Print Data Collection

I am looking for a print data collection tool similar to PrintSolv or FleetPrint for PC environments. The target environment is 100% Apple computers (Servers, desktops & Laptops) and primarily HP & Epson printers. We could introduce a PC to the environment to perform the print data collection on network printers but neither PrintSolv or FleetPrint have a Mac agent to collect data from direct attached printers.
Thank you for your help.

Look into PrintCapture. I managed it at a client a few years ago, so don't know how well it works with Intel/10.5, but it worked pretty well on Tiger/PPC - the client was able to collate print numbers and bill their clients from the information.
Matt

Similar Messages

HP LJ M4555 MFP no Device Utilization Data Collection in Web Jetadmin 10.2.77156 (SR6)

Recently added three newer HP LaserJet M4555 MFPs to our Web Jetadmin Data Collection for reporting. The Data Collection for Accessory Inventory, Supply Utilization, Device Inventory and Event Log History all worked - they return a Collection Status of Collection Succeeded.
However the Device Utilization returns a Collection Status of Device Error (not very helpful).
We're using
Web Jetadmin 10.2.77156 (SR6)
I couldn't see anything flagged in this doco as to why it might not work:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01894187/c01894187.pdf
All three MFPs are
Firmware Datecode: 20121208
Firmware Revision: 2201057_231936
I couldn't see anything flagged in this doco as to why it might not work:
ftp://ftp.hp.com/pub/softlib/software12/COL38070/sj-114224-1/readme_ljM4555fw_2201057_231936.pdf
We have several older M4555 MFPs that we are collecting this data from successfully - I've tried to compare settings and can't see anything different standing out. They do have older firmware.
Firmware Datecode: 20110225
Firmware Revision: 2110187_149149
and
Firmware Datecode: 20111217
Firmware Revision: 2131305_192067
Any MFP with any of these firmware revisions report the data fine.
Does anyone know if there is a particular setting that is required to allow the Device Utilization Data Collection?
Or if there are any known incompatibilites with this firmware revision?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

ASCP Data Collection Fails

Dear Members :
For sake of learning, ATP in R12.1.1 Vision instance, I created a simple ATP rule with Demand as Sales Order and Supply as PO, On-hand Available.
I followed all the steps as below:
1) After creating ATP rule and attaching it to the order mgmt tab in item master, enabled ATP at the org level.
2) created sourcing rule for that item and assigned it to an assignment set(Supplier Scheduling).
3) This assignment set appears by default to MRP:ATP assignment set profile option
4) Set INV : Capable to Promise to ATP/CTP based on collected data, at responsibility level
5) Include organizations to instance TST(default)
6) Run ATP Data collection Program.
RCS is errored out with User-Defined Exception (Source Setup Objects Creation Requests did not complete Successfully) along with Collection Triggers/Views errored out with
Error with creating Source Triggers/Views
Is it my setup problem or patch I need to apply, if you could please guide ?
Thanks in advance.
Atanu

Following are in log for them:
**Starts**03-JAN-2011 20:00:52
**Ends**03-JAN-2011 20:12:22
Error in creating Source Triggers
Start of log messages from FND_FILE
03-JAN 20:00:52 : Request : 5807365 :Creates Item Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807366 :Creates BOM Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807367 :Creates Routing Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807368 :Creates WIP Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807369 :Creates Demand Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807370 :Creates Supply Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807371 :Creates Other Triggers used by Collections Process
03-JAN 20:00:52 : Request : 5807372 :Creates Repair Order Triggers used by Collections Process
End of log messages from FND_FILE
***********************************AND that of Source Views details :**************************************************************
**Starts**03-JAN-2011 20:00:47
**Ends**03-JAN-2011 20:12:18
Error in creating Source Views
Start of log messages from FND_FILE
03-JAN 20:00:47 : Request : 5807356 :Creates Setup Views used by Collections Process
03-JAN 20:00:47 : Request : 5807357 :Creates Item Views used by Collections Process
03-JAN 20:00:47 : Request : 5807358 :Creates BOM Views used by Collections Process
03-JAN 20:00:47 : Request : 5807359 :Creates Routing Views used by Collections Process
03-JAN 20:00:47 : Request : 5807360 :Creates WIP Views used by Collections Process
03-JAN 20:00:47 : Request : 5807361 :Creates Demand Views used by Collections Process
03-JAN 20:00:48 : Request : 5807362 :Creates Supply Views used by Collections Process
03-JAN 20:00:48 : Request : 5807363 :Creates Other Views used by Collections Process
03-JAN 20:00:48 : Request : 5807364 :Creates Repair Order Views used by Collections Process
End of log messages from FND_FILE
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
Concurrent request completed
Current system time is 03-JAN-2011 20:12:18
======================================================================
Thanks
Atanu

Please help with creating a summary report from data collected in a fillable PDF form.

I'm sure this has been asked before so I apologize in advance - I'm new to this forum and I'm not quite sure of which section I should be in. If I may just describe a certain scenario of something I am trying to create - could you please point me in the right direction?
I'm looking to create a summary report/form to help me better organize my patients after each appointment. So data collected from other fillable forms I've created, will lead to the final page to print that will include selections from fillable text boxes or drop down lists, etc to basically summarize each encounter. It should go something like this:
FORM 1:
-pt chart #
-pg age
-purpose for visit
-date of visit
-diagnosis
-prognosis
-etc
SUMMARY page
On (-date of visit), patient (-pt chart #) arrived with complaint of (-purpose for visit)....
The diagnosis was determined to be (-diagnosis), treatment to be performed is suggested to be (-treatment) with a (-prognosis) prognosis. Treatment was (accepted or not) and completed on... etc. etc... you get the idea
Does anyone know how I can do this?
Thank you all for your time and advice!

I have downloaded Castor and got some good tutorials, but.......
There is a problem, when I try to use the Marshaller to get an XML document the following error is reported:
java.lang.NoClassDefFoundError: org/apache/xml/serialize/XMLSerializer
I have scanned the Internet looking for a solution, some recommend including Xecers in the Classpath. I downloaded Xerces 2.7.1 and added it to as instructed but this did not work.
Hope you can help

[JAVA] How to input data collected in a table

Hello!
I'm writing a program that monitors the signal of a sensor in a chart. Now I want to insert into a table of data collected by the sensor using a JTable.The problem is that if I run the program, data are not included in the table.
Where did I go wrong?
Here's part of the source code.
ArrayList<Data> datiArray = new ArrayList<Data>();
DataTableModel dtm= new DataTableModel(datiArray);
public class DataTableModel extends AbstractTableModel {
    private ArrayList<Data> datiArray;    // <---- Il table model ha la collezione
    public DataTableModel(ArrayList<Data> datiArray) {
        this.datiArray=datiArray;
    public void addData(Data d) {
        datiArray.add(d);
int row = datiArray.size()-1;
fireTableRowsInserted(row,row);
         private String colName[] = {"Time", "G-value" };
        public String getColumnName(int col) {
            return colName[col];
        public int getRowCount() {
            return datiArray.size();
        public int getColumnCount() {
            return 2;
        public boolean isCellEditable(int row, int col) {
            return false;
          public Class getColumnClass(int c) {
          return (c == 0) ? Long.class : Double.class;
public Object getValueAt(int row, int column) {
        Data d = datiArray.get(row);
        switch (column) {
            case 0: return dati.getTime();
            case 1: return dati.getGvalue();
        return null;
    private class Data {
        public long time;
        public double gvalue;
        public Data(long time, double gvalue) {
            this.tempo = tempo;
                      this.gvalue = gvalue;
public long getTime() { return time; }
    public double getGvalue() { return gvalue; }
RecordButtonAction
    private void recordButtonActionPerformed(java.awt.event.ActionEvent evt) {
        int i=0;
int j= graphView.getSampleTime();
int k=graphView.getIndexMax();
System.out.println(j);
System.out.println(k);
        while(i<k){
Data dr= new Data(graphView.getTime(i),graphView.getGvalue(i));
//datiArray.add(dr);
dtm.addData(dr);
//these System.out.println are served to me to check if the values were actually included in the class Data and DataTableModel
System.out.print(graphView.getTime(i));
System.out.println("/t"+graphView.getGvalue(i));
System.out.println(dr.getTime());
System.out.println(dtm.getValueAt(i ,1 ));
        i=i+j;
        readyRecord = false;
Sorry for my bad English.

Please don't cross-post the same question in multiple forums. Especially since you've already been given directions as to how to ask the question smartly.

WJA - Failed Alerts - Data Collection Inaccuracies

I have been running Web Jetadmin v10.2.7491B on a 2003 server for about 3 years. There are 120 managed printers consisting of 9 different models.
Issue #1
Initially I had alerts configured on all printers that would send an email when a consumable dropped below 3%. This worked very relibly for the first year. Over time, an increasing number of printers stopped sending reports, until eventually only a handful sent alerts. I never found the cause of this problem.
Issue #2
Since alerts were broken, I setup a daily data collection for all printers and a morning csv report sent via email. I would then sort the data by remaining consumable percentage and replace those at 1% or below. Recently, 3 models out of 9 have stopped reporting accurate consumable percentages in the daily reports. This problem seems to correspond with a firmware update I pushed out to all printers. The WJA console DOES show accurate information for individual printers when they are selected.
Steps taken to resolve #2
Printers have been removed from the all Report Data Collection groups, and then added back. This did not resolve the issue. Printers were initially added individually to a Data Collection, but I have implemented a Group Policy that automatically adds a printer to the Data Collection. 6 printer models still show accurate percentages, but models 4345, 4730, and 5035 do not.
Is there a database file I can delete that will force a Data Collection rebuild for all printers? Is it possible the new firmware for the 3 listed models has a bug that prevents the data from being updated?
This question was solved.
View Solution.

This forum is focused on consumer level products. For this issue you may have better results posting in the Enterprise Print Servers, Network Storage and Web Jetadmin forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Can not start data Collection service

I have installed Fabric Manager version 3.3.(4). In the Performance Web Client I can not start the service Data Collection is in starting forever.
I also could not stop it. I rebooted the server and the status for this service is in starting.
Thanks,

Please provide more details like: Server OS, Java version, and what type of database you are using for the FM Server. Have you considered using a newer version of FM Server?

Customer Name on Sales Order not in Data Collections

Hi,
I am looking for some help. My company just did an upgrade from 11i to R12 in the middle of May. As part of the upgrade we installed ASCP. We have noticed that certain customers are not being collected when running Standard Data Collections. We have open sales orders in the system for the customer. The sales order are being collected properly and appear in the plan. When we show the Customer field in the 'Supply/Demand Screen' in ASCP, the field is blank for select customers. Is there anything on the customer master or sales order line that would prevent the customer name from being collected? Any insight would be helpful.
Thanks
Rich

You can go to order organizer screen select the OA NO which you are not able to see in the ASCP workbench, go to line items---using show field get the Demand visible
tab on screen-----default value should be 'Y' if blank then then that could be the one of the reason.

Data Collection -- Planning Data Pull process failed

Hello Experts,
I am having a problem with data collection, the result of Planning Data Pull was completed error. It seems the problem is on the Planning Data Pull Worker.
I am using 2 worker to run Planning Data Pull, and both result was errors. Below are some of the errors log:
16-MAY 19:11:34 : Procedure MSC_CL_SETUP_PULL.LOAD_CALENDAR_DATE started.
Into populate_rsrc_cal
16-MAY-2011 19:11:40
APS string is Invalid, check for Error condition
16-MAY 19:11:40 : Error in Routine GMP_CALENDAR_PKG.POPULATE_RSRC_CAL.
16-MAY 19:11:40 : User-Defined Exception
16-MAY 19:11:40 : User-Defined Exception
16-MAY 19:11:40 : Error_Stack...
16-MAY 19:11:40 : ORA-06510: PL/SQL: unhandled user-defined exception
16-MAY 19:11:40 : Error_Backtrace...
16-MAY 19:11:40 : ORA-06512: at "APPS.MSC_CL_PULL", line 6218
ORA-06512: at "APPS.MSC_CL_PULL", line 1583
Help me please.
Thanks & Regards,
Andi

This error shows up when it cannot find any organizations.
Use the sqls below to identify this
1. select MSC_CL_PULL.get_org_str(&instance_id) from dual ;
2. select instance_code, instance_id from msc.msc_apps_instances where instance_code='&instance_code'
3. select * from apps.msc_instance_orgs where sr_instance_id= &instanc_id
sql 1 should in principle return the orgs available. If this returns null or -9999, then it's an orgs problem
sql 3 will show the available orgs.
If the organizations are enabled for planning in the ASCP instances form, then run a targeted refresh for trading partners (suppliers/customers/orgs). If this works with no errors, then look at the table msc_trading_partners. It should contain records for the orgs with partner_type = 3

Print Layout Desigener print date

Dear all,
In our Balance Report we want to fill in the Print Layout the Print Date.
is there a possibility for filling this?
The path of balance report is :
Financials__ Financial Reports__ Financial__ Trial Balance
Thank you and best regards to all!!
Serkan

Hi Nat,
thank you for your fast and helpfull support.
it works
regards
Serkan

Print Date issue in Dunning Correspondence

Hi,
I have an issue with Print Date in Dunning correspondence. The dunning proposal and activity run has happened. The correspondence printing will fetch the accounts from the database as per the print date.
1. I would like to know where and how the dunning activity data stored?
2. Where and How the Print date assigned for accounts which helps FPCOPARA to retrieve accounts on that particular date?
Please HELP

Hello Joe,
I still have the issue with this print date.
I have given only cores type and as u said the real print.
when i checked the corrhist for a particular CA, different times different future date has come.
For eg: date is issue: 12/01/2009 (mmddyyyy) printdate is 12/20/2009.
10/01/2009 10/15/2009
like this, many cust have this issue.
why this prind date for some CAs are different or future dates?
where the settings for this print date will be?
Because of this, on a particular day all the dunned CAs are not picking up for Correspondence printing. these excepted CAs will come on another future day printing.
please share some ideas to solve this issue
Regards,
Sunitha

How to print Data Model in Report??

Do anyone know how to print Data Model??
Thanks your help.
- Frank

Hi Venkat,
Thanks alot.... i am checking the appendix k.
I want to know that if i want to customize the report as per the client requirement,
can you please let me know which template i will use if i required remittence advice as well as check print data on the layout.
The following is the list of field i required:
Vendor ID
Check Date
Check number
invoice date
invoice/ CR memo number
invoice description
invoice gross amount
invoice discount amount
invoice net amount
total gross amount
total discount amount
total net amount
logo
company name and info
bank name and info
check number
check amount spelled out
check date
check amount numeric
payee name
CEO signature
MICR check number
MICR routing number
MICR bank account number
mailing return address
mailing address
Venkat it would be great help if you please let me know the exact process to be follow for check printing report.
I worked on bi publisher report in 11i, but in 12i the process is bit different.
also if you have any template ready can you please send me on my mail id ... i forwarded you the test mail from my official id or on [email protected]
Looking forward to your kind response.
Regards
Ratnesh

How to print date & time in photos

Thanks for the help.
I need to print either photos with time and dates in them... or the Bridge contact sheet with date and time info.
The final printed image will be used in court to photo document evidence.
Do I have to do a screen capture or is there some other way?
My camera will not allow me to imprint time and date.
I'm using CS4 on both Windows and Mac.
Thanks again in advance for the taking the time to help.
Dances With Pixels
I may have sent this twice, but I'm new to this and this is my first time trying to post.

Thank you for taking the time to respond. Much appreciated.
And will follow up on your suggestions.
Date: Tue, 10 Aug 2010 23:55:31 -0600
From: [email protected]
To: [email protected]
Subject: How to print date & time in photos
I think there are (various) Scripts about for that.
For example addExifDate1.5.jsx:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1346521
One should be able to adapt it to include the time.
You could ask in the Photoshop Scripting Forum or http://www.ps-scripts.com/
>

Pages 08: No "print date"?

I am just testing iWork '08 and hope to replace MS Office soon. In MS Word documents I am used to set dates as date of printing ("Insert > Field > Date > PrintDate"). This comes very handy, because I usually want to have the date of the day when the document was printed shown in my letters. As a secondary effect, when opening a document later, I see exactly when the document has been created or printed, because the print date remains in the document unchanged (until I would print it out again).
In Pages 08 I do see how to insert a date field ("Insert > Date/Time"), but I'm only able to adjust this to the actual date. Does Pages not offer any possibility to insert a PrintDate, like Word does?

iCoco wrote:
Does Pages not offer any possibility to insert a PrintDate, like Word does?
Happily, as far as I know, nobody wrote that Pages is offering all the features available in Word.
You met one of the missing one.
If you wish to insert a fixed date, the response was given several times and a simple search in the existing threads would have point to the thread.
The first returned thread contains the response which is:
use the free WordService from the site:
http://www.devon-technologies.com/products/freeware/services.html
Yvan KOENIG (from FRANCE mercredi 9 juillet 2008 19:31:16)

Dispaly Printing Details like printing date

Hi
Does any know if there is an option to display/print in every report
the printing details like printing date , title , page , and input parameters fields
Thanks in advance
Regards

PAGE : &SFSY-PAGE& OF &SFSY-FORMPAGES&
DATE : &SFSY-DATE&
TIME : &SFSY-TIME&
USER LOGON : &SFSY-USERNAME&
kishan negi

Print Data Collection

Similar Messages

Maybe you are looking for