Print page order
All of a sudden, whenever I print a job, the document prints in reverse order—last pages first. Sometimes, the first page doesn't print. This is across an Airport Extreme-based home network. Are there any settings to correct this?
Hi Dan
In the Print dialogue, *Paper Handling* section, see that Reverse page order is not selected.
Similar Messages
-
Saving as a PDF in print page order [not actual page order]?!?!
Hiya,
I've got a 20 page newsletter, each page A4, all created in InDesign CS3 [nice and simple]. I want to print the document in print page order [as appose to actual page order] on our printer here at work, because it's clever and can fold and staple to create a book/newsletter etc! In InDesign, I can obviously use the 'print booklet' option to do just this, and it works great; all my pages are printed in the correct order, I can also choose to print 2-sided, all lovely. But I was wondering if there is an option somewhere to be able to save my InDesign doc as a PDF in print page order [front with back, page 2 with 19 etc] - as printing a PDF of my artwork seems to solve a problem i was having in the thread I posted up yesterday.
Cheers guysThis is called "imposition". Does your OS and InDesign version come with the "Print as Booklet" option?
If not, you can enter this range into the page number "Range" box on exporting:
20,1,2,19,18,3,4,17,16,5,6,15,14,7,8,13,12,9-11
(Typed from memory; -- please check)
If I then print this PDF to my HP with the options "double sided" and "2 pages per sheet", it comes out exactly the way it should.
(Waiting for the printer ... hold on.)
Well whaddoyouknow -- I got the numbering right first time. Perfect! -
Printing page order options: meanings? differences?
In the print dialog box, under page order, there are 3 options.
Automatic (default)
Normal
Reverse
What is the meaning of Automatic?
If I am doing double sided large document printing on a non duplex printer I would first print the odd numbered pages in the Normal page order.
Next with the odd page stack back in the paper tray I would print the even pages in the Reverse order. This works for an even number of total pages, but not for an odd number of total pages, page 2 would end up on the back of page 3, not back of page one.
Will the Automatic page order option solve this problem by automatically inserting a blank page as the first page of the even side page printing when the total page count is odd?
Does this Q make any sense?The "Automatic(default)" refers to what is specified in the printer's PPD file. That may be either page 1 first (usually Normal) or page 1 last (usually Reverse). It may vary from printer to printer or from driver to driver. For example, my Epson Stylus Photo 1280 will print page 1 first when I use the Epson drivers when I use Automatic. If I use the Gutenprint drivers, it will print the last page first if I use Automatic.
If you are doing a lot of manual duplex printing, you might want to take a look at CocoaBooklet _http://www.iconus.ch/fabien/products/cbeng/cbeng.html_. It can simplify matters greatly.
Matt -
All the Pages are Printed - Document Printing Sales Orders
When using the Document Printing option for Sales Orders, if I select multiple documents and select print I get a message after each document that says "All the Pages are Printed", then the next document comes for printing. I also get a prompt each time whether or not to print Sales Order only or Sales Order and Pick List.
I don't have the same issue if printing Invoices from Document Printing. It asks what to print and prints all records without additional prompts between each record. I don't see anything in Print Preferences that would cause the Order to act differently from the Invoice.
We are using B1 9.0 PL 06.
AlanHello there, linafrompereira.
The following portion of the online Pages Help for Mac provides information on grouping items in Pages:
Layer, group, and lock objects - Pages Help for Mac
http://help.apple.com/pages/mac/5.2/#/tan5eab46568
Group and ungroup objects
Shift-click to select multiple objects.
In the Arrange pane of the Format inspector, click Group (or choose Arrange > Group from the Arrange menu at the top of your computer screen).
To ungroup an object, select it, then click Ungroup or choose Arrange > Ungroup.
Tip: You can Control-click objects, then choose Group or Ungroup from the shortcut menu. You can also add these buttons to the toolbar: Group and Ungroup.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
How to print new order in odd page or new page
Hi Experts,
I want to print my order layout in oddpage. If any new order comes it should print inthe odd page. Currently its printing Back to back.
But I want to print my order layout in oddpage or new page.
Any one guide this??
Offering points is against the terms of engagement. Text changed by moderator. Also, do not post the same question in more than one forum.
Mohana
Edited by: Mohana Vijayan on Oct 31, 2008 8:35 AMHi mohana,
For script or smartform?
In case smartform
Create pages as per your requirement.
In the global defintion --> initialization tab -->
if w_page = 1.
control_parameters-startpage = '%PAGE1'.
else.
control_parameters-startpage = '%PAGE2'.
ENDIF.
Regards,
Sravanthi -
Universal printing PCL5 & HP Laserjet 700 Color - wrong page order
Hi,
I recently installed an HP Laserjet Color 700 MFP in our network (around 20 PC workstations running Windows 7 professional & HP UPD PCL5)
From one of the stations, each print job sent has a reversed page order - only setting the printer properties to "reverse" results in the correct page order.
Ist this some known problem?
thanks
ThomasI am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Printing pages in reverse order as a default for Mac os 10.6.3
Help!
Not sure what happened ...
I'm trying to print document from all applications and as a default the driver is printing pages (E.G 20page doc)
with page 1 first and the 2 on top, then 3 etc (pages face up as is ink jet fashion...) finally with page 20 on top ...
No good, not what I want!
I do know that I can open the Word print dialog box which does contain a setting Copies & Pages/Page Handling/Page Order with the options "automatic, normal, reverse" but every time I go into a new doc I have to do this every time.
How do I set this as the default?
Maybe this is not an Apple issue? I'm using an Epson TX810FW ...may have to take it up with them ...?
Any help would be most gratefully appreciated!!
FSet it up how you want it and then save it as a preset. You will probably find that once you've used it the print driver will default to it on subsequent printings.
-
Page Order Not Availiable on 8630 Printer
I use Quickbooks to print checks and i recently purchased this printer to print checks from one drawer while other programs print from plain paper drawer. Most of the settings were easy to set up. The checks purchased come in order so it only makes sense that the printed side will be facing up and the printer usually prints on the other side. This is usually fixed by a setting called page order under the layout tab in printing preferences. This option does exist under fax options but not under print options. I noticed there are a few closed forums that never got to the bottom of this. Will there be a fix or should i return this printer and stick with my 8600? I have installed the latest drivers from the website.
Thanks, ChrisHi @Chris-K,
Thank you for visiting the HP Support Forums! Well after some research, the page option is not there to change the page order. It looks like they took the option away in Version 32 of the software. I have no explanation for you as to why this was removed.
I am not sure if there will be a fix for this or if the Page order is something that will no longer be an option. You could always try and use an alternate driver, but you may lose some other features. Take a look here: How to Assign Alternate Print Drivers in Different Versions of Windows.
Thanks again,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
XSL-FO for Standard Purchase Order, doesn't print page number
Hi,
I worked on XSL-FO code to custom the PDF output for Standard PO. Everything works great: I added company logo (in a different position of the standard commented code <!-- Too easy just to uncomment... :-)--> ), i created new attribute sets to highlight some elements on the print, I added a footer with company details and document type and number (instead of placing this in the header, the costumer didn't like it where it was..)
OK. BUT: the page number at the bottom on the right isn't printed anymore. For example: if the PO page is n.1 of 2 pages, it comes only '12' and not Page 1 of 2. So i tought not to use the original template (tihs one)
<!-- Template for displaying the page numbers -->
<!-- bug#3836856: Template for displaying the page numbers at right bottom of the page -->
<xsl:template name="pageNumber">
<xsl:variable name="po_page">
<xsl:value-of select="$BOILER_PLATE_MESSAGES_OBJ[MESSAGE='PO_FO_PAGE'][1]/TEXT"/>
</xsl:variable>
<!-- Get the String before the PAGE_NUM token -->
<xsl:variable name="string_before_page_num">
<!-- <xsl:value-of select="substring-before($po_page,'&PAGE_NUM')"/>-->
<xsl:value-of select="substring-before($po_page,'Pag.;PAGE_NUM')"/>
</xsl:variable>
<!-- Get the String after the PAGE_NUM token -->
<xsl:variable name="string_after_page_num">
<!-- <xsl:value-of select="substring-after($po_page,'&PAGE_NUM')"/>-->
<xsl:value-of select="substring-after($po_page,'/ ;PAGE_NUM')"/>
</xsl:variable> ......
but inseriting a select just where I want the page num to be displayed (see code)
<fo:block xsl:use-attribute-sets="test_style" >
<xsl:value-of select="$BOILER_PLATE_MESSAGES_OBJ[MESSAGE='PO_FO_PAGE'][1]/TEXT"/>
</fo:block>
but this gave me as result 'Page &PAGE_NUM of &END_PAGE'.
Where did I do wrong?? It's like the PO_FO_PAGE message is not dinamically insered in the PDF. Hope I've been clear enough and somene can help me. Thaks in advance, MicheleHi Michele:
I can check out for you how to print page number in XSL-FO (There is an O'Reilly) book, but I think I help you better by recommending a different strategy - Don't write XSL-FO stylesheets. While Purchasing does not support RTF templates you can still write RTF templates and convert them to FO using the XML Publisher Template Builder for Word.
Download the matching Template Builder for Word (5.0) or XML Publisher Desktop 5.5 (includes the Template Builder) patch and then Create your template as an RTF template.
You can then EXPORT the template as XSL-FO stylesheet and upload as to Purchasing AS LONG AS THE VERSION OF THE DESKTOP and E-Businees Suite XML Publisher MATCH.
If you still want to write XSL stylesheet, you can just use the Template Builder to generate you the code and paste the code (e.g. for page numbers) into your stylesheet.
By the way - Purchasing will support RTF templates in future versions...
Hope that helps,
Klaus -
Mass display or print Purchase Order History
Instead of checking your Purchase Order History one at a time, you can now mass display or print them with this customized abap report.
Mass display or print Purchase Order History
You can request report by :
1. Change date
2. User Name
3. Purchase Order Number
4. Vendor Code
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com
REPORT ZPOCHANGE LINE-SIZE 132 NO STANDARD PAGE HEADING
LINE-COUNT 065(001)
MESSAGE-ID VR.
TABLES: DD04T,
CDHDR,
CDPOS,
DD03L,
DD41V,
T685T,
VBPA,
TPART,
KONVC,
EKKO.
SELECT-OPTIONS: XUDATE FOR CDHDR-UDATE,
XNAME FOR CDHDR-USERNAME,
XEBELN FOR EKKO-EBELN,
XLIFNR FOR EKKO-LIFNR.
SELECTION-SCREEN SKIP.
TEXT-001 - Sorting Sequence
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
PARAMETERS: SUDATE RADIOBUTTON GROUP R1,
SNAME RADIOBUTTON GROUP R1,
SOBID RADIOBUTTON GROUP R1.
SELECTION-SCREEN END OF BLOCK BLK1.
DATA: WFLAG,
WCHANGENR LIKE CDHDR-CHANGENR.
DATA: INDTEXT(60) TYPE C.
DATA: BEGIN OF ICDHDR OCCURS 50.
INCLUDE STRUCTURE CDHDR.
DATA: END OF ICDHDR.
DATA: BEGIN OF ICDSHW OCCURS 50.
INCLUDE STRUCTURE CDSHW.
DATA: END OF ICDSHW.
DATA: BEGIN OF EKKEY,
EBELN LIKE EKET-EBELN,
EBELP LIKE EKET-EBELP,
ETENR LIKE EKET-ETENR,
END OF EKKEY.
DATA: BEGIN OF ITAB OCCURS 50,
BEGIN OF EKKEY,
EBELN LIKE EKET-EBELN,
EBELP LIKE EKET-EBELP,
ETENR LIKE EKET-ETENR,
END OF EKKEY,
CHANGENR LIKE CDHDR-CHANGENR,
UDATE LIKE CDHDR-UDATE,
UTIME LIKE CDHDR-UTIME,
USERNAME LIKE CDHDR-USERNAME,
CHNGIND LIKE CDSHW-CHNGIND,
FTEXT LIKE CDSHW-FTEXT,
OUTLEN LIKE CDSHW-OUTLEN,
F_OLD LIKE CDSHW-F_OLD,
F_NEW LIKE CDSHW-F_NEW,
END OF ITAB.
DATA: OLD_OBJECTID LIKE CDHDR-OBJECTID.
FIELD-SYMBOLS: <F_OLD>, <F_NEW>.
SELECT * FROM EKKO WHERE EBELN IN XEBELN AND
LIFNR IN XLIFNR.
CLEAR CDHDR.
CLEAR CDPOS.
CDHDR-OBJECTCLAS = 'EINKBELEG'.
CDHDR-OBJECTID = EKKO-EBELN.
PERFORM GETCHGDOCS.
ENDSELECT.
IF SUDATE = 'X'.
SORT ITAB BY UDATE EKKEY-EBELN CHANGENR EKKEY-EBELP
EKKEY-ETENR.
ELSEIF SNAME = 'X'.
SORT ITAB BY USERNAME EKKEY-EBELN CHANGENR EKKEY-EBELP
EKKEY-ETENR.
ELSE.
SORT ITAB BY EKKEY-EBELN CHANGENR EKKEY-EBELP EKKEY-ETENR.
ENDIF.
LOOP AT ITAB.
CLEAR: INDTEXT, EKKEY.
CASE ITAB-CHNGIND.
WHEN 'U'.
INDTEXT(50) = ITAB-FTEXT.
INDTEXT+51 = TEXT-020.
CONDENSE INDTEXT.
WHEN 'D'.
INDTEXT = TEXT-021.
WHEN 'E'.
INDTEXT(5) = ITAB-FTEXT.
INDTEXT+51 = TEXT-021.
CONDENSE INDTEXT.
WHEN 'I'.
INDTEXT = TEXT-022.
ENDCASE.
RESERVE 4 LINES.
IF WCHANGENR NE ITAB-CHANGENR.
WCHANGENR = ITAB-CHANGENR.
EKKEY = ITAB-EKKEY.
WRITE:/ ITAB-UDATE UNDER 'Change Date',
ITAB-UTIME UNDER 'Time',
ITAB-USERNAME UNDER 'User Name',
ITAB-EKKEY-EBELN UNDER 'PO No',
ITAB-EKKEY-EBELP UNDER 'Item',
ITAB-EKKEY-ETENR UNDER 'Sch No',
INDTEXT UNDER 'Changes'.
ELSEIF ITAB-EKKEY NE EKKEY.
WRITE:/ ITAB-EKKEY-EBELP UNDER 'Item',
ITAB-EKKEY-ETENR UNDER 'Sch No',
INDTEXT UNDER 'Changes'.
ENDIF.
CASE ITAB-CHNGIND.
WHEN 'U'.
ASSIGN ITAB-F_OLD(ITAB-OUTLEN) TO <F_OLD>.
ASSIGN ITAB-F_NEW(ITAB-OUTLEN) TO <F_NEW>.
WRITE: / TEXT-023 UNDER 'Changes',
<F_OLD>.
WRITE: / TEXT-024 UNDER 'Changes',
<F_NEW>.
WHEN 'E'.
ASSIGN ITAB-F_OLD(ITAB-OUTLEN) TO <F_OLD>.
WRITE: TEXT-023 UNDER 'Changes',
<F_OLD>.
ENDCASE.
SKIP.
ENDLOOP.
TOP-OF-PAGE.
WRITE:/ SY-DATUM,SY-UZEIT,
50 'P U R C H A S E O R D E R H I S T O R Y',
120 'Page', SY-PAGNO.
WRITE: / SY-REPID,
60 'Purchase Orders Changes'.
SKIP.
ULINE.
IF SUDATE = 'X'.
WRITE:/001 'Change Date',
014 'Time',
024 'User Name',
038 'PO No',
050 'Item',
057 'Sch No',
065 'Changes'.
ELSEIF SOBID = 'X'.
WRITE:/001 'PO No',
013 'Item',
020 'Sch No',
028 'Change Date',
041 'Time',
051 'User Name',
065 'Changes'.
ELSE.
WRITE:/001 'User Name',
015 'Change Date',
028 'Time',
038 'PO No',
050 'Item',
057 'Sch No',
065 'Changes'.
ENDIF.
ULINE.
FORM GETCHGDOCS.
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
DATE_OF_CHANGE = CDHDR-UDATE
OBJECTCLASS = CDHDR-OBJECTCLAS
OBJECTID = CDHDR-OBJECTID
TIME_OF_CHANGE = CDHDR-UTIME
USERNAME = CDHDR-USERNAME
TABLES
I_CDHDR = ICDHDR
EXCEPTIONS
NO_POSITION_FOUND = 1
OTHERS = 2.
CHECK SY-SUBRC EQ 0.
DELETE ICDHDR WHERE CHANGE_IND EQ 'I'.
CHECK NOT ICDHDR[] IS INITIAL.
LOOP AT ICDHDR.
CHECK ICDHDR-UDATE IN XUDATE.
CHECK ICDHDR-USERNAME IN XNAME.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING CHANGENUMBER = ICDHDR-CHANGENR
IMPORTING HEADER = CDHDR
TABLES EDITPOS = ICDSHW
EXCEPTIONS NO_POSITION_FOUND = 1
OTHERS = 2.
CHECK SY-SUBRC EQ 0.
LOOP AT ICDSHW.
CHECK ICDSHW-TEXT_CASE EQ SPACE.
MOVE-CORRESPONDING ICDSHW TO ITAB.
MOVE-CORRESPONDING ICDHDR TO ITAB.
MOVE ICDSHW-TABKEY+3 TO ITAB-EKKEY.
APPEND ITAB.
ENDLOOP.
ENDLOOP.
ENDFORM.
END OF PROGRAMHi,
copied from http://www.sap-img.com/mm001.htm -
How to print Column Labels on each print page of an ALV report
Hi,
I have an ALV report which is of 10 print pages.
I need to print Column Labels on each print page.
How it is possible.
Plz write the solution
NarendraHi Narendra
try this code.
reward pts if help.
Deepanker.
*& Report ZDEMO_ALVGRID_EDIT *
*& Example of a simple ALV Grid Report *
*& The basic ALV grid, Enhanced to display specific fields as *
*& editable depending on field value *
REPORT ZDEMO_ALVGRID_EDIT .
TABLES: ekko.
TYPE-POOLS: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
field_style TYPE lvc_t_styl, "FOR DISABLE
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DATA: it_fieldcat TYPE lvc_t_fcat, "slis_t_fieldcat_alv WITH HEADER LINE,
wa_fieldcat TYPE lvc_s_fcat,
gd_tab_group TYPE slis_t_sp_group_alv,
gd_layout TYPE lvc_s_layo, "slis_layout_alv,
gd_repid LIKE sy-repid.
*Start-of-selection.
START-OF-SELECTION.
PERFORM data_retrieval.
PERFORM set_specific_field_attributes.
PERFORM build_fieldcatalog.
PERFORM build_layout.
PERFORM display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
FORM build_fieldcatalog.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-scrtext_m = 'Purchase Order'.
wa_fieldcat-col_pos = 0.
wa_fieldcat-outputlen = 10.
wa_fieldcat-emphasize = 'X'.
wa_fieldcat-key = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'EBELP'.
wa_fieldcat-scrtext_m = 'PO Item'.
wa_fieldcat-col_pos = 1.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'STATU'.
wa_fieldcat-scrtext_m = 'Status'.
wa_fieldcat-col_pos = 2.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'AEDAT'.
wa_fieldcat-scrtext_m = 'Item change date'.
wa_fieldcat-col_pos = 3.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-scrtext_m = 'Material Number'.
wa_fieldcat-col_pos = 4.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MENGE'.
wa_fieldcat-scrtext_m = 'PO quantity'.
wa_fieldcat-col_pos = 5.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MEINS'.
wa_fieldcat-scrtext_m = 'Order Unit'.
wa_fieldcat-col_pos = 6.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'NETPR'.
wa_fieldcat-scrtext_m = 'Net Price'.
wa_fieldcat-edit = 'X'. "sets whole column to be editable
wa_fieldcat-col_pos = 7.
wa_fieldcat-outputlen = 15.
wa_fieldcat-datatype = 'CURR'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'PEINH'.
wa_fieldcat-scrtext_m = 'Price Unit'.
wa_fieldcat-col_pos = 8.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
FORM build_layout.
Set layout field for field attributes(i.e. input/output)
gd_layout-stylefname = 'FIELD_STYLE'.
gd_layout-zebra = 'X'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
FORM display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
i_callback_program = gd_repid
i_callback_user_command = 'USER_COMMAND'
is_layout_lvc = gd_layout
it_fieldcat_lvc = it_fieldcat
i_save = 'X'
TABLES
t_outtab = it_ekko
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
UP TO 10 ROWS
FROM ekpo
INTO CORRESPONDING FIELDS OF TABLE it_ekko.
ENDFORM. " DATA_RETRIEVAL
*& Form set_specific_field_attributes
populate FIELD_STYLE table with specific field attributes
form set_specific_field_attributes .
DATA ls_stylerow TYPE lvc_s_styl .
DATA lt_styletab TYPE lvc_t_styl .
Populate style variable (FIELD_STYLE) with style properties
The NETPR field/column has been set to editable in the fieldcatalog...
The following code sets it to be disabled(display only) if 'NETPR'
is gt than 10.
LOOP AT it_ekko INTO wa_ekko.
IF wa_ekko-netpr GT 10.
ls_stylerow-fieldname = 'NETPR' .
ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled.
"set field to disabled
APPEND ls_stylerow TO wa_ekko-field_style.
MODIFY it_ekko FROM wa_ekko.
ENDIF.
ENDLOOP.
endform. " set_specific_field_attributes
pls reward pts is help, -
How to turn a doc designed for spread into a page ordered pdf?
I am a relative InDesign newbie, so please excuse my ignorance. I have document of installation instructions that is printed on a single double-sided piece of paper, which is then folded. So in InDesign, there are two layout spreads. The first one includes actual pages 2,3,4,5,6,7,8, and 9. The second one includes 10,11,12,13,14,15,16, and 1.
After updating this I want to create both a spread version of the pdf for a printer, plus a regular page ordered pdf for web viewing. I am not clear on how to do this.
I am using CS5.
Thank you in advance for your help.There are two "pages". Not sure how they are referred to in InDesign, but when you look at the InDesign doc, you see two separate "pages", each one divided into 8 sections. There is also a third "page" which includes all the specs for the printer (it is in the spread version of the pdf, but is not printed and not included in the web version of the pdf).
-
How do I reset my HP photosmart all-in-one B210a to print page 1 first?
My printer is apparently all set up, but I want to change the print sequence from reverse order to starting at page 1. I have the latest HP software installed, but there is no where I can see of changing the sequence. I have been in to System Preferences/Printers and whilst it brings up my printer I can not carry out any changes to its' default sequence of operation.
Is there a screen that I can get open that will allow me to set orientation and to print in normal order? I can do it an application, but that is a pain because If I want to print something off the Internet and there are more pages than two, it will print page 2 first. The knock on effect is that sometimes I want to print double sided and the only way to do this sensibly is to do each page individually then re-feed the page and do the next page. This afternoon, I did that, printed page 1, then printed pages 2 and 3, and ended up with page 3 on the back of page 1 because it printed in reverse order!
Thanks
altvEric Root
Thanks for that. Yes I did see that in my chasing around, but it would be nice to have it the other way round as a default. I understand why it is done that way, but I rarely, these days, have large documents to print and the right way round would be useful! Particularly when occasionally, as I say above, I want to double side print which the HP doesn't do as a norm! C'est la vie!!
Cheers
altv -
Hi All,
We have an issue when printing purchase orders.
When the purchas eorder goes on to two page we get a blank page inbetween.
Does anyone know what could be causing this?
The SAP Script looks OK so I imagine that it must be a setting in config somewhere?
Thanks
StuartHi,
It is the issue related to the Form layout..
Are you using the SAP STD Driver program and Form Layout.
If yes..you will not get such issue.
If you are using Custom Form,please check with your ABAP developer..
Thanks,
Kumar Arcot -
Reverse page order in pdf?
Is there a easy / cheap tool or method to reverse the page order for a multi-page .pdf document?
I think something like Adobe Writer might do it, but I don't need to do this very often, and was hoping to find a cheaper way, or shareware product...
I can manually rearrange the pages in something like PDFLab, but this can be time-consuming for larger documents...
My printer lets me print in reverse page order, but I can't seem to make it print to .pdf in reverse order?
Any ideas!?
Thanks!
MarkYou can use this Action to reverse it back:
http://acrobatusers.com/actions-exchange/reverse-page-order1
On Thu, Jul 25, 2013 at 12:44 AM, pirouette-luna
Maybe you are looking for
-
How do I get back my $ 5.30 I took my gift card
I got an inbox at 1:30 am and was a receipt of an app that I do not buy. Besides I have no iPad.
-
Calling a method in Parent component from Title Window
Hi all, I have a parent component that opens up a Title window when I click a button. Now I want to call a method in that parent component from the Title window. How do I do this in Flex? Could anyone give me a hint please. Thank you in advance for t
-
Iphone 5,Facebook app, time and battery % does not display?
Using iphone 5, Facebook app, why does the time and battery percentage no longer display?
-
Will the ipad mini cellular function work internationally?
Interested in purchasing an ipad mini with cellular functionality ... but not sure if the sim slot will work in Jordan. Can anyone shed some light?
-
Need help reactivating Microsoft Word
I have the code, but it's not compatible with account. I have paid for it, but it won't link up to my account.