Printing a boilerplate text at the end of each row.

Hi All
I am printing a report (a set of letters). I want to print some header in the last page of each letters. How do I do that?
The reports returns 10 letters to be printed. I want to print a header in the last page of each letter. These letters span multiple pages.
for e.g letter1 - 2 pages
letter2 - 2 pages
letter3 - 3 pages etc.
Any help is appreciated.
Rgds
ARvind

Hello ARvind,
I would think that you have a repeating frame1 that
sets Letter1, Letter2, Letter3.., so on. And another
repeating frame2 inside repeating frame1 for the
content of the letter? Place the header inside
repeating frame1 but at the bottom of repeating
frame2, this way it will be printed after the letter
content is printed. I hope i'm making sense : )
-MarilynHi
Thank You for your help. But I want to print the text in the top of the last page, for each letter. Not after each letter.
Rgds
Arvind

Similar Messages

  • Putting buttons at the end of each row of a report

    Hi
    Was wondering if anyone new of a way to put buttons on the end of each row of a report. Basically i want a button and a LOV box next to the end of each row so that the user could set the value of the LOV box click the button and that would update just that row. Obviously i want to give them the option of batch processing it as well but for now i just want them to be able to update one row at a time.
    This does not nessacary need to be with a LOV box it could also work with radio buttons to specifiy the value to update.
    If anyone knows a way of doing this or any information where i can read about it then please let me know as i would be very interested.
    Or can you make report fields eidtable so that i can just run a massage update on the using all the values in the report?
    Thank you for your time
    Daniel Stead
    Message was edited by:
    Dan Stead

    No such luck a tabluar updat form shows all the rows for that table. I only want the user to be able to update their rows in the table.
    This is bascally what i want to do.
    I have two reports that only show records that are realted to the current user that is logged in.
    The first report shows all records in the table for the current user where the supervisor (the current user) type is set to confirmed.
    The second reprot shows all the records in the table for the current user where the supervisor (the current user) type is set to requested.
    That is what i have acheived so far.
    I want to be able to make the superviosr type in the second report editable with a list of values requested, rejected and confirmed. The user can then select what he would like the type to be for the specific record in the report and then press a button that updates all the reocrds (or a button at the end of each row that updates each row). If the row is confirmed it moves to the first report, if it is still requested it stays in the second report and if it is set to rejected then it will be in neither report.
    Therefore my question is if i make the supervisor type eidtable how can i link it to the id of that row so that it updates it?
    If this is not clear please state to me which part i have not made clear.
    Thank you for your help.
    Daniel Stead

  • How to Print Sales header text at the end of last page of Main Window

    Dear All,
    I have a requirement to print Sales order header text at the end of Main of last page. I don't have footer window.When i use Bottom-End bottom.Only one line is printing.The header has 5 lines.
    Request you to provide <b>code</b>to handle this situation. Your response is highly appreciated
    Best Regards
    Praveen

    Hi,
    If u r using standard layout set RVORDER01.
    U can print that sales order header text in the following text element.
    /E SUPPLEMENT_TEXT.
    U can include ur text objects here.
    Then it gets printed.
    Regards,
    Veda Kumar

  • How do I justify text at the end of a column

    How do I justify text at the end of a column In Pages?
    Also, is there any way to sort a document (alphabetically by the first word of each paragraph) that is not in a table?

    RTPLaw writes:
    How do I justify text at
    the end of a column In
    P    a    g    e    s     ?
    Also, is there any way
    to   sort  a  document
    (alphabetically by the
    first   word   of   each
    paragraph) that is not
    in         a         table?
    No. Like Peter and Walt, I wonder why you'd want to, considering the appearance of such manipulation, illustrated above. Is this a requirement for some specific type of document?
    Regarding your second question, there's no way to do this using Pages as it comes out-of-the-box (or in the downloaded edition). But you can sort the paragraphs of a document alphabetically using WordService, freeware from Devon Technologies. The link will take you to their download page. Scroll down to the Freeware section and the download link for WordService.
    Regards,
    Barry

  • Search for the end of each text frame?

    I'd like to insert some kind of marker at the end of each of my text frames in order to preserve where the page breaks occur, even after I've exported my file. The only function in InDesign that seems to recognize pages is the text variables that can pull the first/last instance of something on a page. Other than that, I can find no way of searching for the end of a page or end of a text frame.

    myFrames = app.activeDocument.textFrames;
    myCharStyle = app.activeDocument.characterStyles.itemByName("Marker");
    for (a=0; a<myFrames.length; a++){
         if (myFrames[a].characters.length>0){
              myFrames[a].characters[-1].appliedCharacterStyle = myCharStyle;
    The above script will apply a character style called Marker to the last character of all text frames in the document (prepare a character style called Marker [case-sensitive] before you run the script, or change the name in the second line.
    I guess a character style isn't an ideal solution, though, as it might override something else.
    Perhaps a strikethrough? In which case, change the 5th line to:
    myFrames[a].characters[-1].strikeThru = true;
    Does that help?
    Ariel
    www.FreelanceBookDesign.com
    Message was edited by: Arïel to correct syntax error.

  • When I print a selected area of web page, it doesn't fit to the paper. The end of each page are cut off. Is there any solution?

    When I print a selected area of web page, it doesn't fit to the paper. The end of each page are cut off.
    I'm very sure my printer is set cirrectly.
    Can't Firefox shrink to fit when I want to print a selected area of web pages?
    This has never occurred in IE.

    File >Page Setup -- check your margins, I have set size to 85% which is probably left over from some problem. Also check your printer that it is correctly set to the size of the paper.

  • Adding a pipe character '|' at the end of each line

    How can I add a '|' at the end of each line in a text file?
    Please provide an example.
    TIA

    Using Readers and Writers are often a better choice for text: they are designed for character-based I/O, handling different character set encodings and thus more easily localizable.
    BufferedReader and PrintWriter are buffered which in many cases will increase performance.
    These classes also provide line-oriented methods, readLine() and println(), which will handle end-of-line delimiters in a platform-independant way.
    BufferedReader in = null ;
    PrintWriter out = null ;
    try {
        in = new BufferedReader(new FileReader("infile.txt")) ;
        out = new PrintWriter(new FileWriter("outfile.txt")) ;
        String line ;
        while ((line = in.readLine()) != null) {
            out.print(line) ;
            out.println('|') ;
        out.flush() ;
    } catch (FileNotFoundException e) {
        System.err.println("problem opening file for read: "+e) ;
    } catch (IOException e) {
        System.err.println("problem reading file: "+e) ;
    } finally {
        try {
            if (out != null) out.close() ;
            if (in  != null) in.close() ;
        } catch (IOException e) {
            System.err.println("problem closing files: "+e) ;
    }

  • All my song in my playlists are cutting off either in middle or at the end of each song. How do i fix this?

    all my song in my playlists are cutting off either in middle or at the end of each song. How do i fix this?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Remove the extra space at the end of each page in the report

    Hi,
    When the RDF report output is seen in notepad, it shows empty lines at the end of each page. Is it possble to avoid these empty lines and display the output without any empty lines.
    Thanks in advance.
    Divya

    In the headers and footers of table/loop nodes, use event "at page break" on condition tab. Read some documentation like [Printing Data in a Table|http://help.sap.com/saphelp_NW70EHP1core/helpdata/en/0b/e06b192d8411d5b693006094192fe3/frameset.htm]
    Regards,
    Raymond

  • Hyperlinks from my MSWord files suddenly don't work because "/FirefoxHTML\Shell\Open\Command" has somehow been added to the end of each URL.

    When I click to open the hyperlink in my Word file, the message I get in Firefox is "The requested URL /submissions.htmlFirefoxHTML\Shell\Open\Command was not found on this server." When I delete that portion of the URL, the website opens fine. What can I do to make the hyperlinks work properly?

    Thanks for the suggestion. I tried it, but it didn't work. The link information is written correctly on the MSWord page. But when I click on it and the Firefox tab opens, the page can't be found because "FirefoxHTML\Shell\Open\Command" has been added to the end of each URL. Might it help if I reset Firefox?

  • How do I receive multiple texts from the same sender, each individually?

    How do I receive multiple texts from the same sender, each individually?

    So I receive automated reminders from my job &amp; I want them to come individually. For example, one text -- time stamped 10:14 pm, then another 11:12 am, coming as separate msgs.

  • How to add a signature at the end of each post

    How do you add a signature at the end of each post (if possible)?
    ^^right now, I just have to copy and paste that

    It's possible to set up your signature on the Desktop such that it can be simply dragged into the Camera icon's "From the Web" field...
    1. Right click on an already posted pic
    2. Choose "Open Link in New Tab"
    3. From the address bar of that new tab, drag the URL's favicon (little icon) to your Desktop whereupon an "@" icon will be created
    The above only has to be done once, and then to use that image in future posts...
    1. Click the Camera icon
    2. Click "From the Web"
    3. Drag the URL's "@" icon from your Desktop to the URL field and click Insert Image
    And if you want your signature instead of a generic "@" icon, that's possible too:

  • How to add an image or static text in the header of EACH page of a cross-Tab report

    Post Author: rtutus
    CA Forum: General
    Hi, I use Crustal 11.0.
    I have a cross Tab. I display the items on the left column and the months horizontally, the items are grouped by category field. The values are the sum of quantities are displayed for each month. Like this:
                             Items         Jan       Feb       March .....................Total
    Category 1                       
                             Item11         val11     Val12      Val13                     Total values
                             Item12         val21     Val22      Val23                     Total values
                             Item13         val31     Val32      Val33                     Total values
    Category 2                       
                             Item21         val11     Val12      Val13                     Total values
                             Item22         val21     Val22      Val23                     Total values
                             Item23         val31     Val32      Val33                     Total values
    Category 3                       
                             Item31         val11     Val12      Val13                     Total values
                             Item32         val21     Val22      Val23                     Total values
                             Item33         val31     Val32      Val33                     Total values
    The problem, I want to add a page header for each page of the report.
    When Crystal reports first displays my cross-tab in the designer, CR displays the cross tab in the Report header section. I d like to add text or image for each page and not only at the begining of my Cross-Tab.
    If I just add an image or text at the top of the report designer, which is my report header, I get the image or text only on the begining of the 1st page of my report but never in the other following pages.
    If I try to work around the problem and move the cross Tab to a group section instead, and then put the Image in the group header, I get what I want, but the problem is that:
    The columns header: Jan, February....December are displayed for each group of my report and not only in the beginning of the report. I get something like this:
                             Items         Jan       Feb       March .....................Total
    Category 1                       
                             Item11         val11     Val12      Val13                     Total values
                             Item12         val21     Val22      Val23                     Total values
                             Item13         val31     Val32      Val33                     Total values
                             Items         Jan       Feb       March .....................Total
    Category 2                       
                             Item21         val11     Val12      Val13                     Total values
                             Item22         val21     Val22      Val23                     Total values
                             Item23         val31     Val32      Val33                     Total values
                             Items         Jan       Feb       March .....................Total
    Category 3                       
                             Item31         val11     Val12      Val13                     Total values
                             Item32         val21     Val22      Val23                     Total values
                             Item33         val31     Val32      Val33                     Total values
    You see the months get duplicated. Any way, my real need is to add an image or text in the header of EACH page of a cross-Tab report.
    Thanks a lot for your help.

    Hi Divya,
    you could do for example in the wdDoInit() of the view
    wdContext.currentContextElement().setPicture("picture.gif");
    Now you assign this context variable to the Tab using the Tab_header's imageSource-Property. When you click on its value column, you see a button with three dots on it. If you click on this button, you will get all context nodes and attributes for this View. Usable variables are clearly marked, you now choose the one named Picture or what ever name you prefer to use. But it must correspond to the one set in the wdDoInit.
    I think setting a picture (not necessarily for the tab-page) is done in one of the excellent tutorials. If you are a newcomer I strongly recommend doing some of the tutorials.  I have learned tremendously from them.
    Hope this helped
    Harald

  • How to delete a character at the end of each line in a file

    Hi
    How to remove a character or symbol at the end of each line in a file?
    I am having a file with every end of line conatins special chars @.
    I need to remove or delete that sysmbol from file.
    Regards

    JoeBorland wrote:
    File is large about above 20,000 lines.
    I need to find the optimum solution.
    Like reading a file and find the end of character and writing into a file.
    The above way is correct or any other way?Try it and see. Such a program will only be a dozen lines long.

  • I am editing an idvd slideshow to have some of the music selections from itunes fade out at the end of each vacation segment using music reflecting the country visited.  Is there a way to fast-forward the slideshow to observe the where the music ends.

    I am editing an idvd slideshjow to have some of the music selections fade out at the end of each vacation segment.  Is there a way I can fast-forward through the slideshow so I can see where the music is ending and adjust the time to end properly?  (without repeatedly clicking the forward button on the e-remote) 

    Thanks very much, varjak paw.  I checked half a dozen tracks on my iMac from different albums which did not copy over, plus several which did copy over.  They all show the same location:
    Users/Christina/Music/iTunes/iTunes Media/Music/Brandenburg Concertos etc. (one example)
    What does this mean relative to the music which didn't copy? Is there another step?  or somewhere else I should look?
    And wow, thanks for the info about not having legal right to keep the tracks from the CDs.  I am embarrassed that I didn't know.  I gave most of my CDs to my sister. Before I delete all this highly prized music (400-500 tracks) -- if I get the CDs back from her and keep them at my house, can I continue to keep those tracks on my iMac?  (Sister does not have iTunes or even know what an mp3 is, so it's not like she has copied or imported the CDs -- I just didn't realize I needed to retain possession.)
    Or do I still need to remove all that music from my library?
    Thank you again for your help. 
    C.

Maybe you are looking for