Print Output problem in ECC6

Hi Friends,
I am getting print output problem in ECC6.
In VF03 I am giving issue output for invoice printing. Whenever I am presseing issue output one screen is coming for selecting output type. I have selected one output type and I pressed print preview then in print preview one item and corresponding amounts it is showing properly for the first time. But the problem is after the print preview if I come back and again if i press print preview button values are not getting refreshed and same item is repeated for twice and the amounts are also getting added. Again for the third time if i come back and again if i press print preview one more item is getting repeated and the amounts are also getting added which should not suppose to happen.
What could be the problem and how to resolve it?
Rewarded,
Steve

Hi,
clear those variables in the program .
Regards,
Bharat.
Reward points if helpful

Similar Messages

CS3 print:output:color:separations problem

I have InDesign CS3 running on XP SP1. When trying to print an .indd file, the separations option under file/print/output/color is grayed out. How do I set this so I can print separations?
Thank you.

The AdobePDF virtual printer is a postscript device, so if you have a full version of Acrobat installed you can print seps to PDF, then print the PDF.

There is no printer output when using the PrintOut method

I have a VB6 app with CR XI, and a customer found a situation that when printing a report directly to the printer using the PrintOut method, there is no printer output or error message.
Some reports using the same code print normally, but a report that is preceded by another print call, presents this behavior.
And when the output is directed to the screen, we can see the report.
Could someone give me an idea of what is the problem?
Thanks,
Isis
SP - Brazil
The code used is below:
                   Set rpt = applic.OpenReport(App.Path & "SEFoto" + TipoRPT + ".rpt")
                   rpt.FormulaSyntax = crCrystalSyntaxFormula
                   rpt.FormulaFields.GetItemByName("Empresa").Text = "'" + Company + "'"
                   rpt.FormulaFields.GetItemByName("Idioma").Text = "'" + Idioma + "'"
                   rpt.FormulaFields.GetItemByName("Versao").Text = "'" + Versao + "'"
                   ' ... Some lines to compose the selection formula
                   rpt.RecordSelectionFormula = Cond
                   ' To evaluate the image length:
                   Arq = rsTMP3!FT_Arquivo
                   ImageScaling = FatorDeReducao(Arq, "F")
                   ' To reduce the image length:
                   AchouOLE = False
                   For Each oSection In rpt.Sections
                       For Each oObject In oSection.ReportObjects
                           If oObject.Name = "PictureFoto" Then
                              Set oOleObject = oObject
                              AchouOLE = True
                              Exit For
                           End If
                       Next oObject
                       If AchouOLE Then Exit For
                   Next oSection
                   With oOleObject
                        .Suppress = True
                        .XScaling = ImageScaling    ' 0.5 = 50%, 1 = 100%
                        .YScaling = ImageScaling
                        .Suppress = False
                   End With
                   Aguarde.Show 1
                   If DestinoRel = 9 Or DestinoRel = 1 Then ' Padrão ou impressora
                      rpt.PrintOut True              ' <<<---- Here using true or false nothing happens
                   Else
                      PrintRPTtela rpt, "Fotos"   ' <<<--- Here it works fine
                   End If

Hi Isis,
Not sure if you have applied any service Packs to CR? If please do so and test again. Then you can upgrade to CR XI R2 for free, use your XI Keycode and download Service Pack 4 from this link:
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
You'll find the distribution files for your app also from that same download area.
If you don't want to upgrade to XI R2 then download all patches from XI and test again. This issues rings a bell that it may have been fixed.
Thank you
Don

Windows 7 - HP Laserjet 8500 print driver problem

I have tried everything imaginable to correct this HP 8500n print driver problem with no success, please help!
I cannot correct or get rid of a reoccurring “Incompatible Print Settings” error dialog box message that repeatedly states that “There are one or more conflicting settings. One of the settings is: Output Bin: Mailbox 1, Accessory Output Bin: Not Installed”. The radio button options are “Restore my previous settings or Keep this setting, and I will change it later”. This same dialog message repeats 13 times for all the other various conflicts each time you click on printer properties to change to 2 sided printing or any other printer settings. This printer does not have any of these features attached or set into it.
I am a volunteer that manages a number of computers on our small church LAN, 2 computers operating on MS XP-SP3, 2 on MS Windows 7 Home Premium and my 2 problem computers that came pre-installed with Vista Home Premium of which I have performed an HP OEM upgrade to Window 7.
I have isolated this print driver problem to the Vista operating system and even when computers are upgraded to Windows 7 does not correct this driver error. I have also tried every possible print driver variant of the HP 8500, HP8550, PCL, PS to include the Microsoft versus HP versions with no success. In each case I get this error yet neither of the XP computers or the computers that had Windows 7 as a original operating system have no problems with their print drivers for this printer.
Yes, I have repeatedly searched and upgraded the operating system and print drivers. In desperation I have even tried to find the correctly behaving Windows 7 print driver and transfer it to these Vista upgraded to Windows 7 machines. However I could not isolate the driver location.
The only thing I can conclude is that this errant HP print driver was resident within Vista and remains resident even after a HP OEM Windows 7 upgrade. Additionally, all of these computers are configured to access this printer via its static IP address on the network. The XP computers are 32 bit, all of the Vista upgraded to Win 7 and OEM Win 7 computers are 64 bit machines all with respective OS.
Can anyone please help me correct this problem?

Hi,
Unfortunately I can't see your uploaded image yet as it is awaiting approval from HP.
From what I can see you are correct that HP does supply drivers for this printer and that the drivers for your printer are already included with Windows 7. On the machines affected, try the procedure below to see if it helps at all
Next download revo uninstaller on the link below and install it.
http://www.revouninstaller.com/download-freeware-version.php
Disconnect the printer from the PC.
Run Revo and see if it finds any HP Printer Software installed. If it does, right click the software icon and select uninstall. During the process you may be asked to delete registry entries. If you are, just select all and click delete. Do the same for any left over files and folders. Once completed, reboot the PC.
Re-connect your printer to the PC and follow the guide below.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
If this helps you will need to repeat the process on each of the affected machines.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Color management settings for the best print output

Color Management while Printing has been one of the challenging areas which has been discussed a lot over user forums and has been a painful area in terms of clear understanding while taking print outputs.
Here is an easy-to-understand KB (Knowledge Base) article ‘Color management settings for the best print output’ to help you get the best from your printers using PSE and bridge that knowledge gap.
This article explains color management in Photoshop Elements, how to get better prints, and addresses some of the following issues like horizontal/vertical streaks in print output, too dark or too light print output, ICC profile problems and Color differences between prints from PSE and other applications.
Thanks,
Garry

Thanks Noel.
Yes have shared in PSE forum as well. But I usually drop such posts on PS General forum so community moderators as well as our power users who mostly use both PS or PSE or are aware about can communicate to their students, audiences etc.
The idea is to reach out the message to as many as folks via relevant forums. Most of my otehr posts have found mentioned only on PSE forum.
Thanks for the feedback Nice to hear such a great feedback within 5 mts of publishing
Regards,
Garry

Email Sending of Purchase Order Created versus Print Output

Dear All,
I have been successful in sending the Purchase Order created as a PDF Attachment in email.
The problem i am facing is in the formatting of the attached output.
The attachment has different bold characters as compared to the print output of the PO , though both the outputs are using the same sapscript.
I am not able to find the reason for the difference.
Only because of this reason, my delivery is on hold.
Please guide me on how to find where the difference could be and how to rectify it.
Thanks & Regards,
Bhavika

Could you tell us which fonts you tried?
What device type did you choose? (SPAD transaction, select your output device to determine the device type)
Could you upload TrueType fonts (one normal, one bold) with RSTXPDF2 program (do not tick "do not embed font in PDF" option so that the font is embedded in the PDF file)?
Did you make sure that your font is not converted to another one? (SE73, printer font, choose your device type, click conversion button, and check what is the converted font)

Purchase order print priview and spool print output are different.

Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview the TAX VALUES value is 120 coming..
when i am giving print with spool.. the amount value is showing TAX VALUE
is 443..why it is showing wrong..
this is for perticular output type.
why TAX VALUES are showing different in print view and
spool print.
help me.
regards,

Hi Neil,
thanks for your reply.
but the valiadtions are happening in standard functional module PRICING.
it is realted script(medruck)...but there is no code point for spool or printer side..
and the issue is realted one PO OUTPUT TYPE..
it is sap standard debugging... when i am debugging the functional module PRICING.
the values are coming dynammically.
help me.
regards,

Printer settings problem

A postscript printer driver is installed in Mac OS 10.4.8. Some printing settings have been saved as a preset and make it as default. When a Indesign file or Adobe applications file is printed to that postscript printer,I should press "printer" button to ensure the preset is selected and then print the file.Otherwise, those print settings stored as preset will not be applied. I tried to print other files, e.g Microsoft Word file, no such problem occurs.
Any ideas on it?
Regards,
Vincent

Hi,
have you checked the following notes?
SAP Note [821519|https://service.sap.com/sap/support/notes/821519] - Front-end printing with control technology
SAP Note [791747|https://service.sap.com/sap/support/notes/791747] - Linux: Printing from the SAP System (access method U)
SAP Note [190218|https://service.sap.com/sap/support/notes/190218] - Linux: Print output from R/3 (acc. method L)
Thanks,
Hannes

Issue in purchase order print output

Hi All,
When we issue a print output from Purchase order the special characters like u201C , u2018 , & etc are appearing as # .But the print preview is fine.
In order to avoid this we have maintained the proper device type for the output device(In transaction SPAD ).
After this setup the upper part of the header text is appearing but lower part of header text still has # in place of the special characters .Please let me know how this can be avoided.
Regards,
S.Subasree

Hi,
It seems the problem is because of CODE PAGE or Drivers. Check the language settings in your system and driver settings output device.
KR Jaideep,

Printing output incorrect with non Russian fonts

I have tried all the ways with approximate all the device types.
We are getting the correct print preview of spool requests in SAP with Russian Fonts, It means that SAP is doing it work, but the printing output is wrong.
The device types (eg. HPUTF8, HPLJ5, ZPC2424S) are printing correctly with other Printers like RU03, RU02, RU05 but not with RU07.
We have tried many windows drivers as well which were suggested by SAP.
I have tried the below device types as well which are cyrillic compatible. For these device types print preview is coming fine but not printout.
Cyrillic |   I5SPOST     | Dfnlatin (note 83502)
SAPWIN5     | Cyrillic, e.g. RU |    Yes
Below fonts are suitable for a given languages including Russian:.
* ISO 8859-5 (Cyrillic) ************ *******
BG, RU, SR, UK          COURCYR, HELVCYR, TIMECYR
While printing on
RU07 the font should be only above ones not the FC OCRA.   FCTIMECYR 080 00060XSF201SF201410 200040R
FCOCRA 120 00144 SF301SF301400100144 R
Kindly suggest if any particular setting like device type, symbol set, printer driver suitable for this printer to print output correctly.
Regards
Munish

This is normal printer HP laserjet p2055 dn printer.
RU03, RU06, RU07 are sap printer names in ECC system.
SAPSPrint server has names like mospr03, mospr06, mospr07.
SAP is using access method S and pointing to host printer drivers like mospr07 in sapsprint windows server.
It seems that either the printer driver on windows is incorrect in terms of printing from sap or there may be font problem in physical printer.

Randomly printed output is garbled with non-human characters and symbols

When printing from what we believe to be a pdf display, often, but randomly, the printed output is garbled. This may be the second and subsequent pages, only one page, the first one, etc. This happens often, but not exclusively, when printing from a bank generated pdf on their website but also occures on documents opened/created on our machine locally. I will try to attach a sample page using your 'link' symbole above: can't attach a scanned document (pdf) from my system (now why would I have thought this would be the case?.....) Can anyone help me get this document attached to this email?.......Okay! I've jumped through every hoop and there is no way to 'attach' a scanned document from my computer - are you people real or is this a nightmare? Totally unfunctional.
If anyone (human) gets this please contact me at [email protected] or my cell 480-235-1868, and thank you for trying. I am wasting paper and ink by the dozens of dollars every week on this problem, so any help would be appreciated. bill matney

For others who might have the same problem. You can solve it by quoting the device name and/or printer name.
!p """BÆR""" * """\\print\bærum""/q" * 50 *
This, however, causes the printer name to be '"BÆR"' with the double quotes included in the name. Thus, the job card must contain the unfortunate tripple quotes as well: -z"""BÆR""".
Vegard

Printer output incorrect/too small after upgrading to VS 2010 Crystal

I have a Windows Form application that was originally written using .net 3.5 and the version of Crystal Reports that came with Visual Studio 2008. When the VS 2010 release of Crystal Reports came out, I upgraded the application to .net 4/VS 2010 and the new Crystal release.
This application prints checks on blank check stock, so alignment of the output has to be very exact to print the checks correctly. It prints the reports using the PrintToPrinter() method of the ReportDocument class.
In the original version of the program, I had everything aligned correctly in the check report. After updating the application to the latest Crystal release,but making no changes to the report itself, I noticed that the alignment of the checks report was incorrect.
After comparing the output, I was able to determine that the new output is slightly shrunk compared to old output, almost as if it is scaling the report in some way.
I opened the report in the new report designer and verified that all page size and margin settings were correct/the same as before, and they were. The printed output is smaller than it should be based on how the report is designed. I tried adjusted the paper size, and also tried the "Dissociate Formatting Page Size and Printer Paper Size" to see if I could somehow adjust for the scaling, but nothing I tried was successful.
Our check printer is a HP LaserJet 5Si. During my investigation into the problem I discovered that if I printed the report to a pdf printer (PDFCreator) the resulting pdf did not have the same scaling/shrinking problem that I get when the report is sent directly to the LaserJet. I also printed a page from the pdf to the LaserJet using Acrobat Reader, and the output was as I expected it to be.
I only seem to be seeing the scaling/shrinking problem when I send the report directly to the LaserJet. Is there some new setting that I'm overlooking that would be applying some sort of report-wide scaling? Any other ideas as to why this is happening?

Looking for HP LaserJet 5Si at the HP website:
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25478&taskId=135
I notice that there are several different types (hm, mx, nx, ...). Also, there are different drivers, depending on the OS.
Ensure that you are using the correct driver (hm, mx, nx, ...) for your printer and for your OS and that the driver has the latest updates from HP.
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Print priview and spool print output are different

Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview one amount value is 120 coming..
when i am giving print with spool.. the amount value is showing
is 443..why it is showing wrong..
this is for perticular output type.
why perticular values are showing different in print view and
spool print.
regards,

make this setting change:
in SPAD > In the menu Settings -> Spool System
In the others tab check the first check box in the Output Controller block, SAVE and exit

Snippets in Printed Output

Hi,
I am using RH9 and Word 2007 .
I have created several snippets and for the most part the formatting appears correctly in the printed output.
The topic has a CSS attached and I manually added the CSS to the snippet as suggested in one of the posts here.
The problem is with the 'Normal' style - all other styles appear correctly in the printed output.
Looking at the Style Inspector in Word I can see that the Normal Style appears with some Text Level Formatting - if you clear this then everything is displayed correctly. Other text in the same topic marked as normal in RH9 appears correctly in Word.
So the question is does anyone know where the text marked as normal in the snippet is getting the text level formatting from and how do I fix it?
TIA
Morven

Hi Peter,
I found a thread here from Jan 15 2011:
rh8: Snippets: CSS styling - how is it done?
"In addition to Peter's answer, you can manually add a style sheet to a snippet. The style sheet is not used in the output, but you can select styles in the regular way.
A snippet is just a .htm file with a different extension. To add a style sheet, go to HTML mode and add <link rel="stylesheet" type="text/css" href="mycss.css" />
The snippet is in the root of your project, so be sure to use the correct path. Save and go to WYSIWYG mode. The snippet is now correctly formatted and you can use the styles from your css."
Now, what I understand from this is that style sheet is not used from the actual snippet but that this allows you to format the snippet and then it takes the formatting from the css which is attached to the topic.
The strange thing is that the mapping seems to be mostly correct (including tables!) except the text marked as 'Normal' - this appears as blue text which is how the font is formatted in RH.
I am outputing to a Word document and using a Word Template (Style Mapping.dot).
Thanks

I just found All the Hyperlink in the Safari Print Output are gone !

Hi Everyone,
My Macbook Air is Mac OS X Version 10.6.8 and Safari is 5.1 (6534.50).
In previous, I could find and use the Hyperlink in the Safari Print Output (after I printed the Web Page to PDF). Hours ago, I found All the Hyperlink in the Safari Print Output are gone!
Please help me to fix it.
Thanks & regards,
Joseph Lee

Got the exact same problem after updating! I tried it with Lion, too, and it does not work either. Seems like Apple removed it from either Safari or the PDF Maker. That was ONE big advantage over Windows users and now it's gone????????

Print Output problem in ECC6

Similar Messages

Maybe you are looking for