Print to PDF issues after 11.0.03 Update

Hello,
Installed on our site we have Adobe Reader XI as part of out basic build (ie. every PC has it) and Adobe Acrobat X Pro (as part of the CS5.5 Master Collection) for those users that request it (meaning that we have both versions installed side by side on some PC's). During our most recent update cycle we upgraded Adobe Reader XI to the latest 11.0.03 update which has seemed to upset our PC's that have Acrobat X Pro installed on them.
It appears that the 'Adobe PDF' printer that is installed by Acrobat X Pro no longer works, and trying to print to it gives the following error; "Windows cannot print due to a problem with the current printer setup". To try and see if it would resolve the issue I pushed out the 10.1.7 Acrobat update to a small number of test machines but it hasn't made any difference.
Is this a known issue? Any ideas on how to resolve it or if a fix is coming up?
Thanks, Dave.

Please try following steps:
1. Open Reader.
2. Go to Edit -> Preferences.
3. Select category - Enhanced (Security)
4, Uncheck "Enable Protected Mode at Start up" option.
Regards,
Anoop

Similar Messages

  • I can't print my PDF form after it is filled out.  Only the form prints not the text that I put in

    I can't print my PDF form after filling it out.  Only the form prints and not the text I put in.

    That's a limitation of Apple's AirPrint framework that Adobe Reader depends on.  We are considering an alternate solution that may resolve this issue though.
    Thanks for your feedback.
    -Gaurav

  • Cannot print a PDF file after upgrading to Windows 8.1

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

    Cannot print a PDF file after upgrading to Windows 8.1
    I can print anything else from either the Desktop or Start but not a PDF.  No error message but just does not print.
    Update: down loaded Adobe Reader which runs on the desktop so when I read a PDF file it now runs on the desktop and I can print it.

  • Iphone 5 issues after IOS 8.2 update: my husband's phone and my phone get the same phone calls ONLY when we are home.  Any suggestions on where to look to fix this?

    Iphone 5 issues after IOS 8.2 update: all the iphones in the house receive the same phone calls ONLY while we are at home.  Any ideas on how to fix this?

    That is a new "feature" described in Connect your iPhone, iPad, and iPod touch using Continuity
    You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off

  • Why do old Adobe PDF files which I attach to a document show as Firefox files instead of an Adobe PDF file after an Adobe Reader update??

    Why do old Adobe PDF files which I attach to a document show as Firefox documents in my files instead of an Adobe PDF file after an Adobe Reader update?  My saved files Adobe PDF documents also appear as Firefox documents instead of Adobe PDF files.

    NO MATTER WHAT VERSION OF WINDOWS YOU'RE USING:
    Right click one of the PDFs with the Word icon.
    Select "Properties"
    Where it says "Opens With" there is a button to change it from Word to Adobe Reader, which should be in the list of available programs that pops up.
    Choose Reader, and click APPLY before clicking OK.
    That will change ALL PDFs to Reader as the default application.

  • Is there any fix for the bluetooth connectivity issue after most recent OS update?

    Seems to be a common problem particularly with bluetooth headseat connectivity. Any ideas?

    There is no bluetooth connectivity issue after the recent OS update. There may be a problem with your phone, which may or may not be related to the update. A "common problem" looks like this in the forums:
    I haven't seen any threads on BlueTooth with over 1.4 million views and over 12,000 replies, or even any vaguely close. For any problem that someone has there is bound to be someone else amoung 150 million users who have it. That doesn't make it a "common problem."
    If you tell us what the problem is specifically and what you have done so far to try to resolve it someone can probably help you.

  • No "convert to pdf " and no " print to pdf " option after install

    I installed adobe acrobat reader professional 8 at home ( WIN 7 ) and everything works great there, but after installing it at work ( WIN 7 ) i have no option when i right click a file in the drop down menu that says " convert to adobe pdf ", and also in word i have no option to " Print to  PDF " in the printer menu.
    Thoses options are on my home PC but not work PC ? the only thing i can think of is a USER RESTRICTION that is in place that does not give my user account the option to use thoses two options ?
    Im I wrong  ? and if so how can i get thoses options at work like i have at home ?
    TY for any help giving

    cyberskin99 wrote:
    I installed adobe acrobat reader professional 8
    First, you either have Adobe Acrobat Pro 8 Or Adobe Reader 8. Acrobat Reader Professional 8 does not exist.
    If you have Acrobat, we'll try and work this out. If you have Reader, you don't get either of those items since it's made for viewing/printing PDF's.
    My suggestion is to open the application you installed then go to the Help dropdown and see whether it says Acrobat or Reader. Also, be sure you don't have both products installed since that could cause similar issues as this.

  • Printing to PDF broken after installing a font manager

    I'm currently trying to figure out why after installing Extensis suitcase printing to PDF is broken.  I have tried the following fixes that I have seen so far
    I have gone into distiller and removed the other font locations in there and just supllied windows\fonts
    I have gone into control panel regional and language optionss and checked the install files for complex script
    I have gone into pdf printing options and unchecked the rely on system fonts only
    I have also gone through and removed and readded the windows font files. However if the adobe fonts are removed it makes the distiller window huge and can't be restore even with removing and reinstalling acrobat.
    Using the above I have gotten two pc's to work but the third continues to give me the following error.
    %%[ Error: invalidfont; OffendingCommand: findfont ]%%
    Stack:
    /Font
    /Courier
    /courier
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%
    Currently the system is using acrobat 9 pro and extensis suitcase 3.  I'm not sure where to go from here, I have tried to find any related posts but I have seen anything that I haven't already tried.  Let me know if anyone has any ideas or needs more info.
    Thank you

    I am not very good at reading the Distiller error message. However, it is saying a font can not be found. Temporarily, go into the job settings file and select warn and continue or ignore for the embedding fonts warning. The default typically is set to fail. After you get a PDF, check to see which font is giving you problems. The fonts have to be included in Distiller or you will get this error and failure of you do not have one of the first two options selected. Don't know if that will help, but it is something to look at.

  • IPad2 Issues after iOS 8.1 update

    iPad2 64g wifi + cellular -   very slow and non-responsive since iOS 8.1 update.  nonstandard Apps seem to be working fine.. it’s the standard item like photos and safari that don't  respond. 
    photos -  (which I use daily to show clients examples)  will freeze and kick me out back to the home page when trying to do anything from open a photo for viewing to trying to delete a photo. Edit.. forget it.   better off using an alternate app to edit a photo as it locks up and crashes every time.   I really need to be able to view the photos  on my iPad2
    safari -   good luck using any hyper link…. It doesn’t respond.   Even at Apple’s website.   Sometimes it crashes but most of the time it just ignores me like I haven’t touched the screen
    Overall - the touch screen is glitchy since the iOS 8.1 update.  It was slow after the iOS 8.0 update  but has become almost unusable after the 8.1 update.
    I cannot afford to purchase a new iPad.  And I really need to find a way to make this one work.
    I did read about how to restore to an older iOS version.   The only problems are all of my laptop is Windows based and the instructions assumed you had a Mac.   I did a backup to iTunes prior to the 8.0 update but I have also done backups since.   So I am not sure I have a “clean” iOS 7 backup.
    Any ideas would be appreciated   Thank you in advance for your help
      Deborah

    zooga wrote:
    safari -   good luck using any hyper link…. It doesn’t respond.   Even at Apple’s website.   Sometimes it crashes but most of the time it just ignores me like I haven’t touched the screen
    For the touch issues in Safari, does scrolling or zooming the page before you try to tap a link make it work again?  I've read a few posts that this may be a workaround for that issue.

  • Unable to print to Canon ir2022i after 10.6.7 update.

    Ever since the latest system update we've been unable to print to our imagerunner 2022i.  We've downloaded and installed the latest driver (2.24) to no avail.  We've downloaded and installed the driver update package from Canon...no dice.  The only way it works is to setup the printer with a generic pcl driver, but the quality is terrible. 
    Are we stuck until canon updates the driver or apple updates system software?  Not being able to print in a small office for over a week is insane....

    The 10.6.7 update introduced an issue with the UFR2 v2.23 and earlier versions. For the imageRUNNER devices, a window would appear stating that the Graphics Mode needed to be changed from UFRII to Raster. If you then opened the Quality menu of the UFR2 driver and selected the Quality Settings tab, here you would see the Graphics Mode section and enabling the Raster radio button would allow the job to be printed.
    This issues was resolved with the release of the UFR2 v2.24 driver. But this driver does not completely overwrite the older version, so it is necessary to trash the older UFR2 driver before installing the v2.24 driver. The following steps will remove the UFR2 driver from the Mac.
    1. Open System Preferences > Print & Fax, select the UFR2 print queue and press the - (minus) button to remove the queue. Exit from Print & Fax
    2. Open Finder and navigate to HD > Library > Printers > Canon and trash the UFR2 folder
    3. Still in Finder, navigate to HD > Library > LaunchAgents and trash the file "jp.co.canon.UFR2.BG.plist". Exit from Finder.
    4. Open Activity Monitor and select the entry "UFRII Backgrounder" and then Force Quit. Exit from Activity Monitor.
    The Mac is now ready to install the new v2.24 of the UFR2 driver.
    If your issue is not the Graphics Mode message appearing, then can you please describe what error you are having.

  • Display Issue after 10.9.2 update

    After updating my Macbook Pro with Retina to 10.9.2 -- My display flickers for a second after sleep and or blank screen and then goes back to normal. Has anyone else been having display issues after updating?

    Yes similar problem here: I have a MacBook Pro, 15 inch Retina, Mid 2012, and when I connect a secondary display via HDMI (and also HDMI-to-Thunderbolt) then the external monitor becomes the main display.
    I have not figured out on  how to switch back to former settings. My guess: it's a bug. A quick search confirms that many others have secondary display issues since 10.9.2
    (Steve would have fired those lazy punks, who failed to do sincere testing before release …)

  • Not Able To Print w/ Lexmark X2600 After Recent Airport Firmware Update

    Hi,
    So, after the recent firmware update for the Airport Extreme (802.11n), I can no longer print to my printer share. The device is recognized in Bonjour, and I use the correct driver as I did before, but when I send something to the printer, it just reads:
    "Connecting to MyNetwork.local...
    There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or hold the job and try again."
    Now, if I connect the printer directly to my computer and set it up with the same drivers over USB, it works just fine. Can I get some support on this?

    Hi,
    Have you tried this?
    To change the printer’s network settings:
    1. Open the printer's embedded Web server.
    2. Click the Networking tab. For wireless settings, click Wireless. For IP settings, click IP
    Configuration.
    3. Change the printer's settings to match the settings of the network, then click Finish.
    4. Close the printer's EWS, then disconnect the Ethernet cable from the printer.
    5. The control panel lights will cycle.
    The previous procedure is from the Wireless Printer User Guide for your printer.
    Best regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How i get by with the sleep, pause issue after 1.0.2 update

    ok. i'm sure you guys are aware of the ipod sleeping/pausing issue after updating your ipod to 1.0.2. my ipod will pause whenever it is in the jensen dock station and the green battery indicator shows up. whenever i use the dock or remote to unpause the song, a few seconds later, it pauses again. so instead of using the dock or remote to play, unpause, whatever, i connect the ipod to the dock and use the wheel to navigate and 'only' use the play/pause button on the ipod itself to kick off the playing of music. if i go back to the remote, the ipod pauses. if i only use the menu and play/pause button on the wheel, my songs do not pause. it sure was nice using the remote before 1.0.2. i mean, it did come with the dock for my remoting pleasure but alas, i shall wait on the next update. hope this helps someone.

    I will have to try that... I took my iPod to work today and plugged it into my JBL docking station and it was skipping. I did notice it seemed to go to sleep more often when I used the remote... There's a whole other forum on this maybe you could check out too. But it's really annoying and I hope Apple comes out with a fix soon! I will definitely try to use the iPod wheel tomorrow and not the remote.

  • Massive battery drain issues after the latest software update - phone hot

    After the latest software update (to the NI2 version) I have massive battery drain issues. The phone also stays hot. Even when I don't actively use the phone it seems to stay "awake" according to the stats. When I disable all data (Wifi and/or 3G/4G) it's perfectly fine. Does anyone else experience the same issues or has recommendations?

    Is the device trying to sync all your photos with the cloud?
    This is what I would do.
    Back up your photos and music onto a personal computer. Copy down important settings like for your email, and contacts you can't risk losing.. even icon placement of important apps. Diagram it out.
    Then perform a Factory reset on the device. Alternatively you might find the procedure for wiping the low level cache of the device posted in other posts on the site. That might fix the problem and avoid you losing settings and content on your device.
    Extremely bizarre behavior post updates are usually associated with low level cache issues that cause the OS to behave poorly.  Some people have reported their phones running hot and that could mean the radio is on constantly attempting to back stuff up to the cloud our restore stuff.
    Good luck.

  • Satellite 100-192: Issues after the latest MS update...

    Satellite 100-192.
    After the latest MS update I first had the problem with the Realtek sound card driver. I solved it by applying the patch MS provided.
    Now the problem is that the disc cleanup utility does not launch. Anybody any idea?

    I just found out that my disc cleanup utility would not work because of a free program called Photo Toolkit. Although it is a nice little program to quickly edit photos, apparently it causes such problems when it is loaded.

Maybe you are looking for