Printer reduces size of text taken from internet; printer expands margins Microsoft Word 2007

1) HP Officejet J6480 All-in-one
2) Windows 7 64-bit
No error message, no changes to system.
Recently, and I'm not sure why, my printer began shrinking the text which it prints from the internet. It does not have this problem printing a pdf file or from Microsoft Word or the like. I'm not sure if this only occurs when i print selected text as opposed to printing what the screen sees. The shrunk text appears to be approximately 5.25 by 7 inches. If I print double sided, the problem still persists. Please let me know what I can do; I have gone through the printer options and verified that I had selected letter sized paper to print on.
In addition, one smaller issue; I frequently print from Microsoft Word in which I always set my paper margins to 1" all around the paper. On the top margin only, the printer expands it to 1.25 inches and compresses the entire text. (I have held up printed papers to my computer screen to be sure). All of the other margins are correctly formatted. Thank you for your assistance. I use Microsoft Word 2007

hi there,
could you provide the community with a little more information to help narrow troubleshooting? What browser is this under?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

HP 7520 only prints half a page of A4 in microsoft word 2007

Hi,
Using a new HP7520 all in one , it will not print a full sheet of text in
microsoft word 2007 . In the print option area of word allows me to
set different paper sizes and thats fine . but the default option is
set to No Scaling . If I change this to A4 sheet size the printer will print
the full width as required . Is this the printer setting or Word 2007, or
does this process of changing the setting in word have to be done each time
I need to print an A4 sheet of text .
In other words is it a software problem or a setting on the printer I'm missing
somewhere .
Regards chiplyn

Hi @chiplyn , welcome to the forums
I read about the printing issue you're having with Microsoft Word 2007. I would suggest checking the printer settings to ensure they are all correct, and if so, check the settings in MS Word. I would also suggest trying to print a document from another program on your computer, just to see if you have the same issue when printing from other programs besides MS Word.
Changing Print Settings in Windows 7
Changing Print Settings in Mac OS X
Please let me know your findings and we can go from there! Also let me know which OS you are running.
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Thank you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Cannot Print anything in Microsoft word 2007 program.

I have an HP Desktop 1000 j110a printer. My computer is lap top windows 7. As of today I'm unable to print
anything from my microsoft word 2007. I can ,however, print from ALL other programs on my computer with
great success. This has never happened before, and I've been printing successfully in my microsoft word for
almost a year. There has been no changes made to our system before this issue occurred. I feel this is something
simple to correct, but I cannot find the problem. Please help me. Thank you for your time in this matter.
mctle5

Hi mctle5,
The issue appears to be specifically from Microsoft Word, as you are able to print from all other programs without issue. The first step to take would be to try and repair Microsoft Word. I have included the steps on how to do this.
1. Click Start
2. Click Control Panel
3. Click on Programs and Features
4. Right click on Microsoft word
5. Click on Repair
Try printing from Microsoft Word. If you are still having problems after this. The next step would be to delete the Normal.Dot template for Word. I have included the document 'TECH TIP: Fixing your Normal.dot'.
Please let me know if you are able to print from Word after this.
Thank you.
I worked on behalf of HP

Can no longer print reduced size pagess exactly where I want them on a sheet.

Using Firefox 18.0 on XP Pro SP3 (up-to-date as far as I know)
This problem began suddenly on or about 01/12/2013.
There may have been some auto updates. (Looking at dates on Program Files directories, I see Mozilla Firefox was changed 1/11/2013 at 0901, so this may be a new problem with 18.0.)
I for a couple years, I have been printing Sudoku puzzles at 70% or 80% reduction, setting margins in Page Setup, so that I can place the puzzle precisely where there is available white space on used paper of various sizes and in landscape or portrait orientation. Occasionally the result was not what I expected, but it always turned out that I had not set Page Setup parameters correctly, and easily resolved the problem. No longer.
I have found a trick to get Firefox to recognize and remember a selected or custom page size (such as Legal) from session to session which I make use of and may possibly be relevant.

Wow! At least it's not just me!
I've been trying to do various tests, and now my results are a bit different:
Going off Candace's notes:
1) Doesn't work for me. This is what I used to do and want to do again: create a PDF from any application by clicking Print (eg, the Print link on web page) or pressing command-P. No file is created now.
2) I didn't even know this option existed. It worked for me, but I don't want to print my documents there. I want to be prompted for a name and folder of my choosing in the dialog box.
3) Oddly, this morning after reading Candace's response, I now only get prompted with one dialog box, not two. Again, I don't want to do this. I want it to work as before where after invoking Print I would be offered a dialog box asking me what to name the file and in which folder to create it.
Thanks, Candace! I appreciate your post!
Keith

Printing a document from firefox web page or Microsoft Word doc ument used to work just fine. All of a sudden I was unable to print a Word document. I can still print a web page. Any suggestions?

I have a document from Microsoft Word that will not print. It's as if the printer is not connected when I attempt with the Word document. I have gone in and deleted any pending documents in Microsoft Word. I have restarted computer, as well as the printer. The printer does not seem to be connecting or responding to the Word program (cannot find spooler) Any suggestions?

I have a problem similar to those posted here, with one difference. With my printers newly installed, regardless of which one is selected as the default, when I try to print from Adobe Reader I receive the error message we're talking about : "Before you can perform a print related task...."
Here's the fun part.
If I click OK on the message, ALL MY PRINTERS GET DELETED and, I get the windows message that "Spooler subsystem app has encountered a problem and needs to close"! If instead of clicking OK I switch to Task Manager and end Adobe, I'm fine and can print from other programs.
I can "reset" the problem by deleting the files in C:\Windows\System32\Spool\Printers and C:\Windows\System32\Spool\Drivers\w32x86, restarting the machine, and deleting then reinstalling the printers (which show up again after the restart).
BUT, if I try to print from Adobe Reader again, I get the same cycle of problems.
I am running Windows Vista and Adobe Reader 8.1

I need to attach a printer command (PCL) to all jobs from a print queue

We're running NW5.1 SP1a, and I want to send a PCL command to the
printer before all print jobs come from a certain queue. The purpose of
this is so that the DOS-based program that prints to LPT3 will print
from tray 2 of our networked laser printer. I have the PCL command I
need, and if I put it at the beginning of a doucment and then print it
from the DOS program, it will come from the correct tray.
BTW, this program is run from machines running DOS 6.22, Windows 98,
and XP. Some of the DOS boxes do a network boot from floppy, so doing
something with printer drivers on each machine is not an option. Since
they all capture the same print queues, all it would take is to be able
to send the PCL command to the printer with every job. Surely this is
possible?
Thanks!

Thank you for your help. I finally figured out what the problem was.
None of the printer definitions were visible to me when creating print
job configurations. I finally figured out what you do to import them.
Now I can attach them to my print job configuration. Yay!
I must have had some problem with the search queries I was using,
because I never could find out how to create print device definitions.
I have a couple of books here, but all they say is useless stuff like
"Print device definitions are created using the Administrator Console."
Thanks to the page of the documentation you linked to (and searching
from that section of the documentation and then following the
resulting links), I found out exactly what to do with the Administrator
Console to create/define print configurations. Now I can create a
complete print job. Yee-haw!
BTW, I have no problem RTFM-ing as long as I have the right FM to R.
Thanks again for pointing me in the right direction!
James
P.S--For what it's worth, although initially a bit counterintuitive for
someone whose primary background is Microsoft-based, the more I delve
into Netware, the better I like it. It makes the MS methodology seem
like a bunch of ugly hacks held together with the software equivalents
of bailing wire and duct tape.

Print jobs won't automatically drop from the print queue after printing

I just bought an Envy 7640. When printing multiple documents, the first print job hangs in the queue after it prints, which prevents subsequent jobs from printing. The first job continues to show a status of Printing after it prints the job. I have to manually go into the queue and cancel the finished job before the next job in the queue will print. Having to clear the queue manually each time a print job finishes is not an acceptable fix to the problem. How can I get the printer to automatically delete the print job after it prints like it's supposed to do?

Thank you for your reply. The steps that you sent are for print jobs that you cannot delete from the queue. I also found those instructions earlier, however, it doesn't apply to the problem I'm having with my printer. I don't have a problem deleting print jobs from the queue. As my previous post stated, when I print multiple documents, the first document prints but it stays in the queue with a status of Printing. Because it stays in the queue with the Printing status, it prevents the second and subsequent documents from printing. My problem is that I have to go to the queue after every single job prints and delete it from the queue to allow the next document to print. It's ridiculous to have to delete every job from the queue after it prints. The printer should automatically delete the job after it prints it, and then print the next job in the queue. How can I make the printer delete a job automatically after it prints it?? Can you please give me a resolution to this problem? Thank you.

EPrint job printed fine but cannot remove it from my print que

I used my computer @ work to print a document to eprint. It printed just fine, but I cannot remove the print job in the que in my laptop (not the computer I used @ work). Because I cannot remove it, I cannot print anything. Help

Hi Msdelta,
I have a couple of questions for you. When you sent the document to the printer did you use the ePrint email address? When you refer to que are you logging into your ePrint account and checking your ePrint history? Are you speaking of your print que on your computer?

OLE2 from Forms 10g to Microsoft Word 2007 Mail Merge

We have an Oracle Form that allows the user to print off information on the Form to a Microsoft Word document via OLE2 and mail merging; Forms version is 10.1.2.0.2 as it the version of OAS (from Linux Redhat AS4). This currently works fine if the user has Microsoft Word 2000, but since a recent upgrade to Office 2003 and now in some cases 2007, this functionality doesn't work. The JInitiator Console displays the following error messages:
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\jovinc
Proxy Configuration: Manual Configuration
Proxy: stpproxy:80
Proxy Overrides: 172.27*,172.28*,10*,10.*,intranet.fnfis.com*,ljtcapd05.fnfis.com,ukbiprodlx01,ukbiprodlx01.certegy.com,ukbiprodlx02*,ukbiprodlx02.certegy.com*
JAR cache enabled
Location: C:\Documents and Settings\jovinc\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://ukbiprodlx01.certegy.com:7778/forms/java/frmall_jinit.jar from JAR cache
Loading http://ukbiprodlx01.certegy.com:7778/forms/java/frmrwinteg.jar from JAR cache
Loading http://ukbiprodlx01.certegy.com:7778/forms/java/frmwebutil.jar from JAR cache
Loading http://ukbiprodlx01.certegy.com:7778/forms/java/jacob.jar from JAR cache
Loading http://ukbiprodlx01.certegy.com:7778/forms/CTYCommonLive/CommonImages.jar from JAR cache
Loading http://ukbiprodlx01.certegy.com:7778/forms/CTYLogonLive/LogonImages.jar from JAR cache
Loading http://ukbiprodlx01.certegy.com:7778/forms/CTYXplorerLive/XplorerImages.jar from JAR cache
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.0
2009-Aug-19 11:30:43.785 ERROR>WUO-714 [OleFunctions.setExceptionValues()] Unable to get the last OLE Error details; Exception
null
2009-Aug-19 11:30:43.785 ERROR>WUO-707 [OleFunctions.invoke_obj()] Unable to invoke Method: TypeText; Exception
com.jacob.com.ComFailException: A COM exception has been encountered:
At Invoke of: TypeText
Description: Type mismatch.
2009-Aug-19 11:30:44.848 ERROR>WUO-707 [OleFunctions.invoke_obj()] Unable to invoke Method: Execute; Exception
com.jacob.com.ComFailException: Invoke of: Execute
Source: Microsoft Word
Description: This method or property is not available because the document is not a mail merge main document.
The below code is used within the Form when they invoke the 'Print' function:
PROCEDURE PR_print_invoice
IS
l_t_application CLIENT_OLE2.OBJ_TYPE;
l_t_documents CLIENT_OLE2.OBJ_TYPE;
l_t_source_doc CLIENT_OLE2.OBJ_TYPE;
l_t_letter_doc CLIENT_OLE2.OBJ_TYPE;
l_t_merge_doc CLIENT_OLE2.OBJ_TYPE;
l_t_mail_merge CLIENT_OLE2.OBJ_TYPE;
l_t_selection CLIENT_OLE2.OBJ_TYPE;
l_t_args CLIENT_OLE2.LIST_TYPE;
l_t_args_move_right CLIENT_OLE2.LIST_TYPE;
l_v_sourcefile VARCHAR2(2000);
l_v_letter VARCHAR2(2000);
l_v_mergefile VARCHAR2(2000);
l_v_destination_directory VARCHAR2(2000);
l_v_source_directory VARCHAR2(2000);
l_n_ok NUMBER;
l_n_tax NUMBER;
l_n_total_value NUMBER;
l_n_total_tax NUMBER;
l_v_country VARCHAR2(3);
l_t_bca_client_address_line1 bill_client_address.bca_client_address_line1%TYPE;
l_t_bca_client_address_line2 bill_client_address.bca_client_address_line2%TYPE;
l_t_bca_client_address_line3 bill_client_address.bca_client_address_line3%TYPE;
l_t_bca_client_address_line4 bill_client_address.bca_client_address_line4%TYPE;
l_t_bca_client_address_line5 bill_client_address.bca_client_address_line5%TYPE;
l_t_bca_client_address_line6 bill_client_address.bca_client_address_line6%TYPE;
l_t_bcl_client_name bill_client.bcl_client_name%TYPE;
l_t_bcl_client_id bill_client.bcl_client_id%TYPE;
l_t_trt_rate tax_rate.trt_rate%TYPE;
l_t_rli_description_1 reference_list.rli_description_1%TYPE;
l_n_item_count NUMBER := 0;
l_b_debug BOOLEAN;
l_b_ok BOOLEAN;
l_n_bookmark NUMBER := 0;
l_n_counter PLS_INTEGER;
CURSOR l_cur_client( p_ti_bcl_seq_num IN bill_client.bcl_seq_num%TYPE )
IS
SELECT bcl_client_id
, bcl_client_name
FROM bill_client
WHERE bcl_seq_num = p_ti_bcl_seq_num
CURSOR l_cur_client_address( p_ti_bcl_seq_num IN bill_client.bcl_seq_num%TYPE )
IS
SELECT bca_client_address_line1
, bca_client_address_line2
, bca_client_address_line3
, bca_client_address_line4
, bca_client_address_line5
, bca_client_address_line6
FROM bill_client_address bca
, role
WHERE bca_bcl_seq_num = p_ti_bcl_seq_num
AND rol_ref_type = 'INVPOINT'
AND rol_bcl_seq_num = p_ti_bcl_seq_num
AND rol_bca_seq_num = bca_seq_num
CURSOR l_cur_items( p_ti_mih_seq_num IN manual_invoice_header.mih_seq_num%TYPE )
IS
SELECT mil_tco_seq_num
, mil_value
, mil_description
, mil_quantity
, rownum
FROM manual_invoice_line mil
WHERE mil_mih_seq_num = p_ti_mih_seq_num
CURSOR l_cur_count_items( p_ti_mih_seq_num IN manual_invoice_header.mih_seq_num%TYPE )
IS
SELECT count(*)
FROM manual_invoice_line
WHERE mil_mih_seq_num = p_ti_mih_seq_num
CURSOR l_cur_tax_rate( p_ti_tco_seq_num IN tax_rate.trt_tco_seq_num%TYPE
, p_ti_mih_invoice_date manual_invoice_header.mih_invoice_date%TYPE )
IS
SELECT trt_rate
FROM tax_rate
WHERE trt_tco_seq_num = p_ti_tco_seq_num
AND p_ti_mih_invoice_date BETWEEN trt_effective_date AND NVL( trt_effective_end_date, p_ti_mih_invoice_date )
CURSOR l_cur_ref_list( p_ti_rli_code reference_list.rli_code%TYPE )
IS
SELECT rli_description_1
FROM reference_list
WHERE rli_rty_code = 'INTYP'
AND rli_bcy_seq_num = NVL( :GLOBAL.bcy_seq_num, 1 )
AND rli_code = p_ti_rli_code
CURSOR l_cur_country( p_ti_bcy_seq_num bill_country.bcy_seq_num%TYPE )
IS
SELECT bcy_short_name
FROM bill_country
WHERE bcy_seq_num = p_ti_bcy_seq_num
PROCEDURE PR_Insert_Cell( p_vi_text IN VARCHAR2 )
IS
l_n_bookmark NUMBER := 0;
BEGIN
l_n_bookmark := 1;
l_t_args := CLIENT_OLE2.CREATE_ARGLIST;
CLIENT_OLE2.ADD_ARG( l_t_args, p_vi_text );
CLIENT_OLE2.INVOKE( l_t_selection, 'TypeText', l_t_args);
CLIENT_OLE2.DESTROY_ARGLIST( l_t_args );
EXCEPTION
WHEN FORM_TRIGGER_FAILURE
THEN
RAISE;
WHEN OTHERS
THEN
PA_lib_msg.PR_others_exception( 'PA_hci_misc.PR_print_invoice.PR_insert_cell', l_n_bookmark );
END;
BEGIN
l_n_bookmark := 1;
SYNCHRONIZE;
l_n_bookmark := 2;
OPEN l_cur_country( :GLOBAL.bcy_seq_num );
FETCH l_cur_country INTO l_v_country;
CLOSE l_cur_country;
-- Determine invoice names and locations and fetch them from the server
l_n_bookmark := 3;
l_v_sourcefile := pa_lib_security.fn_fetch_environment( 'ManualInvoiceSourceFile' );
l_v_letter := pa_lib_security.fn_fetch_environment( l_v_country || 'ManualInvoiceMergeFile' );
l_v_source_directory := pa_lib_security.fn_fetch_environment( 'SourceManualInvoiceDirectory' );
l_v_destination_directory := pa_lib_security.fn_fetch_environment( 'DestinationManualInvoiceDir' );
l_b_debug := ( pa_lib_security.fn_fetch_environment( 'ManualInvoiceDebug' ) = 'Y' );
l_b_ok := webutil_file_transfer.as_to_client( l_v_destination_directory||l_v_sourcefile, l_v_source_directory||l_v_sourcefile );
l_b_ok := webutil_file_transfer.as_to_client( l_v_destination_directory||l_v_letter, l_v_source_directory||l_v_letter );
l_n_bookmark := 4;
IF ( :SYSTEM.FORM_STATUS = 'CHANGED' )
THEN
l_n_bookmark := 5;
DO_KEY('commit_form');
END IF;
l_n_bookmark := 6;
OPEN l_cur_count_items( :blk_manual_inv_header.mih_seq_num );
FETCH l_cur_count_items INTO l_n_item_count;
CLOSE l_cur_count_items;
IF ( l_n_item_count = 0 )
THEN
pa_lib_msg.pr_message_alert( 'STB', -119 );
RETURN;
END IF;
l_n_bookmark := 7;
SET_APPLICATION_PROPERTY( CURSOR_STYLE, 'BUSY' );
-- Start Word
l_n_bookmark := 8;
l_t_application := CLIENT_OLE2.CREATE_OBJ( 'Word.Application' );
l_t_documents := CLIENT_OLE2.GET_OBJ_PROPERTY( l_t_application, 'Documents' );
IF ( l_b_debug )
THEN
CLIENT_OLE2.SET_PROPERTY( l_t_application, 'Visible', 1 );
END IF;
-- Open source file
l_n_bookmark := 9;
l_t_args := CLIENT_OLE2.CREATE_ARGLIST;
CLIENT_OLE2.ADD_ARG( l_t_args, l_v_destination_directory||l_v_sourcefile );
l_t_source_doc := CLIENT_OLE2.INVOKE_OBJ( l_t_documents, 'Open', l_t_args );
CLIENT_OLE2.DESTROY_ARGLIST( l_t_args );
-- Populate source file with invoice items
l_n_bookmark := 10;
OPEN l_cur_client( :parameter.p_bcl_seq_num );
FETCH l_cur_client INTO l_t_bcl_client_id, l_t_bcl_client_name;
IF ( l_cur_client%NOTFOUND )
THEN
CLOSE l_cur_client;
pa_lib_msg.pr_message_alert( 'STB', -121 );
END IF;
CLOSE l_cur_client;
l_n_bookmark := 11;
OPEN l_cur_client_address( :parameter.p_bcl_seq_num );
FETCH l_cur_client_address INTO l_t_bca_client_address_line1
, l_t_bca_client_address_line2
, l_t_bca_client_address_line3
, l_t_bca_client_address_line4
, l_t_bca_client_address_line5
, l_t_bca_client_address_line6;
IF ( l_cur_client_address%NOTFOUND )
THEN
CLOSE l_cur_client_address;
pa_lib_msg.pr_message_alert( 'STB', -122 );
END IF;
CLOSE l_cur_client_address;
l_n_bookmark := 12;
OPEN l_cur_ref_list( :blk_manual_inv_header.mih_invoice_type );
FETCH l_cur_ref_list INTO l_t_rli_description_1;
IF ( l_cur_ref_list%NOTFOUND )
THEN
CLOSE l_cur_ref_list;
pa_lib_msg.pr_message_alert( 'STB', -123 );
END IF;
CLOSE l_cur_ref_list;
-- Move to first data column
l_n_bookmark := 13;
l_t_selection := CLIENT_OLE2.GET_OBJ_PROPERTY( l_t_application, 'Selection' );
l_t_args_move_right := CLIENT_OLE2.CREATE_ARGLIST;
CLIENT_OLE2.ADD_ARG( l_t_args_move_right, 12 );
CLIENT_OLE2.ADD_ARG( l_t_args_move_right, 1 );
CLIENT_OLE2.ADD_ARG( l_t_args_move_right, 0 );
FOR l_n_counter IN 1 .. 19
LOOP
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
END LOOP;
l_n_bookmark := 14;
l_n_total_value := 0;
l_n_total_tax := 0;
FOR l_r_items IN l_cur_items( :blk_manual_inv_header.mih_seq_num )
LOOP
l_n_bookmark := 15;
OPEN l_cur_tax_rate( l_r_items.mil_tco_seq_num, :blk_manual_inv_header.mih_invoice_date );
FETCH l_cur_tax_rate INTO l_t_trt_rate;
IF ( l_cur_tax_rate%NOTFOUND )
THEN
CLOSE l_cur_tax_rate;
pa_lib_msg.pr_message_alert( 'STB', -124 );
END IF;
CLOSE l_cur_tax_rate;
l_n_tax := ROUND( l_r_items.mil_value * ( l_t_trt_rate / 100 ), 2 );
l_n_total_tax := l_n_total_tax + l_n_tax;
l_n_total_value := l_n_total_value + l_r_items.mil_value;
END LOOP;
l_n_bookmark := 16;
FOR l_r_items IN l_cur_items( :blk_manual_inv_header.mih_seq_num )
LOOP
l_n_bookmark := 17;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
PR_insert_cell( l_r_items.mil_description );
l_n_bookmark := 18;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
PR_insert_cell( TO_CHAR( l_r_items.mil_quantity ) );
l_n_bookmark := 19;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
PR_insert_cell( TO_CHAR( l_r_items.mil_value, '99999999.90' ) );
l_n_bookmark := 20;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
OPEN l_cur_tax_rate( l_r_items.mil_tco_seq_num, :blk_manual_inv_header.mih_invoice_date );
FETCH l_cur_tax_rate INTO l_t_trt_rate;
IF ( l_cur_tax_rate%NOTFOUND )
THEN
CLOSE l_cur_tax_rate;
pa_lib_msg.pr_message_alert( 'STB', -124 );
END IF;
CLOSE l_cur_tax_rate;
PR_insert_cell( TO_CHAR( l_t_trt_rate ) || '%' );
l_n_bookmark := 21;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
l_n_tax := ROUND( l_r_items.mil_value * ( l_t_trt_rate / 100 ), 2 );
PR_insert_cell( TO_CHAR( l_n_tax, '99999999.90' ) );
l_n_bookmark := 22;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
PR_insert_cell( TO_CHAR( l_r_items.rownum ) );
l_n_bookmark := 23;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
PR_insert_cell( UPPER( l_t_rli_description_1 ) );
l_n_bookmark := 24;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
PR_insert_cell( l_t_bcl_client_name );
l_n_bookmark := 25;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
PR_insert_cell( l_t_bca_client_address_line1 );
l_n_bookmark := 26;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
PR_insert_cell( l_t_bca_client_address_line2 );
l_n_bookmark := 27;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
PR_insert_cell( l_t_bca_client_address_line3 );
l_n_bookmark := 28;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
PR_insert_cell( l_t_bca_client_address_line4 );
l_n_bookmark := 29;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
PR_insert_cell( l_t_bca_client_address_line5 );
l_n_bookmark := 30;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
PR_insert_cell( l_t_bca_client_address_line6 );
l_n_bookmark := 31;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
PR_insert_cell( TO_CHAR( :blk_manual_inv_header.mih_invoice_date, 'DD/MM/YYYY' ) );
l_n_bookmark := 32;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
PR_insert_cell( l_t_bcl_client_id );
l_n_bookmark := 33;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
IF ( :blk_manual_inv_header.mih_invoice_prefix IS NULL )
THEN
PR_insert_cell( TO_CHAR( :blk_manual_inv_header.mih_invoice_number, '0000000009' ) || '/' ||
TO_CHAR( :blk_manual_inv_header.mih_issue_number, '09') );
ELSE
IF ( NVL( LENGTH( :blk_manual_inv_header.mih_invoice_prefix), 0 ) = 1 )
THEN
PR_insert_cell( :blk_manual_inv_header.mih_invoice_prefix ||
TO_CHAR( :blk_manual_inv_header.mih_invoice_number, '000000009' ) || '/' ||
TO_CHAR( :blk_manual_inv_header.mih_issue_number, '09' ) );
ELSE
PR_insert_cell( :blk_manual_inv_header.mih_invoice_prefix ||
TO_CHAR( :blk_manual_inv_header.mih_invoice_number, '00000009' ) || '/' ||
TO_CHAR( :blk_manual_inv_header.mih_issue_number, '09' ) );
END IF;
END IF;
l_n_bookmark := 34;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
IF ( l_r_items.rownum = 1 )
THEN
PR_insert_cell( TO_CHAR( l_n_total_value, '99999999.90') );
END IF;
l_n_bookmark := 35;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
IF ( l_r_items.rownum = 1 )
THEN
PR_insert_cell( TO_CHAR( l_n_total_tax, '99999999.90' ) );
END IF;
l_n_bookmark := 36;
CLIENT_OLE2.INVOKE( l_t_selection, 'MoveRight', l_t_args_move_right );
IF ( l_r_items.rownum = 1 )
THEN
PR_insert_cell( TO_CHAR( l_n_total_value + l_n_total_tax, '99999999.90' ) );
END IF;
END LOOP;
CLIENT_OLE2.DESTROY_ARGLIST( l_t_args_move_right );
-- Open merge file
l_n_bookmark := 37;
l_t_args := CLIENT_OLE2.CREATE_ARGLIST;
CLIENT_OLE2.ADD_ARG( l_t_args, l_v_destination_directory||l_v_letter );
l_t_letter_doc := CLIENT_OLE2.INVOKE_OBJ( l_t_documents, 'Open', l_t_args );
CLIENT_OLE2.DESTROY_ARGLIST( l_t_args );
-- Do mail merge
l_n_bookmark := 38;
l_t_mail_merge := CLIENT_OLE2.GET_OBJ_PROPERTY( l_t_letter_doc, 'MailMerge');
l_t_args := CLIENT_OLE2.CREATE_ARGLIST;
CLIENT_OLE2.INVOKE( l_t_mail_merge, 'Execute', l_t_args );
CLIENT_OLE2.DESTROY_ARGLIST( l_t_args );
-- Print
l_n_bookmark := 39;
l_t_args := CLIENT_OLE2.CREATE_ARGLIST;
l_t_merge_doc := CLIENT_OLE2.GET_OBJ_PROPERTY( l_t_application, 'ActiveDocument' );
CLIENT_OLE2.ADD_ARG( l_t_args, 0 );
CLIENT_OLE2.INVOKE( l_t_merge_doc, 'PrintOut', l_t_args );
CLIENT_OLE2.DESTROY_ARGLIST( l_t_args );
-- Cleanup
l_n_bookmark := 40;
IF ( NOT( l_b_debug ) )
THEN
l_t_args := CLIENT_OLE2.CREATE_ARGLIST;
CLIENT_OLE2.ADD_ARG( l_t_args, 0 );
CLIENT_OLE2.INVOKE( l_t_documents, 'Close', l_t_args );
CLIENT_OLE2.DESTROY_ARGLIST( l_t_args );
CLIENT_OLE2.INVOKE( l_t_application, 'QUIT' );
END IF;
CLIENT_OLE2.RELEASE_OBJ( l_t_selection );
CLIENT_OLE2.RELEASE_OBJ( l_t_mail_merge );
CLIENT_OLE2.RELEASE_OBJ( l_t_source_doc );
CLIENT_OLE2.RELEASE_OBJ( l_t_letter_doc );
CLIENT_OLE2.RELEASE_OBJ( l_t_merge_doc );
CLIENT_OLE2.RELEASE_OBJ( l_t_documents );
CLIENT_OLE2.RELEASE_OBJ( l_t_application );
l_n_bookmark := 41;
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'DEFAULT');
EXCEPTION
WHEN FORM_TRIGGER_FAILURE
THEN
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'DEFAULT');
RAISE;
WHEN OTHERS
THEN
PA_lib_msg.PR_others_exception('PA_hci_misc.PR_print_invoice',l_n_bookmark);
END;
---------------------------------

Some questions:
Which version of office were you using before? 2003?
Are the data files on a network, or on your local machine? If they are on a network, can you make a copy of one of them on your local machine and try again?
Can you open the files directly in Excel? What extension do they have (.xls, or something else?) I am wondering whether access to other file types has been left blocked on your machine but is allowed on your colleague's machine.
Are you just opening the mail merge main document and seeing this message? If so, do you see the same thing if you start with a new document and try to connect to one of these data sources?
Can you confirm that the message is about Access even though you are trying to connect to an Excel file?
(Also, office 2007 has some new stuff - that let's you specify that certain folders are "trusted" . I don't think that ever affected MailMerge but it may be as well to make sure that your documents and data sources are in trusted locations).
Also worth trying to start Word in "Safe mode" - see, e.g. http://office.microsoft.com/en-gb/word-help/work-with-office-safe-modes-HP010140792.aspx
Peter Jamieson

I am unable to copy fillable fields from a pdf form into Microsoft Word or notepad....Help! thank you!

I am unable to copy fillable fields from a pdf form I created in Adobe X Pro into a Microsoft Word or Notepad document. Please help! Thank you!!

I have created a fillable form. Part of the information from that form needs to be copied and sent to another department at work. Once i complete the fillable form (e.g. select options from a drop down, enter test in test boxes that are on the form) when i copy that section, i only get the non-fillable information pasted into word or notepad, the drop down selections and fillable text do not copy.

Unable to open ".mht file" in Internet Explorer 10 and Microsoft Word running on Win7

.mht file error in internet explorer 10
"MIME-Version : 1.0 Content-Type:multipart/relates; boundar="---=N_NextPart_01CEFB@&>FA^*@A&)" This document is
a Single file Web Page, also known as a Web Archive File. If you are seeing this message, your browser or editor doesn't
support Web Archive files. Please download a browser that support Web Archive, such as Windows Internet Explorer Encoding:quoted-printable Content-Type: text/html;="windows-1252"
.mht file error in Microsoft Word
"You need to have Microsoft Outlook Express or Windows Mail installed to work Single File Web Pages. Outlook Express or Windows Mail is an optional component of Microsoft Internet explorer 4 or later."

This area is for forum issues only. You'll have better luck posting your question here:
http://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w7itprogeneral
Please do not read this sentence. Please ignore the previous sentence.

How to copy and paste a document typed in the EpicWrite (esp. a text typed in Kannada)on a Microsoft Word 2007 page?

02-03-2012
For last one week, I have been trying in vain to copy and paste a document typed in the Epic Write on a Word 2007 format, so that I can retrieve or modify it anytime without depending on the Internet connection. Whenever, I paste on a webpage, it cannot be edited and when I transfer that on a Word page, only words & figures in English appear and the rest of the text is displayed in blank square boxes.
How I can overcome this problem?

Are that pages in Unicode?
*[http://kn.wikipedia.org/wiki/%E0%B2%95%E0%B2%A8%E0%B3%8D%E0%B2%A8%E0%B2%A1]

Has anyone had a problem centering labels from microsoft word 2007 using the hp photosmart 7510? my

Has anyone had a problem with printing labels centered on HP Photosmart 7510 e-All in one? My labels are printed from Word 2007 and appear on the screen to be centered, however when I print, they are too high on the label. Also when printing an e-mail the bottom of the page where it lists your email name is cut off. Please help!!

Hi,
I'd been having this problem for probably round 30 years on many printers. I bought a labels printer few years back but I don't print labels everyday now.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Photosmart 7660 printing blank page when using Microsoft word 2007

I have a Hp photsmart 7660.It will print a Test page ok-it will print some of the text in an email.That is the heading and the end, but not the message in the middle of the email. When I write a document in Microsoft Word or Works the printer will go through the motions of printing but all I get is a blank page.
I have uninstalled and reinstalled using original disk and also tried the same using Hp software download all to no avail.
The utility diagnostic says there is no problem everything is working well,but of course it is not. Can anyone help me to resolve this problem please.

I tried this but didnt work for mr. Can you help? How did you PDFed??
It works for me in Word 2010 (or later) using Save As PDF. It did not work in Word 2007 using the Adobe Acrobat PDF printer nor using Word 2007's save as pdf utility. (The hyperlink showed up but was not active.) It did work using the Acrobat tab in Word
2007 (this requires Adobe Acrobat).
I did this by:
first creating the text box with the hyperlink in the body of the document and moving it into the footer area (but still not in the footer itself).
Then I used the Format tab of Text Box Tools and the Postion button (More Layout Options).
I gave it an absolute vertical position relative to the page.
Then I cut the text box, went into the footer, and pasted it there.
It might have worked to just create the text box in the footer itself.
I personally prefer it that the header and footer are not part of the active page when I am typing. This hyperlink is not clickable in Word without going into the header/footer view and I'm fine with that. The QAT workaround is just fine.
Charles Kenyon Madison, WI

Copying from Oracle SQL Developer to Microsoft Word doesn't retain formatting (Font,colors etc)

Copying from Oracle SQL Developer Worksheet doesn't retain formatting (font,color etc...)in Microsoft Word but copying from other programs such as
visual studio, chrome browser etc works fine. This doesn't work even after changed the setting to Keep Source formatting of Options-> Copy and Paste Settings

Hi,
I notice that you have cross posted in Answers forum and Oracle forum. Have you tried Mr. Peter's suggestion?
Then, I recommend we check the Word settings:
1. Go to: Options > Advanced > Cut, Copy and Paste
2. Make sure that Use smart cut and paste is ticked.
3. Click the Settings button next to this option
4. Make sure that Smart Style
Behavior is checked.
If the issue still exists, please upload a sample through One Drive, I want to test.
Regards,
George Zhao
TechNet Community Support

Printer reduces size of text taken from internet; printer expands margins Microsoft Word 2007

Similar Messages

Maybe you are looking for