Print Problems with Elements 9 for Mac

I cannot print borderless (randlos) on format 10 x 15 (or any other) on my Printer Canon PIXMA MP970. With Elements 8 for Windows there is no problem. I have tried any possible combinations of adjustements and have the lates printer driver installed.

10 x 15 cm is a standard European paper size but the choice ist not available in the paper size selection. The choices avaiIable seem to be only American. I have to define it as user defined (Benutzerdefiniert). I have contacted Canon but they have no solution for this problem. It seems that PSE 9 for Mac and Canon printer drivers don't like each other. A least the German versions. With PSE 8 for Windows everything works fine. There the standard European paper sizes and borderless printing can be selected with no problem. As mentioned in other topics rotating is although a problem. Lucky enough I have also a Windows system with PSE 8.

Similar Messages

Problem with facetime for mac

hello guy! I've got a problem with facetime for mac.My sister has a I-pod touch fourth generation with factime but i cna't phone her a message come on my mac.It say "xxx can't receive facetime's calls"!Can you help me??

Thanks, Dah•veed.
I did see mention of using Google Public DNS while I was searching the forums prior to posting, but to be honest didn't think it was a DNS-related problem.
However, to rule it out I've set the prefered DNS servers on my router to Google's, but FaceTime still disconnects after 4-5 seconds when calling between me and my brother-in-law. It doesn't matter who initiates the call.
As a test, before I made the changes to my router, I logged into FaceTime as him on my MBP and tried calling myself on my iMac, and that was successful.
The same test between the two iMacs when they were here was unsuccessful, so now I'm definitely thinking it's something on the '08 iMac.
Now I just need to figure out what...

Problem with Twitter for Mac notifications

Hello,
I have a strange problem with Twitter for Mac. On both my home and office Macs. New posts appear in app window but there aren't any notifications even though notifications are set in preferences to show in both dock and menubar. Perhaps anyone noticed similar strange behaviour? I didn't find anything similar on Twitter forums.
Thanks in advance.

Solved by
Dr.AvituvOct 20, 2014 11:09 PM
go to Terminal and post this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/support/lsregister -kill -seed
if it doesn't have that specific directory try this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -seed
once the scanning is done (can be short or long, depends on how heavy your system is) RESTART the computer.
when you're back, go to Apple>system preferences>extensions.... guess who's there.
I hope it helped.
The Doctor.
iMac, OS X Yosemite (10.10)
To restore Actions extensions for good and other stuff
THANKS!

I have problems with office for mac screen resolution, specially with excel

I have problems with office for mac screen resolution, specially with excel ?

For starters, make sure to Check for Updates on any of the Help menus, and make sure the product has all the latest patches. MS did come out with a patch addressing the display issues on Retina Macs. Latest patchlevel is 14.3.2.
We are talking about Office:Mac 2011, right?

Problems With Bridge for Mac - Playlists and Photos

I have a Sony Xperia Z3, up to date and an updated version of sony bridge for Mac, so there isnt any problems there for a start.
Firstly, when I syncronise my playlists, all the tracks are present on my phone, however not divided into the playlists I syncronised them in. Theres 1000's of songs, so to recreate the playlists individually is very tedious, is there no way of transferring the songs in their collections, so they can be viewed in the itunes playlists?
Secondly, I syncronised alot of photos from iPhoto using the app. Lots of photos have turned up with a black picture icon on the phone, I assume corrupt. Other photos have syncronised all distorted. Why is this? Again, there are alot of these so to do it in smaller sets is also tedious, as the app is pretty slow compared to syncronising with itunes and my old iphone.
Overall, not impressed with bridge for mac, its a pretty unreliable and slow program!

Hi richardackroyd!
Sorry to hear about your problems.
It's hard for me to know exactly what causes the problems.
Can you please send me the error-logs for both the probems.
So I can forward them to the development team.
Here’s how to get error logs from Sony Bridge for Mac:
1. In BfM, hold the "alt" key down while selecting the "Phone" menu. Select "Clear logs" to remove all old logs and get a clean start
2. Reproduce the problem you're having, whether it's connecting the phone, importing photos, doing backup...
3. In BfM, hold the "alt" key down while selecting the ”Xperia” menu. Select "Export logs"
4. On the computers desktop there should now be a file named "SonyBridgeForMacLogs_[date].zip
5. PM me a open dropbox link withe the files.
Best regards
Fredrik

Printing problems with Elements and iPhoto on OSX 10.5.7

I am having problems with printing photos on my printer (Canon iP4000) since getting the new iMac with OSX (10.5.7) and using Photoshop Elements 6 and iPhoto. The Canon printer driver (and all my other data) were copied to my Mac by the techs at the Apple store from which I purchased the iMac. (I previously had a Mac G4 with OSX 10.4.11 Panther.)
Photos that used to come out crystal clear and brilliant on the printer from the G4, now are faint with kind of a white veil. When I try to print in Elements, I get a message that says "Some PostScript specific print settings (Interpolation, Calibration, Encoding) will be ignored since you are printing to a non-PostScript printer." I really have no idea what that means. Anybody?
Text printing comes out fine, both from word processing documents and web pages. I am using the latest printer driver (4.8.3) for the iP4000 (probably 4 years old or so), and there are no new driver downloads available for it. I trashed the Canon software/drivers and reinstalled, to no avail.
Canon Support has been helpful and have made many suggestions, but none has worked. I tried printing with Canon's EasyPhotoPrint app, and the photos print fine. So the problem appears to be a compatibility of the printer with Elements 6 and iPhoto.
Has anyone else had this experience? Does anyone have an opinion if this means I need to get a new printer? If so, any suggestions on a good, moderately priced one for Leopard on the iMac that will definitely work with Elements 6 and iPhoto?

The v4.8.3 driver she has is the latest version Canon has supplied.
Given the driver is working okay from some other applications, there has to be something amiss with the colour management of iPhoto and PSE6.
For iPhoto, as a test I would suggest the Color Options > Color Correction is set to None to see how this impacts the printed image. Then I would try the BJ Standard and ColrSync settings to see how the output is affected.
During the Color Options trial, ensure the Quality & Media > Media Type is set to the appropriate paper type, such as Photo Paper and the Print Mode be set to Top Quality Photo. With regards to the Media Type setting, some of the paper stocks have a profile associated with them. If you use Photo paper but use the Plain setting, then you will get a washed out print.
Pahu

Printing Problems with Elements 8.0 and EXIF time data

I've been using Premiere Elements 8.0 in Windows XP Professional for a couple of years with no problems. I shoot mostly in JPEG. I've always imported my images using a card reader (the same one). About a year ago suddenly I ran into printing issues. When I imported my images and tried to print them Elements crashed just at the point where it should begin the actual printing. By chance I discovered that if I adjusted the time EXIF on the images in Elements by either hours or days, back or forward and adjusted them back to the original time/date the problem disappeared. If I had shot in RAW and edited these images there were no problems with the resultant JPEG.
I noted the discussions about Elements changing the time in the EXIF and checked for this but this hadn't happened. The EXIF in camera and in Elements were the same. I also checked this against the time settigs of the camera and they were the same. I shoot with a Nikon D300.
I backed up my images and did a complete re-format of my computer so that it was back to its ex-factory settings, re-installed Elements, restored my catalog from the backup and the problem still arose. I'm reluctant to upgrade to Elements 10 until I (hopefully) I find out if (a) anyone else has the same problem; and (b) if anyone who had it has fixed it.
Any ideas would be very welcome.

Miceal,
I am confused. Do you mean Photoshop Elements? Premiere Elements does not have a Print function. On can Export/Share, but not Print. For Photoshop Elements, you will want the PSE Forum.
Good luck,
Hunt

Printing Problems with Elements 11

I have just started with Elements 11. At first it printed ok. but when I tried to set it up with Elements to control the printer ( Epson SX400 ) I keep getting a message saying that ICC Profile is invalid, and the program will not let me print at all. My computer O/S is Windows 7, 64 bit. the Printer driver is one supplied by Epson EU to run the O/S.
I have tried returning to Printer controls settings, this has not worked. I have tried to print on a different printer (Brother HL-2250DN Laser Printer) this will not print either.
I have tried to print on my old Serif PhotoPlus program this is OK. So the problem is in my settings for Elements 11,
Do I Need to Reinstall the programme
Andy H

I would explain you the steps you need to follow if you are giving control to Photoshop Elements to manages color.
Step 1- Select your printer and then Click More Options at the bottom left of the Print window.
Step 2- No click on Color Management tab.
Step 3- Now from "Color Handling" drop down select Photoshop Elements Manages color. As you select this option "Printer Profile" drop down will become enable.
Step 4- If Image Space is sRGB then select sRGB profile from Printer Profile drop down else select Adobe RGB.
Step 5- Click On Printer Preferences button. It will open your printer's preferences dialog.
step 6- Now click on "Main" tab and then click Advanced button.
step 7- Now under "Color Management" section please select No Color Management here.
step 8- Click OK and come back to main Print dialog of Photoshop Elements. Now click Print.
Note -If you choose Photoshop Elements manages color, it is very important that you disable color management in your printer driver.Letting the application and the printer driver simultaneously manage colors during printing results in unpredictable color.
Try with above written steps I hope it would help.
Cheers !!!

Is anyone else having problems with Office for Mac and Lion?

Since installing Lion 10.7.1 on a macbook pro 2.53 Ghz 4GB 1067 MHz DDR3 I have had no end of problems. Both Excel and Word hang, crash and saving an Excel file is a pain. A 12mb spread sheet just took 4 minutes to save! I have MS Office for Mac 2011 version 14.1.3.
Another problem that may not be related to Office is that opening Finder is so slow and most of the time it takes a minute to display folders in Desktop or Documents.
Any suggestions would be welcome .. I regret installing Lion .. I had no problems with Snow Leopard!

botro wrote:
I'm unable to install the MS Office 14.1.3 update - I keep getting "Installation Failure"
I have not found a solution on this board or Microsoft community
This thread had some things to try.

Problems with Photos for Mac

Last night, I upgraded to Photos and I've noticed three problems for which I'd like help.
First, Photos seems to have lost about 10 percent of my photos. When upgrading, it asked me which of my two iPhoto libraries I wanted to upgrade and it only gave me the option to select one. Now, I can't find any option to import my second library. How do I do that and add my missing photos?
Second, I spent months organizing curating my iPhoto library, which consists of 35,000 photos, into various events. The new Photos app has completely obliterated that hard work by removing "events" from the organization and then by jumbling photos into what seems to be, at times, a random ordering. Is there any way to resurrect my events and the prior chronology I had established for my photos? I am absolutely fuming at what occurred.
Third, even though I turned on iCloud support for my Photo library, and purchased additional iCloud storage for my photos, no additional photos from my Mac's photo library seem to be appearing on my iPhone or iPad. Is anyone else having that issue?
In sum, I'm not sure what benefits this supposed upgrade from iPhoto actually provides to consumers. It destroys consumers' prior work, replaces it with chaotic organization -- especially for consumers with large photo libraries -- and its most compelling feature -- iCloud support -- doesn't seem to work.
Apple, I have been a loyal customer for many years but I must say that the quality of your software upgrades, both on the Mac and the iPhone/iPad, is deteriorating sharply. It used to be that when a consumer bought your products or loaded your software, it worked with few apparent bugs. Now, I increasingly find that major features don't work well or don't work at all. I am beginning to feel the frustration and irritation with Apple that I felt with Microsoft and that had made me flee Windows for OS.

Second, I spent months organizing curating my iPhoto library, which consists of 35,000 photos, into various events. The new Photos app has completely obliterated that hard work by removing "events" from the organization and then by jumbling photos into what seems to be, at times, a random ordering. Is there any way to resurrect my events and the prior chronology I had established for my photos? I am absolutely fuming at what occurred.
Use the feedback form to let the developer team know: Apple - Mac OS X - Feedback
This apparent mess is intentional. Photos organization of the library is automatic. It will structure the library by Moments - grouping the photos by location and date.
The only organization you can add are albums and smart albums based on keywords, etc.
However, your events should have been migrated. You should be seeing a folder "iPhoto Events", with albums for each event. Is this folder missing?

Problems with Bridge for Mac 3.7

I've been using Bridge for Mac for a while without any problems, but since it downloaded the 3.7 update it won't recognize my phone. When I connect, it thinks for a few seconds, then says it cannot connect. I've tried deleting and redownloading the app, and deleting any relevant system files I can find. If I connect it in Windows with the same cable and through the same USB port, PC Companion recognizes it no problem. Any idea what's going on here?

Hi mcilwr01,
I'm sorry Bridge isn't working for you, and I understand you're upset.
Could you please send me error logs that I can forward to the development crew? Otherwise it's near impossible to tell what's causing your problems.
Here’s how to get error logs from Sony Bridge for Mac:
1. In BfM, hold the "alt" key down while selecting the "Phone" menu. Select "Clear logs" to remove all old logs and get a clean start
2. Reproduce the problem you're having, whether it's connecting the phone, importing photos, doing backup...
3. In BfM, hold the "alt" key down while selecting the "Phone" menu. Select "Export logs"
4. On the computers desktop there should now be a file named "SonyBridgeForMacLogs_[date].zip
5. PM that file to me or post the contents here
We are working on solving the problems of 3.7 as fast as possible, I apologize for not having a solution for you right now.
Best Regards,
David

Problems with Office for Mac 2011 Outlook

So I've BYOD with my work, but having difficulty in accessing my Outlook email on the work's server. I keep getting the following pop-up for the mail stating that Outlook has redirected to the server (name of server here) to get new settings for your account (name of email account here). Do you want to allow this server to configure your settings? I havce the option of to Deny or Allow, both of which have been tried. The pop-up still pops-up no matter.
What our PC-oriented tech department has discovered is that it is being routed to an incorrect address. They have no idea where that address resides and we need to figure out how to insert the correct address into the correct place within the software.
Can anyone help me?
Thanks.

there seems to be something wrong with the Office for Mac software getting things right on that platform on that machine
Then that would be a question for Microsoft' and their forums. It's up to Microsoft to maintain compatibility with the OS, not vice versa.
when Lion came out, there were others who had some issues wtih Outlook
Lots of sofware has issues if not updated to be compatible with new operating systems.
I was hoping someone who got things right might see this and response.
This has nothing to do with Outlook..it's running as it should. The problem is that the autodiscover feature on your company's exchange server is not configured properly and is telling Outlook to point to that incorrect address. It's up to them to fix the autodiscover settings on the exchange server.

CS4 while Adobe fix the problems with CS5 for Mac?

If anyone from Adobe is monitoring this forum, is it possible for customers who have bought PRemiere Pro CS5 to have access to a fully functional copy of Premiere Pro CS4 while we wait for fixes to two serious bugs in the Mac release of CS5?
The problems with not being able to save project files, and the wrong aspect ratio randomly being selected when importing widescreen DV footage - discussed in threads on this forum - make CS5 unusable on a Mac currently.
thanks.

You randomly get a saved Quicktime file with the wrong aspect ratio.
Ah ha...now that I can fix for you ..if you have QT Pro.
BTW: That behavoiur is typical of QT Player and is not actually random.
Method:
Open your mov in QT Pro
Show Movie Properties (Ctrl-J)
Click on Video Track
Click on Visual Settings Tab
Un check the Preserve Aspect Ratio box
(Here is where you now need to do some math to change the 4x3 to 16:9 ratio)
Divide the Vertical Pixel Dimension by 1.78 and enter the result in the Vert Dimension box
Ensure the Preserve Aspect Ratio box is UNCHECKED
Hit Tab key and notice the image in the QT window change.
In the QT Window Menu - File>Save (SAVE is an IMPORTANT STEP)
Here is an example:
QT movie Original is 320x240
Divide 240 by1.78 ( ie. 240/1.78=134)
Bingo!

PROBLEMS WITH QUICKEN FOR MAC 2007

Anyone else upgrade to Lion only to find that Quicken 2007 for Mac won't work? Apparently Quicken for Mac 2005-2007 was originally built for the older PowerPC architecture, and were able to run on newer Intel-based Macs due to an Apple technology called Rosetta. As of Mac OS X 10.7, Apple has discontinued support for Rosetta.
Intuit is telling me it is an Apple problem. They also say I can buy Parallels and Quicken for Windows to convert the files and recover all my data.

iBank is an application that runs fine under Lion, so it may be able to at least partially migrate the data.
Otherwise the data files themselves have not been modified by the upgrade, though it's unclear what you would migrate them to.
Worst case, you could always downgrade to Snow Leopard or create a Snow Leopard boot disk, and export your files from Quicken for use in say Quicken for Windows.
Here's one of many articles for people in your situation:
Finding a Replacement for Quicken
Though it's very limited in scope, Quicken Essentials may even do the trick for you if you just use Quicken as an e-checkbook register.

Problems with Office for Mac 2011 installation

I'm trying to install Office for Mac 2011 on my new (bought yesterday) Macbook Air
I entered my pin for the Office into the site and got my download link
I started to download it and it said it would take over 4 hours and when the download got to halfway (of 1GB) the installation stopped and the message given was 'You do not have permission to access the requested file' and this came up every time I tried to restart it
I decided to re-install the program but was met with the same issue..
Can anybody offer any advice or explanation for this it would be greatly appreciated!

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions

Print Problems with Elements 9 for Mac

Similar Messages

Maybe you are looking for