Print out Lined Paper?

Hello,
I'm wondering if something is possible with pages '08. Is it possible to create a document that looks liked lined paper? I.E., if I make a list, it is on a background (or in a table) that looks just like lined paper so when I print it out, I have an entire sheet of lined paper + what I've typed.
Thanks for any help,
-Grey

Hi grey1618,
Welcome to Pages discussions.
There isn't a template that I'm aware of but you could try at http://iworkcommunity.com/
Also, you could create your own template. In Pages go into Page Layout mode or Word Processing mode. Create a table with one column and 25 rows. Adjust row height to the look you're after, add more rows if need be. It will take some futzing around to get it as you want it then lock the table. With the table finished and locked overlay it with a Text Box, that's where you'll type. If you want that document for future use save as a template.
Hope that gets you going in the direction you want. Do let us know.
Again, welcome to Pages Discussions, have fun here.
Sincerely,
RicD

Similar Messages

  • HP 4215 all in one 'printer out of paper' error message

    I cannot clear out a 'printer out of paper' error message that is prohibiting me from printing further documents.  Paper is in holder accurately, I've even copied to ensure it is feeding.
    My 'wonderful' son had a 20+ document sitting in the queue that I am sure triggered this error.  I've got the queue cleared but still cannot clear the error.
    Please help!!??!!

    I'm having the same problem...but hey, isn't it wonderful how quickly HP support jumps on these issues and helps us fix them????????

  • Photosmart 7160 Duplex Printing Out of Paper Side 2 Intermitte​nt Windows 7 USB

    The printer works fine on XP but 75 percent of the time it fails on Windows 7. I have a removable drive so I can switch back and forth between XP and Windows 7. Symptom: Let's say I want to print 10 documents. Each document is 1 1/2 pages long. I command it to print 10, duplex, fast draft, copies. Usually the first document will print double sided. The second document will fail to reverse the paper after printing the first side. The paper will continue forward to the end of the output tray. Since the paper did not reverse and go into the flip over device, I now get and Out of Paper error and must manually hit the OK button on the printer. It then feeds the next (!) sheet of paper from the input tray. So it takes me 10 minutes to print the 10 documents with only 2 or 3 of them actually being double sided. It would normally take less than 2 minutes for 10 duplex sheets at draft quality. When I boot from my XP drive everything works fine. It seems like the motor that reverses the paper never actually goes into reverse. I have removed the flip over device and cleaned everything in sight including the contacts. There are about 30 drivers listed in Properties. The first one says HPD7100T.GPD 6.10.2009 .

    AND forgot to say,
    there is NO OPTION to SET MANAUL DULPEX (in win 7 drivers)
    I also readed your
    Vista / Win 7 Duplex Printing Troubleshooting Guide 
    but no help with that

  • PDF files that do not print out on paper but are OK on screen

    Print PDF files when produced in ADOBE XI from  Excel 2010 worksheets
    The PDF files appear ok on the screen but do not print out all of the text on paper.
    Formating is recognised and printed oK but not text.
    Font segoe UI size 9 point - colours used default, blue and brown.  What little that is printed shows all colours OK but not all body of text
    This problem has been reported to me from dozens of my Clients and I have the same problem when printing hardcopy.
    Can anybody help ?

    I tried a font change on an abstracted part of the original file.  I selected Ariel - the majority of the page printed - headers and footers partialy printed.  But it is a step forward thank you. 
    My choice of Font Segoe UI (True type) font as a default was after reading an article which stated that Segoe and another font, were fast becoming a "Microsoft computer standard font". 
    A further question falls out of my problem is why is there no problem when a client of mine converted the original Excel Workbook with Adobe 9 and had no such problem ?.
    I do not have ADOBE 9 and cannot test it myself - but why should it work with an older version of ADOBE ?

  • Printer out of paper ... start all over

    Hi!
    OES 11 SP1. Could be printer or driver or ... related, but maybe someone can shed a light. Just one of our "customers" complains, that when printer is out of paper and paper is added then printer start all printing over again. Some settings ... we missed?
    More thanks, Alar.

    NovAlf,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Won't print from iPad - message: printer out of paper

    I just bought an HP Envy 7645. I set up printing on my home network through my MacBook Air (Yosemite) computer and it prints fine from the computer. But everytime I try to print from my iPad, I have failed. Air print finds the printer on the network, and sometimes it has stated it was connected and sending the document to the printer, but nothing reaches the printer and nothing gets printed. But now when the print dialog appears it states that the printer is ut of paper - but there is paper loaded in the printer and I immediately am able to print from my computer. Now when I open the printer preferences on my computer,  it says the tray is out of paper, but then I can print from the computer without problem.How can I solve this? Now on the MacBook in the dialog box it claims it is out of paper, but then prints a document.I have not been able to photocopy.THanks for any help. I have spent a couple of hours setting up this printer and trying to make it work.

    Hi Alameda, From what i understand is you are getting out of paper error message when printing from iPad using the AirPrint.Can you help me with the application from which you are trying to print. Is it a Photo or a document that you are trying to print. First lets do a sequential boot, Turn off your iPad, Router and Printer... wait for 30 sec and Turn it back on first Router, Printer and iPad.Open the input tray on the printer, make sure you have paper loaded correctly and the guides are adjusted appropriately.When closed you would get the change paper type message, make sure correct media is selected on both regular and photo tray.(If you just have media on regular tray, try to load something on phototray for testing)Try to Print and see if it works. If fails can you try downloading the HP ePrint from the AppStore and try printing with the same. Thanks...  

  • Continuation printer "OUT OF PAPER"

    I did the HP doctor, i did the troubleshooting.  I have windows 7 hp pavilion slimline 64-bit ...

    Answered in this post.
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/6520-e-all-in-one-photosmart-printer-sa...

  • PAPER TRAY SUCKS. CANNOT PRINT OUT PHOTOS, TRAY ONLY ACCEPTS PAPER FROM BOTTOM TRAY. GRRRR.

    My BRAND NEW (One week from delivery) no longer prints out photos.  It printed out photos several times but 3 days' ago it stopped.
    The paper tray is malfunctioning.  Each time I try to print out a photo (remember, it's been done several times until a few days' ago) THE TRAY WILL NOT ACCEPT PAPER FROM THE TOP TRAY!! 
    SELECTED PHOTOS PRINT OUT ON PAPER FROM BOTTOM TRAY ONLY!!   MY INK AND PAPER IS BEING WASTED AND SEVERAL OTHER POSTERS ARE EXPERIENCING THE SAME ISSUES WITH THE HP 6520!
    Is one of those infamous 2-hr. long marathon phone calls to Tech Support in India the ONLY way one can sensibly have an HP issue resolved? 
    This is ridiculous!

    Hi,
    Sorry to hear you are having problems printing. What device are you using to print?
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • HP Envy 5640 "Out Of Paper" FALSE MESSAGE

    I have "Out of Paper" false message. When I pressed "PRINT" on my Iphone/Ipad, the printer still printed for me. BUT the menu on Iphone/Ipad did not provide me THE RANGE, so I had to print the whole docemunent. I JUST WANTED TO PRINT A FEW PAGES with "RANGE OPTIONS" By the way, I tried everything: Turn On/Turn Off, remove the paper tray, put in brand new paper etc . I still gave me the false message "PRINTER OUT OF PAPER"

    Hi , Welcome to the HP Support Forums! I understand you are getting an 'Out of paper' error message on your HP Envy 5640. You were able to print from your iPad and you tried some troubleshooting steps but the error message remains. Let's go ahead and try a Hard Reset: 1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.
    2. Unplug the other end of the cord from the power source.
    3. If there is a power module on the power cord, disconnect one end and reconnect it.
    4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
    5. Plug the power cord into the back of the printer.
    6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
    7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
    8. Connect any other needed cables to the printer.I would like you to go ahead and continue troubleshooting here, I understand there is paper in there, it may just need to be cleaned and reset: An 'Out of Paper' Message Displays on the Control Panel and the Printer Does Not Pick Up Paper. Let me know the outcome, is the error message gone. As for the printing options available on the iPad, take a look here: Printing Over a Wireless Network with Apple's AirPrint FAQs PAGE RANGE: I hope this helps. 

  • I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

  • Can I print out the contacts in paper?

    Can I print out the contact from mobile in paper?

    stong2011 wrote:
    Thank for your info. Yes, I can't find this function in ovi suite. So I'd try to other program which can sync with these datas can print it out.
    ..As mentioned above, whats your phone model ? Is it compatible with the PC Suite ? If 'YES', then you do not need anything else...

  • Error message on print window for Vista--"out of paper"--I just loaded paper...?

    error message on print window for Vista--"out of paper"--I just loaded paper...?
    What can I do to get it to print?

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model can help out a lot.
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Laser Jet Pro MFP M476nw printing lines of nonsense until it runs out of paper

    I have a Color LaserJet Pro MFP M476nw, and it has begun printing out pages of nonsense symbols until it runs out of paper.  This is particularly bad when I print from a website, sometimes from emails, etc., and it is wasting tons of paper.  I am extremely dissatisifed with this printer, and it is not even a year old yet.  I have tried turning it off and then restarting it, but the problem comes back.  Is this normal for this particular all-in-one?  I bought it instead of a Brother, which I had last, and expected better for my money.

    If the output is repeatable (i.e. exactly the same when reprinting the same document, using the same driver, to the same device), then it is likely that it is caused by a driver (or driver settings) fault.
    There may be a more up-to-date driver available, or (depending on the printer model) you may perhaps be able to switch to a driver using a different Page Description Language (i.e. PCL5 or PostScript or PCL6 (the 'marketting' name for the PCL XL PDL), depending on which you are currently using).
    If the error(s) is/are random, they are much more likely to be the result of intermittent corruptions of the generated print stream between the workstation and the device (check cables, ports, switches, etc.); it could also possibly be an intermittent problem with the printer itself.

  • Officejet Pro 8600 Premium won't print cardstock - error message of "out of paper" appears

    My printer won't print cardstock, the error message says "out of Paper".  I have tried 3 different types of cardstock and it won't accept any of them.  It will print on plain paper.  Is this machine defective?  HELP...URGENT
    I must be able to print cardstock.  The computer was just set up today...it is brand new and purchased directly from HP.

    After trying a lot of different things, for some God-only-knows reason, this is the trick that worked for me. This is really more of a hack than a true fix, but I'm not picky when it's 2 AM and I don't have any other options:
    (1) In the paper tray, alternate one sheet of the cardstock paper with one sheet regular plain paper. Make sure the tray is full, but not over-full. (This HP help article says not to do that but... whatever.) 
    (2) In the Print dialogue box (however you can get to it) select the "Plain Paper" preset (not "thick paper" or "cardstock"). I had it on "Best" as you can see it the screen shot, but I don't think this is important.
    (3) I only had a single-page document, which I needed to print 30 copies of, so I inserted a blank page as a second page in the document file (a pdf).
    (4) I then made sure "Collate" was selected in my print settings.
    If you have a multi-page document, maybe you will need to insert a blank page every other page... which sounds like a pain, and I feel for you.
    Note: You'll need to monitor the printing closely - if ever the printer pulls two pages through instead of one, you'll need to pull the paper tray out and add a piece of paper so it's alternating correctly. 
    With this, I was able to print multiple copies without ever stopping. After a full day of fighting with the printer (which may or may not have included sacrifices of limbs under a full moon to the printer gods... just kidding) this was like magic.
    Hope this works for you - or other people who read this thread. This is a really frustrating situation.
    PS. Before I did this, I also did a full reset of the printer, which included:
    1. Turning off the printer and unplugging it for a full minute
    2. Printing 100 blank pages
    I have no idea if this helps, but if this hack isn't working for you, this "reset" is worth a try.

  • Printer has paper, but computer says it is out of paper and won't print from web

    I am having trouble getting the computer to recognize that the printer has paper. The printer will print copies that I put in it, but when I want to print from the web, it won't let me do it; it just tells me that the printer is out of paper. I printed a number of pages from the web yesterday with no problem at all. I have an HP Deskjet F2430.
    This question was solved.
    View Solution.

    I was trying to print off some material I had looked up on the web. When I saw what I was trying to print was going to be 40 pages, I did not want to continue printing it, and I did not know how to stop the printing, so I just pulled out my paper from the loader thing. I have since put paper back in the loader, but now my printer will not print anything, and says I am out of paper. I have tried and tried to fix this problem, and I really need to be able to print stuff, so I am pretty frustrated with this. I am a senior citizen and will admit that I am not all that astute with tech stuff. I would certainly appreciate some guidance with my problem. Thank you very much.

Maybe you are looking for

  • Text in variable selection

    I have an user entry variable on infoobject, when we run the report on web , on the variable screen , to select the values of the variable/infoobject only key is displayed but the description is not. Though in the properties its made key and text for

  • Can't start iDVD...

    I've seen similar questions in the forum here for this problem, but nothing works so far... I can't get iDVD to work correctly. I start it up, select & name a new project (Standard 4x3), and it brings up the 2 pane window and then hangs. In the past,

  • No authorization for object K_VRGNG, action 16, fi,Message no. DB000

    Hi, User got error message while doing GR . Error message : Cost allocation Document was NOT Posted due to  No authorization for object K_VRGNG, action 16, fi Message no. DB000 Regards....

  • Delay in broadband activation

    I ordered BT broadband on the 24th November I was given the activation date of the 15th December, originally I was supposed to have an engineer out on the 15th however the day enforce this I checked the online status of my order and it said the engin

  • Ways to show only the non-end dated portofolio manager.

    Hi All, I have a fund raising application (Raiser's edge), and I have to show each donor along with his/her primary portfolio manager.  Each donor could have more than one manager but there could be only two current manager (primary & secondary).  If