Printer not working intermittenly since I hooked up my airport extreme?

I hooked my printer up through my airport extreme. I had everything working fine, but twice now it wont let me print. I dont know what is going on?

I ended up disconnecting the usb from my printer from the powered hub, reconnected then it worked. Anyone have a explanation for this?

Similar Messages

Tecra M5: finger print sensor is not working properly since a drink was spilt into the keyboard

My finger print sensor is not working properly since a drink was spilt into the keyboard. When booting up, it automatically "fails" 5 times in a row (without any attempts to swipe a finger), then defaults to password entry to boot the machine's hard drive.
This is not a problem and all i want to do is disable the finger print sensor, but cannot work out how to do this. I've tried uninstalling the driver, which I seemed to do without any problems, but when rebooting, the sensor still seems active, and still goes through the same process.
Everything else works fine and this is just a minor niggle, but I'd like to remove the annoyance of it beeping at me 5 times while it does its thing!
Can anyone tell me how I completely disable it?
Thank you.

Have you removed the fingerprint software? If yes check if in device manager is listed some unknown device. Please post the result.
Maybe you can try to disable this unknown device and it will not be recognized as new hardware every time when you start the notebook.

Canon ip4300 printer not working since restore of back up to replacement hard drive

I have submitted a question to Canon, but thought I'd see if anyone has had this issue here.
I had to replace my hard drive due to a failure.
Then I restored my iMac from a TimeMachine backup. That worked fine.
Now though the Canon ip4300 printer I was using successfully before the new hard drive and restore is no longer working. The print status window says i need to install software to use this printer.
However, it definitely worked before the restore.
Canon does not appear to have any drivers for OSX 10.10. However, I was hoping to get this older printer to work again since it was working on Monday just fine before the drive failure.
Thanks in advance for any advice.

What system were you running before the drive failed?
First try the fix discussing in this Apple document: OS X Yosemite: Reset the printing system
Next, if you have Time Machine backups try the following;
1 - go to the HD/Library/Printers folder and select the Canon folder.
2 - enter Time Machine and go back to just before the drive crashed.
3 - select the Canon folder and restore it.
4 - run Disk Utility to repair disk permissions.
5 - try the printer.
This is what I had to do when I upgraded my system for my older Canon i850 printer.

Windows 8.1 pro 64 bit - finger print not working (sony viao 15126pab)

http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-pro-64-bit-finger-print-not-working/664d9ca8-a0ea-479f-851d-3631e3c1404c hi i am using sony svs 15126pab  2 days before firefox hanged so i forcefully shutdown the system , after rebooting fingerprint not workingthen i go to device manager i found biometrics working properly , 2, 3 times restarted then also finger print not working, then i checked the authentic true suite " its giving error message box and closing every times then i uninstall authentic true suite and installed again ,it asked registration and i registered but i didn't see the finger enrolling options in the software . i enabled biometrics options in administrative templates (components) , other options also enabled in services restarted , reinstalled from Sony Store - nothing helps..................... please help me ,,, i cant enable the add option of fingerprint in sign in options in settings.. the add option is like deactivated , no biometrics tool in control panel, no fingerprint enrolling option in authentic true suite . i purchased the system with windows 8 pro then upgraded to 8.1 now its reserved to windows 10 . so pls give me some solutions to rectify this problem

I cant access any printers, not even the virtual printers.
What I would do is use ProcMon to find out why that Event entry was written. Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable. Since IE9 there have been new .dll involving printing
which have not been reflected in any of our repair tools. However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
unreliable techniques.   E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.)   For example.
Robert Aldwinckle

IPad 2 was updated to latest iOS 7 and has been not working right since. I have tried to do a restore but still continues to go into reboot mode by itself and very erratic. Can no longer trust it. I tried to complain to Apple but have to give them 20 buck

iPad has not worked right since it updated to latest software. Tried to question Apple about it but it costs 20 bucks just to lodge a complaint. Is this normal Apple behavior or am I missing something. Also anyone else having issues with upgrade to iOS7. It was working great until that point and now goes into reboot mode often and sometimes will continuously reboot several times. I have tried to restore but that didn't clear the problem. Any thoughts or help would be appreciated.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

HP Laserjet 1320 attention light on, printer not working.

I checked for paper jam, reseated printer cartridge, removed and reinserted printer and line cord plugs. Turned printer on and off. Attention light remains on and printer not working.

Hi Robert8695,
Let's manage one issue at a time. Regarding the error "unable to establish a two-way connection with the device", check out the link below for troubleshooting you can do to resolve it:
http://goo.gl/u3Snr
Let me know what happens and if the other problems persist as well.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Can't use my HP Deskjet F4580 Wireless Printer with the AirPort Extreme Base. The printer is NOT connected at the USB port of the AirPort Extreme, and is placed in another room. It worked just fine with my previous router (Linksys WRT54G). Help me!

Hey Guys!
I just got my AirPort Extreme Base, but I can't use my HP Deskjet F4580 wireless printer with it.
The printer is not connected to the AirPort Extreme's USB port. It is placed in another room, and I'd like to use it (the printer) wirelessly (not connected to the USB port os the AirPort Extreme), as I used to. There is no place for the printer close the AirPort Extreme. It worked just fine with my previous wireless router (Linksys WRT54G). I'm very disappointed with the AirPort Extreme Base Station because of that!...
Can you help me? Please?!
Thanks Folks!

This must be a tough one, no suggestions at all.

Printer not working following iPad uodate

Printer not working following iPad upgrade

Hi,
Is the printer not mechanically working or are you having a problem with printing wirelessly from your device? Was the upgrade to the ipad software or did you get a new ipad?
Try restarting your apple device - It's a simple fix that sometimes helps re-establish the connection to the printer.
Other things to check would be that there have been no recent changes to the wifi password.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

My music app on my iphone 5 is not working properly since I downloaded ios7.

The music app on my iphone 5 is not working properly since I downloaded ios7.
Sometimes I start to use the music app and then part way though a track it stops. I try to re-start it with no joy. I'm also finding the touch screen is less responsive. Can any help me fix the issue or will I need to take it into the store?

Removing the SIM has no affect on the power of the phone. It is just the part that facilitates connecting to your carrier. Try holding the sleep/wake and home buttons together until you see the Apple logo on the screen and then release the buttons. The phone should reboot. You may need to hold the buttons together for 15-30 seconds.

My trackpad is not working properly since installing the upgrade. What should I do?

My trackpad is not working properly since installing the upgrade. The keyboard is also not working right. What should I do?

i am getting the same issues. i have to use an external mouse but i still get moves even without touching the mouse or trackpad. i upgraded to maverick about 2 months ago. how can i fix this fast? am a dj so i really need this problem fix. and now my keyboard is acting up even while i type

File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13

File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
Thanks

I hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print

Wireless printer not working after 10.5 upgrade

My Canon All-in one MP600 was working fine using 10.4.11 and Airport Extreme Base Station. I upgraded to 10.5.4 and now the printer does not work. I checked the Airport utility and the printer shows under printer. The printer works fine on my wife's MacBook. The old printer setup utility app is not present on 10.5. Am I missing something? I followed the instructions to install the wireless printer but it still does not work. It works fine when I use the USB cable directly to my powerbook G4.

Found problem. Removed printer from Sys Prefs -> Printers and Fax and re-installed it. Works now.

Music/iTunes Match not working properly since update to iOS 7

Music/iTunes Match not working properly since update to iOS 7

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Printer not working via usb connection to airport time capsule

I bought an airport time capsule 3 TB, and I wanted to connect my multifunctional printer-scaner "canon i-sensys MF4350d" via usb to my airport device.However, I found a problem. Although my printer working properly in direct connection via usb,not working when connected via usb to my airport time capsule. when I chose printer In nearby printer list this error apeared:"the software for this printer is currently unavailable please contact the manufacturer for latest version" when I chose add printer and chose the printer model this error apeared:"the printer information has not been acquired"
devices:
printer: canon i-sensys MF4350d
air port time capsule 3 TB
macbook pro me664
osx mountain lion 10.8.5 (latest version)
printer software:canon UFR II ver 2.43(latest version for my printer)

Login to airport utility via Mac or windows pc. Look under connected usb devices and it should say your manufacturer for the printer. If not try rebooting both printer and router with them being plugged in or try different usb cable or port on printer.

OSX: Connecting to admin session not working anymore since 8.0.12

Hey
It seems to me that connecting to console session does not work anymore since the recent update to 8.0.12. Had no troubles before the update, now it does not connect to the console session but a normal one. Please fix this.
Mac OSX 10.9.5, Apple Remote Desktop 8.0.12
Cheers, Marcel.

Hey Dharmesh,
Thanks for your reply. I mixed up terms. I cannot connect to the "admin session", in my last message I used the term "console session", sorry about that. Connecting works, but it connects normally instead of the admin session. Checkbox
"Connect to admin sesssion" is active.
In the logs I found the following message. Not sure it's related to my problem.
Cheers,
Marcel
[2014-Dec-11 08:20:11] RDP (0): correlation id: 012580ec-dbe5-8db2-a2c0-1c58dfb00000
[2014-Dec-11 08:20:11] RDP (0): Resolved 'replaced.host.name.com' to '1.2.3.4' using NameResolveMethod_DNS(1)
[2014-Dec-11 08:20:11] RDP (0): Exception caught: Exception in file '../../librdp/itotlayer.cpp' at line 875
User Message : Security negotiation Error: NotAllowed(2)
[2014-Dec-11 08:20:11] RDP (0): correlation id: 012580ec-dbe5-8db2-a2c0-1c58dfb00000
[2014-Dec-11 08:20:11] RDP (0): Resolved 'replaced.host.name' to '1.2.3.4' using NameResolveMethod_DNS(1)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Dec-11 08:20:11] RDP (0): **** User ACCEPTED connection to basic security host
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Dec-11 08:20:11] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Dec-11 08:20:40] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Dec-11 08:20:40] RDP (0): Protocol state changed to: ProtocolActive(5)

Printer not working intermittenly since I hooked up my airport extreme?

Similar Messages

Maybe you are looking for