Printer problem with Airport Utility and Epson CX5500

Hi,
I recently bought an iMac '24 2.66 Computer and was able to set up my internet through an airport. When it came to hooking up a wireless Epson CX5500 printer, the airport recognized it, but when it came to print in the printing queue it simply wont print. I was able to find a very helpful post that would possibly be my next step in fixing it (probably just a program error or hook up)
Here is that post:
ideapod
*Posts: 5*
*Registered: Jul 16, 2007*
*Re: Problem connecting a Epson USB Printer*
*Posted: Sep 29, 2008 5:42 AM in response to: tonys28661 *
+Hi there,+
+I had the same problem, but with an Epson CX5500.+
+Firstly, BTW - I found out there IS a list of supported printers: http://support.apple.com/kb/HT1370?viewlocale=en_US. Before you scream - "that's leopard you idiot"; in the table, if the printer is listed with a MODERN driver, then it will work with Airport Base Station - eg TimeCapsule.+
+Next. My problem was solved by deleting the spaces put into the printer name by timecapsule. When the printer is recognised it was called "Epson CX 5500". My Macbook printer service then set up a Queue which was mdns://...Epson%20CX%205500... Note - substitution of %20 for space in the name. I removed the spaces from the name via airport utility, manual set up, printers. Now the macbook could print to it.+
Cheers,
Mark
The problem that i have is the step by step process of altering this or finding it. As i made the name of the shared printer EPSONStylusCX5500 but could not acess the printer name one to change it. The url link still shows the 20%. If someone could please take the time to explain on how to do it, then maybe just maybe, i would be able to print wirelessly. Any other ideas or even cheap printers that would work without a problem as i would simply go out and buy one instead. Thanks.

When you say.....
I cannot get it to work with AirPort Utility....
What does not work? Can you open up AirPort Utility and take us through the steps? What happens after each step?

Similar Messages

Time Capsule Connectivity Problem with Airport Utility and Mavericks

I have a Time Capsule from 2011 which worked perfectly with my IMac and Airport Utility 5.6.1 but since the upgrade to Mavericks, I cannot get it to work with Airport Utility. Any help much appreciated. Thanks.

When you say.....
I cannot get it to work with AirPort Utility....
What does not work? Can you open up AirPort Utility and take us through the steps? What happens after each step?

Timecapsule and iMac Early 2008 - Problems with Airport Utility

I have bought a new iMac and a TimeCapsule. With *Leopard 10.5.5* i have some problems to change the configuration. The Assistant will not work. The changed settings will not send to theTime Capsule (Ethernet or and Wireless). The airport signal is _very low_ under OSX (-60 — -64 dB). When I use airport with Windows XP on Bootcamp partition it will work fine. No problems with changing settings and the signal is -1 db.
Who has the same problems or can help me!

Do the black bars drop also at these times?
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712

Setup problems with airport extreme and cable.

I am trying to install a new airportextreme 802.11n with cable (comcast) using a Motorola SURFboard eXtreme. The airport extreme keeps blinking amber. Any suggestions?

Should I connect the modem to the AEBS before I power it up?
Yes, all devices that normally are interconnected by Ethernet, should be connected during the power recycle.
If it continues to flash amber, should I still go through the set up with Airport Utility? If so, manual or let it guide me?
Yes. The following Apple Support article describes the flashing amber status light in more detail.
By default, your AEBS will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN. You would then use the AirPort Utility to make any required configuration changes. The Utility has two basic modes: 1) Assist-me (aka Automatic) and 2) Manual Setup. The latter is used to fine-tune any settings. The assisted mode, should take you through the steps to get the AEBS up and running properly for most common configurations.
Please feel free to post back if you have any questions on setting your AEBS up.

Any problem with Airport Utility 5.3.2 and an AirDisk

Morning.
Can I harmlessly update onto Airport Utility 5.3.2 without getting troubles using an USB hard disk connntected to the Airport Extreme base station? 5.3.1 has fixed a bug that has caused reiterative disconnects to the AirDisk occurring with 5.3.0.
And I really to not want to get these troubles back in 5.3.2.
Are my fears baseless?
TIA and kind regards, Friedrich

Airport Utility 5.3.2 is quite harmless. More people having problem with OS X 10.5.3 update, which is making the AirDisk very slow and unresponsive. I end up re-formating the USB hard disk to solve the problem.

HP Color Laserjet 3600 Printing Problems with Airport Extreme & JetDirect

I have a HP Laserjet 3600n connected via ethernet cable to our Airport Extreme base station using the built-in JetDirect functionality of the printer. Prior to installing Snow Leopard we had no problems and every computer on the home network could see and print with full functionality on the printer.
After installing Snow Leopard, it took a while but I got the printer working again with the same setup. Then we had a power outage and the printer was no longer visible on the network or in the airport settings. Again it took a while but I once again got it to work. But now it seems like it keeps falling off the network and the printer itself either shows an IP address of 0.0.0.0 or another random one. The IP address should be generated by DHCP by the airport.
I don't know if this is a problem with Snow Leopard, the airport extreme, or the printer. The way I got it to work the last couple times no longer fixes the problem. Someone please help.
Message was edited by: balistikboy

I don't know if this is related, but...
My MacBook Pro (Airport) has always been dicey connecting to an HP LaserJet 4000 on my wired LAN. Before Snow Leopard, I used AppleTalk rather than IP printing because it just worked.
But Snow Leopard doesn't support AppleTalk any more, so I reinstalled the printer to connect via JetDirect (which supposedly provides more features). When it works, it works fine. But very often I get a message that it can't connect to the printer. The only thing I've found that fixes the problem is power-cycling the printer, which somehow enables queued jobs to print. Needless to say, this gets old.
Is there some trick I'm missing?

Printing problem with Airport printer

Hi,
I am having problems getting my daughter's G4 Macbook to print with Airport Extreme. The history is:
1. Set up my iMac, Airport Extreme, all well, both G4 and iMac fine over wireless.
2. Added HP Photosmart 8150 to Airport. Worked fine for iMac
3. Added it to Macbook, no go
4. Discovered that I had not actually added it to Macbook. At some point in the past, to allow printing for my daughter we had done a direct USB connection for her, and it was that we were trying to print to. But, it was there via Bonjour as a third printer when I looked.
5. Tested it from the MacBook. Graphic fine, but no text. However, v. pushed for time so no further testing.
6. Daughter tested, no good
7. Looked at all 3 printers on Macbook. 2 x USB (1 8150 plus one other from her University), plus the Bonjour 8150.
8. Decided that installing the same printer twice might be a problem. So deleted all three.
9. Now I can't install. When I go to add a printer the Macbook can't see any. Have downloaded drivers, but to no avail. Have tried as many combinations as I can in drop downs.
Basic Airport connectivity for the G4 is fine - internet functions no problems, no dropped connection etc.
Any thoughts? I am a Mac newcomer, ex PCs, pretty techno-literate.
p.s. Have reset print queues etc

Airport Extreme unit failed - replacement cured all problems

Problems with AirPort Extreme and connecting to personal ftp

Hi all
I seem to be having a problem with connecting to my personal server outside of my network. When I connect using a static IP within my network(192.168.1.x) I can connect fine using my Mac and PC so I've ruled out improper server settings. I've mapped a port (21) to the same static IP as my server, but I cannot connect. I am prompted with "An FTP Connection to "xxx.xxx.xxx.xxx" could not be opened because the FTP server dropped the connection" I think I've toggled every option in the Airport Utility but nothing seems to work. Has anybody been successful in making this work?
Thanks for any help offered

OK, thanks for the info, which really helps.
Your AirPort Extreme is in Bridge Mode, so the IP addresses that your devices need are being assigned by the Cradelpoint router, not the AirPort Extreme.
Either the Cradlepoint router is not allowing more than 3 devices to connect, or it is your service provider that is limiting the number of devices that can connect....probably because of very limited bandwidth.
I'm not sure whether you want to try to contact support at Cradlepoint or your service provider to try to find out who is actually responsible for the maximum number of connections allowed, since they will likely each blame the other for the problem.
The workaround...if you want to try it, since it bends networking rules a bit....is to configure the AirPort Extreme as a router, not a bridge.
The upside to this is that all of your devices will be able to connect and get a valid IP address.
One downside is that this will introduce what is known as a Double NAT error on the network, but that is rarely serious on a home network, and Apple does provide you with the option to "ignore" the error, so you get a nice green light on the AirPorts.
Another downside may be....depending on the bandwidth that your service provides....that your connection is really slow....as in dial up speed slow....when you have a number of devices all connected to the network simultaneously, since they will all share the available bandwidth is provided.
I never had any problems in the past with wireless connections when I configured the AirPort as the router. But I also was very careful to avoid downloading large files using the Cradlepoint connection since the bandwidth was quite limited.
Not sure how you want to proceed.
We can tell you how to configure the AirPort as the router in this type of setup if you will let us know what operating system you used to configure the AirPorts, but we cannot guarantee that things will work for you if you try it.

Printing Problems with Airport

I have an Airport Extreme with an HP Deskjet printer hooked into the USB. Printing from laptops was no problem at one time. One day, for no reason I'm aware of, it started printing only parts of pages and then generating an error. I can print from Macs and PCs with no problem when connected directly to the printer. I tried resetting the Airport to factory specs and reinstalling the drivers using Bonjour Printing Wizard on PCs, but there was no change. This has been going on for a long time, so all the obvious stuff has already been tried (checked the cables, cycled the power, etc.) Is there anything else I can try? Thanks.

Attached to the airport USB port I have
an unpowered hub with both a 500G disc and an HP deskjet 940c printer.
Why is that? power power power try it see what happens.

Problem with Airport Express and HP PSC 1410

Please I really need help. I just bought a HP PSC 1410 (all in one) and I connected on Airport Express and I can't print trought it. I tried to connect it by USB and it work perfectly. When you want to had the printer in printer utility you can find the right driver for the printer. Rendez-vous can find it but you can not install it...
I tried many different way but it never worked.
please help me ???

I suggest you return the PSC1410 for refund, or for credit towards the purchase of another printer. This printer will not work when connected via an Airport Express. When you purchase your next printer, chose one found on the unofficial compatibility list at http://www.efelix.co.uk/tech/1013.html
In general, all-in-one printers are poor choices for connecting via an Airport Express. Even if you do get them to work, you can only make use of their printing function.

Problems with airport extreme and windows vista

Hi, I have windows vista and I'm having problems conecting it to air port extreme. The only way I can make airport extreme work is to disconect and reconect the powercord and then my computer reconizes it.
Any sugestions would be helpful.

I just got off the HP "chat" technical assistance about my HP DV6500z doing this same thing. At least for my model there is an October BIOS update. She had me re-install the Broadcom drivers and run the BIOS update. Now the whole computer runs faster in addition to connecting wirelessly! Not only that, I can use the "closed" network feature through the Airport Utility to hide my network as I did in the past and the PC finds it! I guess through all of the very testy notes on HP's discussion board they finally came through (well, at least on this model). My model has the AMD processor so if yours is Intel it may not be the same. I recommend going to their TA chat line or type in your model on their Software & Driver page to see if there is a recent revision on your models BIOS. The one I downloaded was dated 10-2007.

Big problem with Airport Extreme and Vivax Provider in Brazil

Hello guys.
I live in Brazil and I bought my Airport Extreme in a recent trip to USA.
For some years I was a client of Telefonica and had an ADSL link, I had a D'Link G604T to do both the modem and router operation in the same box. I was happy with my connection of 1Mbps.
In a recent promotion of Vivax I switched to a cable connection to have both TV and Internet at the same operator, my link now has 3Mbps.
With this pack I also received free one RCA cable modem model DCM425B, it was installed fine in one computer only. Everything was fine my connection was faster the old one.
So I went to install the Airport Extreme to make things even better.
After I installed I went to see the web status of my modem, all parts were looking fine, but the modem could not see the computer. Bad sign.
I talked to Vivax support people and apparently it was a problem with their network setup and they manage to make it right. My model now sees my computer.
After that problem was solved I could not make AE to work with the modem, it had the green light and the setup looked fine, but I could not open any site. I tried to turn off my modem and AE, waited some minutes and turned on first my modem and after it was up I turned on AE. All lights looked fine but again no connection to any site.
I called again the Vivax support center and they tried to help me but the don't know AE and they could not help me with all the details but said there was 2 10.x.x.x coming from my side. So I tried to use in bridge mode. I also selected the 192.x.x.x range instead of 10.x.x.x as default.
After many setups and turn off and on again my connection is working but I have a big problem with wireless. If I turn it on I loose my connection, it seems that AE sends 2 equal ethernet address to Vivax and their network don't like it cutting me off.
So my connection setup is like this:
RCA Cable modem model DCM425B at 3Mbps using a 200.x.x.x ip
Airport Extreme connected to a Mac and a Windows PC by wire using the 192.x.x.x range ip
Wireless is off
Bridge mode is on
This the only way I could make it work.

After a firmware update it worked fine.

Problem with Disk Utility and with ITunes and with Classic

Greetings. I have had problems with ITunes recently; when I try to open it, it gives me the error message: "The ITunes Music Library file is locked, on a locked disk, or you do not have write permission for this file."
When I looked at the ITunes discussion section, people had two ideas for other people who had the same problem:
(1) Make sure that the library of music files is write-enabled (which it is) and not locked (it isn't) and
(2) Go to Disk Utility and repair the disk.
Since (1) is not a problem, I am trying (2). However, when I open Disk Utility, it just stays on the window, stating "Gathering disk information..." and proceeds no further.
Perhaps related to these problems, when I try to start up Classic, the window opens, but it gets stuck at the very beginning (stating "Classic starting up using System Folder ...") and proceeds no further.
Can anyone help me with these multiple problems? Thanks in advance.

amandel
The problems you report are different than those relating to the iTunes receipts/DU conflict. Trashing those receipts as suggested is necessary to get DU to repair permissions, but, as I understand it, you couldn't get DU to recognise your drives. And I've seen no posts relating to iTunes 6 and Classic.
I've had the problem you describe before (at least vis-a-vis DU). In principle DU's "Repair Disk" function would fix it, but of course if the disk's don't mount in DU then you can't fix them:)
Therefore fsck is a good solution, or trying DU from the Installer Disk (don't start to install, just let the first installer window appear, go to the menu and choose "Open Disk Utility") and repairing. Then reboot and repair permissions, preferably with DU running from your hard drive.
Maybe you're more of a "don't touch what's still running" kind of person, but it sounds to me like the systems a bit wobbly and needs some tender loving care. You could try a clean up using a program like OnyX as well - it won't do any harm.
Robert
G4 PB Mac OS X (10.3.9)

Problems with Airport Extreme and OS 7.6.4

Last week, we updated three devices (Time Capsule, Airport Express and Airport Extreme) to OS 7.6.4. Time Capsule and Airport Express seems to work well but the Airport Extreme didnt! Users of the AiEx told me about bad ping statistisc after wlan login. The connectivity changes in a curious way. one second, 0 % loss and one second after the connectivity changes to more than 50% loss, even the users are sitting in te same room, the AiEx does ???
We used a 2 GHz and also an 5 GHz Wlan-Network. Additional to the problem of connectivity, somtime the 5GHz-Network ist for seconds not visible!!
Now i restored the old 7.6.3 and it works well like before. One additional triel results in the same problem, even i resettet the station two times.
What to do? for the next time, our Airport Extreme got the old OS 7.6.3.
greesting
A.

If memnongr's advice doesn't work, you can revert to an old version of the firmware by using AirPort Utility 5.6.
http://macintoshdesktop.blogspot.co.uk/2012/12/airport-utility-56-and-mountain-l ion.html
Go to Base Station>Upload Firmware on the menu bar, and it will allow you to revert to an earlier version.

Problem with Airport extreme and Time machine

I recently purchased a 320gig external hard drive for Time machine. I connected it to my Airport extreme but it is not being recognized for some unknown reason. If I directly connect it to my iMac it works perfectly. I've updated with the latest firmware and it should work via USB with Airport extreme. Any suggestions why it is not working?

angelop wrote:
I have used the following for about two years.
-MBP, Airport Extreme, External HD (1TB) for my time machine.
You probably know, that's "iffy" and +*not supported by Apple.+* See the Using Time Machine with a USB drive connected to an Airport Extreme *User Tip,* also at the top of this forum.
To get around this issue, I have switched off the Time Machine, and am only turning on once a week or so, to grab any changes or additions I've made. I've been doing this for about 6 months now with no problems.
Now whenever I do this, (It should only be backing up an album or two from iTunes,) it tries to back up my whole system again. EVERY TIME. It did not do this before.
If you go too long between backups, Time Machine will do a new, full backup. And once it decides to do that, it will keep trying until it succeeds. There are some other possibilities as well. See #D2 in the Using Time Machine with a USB drive connected to an Airport Extreme *User Tip,* also at the top of the +Time Machine+ forum.
If none of those seem to explain it, see #A1 there; download the TM Buddy widget, copy and post the messages here.
Why are you only backing-up once a week? Time Machine was designed to back up changes hourly, as long as your Mac is awake and the TC is in range. It will protect you best that way, and unless there's a problem, those backups will usually be very quick.
But if you're only going to back up once a week or so, then Time Machine is not the best app for you. See Kappy's post on Basic Backup, complete with links to the web sites of each product.

Printer problem with Airport Utility and Epson CX5500

Similar Messages

Maybe you are looking for