Print document with changes

I have enlarged a document, when I print only original size prints. How do I print document with changes?

Welcome to Discussions - do you have a scanner? If so, read the manual that came with it and it will tell you how to scan. If you do not have a scanner, the function is not available as an application with your Mac, you need to buy a stand-alone scanner or multi-function printer.

Similar Messages

Printing document with Notes/Comments and underlined/highlighted text

Dear all,
I have been reading a document and highlighted & underlined parts of it.
In addition I also inserted notes.
Now when trying to print the document with the "summarize comments function" (I translate this from the
german version so there it might be called somewhat differently in english) in the print menue, I receive a the
original document plus attached several pages including my notes (now numbered) PLUS entries for every line I highlighted, underlined etc.
Evidently I only want the text of my comments, not empty entries for each line I have highlighted.
To be clear, I would like to keep the text highlighted / underlined - but I don't need the
entries for that in the appended section. A document of 18 pages otherwise suddently gets 48 pages...(with only
a few added notes).
I have to say I am somewhat puzzled how difficult it is to sort this out. Thought that must be
something rather trival (or am I blind and make a silly mistake)?
To make it more clear here screenshot from what I refer to
Many thanks for any help.
r

Dear Lori,
many thanks for your swift response. Did I understand you correctly - there is no way to keep all the comments (underlined/highlighted/stick notes) in the text and only inlcude the content of the sticky notes at the end of the document? If I filter, as suggested by you, then the underlined/highlighted parts will not show up in the appended pages (that's good) - but they are also not longer visible in the main text (that's bad...).
I would have thought what I am trying is rather ordinary - Highlighting/underlining text and adding comments. And when I print the document, i would like to get the edited text plus the content of the comments (sticky notes). (And not an empty entry for all highlighted/underlined words). I am somewhat puzzled.
Many thanks again.
r

Cannot print document with added barcode text boxes

G'day
I'm adding two text boxes to an illustrator document with Applescript, but when I go to print, ?I get an error 'Cannot print the illustration. The Color Management settings are inconsistent.'
The error message is not error trappable.
I have to barcode thousands of documents a year, and this is a big deal breaker. Is there any fix, please?
Regards
Brian Christmas
try
set printerName to my theLargePagePrinter as string
set paperOptions to {class:paper options, name:largePaperSize}
set jobOptions to {class:job options, designation:all layers} # , print options:printOptions}
set colorOptions to {class:color management options, profile kind:printer profile}
set flatOpts to {class:flattening options, clip complex regions:true, gradient resolution:360, rasterization resolution:360}
set printOptions to {class:print options, printer name:printerName, paper settings:paperOptions, flattener settings:flatOpts, job settings:jobOptions, color management settings:colorOptions}
try
set p to 17
tell application "System Events" to tell process "Adobe Illustrator"
click menu item "Fit to Artwork Bounds" of menu 1 of menu item "Artboards" of menu 1 of menu bar item "Object" of menu bar 1
end tell
end try
set p to 18
say 7
print document 1 options printOptions
say 8
on error errmsg number errnum
tell application "System Events" to display dialog "Error in printing illustrator document. " & errmsg & " number " & errnum giving up after 40
end try

G'day Owen, & W_J_T.
Unfortunately your suggestions did not work for me.
I've tried using the GUI to access the print dialog box, but as usual with Adobe, they've stuffed that up too. What I did find however, that the print dialog box recognised keystrokes, and always defaults to the Printer box when opening.
Also, the Printer box sets itself to a matching item of whatever key is pressed, and so does the Printer Preset box.
So, even tho I can't select any given box, provided I have a Printer Preset set, I can access it by the following (slower) method...
activate
tell application "System Events" to tell process "Adobe Illustrator"
keystroke "p" using command down
keystroke (character 1 of (my theLargePagePrinter as text)) as text
repeat 17 times
keystroke tab
tell current application to delay 0.1
end repeat
keystroke (character 1 of (my theLargePagePrinter as text)) as text
keystroke return
end tell
Note that if you have more than one printer or Printer Preset starting with the same letter, then you'll have to use more than just the first character of your printer name.
Regards
Brian Christmas

Mp495 is printing document with double or shadow letter

My canon mp495 is printing my documents with a shadow/double letters I aligned it and cleaned the roller, bottom plates,& deep cleaned the nozzle and still have same result please help

Hello.
This particular issue would require the attention of our support group. Please visit the following link below to contact our support group for additional assistance with this matter..
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Printing Documents with DI API?

Hi,
Is it possible to print documents (Invoices or Delivery's) with an AddOn SAPBOBSCOM (DI DAPI).
Can anybody post an example?
I didn't find anybody here or in SDK Help (DI API Help)
THX
Thorsten

Hi Thorsten,
There isn´t avaiable a method to print a document yet (hope there is in next version.), but you could do some trick with the UI API, simulating the manual way.
Have a look at this post where Salvador Biot gives a good code for it:
Post Name: "Document printing SDK"
Regards,
Ibai Peñ

Printing Problem with changed page

I have a 2 page PDF document that is created by another program. When I make a change on the second page and save using Acrobat 9 Pro, I am unable to print the page that the changes are on. The messages I get are " Document could not be ptinted" and then "No pages selected to print", even through I have selected the pages to print.

The program creating the file is ReScan. I can print the file before I open with Acrobat. If I make any changes to the file, I am unable to print from Acrobat those pages which had changes made, even thou they show on the monitor fine. If I print to CutePDF Writer instead of directly to one of my three printers (I get the same result with all three different printers) then I can print the CutePDF Writer file.
The fonts I am editing are installed on my system. Not sure what I am doing wrong to cause the program not to print. Don't want to have to use CutePDF every time I need to print. The program should be able to print an edited and saved document.
Any help would be appreciated. Thanks.

Printing document with photos

Have an old HP F300 series all in one. Today tried to print a document and contained photos. When it printed the text was find, but the photo showed double exposure. Tried troubleshooting, but it didn't correct the problem. Can anyone help"

Hey @Nonie210,
Welcome to the HP Support Forums!
I understand that you're experiencing print quality issues when trying to print a photo from your computer on an HP Deskjet F300 series printer. I would like to assist you with resolving this issue today.
Can I have you start by running through the following document:
Streaks or Lines in the Printed Image
Please respond to this post with the result of your troubleshooting after running through the step-by-step document above. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Printing document with table to PDF - file disappears

When I print a document to PDF from either AppleWorks or MS Word, it is saved to the location as PDF and works as would be expected. If the file contains a table, the PDF file initially appears where saved but disappears when I attempt to access it.
The document was initially created in AppleWorks. The MS Word document was translated from AppleWorks.
The PDF file quite literally disappears from the screen. All routine Mac software maintenance is on schedule and all Apple updates for my OS completed to date.

The solution is logical, if annoying.
My Print to PDF problem has been solved. I complained about not being able to save documents containing tables created on AppleWorks as PDF, but the tables were not the problem. The problem was a font within a table. I discovered this when I could also not print the document to a printer. Despite saving as PDF being a print routine, I cannot get out of Save As mode. The document did print to PDF on my mother’s iBook because another font was substituted in the table.
There are several fonts on my PowerBook that will not print, even on a postscript printer that has them on board. That is a separate and largely ignored problem. One of those is the Bookman family. Too bad. I like that family and use it frequently with older operating systems, but OS X refuses to print anything containing that font. I have never taken the time to troubleshoot the problem.
I had already performed the searches suggested to no avail. The point of all this is that font problems that prevent printing a document to a printer will also prevent a document from printing to PDF. The icon initially appearing then going away seems odd to me but probably not to a MacGeek.
Thank you, Mask, for giving thought to this issue. Now, maybe I should invest in a font troubleshooting application.

Print document with images error

I have a problem with Word 2013 document management with images in my project. By using the scrollbars to scroll through the images, they disappear leaving an empty document space ("placeholder") instead. I interpret that are downloaded
from the view. The most serious problem is that this images are not printed afterwards.
Details
The project is made by a "addin" application level on word 2013, created in Visual Studio 2012 (Framework 4.0), from which you can initiate actions based in our business logic. Including a list of images is inserted into the active document.
To insert the images I've tried various techniques (interop, open xml) to verify that my problem is related to a defect in this part. I also tested load different images each time (bmp, jpg).
When I insert images into two documents within the same session of word and use the scroll to move from one image to another repeatedly, some are downloaded from the print view. This process can replicate completely closing and reopening word
2013 and then open these documents afterwards. Opening the documents opens the "addin" too. If I uninstall the addin the effect does not occur. However this addin dont use in the loading process any logical business or load sessions database.
Only load a few basic buttons.
Can anyone give me any explanation or solution to this effect?

document examples:
https://onedrive.live.com/redir?resid=A0312CFD425175AF!108&authkey=!APZWb_nUFHmecNM&ithint=file%2cDOCX
https://onedrive.live.com/redir?resid=A0312CFD425175AF!109&authkey=!AHLP6WG7KGRyaBs&ithint=file%2cDOCX
Add new Addin for word by VS2012, it's indiferent,
I've tried with
a new Addin for Word and the problem persist.

Print document with merged project

I´m using RoboHelp 7.
I have a main project which merges to other projects. When I
print documentation to a Word file I'd like the merged projects to
automatically integrate in the main document, i.e. I'd like to
print one doc file that integrates both the main project and the
merged projects. Thanks in advance.

Can't be done garcia3000 as there is nowhere for a RH project
to know where the master word file is located. The best you can do
is create all the word files and cut/paste the content into the
master project's word file.

Cannot print documents with firefox as my internet connection

When I try to print a document a window to save the document appears and then an error in printing window appears and nothing prints

you can download it on your work computer, locate the file once its done, and take it to your home comp and have iTunes do an install from that. You'll have to direct it to the file though, itunes won't see it otherwise.
Message was edited by: Langdon

HT5437 I can't print document with my iPad in any printer what should I do?

How do I print with my iPad

Are the printers in question supported AirPrint printers? If not, there is no expectation they will work.

How to generate printed document with "continuous" section breaks versus "next page" section breaks?

When generating a Word or PDF document from the HTML help files a "next page" section break is used after each topic. How can I get a "continuous" section break instead?

I've been poking around a bit more. Here's the deal.
New chapters will always start on a new page and have a next or odd page break according to the Start New Chapters setting. If ticked it will be an Odd Page break, else a Next Page break.
Topics within a book will follow the Start Each Topic on a New Page setting. If ticked, each topic will be separated by a page break, not a section break. Else they will be on the same page with no breaks of any type.
Topics not within a book will be followed by a section break.
So section breaks are only created for chapters and topics not in a chapter.
Hope that helps. Please post back if you find otherwise.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Print Document With Indication of Original,Duplicate,Triplicate & Quatrable

Dear Experts ,
Please tell me , How to Design a PLD doucment with Original , Dublicate , Triplicate & Quatrables in SAP 2007B
Regards,
K.V.Shan

Hi KV,
Check Option for printing 'Original', 'Duplicate', 'Triplicate' in PLD thread for solution.
Thanks,
Neetu

Printing issue with Electronic Signatures

In the footer of my document, i place document properties and also use the captioning feature for tables and figures. I have saved it in native 2010 format not in a compatability mode.
When I print my document (paper or PDF) these fields print properly.
After I electronically sign the document and look at the document on the screen, the fields and caption numbers (Table 1-1: Intended Audience) appear correctly. When I print to PDF or paper, the numbers disappear (Table 1-: Intended Audience) and they
also disappear from the screen.
When I close the document and reopen it, the fields are correct. It only changes after the document prints.
Using Microsoft Office Professional Plus 2010 Version 14.0.6023.1000 (32-bit).
(--merging--)
The original document was a 2007 document opened/stored in the 2010 format.
Reproduced with new 2010 document simply by creating two properties:
Template Version - Test - Value 1.0
Template Date - Date - Value 1/25/2012
And doing the following:
Using the default Normal template with calibri as the font
Added a heading level 1 to the document
Added a 2x2 table with Insert Caption including the chapter number based on heading 1 below the table
Added the template version and template date as two lines on the page
Inserted a signature line
Created a footer with the template version, page number aligned center (via tab), template date alighted right (via tab)
Printed without signing and all data was present (Table 0-1: Test)
Signed the document and printed. The following was missing:
The template date in the footer.
The table label was Table 0-: Test
The template date was present in the middle of the document

Hi,
Is this problem only affect Word program with Electronic Signatures?
Please try to test Printing with different printer drivers.
If the Word printing problem occurs only when you print documents with a certain font or a certain type of graphics image, try to print to another printer.
If no other printer is available, contact the manufacturer to find out whether there is an updated version of the driver or a different driver that works with your printer model.
You may also follow other methods in this KB article troubleshoot print issue in word:
http://support.microsoft.com/kb/826845
Best regards.
William Zhou
TechNet Community Support

Print document with changes

Similar Messages

Maybe you are looking for