Printing Error with second user.

Thanks in advance everyone.
Here is my issue, I have an iBook G4 running 10.3.9 connected to a network printer with two user accounts, The first user account works fine and can print, however the second account cannot. It gives me the "Error Printing" message which is really helpful.
I have tried re-adding the printer, and deleting com.apple.pint... preferences files, and repairing the permissions.
Any insight would be wonderful.
Thanks,
Paul

In the second account ~/Library/Printers select the printer and Command + i. to open Get Info and check the *Ownership and permissions* down the bottom, to see if the second user can read and write to that printer.

Similar Messages

What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

Can you give more details? What exactly is the entire error message text? there should be an error number too. Are you trying to finalize this to an external disk?

"Bad request" errors in Firefox with second user account

Yesterday, I set up a second user account for my husband to use. Everything seems to work fine with one annoying exception. When Firefox 3 is used as the browser under the new user account, I get frequent "Bad Request" errors with various web mail programs (MobileMe, GMail, Earthlink's web mail).
This does not happen when the same Firefox 3 is used under my original user account. It also does not happen when performing the same functions with Safari under the new user account. It also doesn't seem to matter whether Fast User Switching is enabled or disabled.
I have tried clearing caches, deleting cookies, deleting preferences etc. in the second user's Firefox, all to no avail. Anyone have any other ideas?
I guess one thing I'm a little unclear about... is the second user actually using the same Firefox app as the first user? If so, would there be a way to install a 2nd Firefox app that would only be for the second user? I'm just thinking maybe there is some kind of conflict going on?
Any thoughts or help out there much appreciated!

I think I figured it out. I found an article online that said if you have Parental Controls enabled on an account (which I did on the second user account), it will not allow Firefox to write cookies, thus causing the "bad request" errors.
This is not exactly true, as Firefox under the new user DID seem to be writing cookies just fine. However, when I disabled Parental Controls on the account, suddenly the errors went away. So, it doesn't have to do with cookies, but there is something about having Parental Controls turned on that can cause these errors.

Connection to iTunes fails with second user account

Hi there!
For some weeks now I am experiencing Problems connecting the iTunes of a Second User to Apple TV. I keep getting the error message that the connection failed and I should check if the iTunes is in the same network. Dumb message since one second before I selected the iTunes library of the second user in the list on Apple TV and before that I watched content from the iTunes library of the first user without any problems. So it is not the network connection.
This error can be easily reproduced:
Set up multiple user accounts on Mac
Set up home sharing on Apple Tv and all iTunes of them user accounts
Restart all to beginn test
Open iTunes of any user
Access content on Apple TV without problems
Keep first user logged in and iTunes running while switching to second user on Mac
Open iTunes of second user
Second library will show up on Apple Tv
Try access second users library - error message will be shown
First iTunes library still works fine
Close first users iTunes and error will stay
Close all iTunes and restart Apple Tv
First iTunes open will work - any second will not
System:
MacOS 10.7.5, iTunes 10.7 (21), Apple Tv 2 with OS 5.1 (5201), network via Ethernet cable to Time Capsule router
Thanks for any tips to get rid of this error!
Cheers!
Gerd

Hi all!
Still the same, very reproduceable problem? No solution anyone?
Upgraded to latest OS on ATV2 (5.2.1) and iMac and iTunes (11.0.2). No result. Obviously this issue is being ignored by apple techs or it is really just me having this problem.
Thanks for any help!
Gerd

How can I fix this printer error with Samsung SCX-4300 and SCX-4521f on Windows Server 2008 R2?

I have two printers installed on Windows Server 2008 R2 (64-bit):
1. Samsung SCX-4521f
2. Samsung SCX-4300
There are two computers (Windows 7 Professional, 32-Bit) connected to this server that utilise these shared printers.
The drivers installed are as follows:
SCX-4x21_Win7_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7 3.04.96:03 Print Driver 11 Dec, 2009 12.37 MULTI LANGUAGE)
SCX-4300_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) 3.04.95:07 Print Driver Jan 19, 2011 53.07 MULTI LANGUAGE)
After printing documents for some time (within a 24 period) the printers no longer respond to print requests.
On the server opening "Control Panel\Hardware\Devices and Printers" shows the two printers with yellow exclamation marks.
The "SCX-4x21" printer shows the "Status" as "Needs troubleshooting" and "Printer: Error".
The "SCX-4300" printer shows the "Status" as "Needs troubleshooting".
Neither will print a test page.
Searching for new drivers automatically returns saying: "The best driver software for your device is already installed".
The error persists and nothing will print.
When double-clicking on the "SCX-4x21" printer (or going to "Control Panel\Hardware\Devices and Printers\Samsung SCX-4x21 Series") you see the following:
"Printer: Error" and "N document(s) in queue".
Clicking on either of these brings up the print queue and shows a document with the status of "Error - Printing".
As each job with an error is cancelled the next one attempts to print and also displays an error like the last.
Once all the jobs are cleared the printer information says "Printer: Ready".
Sending a "Print Test Page" sends the printer into an error state saying "Printer: Error".
With the "SCX-4300", sending a "Print Test Page" displays a bubble saying: "Toner Empty: Replace Toner".
However, I can't see any specific error messages.
How do I find out what exactly "Needs troubleshooting"?
Please can anyone advise further?

The printer (SCX-4300) has stopped again.
Since it has been stopped I have done your recommendations:
Unticked the "Enable bidirectional support" option under the "Ports" tab in the printer properties.
Set the "Interactive Services Detection" to Automatic and started it.
Unfortunately the printer did not start printing, the print jobs did not restart or delete.
I decided to check the Operational logs that we enabled.
The first job I see goes like this:
Information: Rendering job 41.
Error: The print spooler failed to delete the file C:\Windows\system32\spool\PRINTERS\00041.SHD, error code 0x2. See the event user data for context information.
Information: The print job 41 was sent through the print processor SSE1MPC on printer Samsung SCX-4300 Series, driver Samsung SCX-4300 Series, in the isolation mode 1 (0 - loaded in the spooler, 1 - loaded in shared sandbox, 2 - loaded in isolated
sandbox). Win32 error code returned by the print processor: 0x0.
Information:Printing job 41.
Information:Spooling job 41.
This job actually printed.
Other jobs printed fine with no error.
There are no other errors in the "Operational" log other than the "print spooler failed to delete" error.
Any ideas what to try now?
Update: Unticking the "Enable bidirectional support", clearing the print queue and then trying again seems to have fixed the problem for now.

Printing Error with Canon MF6500

I'm trying to print with my Canon MF6500 but I keep getting a printer error saying that there is an error in the connection. The strange thing is that it was working fine a couple days ago. Here are a few things:
Things I've Done:
-printed using another macbook with the same USB cord (worked)
-uninstalled and reinstalled ALL printers (did not work)
-downloaded the driver from the canon website (did not work)
-used multiple USB cords
Things that might have caused the problem:
-Used a Canon Pixma iP1800 to print
-Used a HP photosmart C1300 to scan and print
another thing to note is that when I install the printer it doesn't automatically detect the software anymore, I have to select the proper printer driver (Canon MF6500 UFR II)

anguonly wrote:
Maybe the process "UFR II BackGrounder" is the problem but I don't want to shut out something important
The Backgrounder service provides communication between the UFR2 driver and the Mac. If this service fails to run and connect to the printer then it will cause errors, such as the one you are having. You could look at stopping this service, it will restart by itself, or restarting the Mac will do the same.
With all that you have done so far I suggest you look at removing the UFR2 driver and associated files and then install v2.21 again. First remove the existing MF6500 printer queue in Print & Fax. Then trash the following files;
System Volume/Library/Printers/Canon/UFR2
System Volume/Library/LaunchAgents/jp.co.canon.UFR2.BG.plist
System Volume/Library/Printers/PPDs/Contents/Resources/CNTD**Z*2.ppd.gz
Where * indicates a character string that represents the printer model, and 2 indicates a character string that represents the corresponding language.
Then restart the Mac and install the v2.21 UFR2 driver.

Printing error with t-code j1inmis: Can not find PDL type for output device

Hi,
When using tr.code j1inmis,when we seeing the print preview iam getting below error.
The error with my system show the details as follow :
Cannot find PDL type for output device LP01.
My system is only abap stack.Guide me for the same how to resolve this.
Thanku

Hi,
When i submit the test through URL its working fine(http://192.17.0.12/AdobeDocumentServices/Config).In SM59 Both sides are working.
When I check The Test : FP_TEST_00 iam getting below error
ADS: com.adobe.ProcessingException: com.adobe.Processin(200101)
But
When I check The Test : FP_PDF_TEST_00 its working fine.
And When I check this test : FP_CHECK_DESTINATION_SERVICE without destination its working fine.
When i check with destination iam getting error : SYSTEM ERROR:com.adobe.ProcessingException:Problem accessing data from Destination:dest:FP_ICF_DATA_SMN//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE.
Guide me for the same two tests are working fine other two are getting error,guide me for the same to solve this,appreciate ur help.
Thanku

Printer Error with all iWork products

Hi. I don't have a printer attached tot eh computer but I want to save a document as a PDF. I can do this in all applications other than iWork applications. printer Error comes up. Anyone know how to solve this problem?

It seems a bit odd.
I'm able to do that on the iMac intel inside which I uses for trsts.
I never connected a printer to this beast and the Print to PDF feature works perfecly (I didn't try the export to PDF entry).
Sounds as a corrupted file somewhere.
You may try to trash:
Macintosh HD:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Pages.plist
CAUTION, this file contains the list of couples of strings used by the auto-correction tool.
Yvan KOENIG (from FRANCE vendredi 25 janvier 2008 22:48:10)

Printer error with InDesign CS4

I have the Adobe Master Collection installed on Windows 7 64bit (Pruchased through MS Volume License). Before installing windows 7, the system had Windows Vista Business 64-bit installed and had the same problem, so it is not OS related. Connected directly to the computer via USB cable is an HP Design Jet 130. All programs are able to print to it without any problems including Photoshop (64bit), Adobe Acrobat, Illustrator (32bit), Excel, Word, etc. However, when trying to print a document from InDesign, I get the following error:
print driver host for 32bit applications has stopped working
After click ok, the printer selection box comes up, with the post script printer selected. When you go and try and change the printer to ANY other printer including the DJ130, I get the following error:
Printer selection failed. Restoring the previous selection.
I am still able to print documents from InDesign by saving them as a PDF and then opening them and printing them with Adobe Acrobat Pro, however, I should not have to do this, and this can become very time consuming. The printer is also shared on the network with two other computers and they have no problem printing to it from InDesign. Before I installed Windows 7, I completely un-installed the Master Collection. After Win7 was installed, I re-installed the Master Collection, and I was able to print perfectly from Adobe InDesign. It seems that one of the updates breaks it's printing capabilities with this printer, or at least on this system.
Has anyone else experienced this issue, or are there any other things that I can try to resolve this? I have 8GB of RAM in the system and don't really see switching to a 32 bit OS to be an option as I would loose the ability to use 1/2 of my memory.

I am having the exact same problem. I have Windows 7 Pro 64-bit and Design Premium CS 5.5. InDesign is the ONLY program that will not print to any printer. I get the "Printer selection failed." error every time I select any printer, even the Adobe PDF one. I have a Brother printer, an HP Plotter, and even an Oce copier/printer. InDesign gives the error no matter what printer is selected form its own list. Photoshop and Acrobat do not give me any issues, nor does any of the MS Office programs nor Autodesk softwares. It's only InDesign that fails. Reparing doesn't do anything and reinstalling every printer driver is pointless because it's only InDesign that produces the error.
Does anyone know what to do to fix this?

"an XML element was malformed" error with anonymous user

There is no problem with another user but with anonymous user it gives "an XML element was malformed" error when I want to select data from Oracle database using BI_JDBC in VC. I have done the user mapping for the anonymous user like other users. I also give "read" and "end user" permissions for anonymous user in the BI_JDBC connection. For other users, it works. What should I do to use BI_JDBC in VC with anonymous user.
Thanks in advance

Hi Nihat,
we currently facing the same issue, did you found the solution for this, or maybe a workaround for anonymous system access? Thanks for your help!
Kind regards,
Benny

Printer Error with Shared USB printer

Greetings;
I have just installed my HP 7760 on my new G5, and I am attempting to print via shared usb to my G3 Imac which is running 10.3.9 I have used this setup lots in the past but with both MAC's running 10.3.9, Now all I get is "Print Error"!
I can see the shared printer on the G3 and select it on the G5 but it just results in a print error when I attempt to print.
Any thoughts would be most helpful

Hi Greg;
Many thanks for your interest in my problem. I have done the following;
1. Installed the latest drivers from HP on both machines
2. Removed and then added the printer.
3. Repaired permissions on both computers and restarted.
This seems to be related to 10.4.3 as I have read some references to this in other threads. Prior to the G5 with 10.4.3 I was printing with the G3'es under 10.3.9 using USB sharing with no problems. I have no problem printing from either computer when the printer is connected directly and I can see the shared printer in printer setup and have no problem selecting it however I am still getting the "print error" when printing to the shared printer.
I am going to try one more experiment, I no have the printer connected directly to the G5 with printer sharing turned on. I will try to print to it from the G3and see what happens. I will post the results when complete.
JJ
20' IMac G5 Isight Mac OS X (10.4.3) Imac 333Mhz / Imac 600Mhz

HP LaserJet Pro 300 color MFP runs cleaning and Mis Prints Error with Printing above 5 pages

I have an HP Pro 300 Printer with New genuine cartridges. But when I print or make copies of multi page jobs it always comes up with a message on the screen which says "cleaning" and then give a "Mis Printer Error".The printer is out of warranty. The Print quality is excellent but the error it gives all the time is a major problem. Has anyone solution for this? Please help! Thanks

Restoring the defaults doesnt usually purge out the memory of a printer. You need a cold reset to complete that proceedure. Cold Reset steps:http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-LaserJet-Pro-200-color-MFP-M276nw-Cold-reset/td-p/5060955 The video at the bottom of the first page is very helpful.

Officejet G85xi printer errors with Windows office 8

I recently purchased a new PC with Windows 8. I downloaded the most current drivers for my Officejet G85xi. Each time I try to print I get one or two good pages and then the printer stops and an error pops up in the control menu.

I used the G85xi without issues (other than paper supply out) using Window XP on older PC. The printer has not worked properly since it has been connected to HP Envy 700-074 running Windows 8.1. When I am lucky I get 2 full pages of print before "print error" appears. I have tried Printer Doctor, deleting the printer and re-adding it, set higher priority, checking USB 2.0 port connetion, etc. It usually will finish a text document not much more than a single page, but PDF documents are very limited. I have spent hours trying to print one 9-page PDF document. Should I ditch what was a wonderful printer? Should I ditch a new HP PC with Windows 8.1? Even if I buy a new printer, can I trust it will not stop printing on page 2 or 3 in the middle of the page?

Printer error with HP Laserjet 6L and Windows 7

I have an old but still functional HP Laserjet 6L (from the late 1990s), which is connected to a new computer running Windows 7 via USB. Windows 7 found the necessary drivers, but I am having frequent printer errors come up in the Printer queue, and the machine refuses to print. The problem is 'solved' when I restart my PC, and the document then prints. However this is a pain, and I obviously don't want to have to restart every time I want to print.
I would be very grateful for any advice on this. Thanks.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printing error with t-code FBCJ: Can not find PDL for output device prtloc

Hello , folks ,
The error with my system show the details as follow :
Cannot find PDL type for output device prtlocal
Message no. FPRUNX113
Diagnosis
No PDL type has been found for the specified output device.
System Response
Error message
Procedure
Contact your system administrator.
Procedure for System Administration
For more information, see SAP Note 685571.
Our Basis can not solve the problems .
anybody know what's wrong with it ?
Thanks a lot .

other problems could be:
C drive is full
ADS folder under C:\Temp are write protected

Printing Error with second user.

Similar Messages

Maybe you are looking for