Print related issue

Hi
i have created a tabular report . when i click on print attribute of report. there it showing the msg
"Report printing is currently not available, there is no print server configured." how can i cofigured print server.
this problem occurs on local host application.local host is maintained with oracle database 10g release2(10.2.0.1.0) and apex_3.2.1.
Please help me to solve this problem.
Thanks & Regards
Nisha
Edited by: Nisha Rani on Sep 23, 2010 11:17 PM

Hi,
when i follow the instrations at the time of bi publisher installtion. it doesn't ask for instruction of given link as i do next-> next ->it comes to end of the installtion.
is this the case of problem.
http://www.oracle.com/technetwork/developer-tools/apex/configure-printing-093060.html link
Follow the on screen instructions making the following selections
    * For Destination, enter BIHOME
    * For Type, select Basic
      This installs Oracle Containers for Java, Sun JDK, ...
    * Set an OC4J admin password
    * On the final page, 'End of Installation', note the port number. This will be in the URL given that can be used to access BI Publisher (e.g. 9704). You should also note the username and password so that you can use them later if you wish to verify that your XMLP Server is up and running.i have change the port to 9704.
when i enter into url http://localhost:9704/analytics i got the error
Unable to connect
Firefox can't establish a connection to the server at localhost:9704
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.

Similar Messages

Printing CM Issue

I was pleased to find that I can now print from LR 1.1 directly to QTR using CM and QTR Create-icc RGB profiles without crashing (always crashed in 1.0). However, there is still a problem with CM in LR 1.1 when using these profiles. Prints are flat and muddy with low contrast (using either perceptual or relative intent). Same file and profile produces perfect prints when printed from CS3 with perceptual intent and BPC on. I can also get a good print by first converting the image file to the QTR Create-icc profile in CS3 and then printing from LR 1.1 with CM turned off (eg. "printer managed"). It seems to me that LR is not using the icc profile correctly when rendering for printing. Is there a CM fix in the works for the next release?

Hi there @comicsans , welcome to the forums!
I am responding to your post about the printing issue you seem to be having, as your print outs seem to offset by 5cm when printing in landscape, and all print settings and the print preview are and appear to be correct.
I am going to let you know what my personal suggestions are and some steps you could try that might help you.
To start with, you can use this troubleshooting guide that will bring you through steps to help with print quality issues. I am thinking that the printer may need an alignment. The test print you'll print out will show you the results if the printer itself has an issue.
Fixing Print Quality Problems for the HP Photosmart Premium All-in-One Printer Series (C309)
If the test print from the above guide shows no issues, the problem could be within the program you're printing from or a driver conflict.
You can try Uninstalling the Printer Software , restarting your computer, and then reinstalling the printer driver and software. To get the driver you need, click this link, select your operating system, driver and download: HP Photosmart Premium All-in-One Printer - C309g Drivers
It's also a good idea to try printing from another program, which will rule out if one program is solely the problem.
Feel free to let me know your findings and results!
I hope my post was informational, enjoy your Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Print-related task error

How do I fix this error:
Before you can print-related tasks such as page setup or printing a document, you need to install a printer.
I have already have a printer on my computer. I've deleted all drivers and reinsttalled the printer and still gets this error. I've also, reinstalled Adobe Reader 10.1.4.
Any help will be welcomed.

I would install version 11.0.2 but, there is another person on Adobe that posted that they are having issues with printing Adobe 11.0.2. So, I think I'll try to install 10.1.6. I wonder if there is a issue with Windows 7 and Adobe version 10 and 11.

Can't print: "Before you can perform print-related tasks such as page setup or printing a document,

Hello,
I have searched these forums but have not found a solution to my problem.
I recently purchased an IOGear USB Print Server (print server only, not USB device server). I was having issues installing and followed a Microsoft support document to try and resolve the issue. It had me remove some entries from the registry.
Hours later, I was able to get the printer installed and working, but I do not know if it was a result of the registry tweak. But now that it has been installed, I cannot get anything to print from Acrobat Reader (I have tried 7.0 and 8.1.1). I get the following error message:
"Before you can perform print-related tasks such as page setup or printing a document, you need to install a printer."
Is there something I should check in the registry to make sure that it will work? I do know for sure that it was working when it was just the printer and drivers installed, it only happened after running the print server setup. I have already tried removing the printers and drivers from the system.
Thanks,
Braden

I have a problem similar to those posted here, with one difference. With my printers newly installed, regardless of which one is selected as the default, when I try to print from Adobe Reader I receive the error message we're talking about : "Before you can perform a print related task...."
Here's the fun part.
If I click OK on the message, ALL MY PRINTERS GET DELETED and, I get the windows message that "Spooler subsystem app has encountered a problem and needs to close"! If instead of clicking OK I switch to Task Manager and end Adobe, I'm fine and can print from other programs.
I can "reset" the problem by deleting the files in C:\Windows\System32\Spool\Printers and C:\Windows\System32\Spool\Drivers\w32x86, restarting the machine, and deleting then reinstalling the printers (which show up again after the restart).
BUT, if I try to print from Adobe Reader again, I get the same cycle of problems.
I am running Windows Vista and Adobe Reader 8.1

Printer offline issues

Hi all,
3.4 GHz iMac running 10.6.8. Software update current.
Epson NX430 (new) connected via wifi. All installation, including downloading the current drivers from Epson, went smoothly. Printing and scanning wirelessly does indeed work. But...
After a while, the printer, or the Mac printing system, sends the printer "offline." When I send a document to the printer, I get a warning icon from the print monitor, and the NX430 print monitor window says "Looking for printer.... printer offline."
The quick fix for this is to power cycle the printer (obviously a pain). Interestingly, this was the same issue I had with the HP Photosmart 4400 device that the Epson replaced. That HP printer was hooked up via USB, but didn't scan except to PCs, so the switch was to fix that and hopefully also fix the printer offline issue at the same time. But this experience leads me to think that the problem is with the OS, and not the printer.
Other things I have tried: Restarting the iMac. Deleting and re-adding printer. Resetting the printing system (this worked for a few days, I think, although it is hard to be sure of cause and effect). Checking the network connections -- printer and gateway IP addresses are correct, and even when getting the printer offline message, I can successfully ping the printer.
One more thing. When the system is in this "printer offline" state, trying to activate either the printer utility, or check supply levels, results in an error message, even though I have verified network connectivity with a ping test.
Any ideas?
Thanks,
Dave

alicedave wrote:
Checking the network connections -- printer and gateway IP addresses are correct, and even when getting the printer offline message, I can successfully ping the printer.
One more thing. When the system is in this "printer offline" state, trying to activate either the printer utility, or check supply levels, results in an error message, even though I have verified network connectivity with a ping test.
With the ping getting a response from the printer it would suggest that the symptom is not network related but more to do with the supporting software, or more so with the protocols it uses to communicate with the printer. I would guess that the printer supports Bonjour and you would have added the printer by opening the Default Add Printer view and selecting the printer that was shown in this view. If this was the case then a suggestion would be to look at using an alternate protocol for the print queue, providing the printer does support such an option. If you can check the network settings for the printer there may be the option to use/enable print protocols such as LPR. With this active, the printer can be added using IP > LPD. This requires you to enter the IP address of the printer and then browse for the printer driver.
If such an option to use an alternate print protocol does not exist then something else you can test when the printer goes offline is the scanning. Does this also fail?
And can you confirm? You said you had to power cycle the HP to get it working again. Do you have to do the same with the Epson to get it printing again?

Workaround for Reader 10.1.2 print crash issue

Dear users,
Based on the feedback provided to us in relation to the recent Print crash issues on Adobe Reader 10.1.2, we are hereby providing the following two workarounds for the problem faced. Please follow the steps below to get rid of this issue:
WORKAROUND 1:
Go to Start menu to Select Devices and Printers to access all Network Printers installed on your machine. Right Click to access Printer Properties. Open the Sharing Tab and give your printer a Share Name. If you wish not to share your printer then you may choose to give it a Share Name and then select “Do not Share” Checkbox. Please make sure that all Network printers have been assigned a Share name otherwise problem will persist. Please find below the screenshot for your reference.
WORKAROUND 2:
The second work around is to turn off the Protected Mode of the Reader and the problem will be resolved right away. However, it is not advised to keep the application in non-protected mode due to security reasons and it is advisable to turn this setting ON once you are done with your printing task. You can access this setting by going to Edit-->Preferences-->General pane and can find “Enable protected mode at start-up” at the bottom of the window. Please re-start the Adobe Reader after you have made changes to this setting.
Thanks,
Atul Agarwal

Neither workaround 1 nor 2 work for me. I have a very small network, but my printer stands alone on the lan.
I'm running Windows 7 SP 1. My printer is an hp oj pro 8500 hardwired via lan. When I installed Reader 10.1, all printing stopped. It doesn't crash, but finds the printer, starts to process the file, then a "Save As" window pops up and it wants to save the file as a *.pm. If I cancel, nothing happens and nothing prints. If I Save, it takes a long time (> 1min) to process the file (simple text, 1 page), then the status box vanishes and nothing prints. I can't find the .pm file anywhere and there is nothing in the printer's queue.
I installed 10.2.1. Same thing. Tried the patch for 10.2.1 printer crash (even though I'm not really crashing. Just a whole lot of nothing) and same problem.
Reader 10.1.1 on my mac has no problems finding the printer. I'm leery of upgrading it to version 10.2.1 But we only have the one mac, and I'm stuck with the hp pc.

Print quality issues

Hello
We are having print quality issue when printing PDF's to our Canon iR C2880/C3380 UFR II. This was the most recent print driver from canons website which was download about 6 weeks ago. version 2.9. At one time we were having other pring quality issues and we changed from the post script driver to the ufr ii which solved the problem at the time.
This past saturday we upgrade the operating systems on the systems in question and they are now running windows 7 64 bit with service pack 1 installed. image 1 is the orignal pdf that was printed with a 3rd party pdf printer(PDF Xchange view version 2.5) image 2 is the same document that was printed using acrobat reader 10.1.2
the options for the print were pretty much identical between the program. Print as image was not selected. 1 thing to note with the acrobat when print as image was selected there was a slight improvement in the print quality.
Any help would greatly be appreciated.
image 1
image2

Hi, nd a warm welcome to the forums!
Off the bat, it looks like maybe bad RAM/ROM in the Printer, or corrupt Font.
Can you have another Computer jook to it and print for a test?
Can you try Printing from Adobe Reader...
http://www.adobe.com/products/acrobat/readstep2.html
Can you in Preview, Save As a picture format for a test?

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

My setup: iMac hardline to Canon i960 printer. Issue: endless printing of the same document. The printer window states that the pinter is in use and there is nothing listed in the Print Queue. How can I stop printing the document?

Soution: Delete the printer and add the same printer back in, therefore creating a new print queue.

Can we set up a forum for Security related issues?

I know many of us think security is a Windows related issue, but from time to time there are security issues that may come up. I had a question so I looked and couldn't find a forum, so I posted in one of the OS X 10.6 sub forums.
Thanks!

I am a co-founder of Calendar of Updates http://www.calendarofupdates.com/updates/index.php?act=idx This is a site that is primarily a Windows based security forum (I switched about 4-5 years ago). Over the years, I've tried to grow the Mac side of our forum, but, as you may know, there is little or no interest in security within the Mac community. For many, the feel security is a Windows issue.
It's a free site, so don't think I have a vested interest in growing the membership, I'm not an owner, either.
I just created an *Apple OS X Security Issues* forum http://www.calendarofupdates.com/updates/index.php?showforum=209
Right now it's an empty forum since it was created 10 minutes ago. Please feel free to join the forum and share security related issues and questions.
I am not aware of any other forums that deal with OS X security issues
exclusively, so this forum could be a good place to bookmark and visit from time to time.

To everyone with IOS6 Sound related issues & Others

If you are facing a problem of not having any system sounds, notification sounds, no calls or other software sound related issues I'd suggest you read below it's a stupidly simple fix and it should solve most software issues after an immediate iOS6 update:
After updating unplug the phone from your computer and leave the phone alone for 5-10 minutes, if you still have problems: reboot, wait a few minutes and all sound related problems should be fixed.
When I updated to iOS 6 I had lost my system sounds, so I unplugged from the computer, rebooted the phone and still no go. I decided to just let the system "settle in" for a bit, let it lock and when I unlocked after 5-10 minutes sounds were back and everythings up and running again.

Well, to break it down. After my sounds finally came back (2nd time losing them) last night I decided to restore the phone in itunes. I did it twice. First time I backed up my data. Second time I restored it as a factory iPhone. Both times guess what NO SOUNDS! I also realized that last night I had lost my sounds after charging my phone and unplugging it from the data cord. I still have ringtones (when someone calls), but text messages, emails, and any other alert tones do not work. I cannot turn the volume up or down with the side buttons and also music does not play. It doesn't even have a slide bar at the bottom.
I am on the phone with apple care now. They seem to not be aware of the problem at all.
While I was on the phone with them my sounds ended up coming back, imagine that. Hopefully every time I charge my phone I am not going to have this issue.

Many Sporadic Preview Related Issues

Not sure if this is where to post/report Lightroom 5 issues or not, but here are preview-related issues I am experiencing...
Preview panel "preview" freezes indefinitely.
App very slow to load while creating new previews. (previews take forever to create and update)
Wrong previews showing for wrong images when swapping between folders, etc. (ie: all photos, last import, custom collections)
This one is a little different...
Ratings lost when switching between folders, etc. (ie: all photos, last import, custom collections)
This was a clean install that ran beautifully at first. Started noticing this more and more after using the spot tool. (my last step in processing a job)
I use separate catalogs per job. Some as small as a few dozen images. (family stuff) Others, as large as 500-600. (engagement and wedding clients)
Hope you are working on this. It's making work a struggle. I'm not just a "consumer". ;-)

This is a user to user forum so the responces you recieve here will mostly be from users like your self. I am sure someone will respond on how to help dealing with the problem you are experiencing.
The official forum for reporting bugs and making feature requests is at the web link below.
http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om

Hp Color Laser Jet 5550dn Print Quality Issues

Good Afternoon,
I have a Hp Color Laser Jet 5550dn that has some print quality issue. I've attached a black and white scan, but the color is a light blue to blue that form the blotches. On the back of the page there are blue and pink streaks.
I can print more sample pages or print them in color, but anyone have any idea what could be going on here?

We are encountering a similar problem. The streaking is coming fromt the Cyan cartridge and has continued for over a year now, despite numerous cartridge changes and replacing the transfrer case. It is progressively getting worse and I have yet to find a solution to this problem online. Any help or guidance would be appreciated.

HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit

Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Plug in Manager released today doesn't fix print settings issue

The download page says it improves reliability in Aperture and other apps. But it didn't fix the print settings issue in Aperture. I sent feedback on the problem. Try to hit the print settings button after hitting command P. If you have Aperture 2 and the latest security update the settings won't come up. Look at the top of the list for the Plug In Manager update.
http://www.apple.com/support/downloads/

Hopefully an update fixes this. I have had this problem for a long time, tried many different fixes, no luck. Horizontal scrolling works in IE9 however.

Windows 8.1: Printer Offline Issue

Windows 8.1: Printer Offline Issue
If you have seen issues where your laptops/tablets has been taken from a private (home) network to a public network and then not been able to print when returning back to your private (home) network. This is most likely due to the public network settings not being reset back to the private (home) network settings. If this sounds like an issue you are having- try resetting your network settings by following the steps in the documents linked here:
For Ink Printers, please visit this document to help resolve your issue:
Print Jobs are Stuck in Queue
For LaserJets, please visit this document to help resolve your issue:
HP Laserjet - Printer offline and unable to print on a network in Windows 8.1
Install this Microsoft patch to make sure this private-public-private network issue does not reoccur. It is part of the April 2014 Windows Update package for Windows 8.1 and Server2012 R2 (http://support.microsoft.com/kb/2919355).
If you experience this issue before you apply the patch, you must manually reset your network settings for this patch to function. Please refer to the above documents for manual reset help.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Hello All,
The printer goes offline due to proper driver is not installed correctly or if the printer port is not selected correctly.
I would suggest that you check the printer port (if the printer is connected via USB then chck if you have selected USB001,002... OR DOT), if the printer is connected via Network then check if the printer is selected via TCP/IP and then check the results.
Alternatively, you may uninstall and reinstall the driver and then check the results.
Regards,
HP Laserjet team

Print related issue

Similar Messages

Maybe you are looking for