Printing checkbox multiple time on dialog box of module pool.

hey guys,
i want to put checkboxes on my dialog box (popup) With each entry in my ITAB. So i will be dynamic.
Example;- i have 5 names of mentor in my ITAB-NAMES. now i want to put their names on popup screen with a CHECKBOX so that i can select multiple and store the selected names of mentor in another table.
i have created the Popup but not able to create dynamic checkboxes.
thanks in advance.

Hi.,
Check this links: http://wiki.sdn.sap.com/wiki/display/ABAP/OBJECTORIENTEDALV+Guide
Example of an OO ALV that reflects changes from an editable column...
which helps for your purpose.,
also http://wiki.sdn.sap.com/wiki/display/profile/2007/07/23/OOPSALVin+ABAP
For further info., search in SND or google., you will get so many links.,
hope this helps u.,
Thanks & Regards,
Kiran

Similar Messages

How to display a screen as Popup Dialog box in Module Pool

Hi All,
I have a requirement to display a popup dialoge box into module pool.
i need to display a screen as a popup on the current screen on a button click.I have developed a screen and in atribute tab i have defined the screen type as modal dialog box but it is displaying previous screen screen is hide i want to display on the same screen as a popup.
Thanks
Narendra

Hi Narendra,
Try to trigger the popup once it is done with the previous action might be anything.
i have shown one sample code where after i click on save button when the data is saved successfully
after that it has to trigger me a popup asking for conformation for the next action.
A small piece of code
INSERT INTO ZORMD1 VALUES WA_ZORMD1.
    IF SY-SUBRC = 0.
      G_LOCAL1 = 0.
      MESSAGE S000. " Data saved successfully and immediately call the popup
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
        EXPORTING
DEFAULTOPTION = 'Y'
TEXTLINE1 = 'SUCCESSFULLY SAVED'
          TITEL = 'POPUP FOR conformation'
         START_COLUMN         = 25
         START_ROW            = 10
        CANCEL_DISPLAY       = 'X'
       IMPORTING
ANSWER = G_PRINT
IF G_PRINT = 'J'.
PERFORM PRINT_OUT.
ENDIF.
Do the modification according to your requirement.
Cheers!!
VEnk@

Need help regarding Modal dialog box in module pool programming

Hi experts,
my program need a dialo box to popup and take some data and on pressing save button in the dialog box, the popup should close and the values in the previous screen should be updated.
my problem is, when i execute the program, i am unable to close the dialog box. i tried use sy-ucomm but found it of no use.
please tell me the way to access the close button in the dialog box.

Hi,
Use the function module :-
Call function LC_POPUP_TO_CONFIRM_STEP
Exporting
TEXTLINE1 = YES
TEXTLINE2 = NO
TITEL = R U WANT TO SAVE
Exporting
ANSWER = Y.
IF SY-SUBRC = Y.
LOGIC TO SAVE DATA.
ENDIF.
REGARDS,
Mekala vijay

Remote App, Printer properties opens behind redirect dialog box

We noticed an issue in July 2013 with all redirect printers using RemoteApps on Server 2008R2.
When you clicl on File>Print and sleclt properties, the dialog box is opening behind the Windows windows telling you the printer has been redirectd by RDC. You can see the Printer Preferences and the only way to bring the window the front is
to click on the Window Title bar of the window.
I've seen others posting the same issue, but I haven't seen a resolution.

Hi,
I had the same problem in both Windows 7 and Windows 8.1.
I downloaded the fix KB3036965
https://support.microsoft.com/en-us/kb/3036965
and installed it on 2 test pc who had the problem. After I Installed the hotfix I worked.
But as Shimon Adimor say’s it is very annoying with the dialog box that appears, that informs you that the printer has been redirected. The KB3036965
does not fix this dialog. So if there is some solution to disable this dialog box it would be nice.
Thanks
Jörg Wiesemann

How do you use the Multiple Item Information dialog box ???

How do you use the Multiple Item Information dialog box ???
Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
1. The way iTunes sorts tracks and albums
2. The reason to select a leading check box
3. Why there are Option selections (Yes /No) and leading check boxes.
4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
Thanks

As Christopher says, it's a compilation. Different tracks are by different artists.
Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
tt2

Can I have the same printer installed multiple times under different names?

On WIndows I have the same printer installed multiple times
All using the same driver
I have a Canon printer that has a rear tray and a bottom tray
So, I will have one printer that prints to the rear and the other to the bottom
Other printers (the same one) will be set so that they print in high quality and in duplex for example
I'll name the printers 1.Canon 2.Canon 3.Canon etc
So, when I go to print, I just hit a number on the keyboard and the printer I want is selected
Can I do the same on my laptop?
Thanks
Omar

Back Up - that's in case things go wrong.
In the case you cite:
You have
Mother
Mother Maiden Name
as Faces, right?
In the Corkboard view click on Mother Maiden Name and delete the 'Maiden Name'.
It will disappear and all the photos will be in the Mother face.
Note that 'Mother' and 'Mother ' (that is, with a trailing space) are not the same.
You can also just edit the name 'Mother Maiden Name' to 'Mother'
As for photos staying in manual sort, I can only say that mine do. But as I've no idea what troubleshooting steps you've used.
Regards
TD

Make Custom (Run-Time Error Dialog Box)

I would like to Customize the Run-Time Error Dialog Box
bcos I want to use H/Wbuttons (need to Init the H/W) & not mouse to navigate thr the box
is the Dialog box available in Labview also

Hello aparab,
You won't be able to edit the dialog in LabVIEW for sure. Not sure if NI provide CVI / C++ source for that.
You can have your own dialog by handling the run-time error using SequenceFilePostStepRuntimeError callback. Look at this example:
http://zone.ni.com/reference/en-XX/help/370052M-01/tsexamples/infotopics/callbacks_sequencefileposts...
The example ships with TestStand as mentioned in the above link. You just have to use the information which will be in Parameters.Step container for error details and to customise your dialog.
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

How to populate list box in module pool program

How to populate list box in module pool program.
Please give me reply as soon as posible
regards,
Venu.

hi,
go thrugh the folling code .
TABLES sdyn_conn.
DATA   ok_code TYPE sy-ucomm.
Global data
TYPES: BEGIN OF type_carrid,
         carrid type spfli-carrid,
         carrname type scarr-carrname,
       END OF type_carrid.
DATA itab_carrid TYPE STANDARD TABLE OF type_carrid.
*& Processing Blocks called by the Runtime Environment                 *
Event Block START-OF-SELECTION
START-OF-SELECTION.
CALL SCREEN 100.
Dialog Module PBO
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
Dialog Modules PAI
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'SELECTED'.
      MESSAGE i888(sabapdocu) WITH sdyn_conn-carrid.
ENDCASE.
ENDMODULE.
Dialog Module POV
MODULE create_dropdown_box INPUT.
SELECT carrid carrname
                FROM scarr
                INTO CORRESPONDING FIELDS OF TABLE itab_carrid.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
       EXPORTING
            retfield        = 'CARRID'
            value_org       = 'S'
       TABLES
            value_tab       = itab_carrid
       EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
ENDMODULE.
the following code should be included in flow logic of screen
process on value-request.
field scarr-carrname module create_dropdown_box.
in module pool select list box.
hope it is useful.
regards,
sreelakshmi.

Is it possible to enter our own value in dropdown list box in Module Pool. How?

Dear Experts,
Being new to ABAP, I am trying my hands on Dropdownlist box on Module Pool.
I want to pull data from Ztable(Custom Table) into Dropdown list box on Screen in Module pool and be able to edit it, delete it and enter new data through it, thus thereby able to manage the Ztable. Is it possible in dropdown.
Looking forward for experts advice.
Regards
Deepika

Dear Kannan,
Thanks. But why sud I write an event in Table maintenance generator. My code is in Module Pool and it has no connection with Table Msintenance.
The I/O field Drop down list box is on the Screen in my Module Pool. I am able to pull data in it from Ztable but now I want to edit this pulled data and also want to enter new data in this dropdown list box.
Regards
Deepika

Dialog programming and module-pool programming

Can someone tell em the difference between <b>dialog programming and module-pool programming</b> ?

Hi Vinod ,
Actually Dialog Programming is Module pool Programming.
Please go thru this , see if your dbout gets clear.
Basic components of dialog program?
-          Screens (Dynpros)
-          Each dialog in an SAP system is controlled by dynpros.A dynpros consists of a screen
And its flow logic and controls exactly one dialog step.
-          ABAP/4 module Pool.
     Each dynpro refers to exactly one ABAP/4 dialog program .Such a dialog program is also called a module pool ,since it consists of interactive modules.
Regards,
AShwini

Unable to add a new printer in 10.5.7 - dialog box "quits"

Every time I try to add a new printer via System Preferences-->Print&Fax, the dialog box showing available printers briefly opens, and then quits. As a result, I am currently unable to add any new printers.
Help?? Thank you...

If you open Console (Applications > Utilities) and look at Console Messages you may see a reference to the Add Printer starting and stopping. This may give some clues as to the cause.
Still in Console, if you expand /Library/Logs and then expand Crash Reporter, there may be an entry for the Add Printer app.
If none of that is any help, then you could download the 10.5.7 Combo updater and ran that. If you updated to 10.5.7 using Software Update, then the Combo updater can sometimes repair files that were damaged by the sequential update.
You could also get a copy of Print Therapy from fixamacsoftware. This utility can help resolve printing system issues.
PaHu

Ordering Prints from Shutterfly - Blank White Dialog Box

I am trying to order some prints through Photoshop Elements using Shutterfly.
I select my prints I want to order, hit order prints from shutterfly.
A white dialog box appears overtop of Photoshop elements where I can login to shutterfly.
I successfully login, select my photos, select the recipient, and get to the part where it tells me the cost. I hit next and the dialog box turns white with nothing in it
I have flash player and java installed. In my resource manager I can see it trying to talk to shutterfly, but it quickly drops to no traffic being sent/receive
Even if I wait a good amount of time the white box never fills with a way for me to pay or anything like that.
Can anyone help me with this issue?
Thanks

Do the following :
Log in to shutterfly website
Go to My Account and edit Billing Information.
Launch PSE and proceed with print workflow.
The shutterfly service will now pick up the billing information and there will be no 'blank screen'
-Harpreet

Suggestion: Firefox should not hold up a windows shutdown with a multiple tab close dialog box.

I did not know where to send a suggestions, so am posting it here. Please redirect this to the appropriate place.
When I shut down windows and firefox is running with multiple tabs, it pops up a dialog box and prevents windows from shutting down. Last Friday I set the computer to shutdown before leaving work and found that it was still on when I returned to work on Monday. Reason - Firefox.
I prefer to shutdown computers when I am away for extended period of time to save power.

I do not have AVG installed.

Multiple screens & Excel dialog box placement

I'm using multiple screens with my 13" Retina Macbook Pro, and what is really annoying is that Excel places it's dialog boxes in a strange location where I cannot action them or move them.
Does anyone have an idea on how to tell Excel to ignore the other displays and just show me the dialog boxes on the screen/desktop that has the application on? Going to fullscreen or moving the windows to any other displays didnt make any difference; dialog box remains the same

On Wed, 14 Dec 2011 20:51:03 +0000, Nootrino wrote:
>
>
>Recently upgraded to Office 2010 (32bit) /Windows 7. Have hundreds of users that we support and so far most have upgraded. Noticed with some users though - not all - just a small percentage, when they click SaveAs in Excel 2010, the application
freezes. On closer scrutiny we realized what was happening was the SaveAs dialog box was BEHIND the main Excel window. The only way to restore it is to click on the tab from the Taskbar or minimize all the windows to FIND the SaveAs Dialog box.
Understandably this is causing these users stress and inconvenience. It is very unproductive and a nuisance to say the least. The only other variable here is that all these users have multiple monitors, usually 2-4. But for some, this happens
in their main monitor and/or the monitor that Excel is opened in and which has the focus. Even more strange is that this does not occur to everyone, just a handful of users so far who have reported the issue. We have also noted it happens with
other
>dialog boxes as well, not just the SaveAs so it seems generic in that sense.
>
>The other item with this issue is that it's not persistent. Users have reported it's sporadic and comes and goes.
>
>Is this a bug?
>
>Any feedback greatly appreciated.
A search using Google reveals that this may be a problem with W7, and was first reported during beta testing!
http://social.technet.microsoft.com/Forums/en/w7itprogeneral/thread/0bbefdc5-7f20-4b9f-8b24-1be76d6b7996
and for a possible fix, but with some serious caveats:
http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/7f4543cf-874d-4a39-bea5-34a824e4c0ce/
Ron

Printing form multiple times

Hi Experts,
how to print the form multiple times? . i have multiple shipto entries....for every new shipto entry form should be printed..can you please provide me with sample code..

Hi,
I cannot see if you are using sapscript or smartforms. I expect sapscript.
You need an ABAP change. The program must as first determine the SHIP TO Addresses.
Then a loop over these adresses and making the several forms (also using open and close form).
If you use a smartform you have still a loop over the adresses. But know you have also to change the smartform. You must give the addressnumber as parameter to the smartform. And the smartform must print that adressnumber,'
If you need more info. Let me know
Gr., Frank

Printing checkbox multiple time on dialog box of module pool.

Similar Messages

Maybe you are looking for