Printer driver for lexmark x6570 does not appear in printer setup utility

Hi
I have just bought a lexmark x6570 wireless printer and have installed the driver on my powerbook, set up the printer (using a usb lead as instructed) but am unable to print anything as the printer driver does not appear in the printer setup utility. I have even tried to move the folder that was created on the desktop to the printer folder in the library folder but still no joy.
Someone help me please!

@YDNA1958 
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

  • TS3147 I seem to have lost fax capability with Snow Leopard. Does not appear in Print as before. Cant find fax in system Preferences. No drivers for fax found Bob Wines.

    I seem to have lost fax capability with Snow Leopard.
    Does not appear in Print as before. Cant find fax in System Preferences. No drivers for fax found.
    Initially said it was downloading software but no longer does this. Fax test works on HP site.
    Using HPC410aHP Photosmart Premium
    Any help would be appreciated.
    Bob Wines.

    Thanks for your detailled description of the faxmodem installation!
    I've tried this with Mac OS X v10.8 Mountain Lion and it works fine.
    I've to type "cupsctl WebInterface=yes" in terminal to see the interface.
    Does anybody know, if send faxes are saved somewhere?

  • Epson r800 prints, but does not appear in Printer List: can't use Utilities

    My Epson r800 prints, but does not appear in Printer List. It is connected via USB to the iMac. A Brother LH-2070N is connected via AirPort Extreme. I need to use Utilities to clean the head of cartridge, check levels, etc.. Is there a way to fix this problem?
    iMac   Mac OS X (10.4.9)  

    For your Epson try this:
    Hard Drive, Library, Printers (folder), Epson folder,
    Inkjetprinter folder, Utilities folder and here you
    will find Epson Printer Utility2. Click on it and it
    should work.
    Note. Epson utilities will not work unless the
    Printer is directly connected to the computer.
    Had the same issue with my 2200 photo and the above
    worked.
    Tried again after reinstalling the drivers. There is no separate Inkjet Folder, but the Printer Utility is within the Epson folder. Unfortunately, the r800 still does not appear in the Printer List, hence no utility.

  • My disc drive on my imac does not appear to be working. It takes the disc in but then spits it out without reading it. I have thought about purchasing an external disc drive, can someone advise me please?

    My disc drive on my imac does not appear to be working. It takes the disc in but then spits it out without reading it. I have thought about purchasing an external disc drive, can someone advise me please?

    Try the following:
    In Finder, select the problematic volume and then press command-I.
    Expand the Sharing & permissions section if it's collapsed.
    If the section is locked, then unlock it by pressing the padlock button and then authenticating as directed.
    Tick/check Ignore ownership on this volume.

  • I replaced the original hdd in my early 2008 iMac.  I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant.  When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!

    I replaced the original hdd in my early 2008 iMac.  I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant.  When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!

    I'd recommend staring over, Pondini has created an excellent guide on how to use Setup Assistant. I'd recommend begin reading Pondini Setup Assistant tips where he talks about "Second Chance." Assuming your Time Machine backup is sound the restore  should be very smooth.
    Roger

  • My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

    My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

    Restart your WiFi router and printer by removing power for 30 seconds.

  • I have the latest ipad2 and trying to print a doc. It does not find my printer . My printer is a canon mp990 wifi

    I have the latest ipad2 and trying to print a doc. It does not find my printer . My printer is a canon mp990 wifi. Can anyone tell me what I am doing wrong?

    Hi,
    If you are trying to utilize AirPrint you need an HP compatible printer listed here.
    http://www.apple.com/ipad/features/airprint.html
    Scroll down.
    Carolyn  

  • MacOSX (10.9): Print dialogue box does not appear when printing PDF's

    Hi there,
    I've been having some troubles with the latest version of Adobe Reader on an intel-based MacBook Pro running MacOSX 10.9 (Mavericks).
    Environment Details:
    Device type: MacBook Pro
    OSX: 10.9 (Mavericks)
    Adobe Reader version: 11.0.06
    Details:
    After installing Reader 11.0.06, the print dialogue box does not appear through the print button or through File -> Print... . As a result, I simply cannot print PDF documents when using Adobe Reader.
    - Only 1 MacBook Pro affected
    - The print dialogue box does appear for other application (i.e. Preview, Word, Excel, etc., etc.)
    - Multiple restarts performed
    - Attempted to download older versions with no success
    - Attempted multiple uninstall/reinstalls
    - Reset the CUPS printing system multiple times
    - Validated that the account accessing/using Reader has full administrative privileges to the Adobe Reader application
    - Occurs for multiple PDF's from various sources
      -> Online source
      -> Converted from Word
    Additionally (I'm unsure if this is related or not), but after trying to perform an update, I receive the following error:
    An unimplemented or obsolete function was called
    Any help would be greatly appreciated.
    Cheers!

    Hi there,
    Just bumping this thread for more visibility.
    If anyone has any thoughts, I'd more than appreciate your advice!
    Cheers!

  • I have bought a Griffin car charge for Iphone4S it does not appear to charge in the car can anyone advise me on a remedy (uk)

    I have bought a Griffin car charger for the Iphone4S it does not appear to charge in the car, charging at home no problem.
    Has anyone have any ideas as to whats happening?

    Have you considered you may have a duff Griffin charger .
    and / or is there power at the point you are plugging in the charger

  • U300 Touchpad Driver for Windows 8 Does Not Load Properly

    I have spent a few hours with both Microsoft Premier Technical Support and (a very grumpy) Lenovo technician. They have both confirmed that the Windows 8 touchpad driver that is currently posted on the Lenovo site for the U300S does not load properly. It will, as many have reported, disable the touchpad altogether. There seems to be an issue with the loader installing files for both a Synaptics and a Cypress touchpad. This creates an apparent conflict that relegates the touchpad as useless.
    If you choose to install this driver, I would recommend that you create a store point so that it can be easily recovered.
    A standard mouse works just fine (albeit without any Win8 functionality).
    ***Lenovo should pull this damaging driver down from their site until a certified replacement can be prepared.***

    Hi, 
    If the computer is OEM, please refer to the user guid manual to know how to boot into WinRE to recovery your system. 
    Meanwhile please try to enable or disable Secure Boot by referring this article: 
    Secure Boot
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03653226
    Kate Li
    TechNet Community Support

  • Adobe PDF Does Not Appear In printer List

    My computer runs Windows XP. Acrobat Standard 6 is installed. "Adobe pdf" does not show in the list of printers. I have installed all available updates, but it still does not show in printer list. I have done a google search on this and have come up with nothing. Any assistance would be greatly appreciated.

    Try to re-install it, after deleting all folders from previous instalation. If still not works, lets see, are you the adm of your network? If not, may this is a network permission while trying to install a new printer. It can be different versions of acrobats installed at same computer too.

  • Officejet 7410 Driver for Windows 10 does not find my wired (Ethernet) printer during installation

    The driver apparently didn't install completely because I can't run HP Solution Center. I can access the web server on the printer by using the IP address in a browser.  I set it to a static address. The driver seems to install except that it won't find the printer when I select a wired network printer. This printer has been working for years with Windows 7. Surprisingly, I can still print, but I can't scan since the Solution Center won't run. If I use the print and scan doctor, it tells me I need a new driver, but if I then try download it from that program, it always fails. I have installed the driver with a data of Aug 3 2015.  That seems to be the latest one. I don't know whar else to do.  I need some help.

    Welcome to the HP Community , I hope to help you with the installation issues you're having with your Officejet 7410 on Windows 10. Below are some suggestions I have for you to try. Let me know what happens. If you see any error codes or messages, please tell me the specifics. Start with power cycling the network devices:
    Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
    Plug the router back in and wait another minute, next turn on the printer and computer.  Perform a Clean Boot on your computer:1. Begin by typing “msconfig” in the Cortana Search Box and then click on MSConfig (Run Command)
    Or on your keyboard press the Windows + R key at the same time and type Msconfig in the run window, then click on OK or hit enter.
    2. Now choose Selective Start-up
    3. Remove the check from Load Startup Items
    4. Click on the Services tab
    5. Check “Hide all Microsoft Services” and then click on Disable All
    6. Click on Apply and then on OK. 7. Click this link to download the full driver and software: HP Photosmart and Officejet Full Feature Software and Drivers Now open up the software and try scanning, and try printing too! Reminder: Go back in to the Clean Boot instructions and enable the start up services!  Good luck Show thanks for my reply to help you today by hitting the "thumbs up" icon below!    

  • Spouse name sometimes does not appear on printed labels - why?

    Last year, this forum helped me figure out how to get spouse names onto my Christmas card labels. Thanks! This year, I want to fix a tiny problem that came up last year. For some reason, about 10% of the labels do not include a spouse name, even though I have included the spouse's name in the 'spouse' field on the address card, in the same way as all the other cards. There does not seem to be any rhyme or reason to why some of the records will print with a spouse's name and others don't.
    Any thoughts?
    Our solution last year was to hand write the labels for the envelopes that were incomplete. This year, I thought I'd spend at least a few minutes trying to solve the problem before resorting to that.
    Thanks!

    I have experimented with this a great deal, with great frustration.This is indeed a very bug ridden area of Address Book.
    For instance, try the following: pick one of the spouses (similar problems exist when using partners) that won't print, then edit the spouse's name by inserting a period (.) at the front. E.g. change "Larry Stewart" to ".Larry Stewart", then see if the spouse's name appears on a label. Most of the time mine would, but if you take the period out again, you guessed it: no label. What kind of sense does all THAT make????
    Also, be aware that the main contact must have both a first and last name.
    When working properly, contacts and spouse with the same last name print as "Joan and Larry Stewart." When the last names are different, as typically with partners, you get "Joan Armatrading and Larry Stewart." Quite nice....except when it doesn't work at all, which for me has been about 50/50.
    I came on here today to find out if anyone knows of any downloadable or hard copy documentation for Address Book so I could see if there is an actual spec for entering data to print these kind of labels. Sometimes Apple has tech notes about stuff. Has anyone seen or heard of anything like this?
    Thanks, Patrick

  • One field is visible in print preview but does not appear when printed

    Hi,
    We have a batch job that creates the spool, but one field of the form is visible during print preview of the spool but is NOT visible in the print out.
    How do we solve this?
    Is there an error in the printer?
    Thank you!
    Rgds,
    Freishz

    Hi guys,
    The catch is, when re-printed, it already appears. But after the batch job has been completed, this does not automatically appear.
    This involves, output type of a delivery.
    Thanks for your reply!

  • Mapping Network Drive for external user does not work

    I want to map a beehiveonline.oracle.com network drive. I am using https://beehiveonline.oracle.com/content/dav/# as mentioned in the FAQ.
    Using https://beehiveonline.oracle.com/content/dav/ (without the #) does not work either.
    I am able to map this network drive when using [email protected] as user.
    However when trying to do this for the user [email protected] I am not able to map the drive.
    I am testing this in order to simulate the client to map the network drive.
    Logging on the beehiveonline with the user id [email protected] works fine.
    Your help will be greatly appreciated.

    Ah, We have had one other case of this where an account can access BeehiveOnline OK but cannot get the webDAV to work.
    I did notice a few login failuers stating your account did not exist on the system. This can sometimes happen if there is a conflict between username and loginid - I have set them to be the same and this may help.
    Try again and let me know how it goes.
    Phil

Maybe you are looking for

  • [SOLVED]Unable to boot into the kernel I compiled, kernel panic

    I try to compile a kernel myself and boot into it, and I use virtualbox to test it. (arch guest inside my arch host)  I first copy /proc/config.gz of my guest system to the linux source code directory, rename it to .config, and just compile it. After

  • My inbuilt mic is muffled in logic studio

    i use logic pro 9  studio i use a tascam 144 audio interface to record - this is old and i get a lot of interference with audio input mic and need to replace but that is another issue ISSUE IS : when i wont to record something off the hoof maybe a me

  • Problem with custom_logic badi and it_param - ujk_large_string 1024

    Hi experts, I have a Problem triggering a script with custom logic badi. I try to implement a data and comment copy package for alle dimensions with source and target. Target is pushed in one string to IT_PARAM table of type UJK_T_SCRIPT_LOGIC_HASHTA

  • Released Process Order

    Hi All, From Which table we can fetch the RELEASED Process Orders. Regards Deekshitha.

  • Email Server Constantly Down

    "Oops! Something just went wrong on our server! We've logged the problem and will fix it as soon as possible. Sorry for the inconvenience." This problem has existed for days. I have never successfully been able to send an email message to my printer.