Print inventory posting after 'reconcile'

Hello
In the transaction inventory/inventory transactions/inventory posting, you post the difference after counting. In the SAP help files is written that you can print the screen before you select the button u2018reconcileu2019. We want to print the transaction automatic after we select u2018reconcileu2019.
The option by this transaction is not possible in the document settings and the print references. B1Up could be a solution, but is it also in standard SAP/Crystel Reports possible?
Edited by: Daan on Nov 3, 2011 4:59 PM

Hi,
There is no such standard report yet although it would be nice to have it.
Thanks,
Gordon

Similar Messages

  • Can't print in PSE11 after upgrading to windows 8.1

    I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

    I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
    Tracy Ferreira 2607 Woodruff Rd.
    Suite E-126
    Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com  
          From: hatstead <[email protected]>
    To: Tracy Ferreira <[email protected]>
    Sent: Tuesday, March 10, 2015 1:58 PM
    Subject:  can't print in PSE11 after upgrading to windows 8.1
    can't print in PSE11 after upgrading to windows 8.1
    created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • A better way? Need to reinstall printer on network after shutting down computers.

    HELP!
    I have a HP 3310 All in one.  It is oh, 4 years old or so and this has bugged me the whole time.
    Basically, whenever I power down any/all of the computers on my network I lose the printer when I power back up.
    My first fix was to just leave everything powered up all the time, worked great until the power went out.  I talked to someone in tech support and they had me uninstall and reinstall everything.  I got it up and running but I definately do not want to do that everytime I want to print something! 
    My second fix was to hook up directly to computer with USB cable, this was my last solution, I could only print off the computer wired to the printer though.  One of the reasons I bought this printer was I wanted to be able to do so across the network, wirelessly or not.
    My network now includes 3 computers and a network backup drive, a laptop (when I use it, is wireless connection) and this printer.  I have a Dlink DGL-4300 router tying everything to my cable modem. 
    My current bout of frustration stems from recently upgrading 2 computers with some new hardware and new OS, I moved to Win7 on the 2 new rigs, and have Vista on my other desktop, the laptop runs XP but is not used very often.  It does login to my network flawlessly each time I turn it on though.
    I am looking for an "easy button" here.  Setting up networks is something I can do, right up until I hit my first problem that a wizard cannot fix.  (which seems to be any problem that pops up)
    My printer shows that it is connected to my home network with excellant signal strength ( it is only about 6 feet from the router)  my desktops are all connected and can see each other, I can share files off the vista computer with one of the win7 computers but not the other ( a different problem for another web forum).
    My printer does not show up in my network neighborhood window and no number of reboots of printers or computers seems to get things reset so that any of the computers will "see" the printer.  Not sure if this is router related or not.  I simply want the printer to reappear in my network when things are turned back on.  The win7 computers said they had successfully installed the printer after I downloaded the latest software from here for win6 64 bit.  I did not in fact print anything at the time because they said the printer was found and installed correctly, now the printer cannot be located any longer.  HP solution center claims the printer is disconnected, but does nothing to assist in re-establishing a connection.  The wizards cannot locate the printer, manually trying to direct the computers to the printer fail.  I have set up a PW protected wireless network to try to limit prying eyes and leaches from accessing my network and I wonder if somehow this is messing me up. 
    I am lost, completely!
    In summery:
    Dlink DGL-4300 router
    Two computers running Win7
    One computer running Vista
    One laptop running XP
    One HP3310 All-in-one printer
    When setting up the win7 systems all defaults were selected, I tried to do nothing funny from stock install.  Somehow, I still ended up with one computer not being able to access files on Vista computer.  None of the computers can see the printer though. (this after powering down all computers and turning them back on when needed, router has not been cycled on and off)
    Thanks, hopefully someone can explain this to me.  I just do not want to have to reinstall the printer after every time I turn a computer off and back on again.

    On many older HP printers the software keeps track of the printer by IP address.  If that IP address changes (due to power outage, the printer re-logging on to the router after being moved, etc), the software can have a difficult time finding the printer.
    How comfortable are you in configuring your router?  First, print a Network Config Page from the front of the printer.  We can go from there.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Windows Server 2012 Standard - HP OfficeJet Pro 8600 Plus printer not working after promoting to Domain Controller / AD Services

    An associate and myself installed the built-in drivers for the HP OfficeJet Pro 8600 Plus multi-function (network) printer on a Windows Server 2012 Standard server installation and everything worked fine whenever I want to print anything directly from the
    Windows Server machine (there's a reason for this, so please understand that ;)  ).
    We were able to print without any problems from the Windows Server 2012 machine, using the drivers from Microsoft.  Mainly, because HP has not listed any specific support for Windows Server 2012, only Windows Server 2008 R2, however, the drivers that
    came with Windows 2012 seem to work very well.
    PROBLEM: I later had to promote the Windows Server 2012 to a Domain Controller, and created the Active Directory configurations, even enabled the Print Services.  After doing all of that, the HP printer will not print anything.  It's like all print
    requests directly from the Windows Server go to Nil.
    Has anyone encountered a problem like this before? The only thing I can think of is that after perhaps something affected printing directly once we promoted the server to being a DC, and added other features / roles.  I even tried installing the
    HP drivers for Windows Server 2008 R2, and the results are still the same...nothing prints.  Trust me, the printer is set as the Default Printer and even when choosing to print, we make sure the HP OfficeJet Pro is selected, and is on, as other Windows
    Client PC's can print to it directly.
    Does anyone have any suggestions we could try?  Thanks in advance.

    While it is quite a while since this was posted - I can concur a similar issue exists.
    We have spent the better part of a day trying to work out why other HP printers work fine but our 8620 prints are not printing and going to Nil.  The print server is hosted on a shared DC.  Comparing to the initial posters details, for some reason
    it seems to be most commonly related to the OfficeJet Pro 8600/8610/8620/8630 series printers.
    I ended up doing a print server migration from the domain controller to stand alone host and all printers now work from a single server rather than a mix.  Domain controller OSes varied from 2008, 2012, 2012 R2 (tested with multiple) and only after
    all of those failed then tried a stand alone server os machine as a last resort which worked fine.  Printing directly from Win 7 / 8 /8.1 clients to the IP always worked.

  • Pdf reader X has problems with small pdf and printer with post script driver

    Hi friends.
    I have installed new Reader X and then i saw that, when i print a very small pdf with about 50 kb and i print it on a Laserjet 4000 printer the printer has problem with the amount of data that reader 10 produces.
    When i install a Postscript driver for the printer my computer makes up to 3.5MB printer data from a 50kb pdf.
    When i install a PCL driver for the printer my computer makes only 350kb from the same 50kb pdf file!!!!
    When i install Reader 9.3 the 50kb file becomes also only 350kb on the printer with post script driver, and i can print without problems also.
    my printer has 8 MB Ram and that should be enough for 3.5MB printer data.
    But when i print the pdf with 1 side only, the printer created a side who is only filled with 50% of the text, then there comes out a second page with the message.....not enough memory in the printer.
    i can not change the postscript driver to a pcl driver cause our ERP System can not handle printer with PCL drivers.
    Can someone help me please.........are there settings in Reader X who can solve my problem ???
    Thank you very much for help!

    put ? after rwcgi60.exe

  • Reverse the inventory posting to earilier date

    hi,
    we have createed some deliveries sucefully with eralier dates i.e dec 2008,why because corresponding sales orders r created on dec '08, but for one delivery by mistake GI Date has taken as current date ie jan 2009, so that we have reverseed the PGI,but inventory posted in jan 2009, is there any posiabilty of posting the same invetory in dec 2008.Can anybody help me.
    Thanks in advance

    Hi vijay,
    In SAP the inventory is kept per period.
    If you did GR in Dec 2008 and then did GI in Jan 2009, there is still stock in Dec 2008
    You can check table MARDH to see historical inventory
    Suppose you did GR of 1 EA in Dec 2008. At the beginning of Jan 2009, you have
    Dec 2008: 1 (MARDH)
    Jan 2009: 1 (MARD)
    After you did PGI in Jan 2009, you have
    Dec 2008: 1 (MARDH)
    Jan 2009: 0 (MARD)
    After you cancel the PGI in Jan 2009, you have
    Dec 2008: 1 (MARDH)
    Jan 2009: 1 (MARD)
    So theorectically, you can post PGI in Dec 2008 because you have stock in that month
    If you post PGI in Dec 2008 now, you will have
    Dec 2008: 0 (MARDH)
    Jan 2009: 0 (MARD)
    But it depends if you accounting period is closed for Dec 2008 or not
    If not, I think you can post the PGI in Dec 2008

  • Delivery Receipt Printing before Posting

    Hi All,
    We are facing a issue on SD Delivery Receipt which is configured in v/34 but it is printing before posting also ( I mean before Post Goods Issue ). For making it to print only after PGI I should change in program or whether it is done is the configuration part. If in Configuration please let me know the Tcode and how we can acheive the same.
    Thanks in Advance.
    Best regards,
    Shahid Malayil

    Hi Manoj,
    Thanks for the help.
    I changed it to 1 in V/36 but still it is printing before the PGI and after the PGI.
    I don't want to print it before the PGI. Please help me..
    Best regards,
    Shahid Malayil

  • Formatted Search on Inventory Posting

    Dear Experts,
    I have a FMS on inventory posting distribution rule, its supposed to display the distribution rule automatically for the items, without human intervention.  How can I set this to auto-refresh ?  since when using this form virtually no column is normally touched apart from the reconcile button.
    Edited by: Roc on Apr 8, 2010 4:27 PM

    Hi Gordan,
    we have upgraded SAP B1 2005 to 2007 - we are using old query for formatted search for items in marketing document - can in that cancelled items also reflecting - can you please correct that query where i dont want to reflect cancelled items.
    SELECT T0.[ItemCode] AS 'Item No.', T0.[ItemName] AS 'Item Description', T0.[UserText] AS 'Item Details', T0.[OnHand] AS 'In Stock' ,T0.PrchseItem,T0.SellItem FROM  [dbo].[OITM] T0  WHERE (T0.[UserText] Like N'%[%0]%'   ) AND  (T0.[UserText] Like N'%[%1]%'   ) AND  (T0.[UserText] Like N'%[%2]%'   ) AND  (T0.[UserText] Like N'%[%3]%'   )
    Thanks

  • Apple Tech Support and Printer/HDD issues after 7.1

    Has anyone spoken to Apple tech support about the hard drive and printer problems after updating the firmware to 7.1? I plan on calling them later this evening and will post after that

    Has anyone spoken to Apple tech support about the
    hard drive and printer problems after updating the
    firmware to 7.1? I plan on calling them later this
    evening and will post after that
    I plan on calling them tonight, as I am sure they want me to be at the same location where the equipment is located. Someone told me that tech support personnel are available in "large" numbers only before 9 PM Eastern, with an average wait of 2 minutes.

  • Cannot print on usb after maverick upgrade

    cannot print on usb after maverick upgrade

    Chef jonathan wrote:
    apple when will I beable to print? 
    These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.
    Apple involvement. Apple may respond to questions but does not formally provide technical support on the Site. Any information that is provided by Apple or Apple employees is offered on an "AS IS" basis without warranties of any kind.
    Ask your question in the Product Feedback area.  Otherwise............... 
    When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
    CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
    CLICKY CLICK-----> Help us to help you on these forums
    ***This will help in providing you with the proper and/or correct solutions.***

  • Prevent UD without inventory posting

    Dear friends,
    How to prevent usage decision with out Inventory posting  (ie. stock posting )?
    Regards,
    krish

    Hi
    Use User Exit
    QEVA0010 UD: Usage decision check
    Logic will be it will check wheather stock posting is done.
    or
    In selected set use auto stock posting after UD for UD code.
    Regards
    Sujit

  • Extra Found HU posting after Write Off

    Hi Experts,
    In one of my scenario, I need to post the extra found HU's in the system after completing the Inventory PRocess ( after WM and MM write off).
    Is there nay way by which I can get the extra found HU in the my current stock now??
    Thanks in Advance.
    Shailendra

    Hi,
    If the table is BKPF then the object is BKPF, FIPP or similar. If you look in transaction SWO2 and find object BKPF it is under the area "Financial Accounting". If you then goto PFTC and enter Workflow Template for Task Type and then F4 on Task and select Structure search, goto the area Financial Accounting and you will see all the workflow templates available.
    Regards,
    Eddie

  • Item cost not found for one or more items - Inventory Posting

    Good Day Mentors,
    My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items".
    The specific Message ID from SAP's System Message Log is 10001287.
    I found a similar post which addresses this error here.
    But unfortunately it did not help me solve my user's problem.
    I already checked if the items had a defined "Item Cost" in the Item Master Data Inventory Tab, and they all have "Item Cost" defined.
    I'm not sure if this will help, but below is the Inventory Audit Report of one of the items that is throwing the "Item cost not found" error.
    I am not a business consultant neither am I literate in accounting, so thanks for the patience.
    SAP Version: 9.0 PL5
    Valuation Method: Moving Average
    Thanks in advance!
    Sean

    Hi Augusto and Raviraj,
    I've already verified in our production database the points you made:
    - Is the "Manage Item cost per warehouse" selected in the Basic Initialization Screen?
    YES
    - Is the "Manage Inventory by Warehouse" ticked/checked in the "Inventory Data" tab of the "Item Master Data" screen?
    YES
    * I apologize for not have been able to give this information upfront.
    Anyway, the database only has one warehouse at the moment.
    I've checked the items, like the item in the screen shot above, and it does have an item cost.
    Below is the screenshot of the sample item from my original post,
    Thanks in advance!
    Sean

  • Print a report after transaction

    Hi,
    I want to know if there is any solution to print a report after a transaction (after commit).
    when i do any modification in a table, i want to print data that have been modified.
    thanks in advance for your helps.

    Have you given thought for Oracle Alert.

  • Hyperion IR 9.3.1 - Issue in printing the report after exporting it to pdf

    Hi All,
    I am facing a problem in printing the report after exporting it to pdf format using Hyperion Interactive Reporting 9.3.1. I have set page size of report section to 11X17 inch landscape. Now I am exporting this report section to pdf. Report gets exported to pdf with size 11X17 inch landsacpe. But when I am trying to print this pdf it is shrinking the documnet size to A4 size paper and printing it rather it should print it on 11X17 inch paper size. Please suggest if there is fix available for this issue.
    Thanks
    Ujjawal

    "File &gt; Print Setup &gt; Paper &gt; Size" on PDF.
    I think this issue is only to do with the printer and not IR.
    I think the question now is "Can your printer print 11X17 pages or not".

Maybe you are looking for