    Service tax reports,
    TDS reports,
    vendor master upload,
    customer master upload,
    gl balance upload,
    NCR Report,
    and some co Reports..
    these are some of the things where  i have masterd for now..
    any one i need of these can always get in touch...
    cheers and all the best.. to be a brilliant ABAPER...
    Raj ([email protected])

  • Problem in multiple printing in the Smart Forms

    Hi Experts,
    From the driver program I am passing Internal table with multiple records for employee,
    But the smart forms is printing only single form for the employee.
    Could you please suggest what need to be done in order to print multiple forms for employee.
    Regards,
    IFF

    IF sy-tabix EQ 1 .------>only for first loop it will give dialog box
          CALL FUNCTION fm_name
            EXPORTING
              user_settings      = 'X'
              vbeln              = it_vbeln-vbeln
              pdf                = r2
              rbiclear           = c3
            IMPORTING
              job_output_options = job_out
              einv               = einv.
        ELSE.
               c_par-no_dialog = 'X'.----
    > if u set this then u will not get dialog box again and again
           out_opt-tdnoprev = 'X'.
            out_opt-tddest = job_out-tddest.
            out_opt-tdprinter = job_out-tdprinter.
          CALL FUNCTION fm_name
            EXPORTING
              control_parameters = c_par
              output_options     = out_opt
              user_settings      = space
              vbeln              = it_vbeln-vbeln
              pdf                = r2
              rbiclear           = c3
            IMPORTING
              job_output_options = job_out
              einv               = einv.
        ENDIF.

  • Printing data in Smart form side by side.

    Hi Abap Guru's,
                          I have data in internal table. i dont know how many records are there in it. I need to print the data, side by side in smart form.
    For example:
    Mr James was a member of the above-mentioned plan. you and <b>your children, Tom , jane , Harry and Michael,</b> are entitled to receive pension.
    > children must be printed side by side in smart form.
    Thank you in advance,
    -Anil

    Hi anil,
    In case you are having problems in finding the no of records in the internal table use the following command.
    DESCRIBE TABLE itab LINES w_lines.
    w_lines gives u the no of records.
    For further help u need to tell the structure of the internal table.
    Hope it is helpfull to u.

  • Unable to print graphics using smart forms

    Please some one help in printer settings for graphical printing in smart forms.
    Instead of graphic it  interprits the graphics as a text and prints text.
    please urgent...................help me

    hey no worries I got the answer thank you.

  • Print string in Smart Form

    hi, i have a problem while print long string in smart form.
    If the string is too long to display in one line,
    it is split into another line.
    However, the words are also split into two lines.
    For example,
    my string is "this is a long string",
    when it is printed , it become
    "this is a lo
    ng string"
    Does anyone know how to solve this problem?
    Would u pleas tell me, thanks a lot.

    Hi,
    U better to maintain standard text in SO10
    Then call the text into the SF.
    I think it will work
    Regards,

Maybe you are looking for