Printer Error with all iWork products

Hi. I don't have a printer attached tot eh computer but I want to save a document as a PDF. I can do this in all applications other than iWork applications. printer Error comes up. Anyone know how to solve this problem?

It seems a bit odd.
I'm able to do that on the iMac intel inside which I uses for trsts.
I never connected a printer to this beast and the Print to PDF feature works perfecly (I didn't try the export to PDF entry).
Sounds as a corrupted file somewhere.
You may try to trash:
Macintosh HD:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Pages.plist
CAUTION, this file contains the list of couples of strings used by the auto-correction tool.
Yvan KOENIG (from FRANCE vendredi 25 janvier 2008 22:48:10)

Similar Messages

How can I fix this printer error with Samsung SCX-4300 and SCX-4521f on Windows Server 2008 R2?

I have two printers installed on Windows Server 2008 R2 (64-bit):
1. Samsung SCX-4521f
2. Samsung SCX-4300
There are two computers (Windows 7 Professional, 32-Bit) connected to this server that utilise these shared printers.
The drivers installed are as follows:
SCX-4x21_Win7_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7 3.04.96:03 Print Driver 11 Dec, 2009 12.37 MULTI LANGUAGE)
SCX-4300_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) 3.04.95:07 Print Driver Jan 19, 2011 53.07 MULTI LANGUAGE)
After printing documents for some time (within a 24 period) the printers no longer respond to print requests.
On the server opening "Control Panel\Hardware\Devices and Printers" shows the two printers with yellow exclamation marks.
The "SCX-4x21" printer shows the "Status" as "Needs troubleshooting" and "Printer: Error".
The "SCX-4300" printer shows the "Status" as "Needs troubleshooting".
Neither will print a test page.
Searching for new drivers automatically returns saying: "The best driver software for your device is already installed".
The error persists and nothing will print.
When double-clicking on the "SCX-4x21" printer (or going to "Control Panel\Hardware\Devices and Printers\Samsung SCX-4x21 Series") you see the following:
"Printer: Error" and "N document(s) in queue".
Clicking on either of these brings up the print queue and shows a document with the status of "Error - Printing".
As each job with an error is cancelled the next one attempts to print and also displays an error like the last.
Once all the jobs are cleared the printer information says "Printer: Ready".
Sending a "Print Test Page" sends the printer into an error state saying "Printer: Error".
With the "SCX-4300", sending a "Print Test Page" displays a bubble saying: "Toner Empty: Replace Toner".
However, I can't see any specific error messages.
How do I find out what exactly "Needs troubleshooting"?
Please can anyone advise further?

The printer (SCX-4300) has stopped again.
Since it has been stopped I have done your recommendations:
Unticked the "Enable bidirectional support" option under the "Ports" tab in the printer properties.
Set the "Interactive Services Detection" to Automatic and started it.
Unfortunately the printer did not start printing, the print jobs did not restart or delete.
I decided to check the Operational logs that we enabled.
The first job I see goes like this:
Information: Rendering job 41.
Error: The print spooler failed to delete the file C:\Windows\system32\spool\PRINTERS\00041.SHD, error code 0x2. See the event user data for context information.
Information: The print job 41 was sent through the print processor SSE1MPC on printer Samsung SCX-4300 Series, driver Samsung SCX-4300 Series, in the isolation mode 1 (0 - loaded in the spooler, 1 - loaded in shared sandbox, 2 - loaded in isolated
sandbox). Win32 error code returned by the print processor: 0x0.
Information:Printing job 41.
Information:Spooling job 41.
This job actually printed.
Other jobs printed fine with no error.
There are no other errors in the "Operational" log other than the "print spooler failed to delete" error.
Any ideas what to try now?
Update: Unticking the "Enable bidirectional support", clearing the print queue and then trying again seems to have fixed the problem for now.

Printing Error with Canon MF6500

I'm trying to print with my Canon MF6500 but I keep getting a printer error saying that there is an error in the connection. The strange thing is that it was working fine a couple days ago. Here are a few things:
Things I've Done:
-printed using another macbook with the same USB cord (worked)
-uninstalled and reinstalled ALL printers (did not work)
-downloaded the driver from the canon website (did not work)
-used multiple USB cords
Things that might have caused the problem:
-Used a Canon Pixma iP1800 to print
-Used a HP photosmart C1300 to scan and print
another thing to note is that when I install the printer it doesn't automatically detect the software anymore, I have to select the proper printer driver (Canon MF6500 UFR II)

anguonly wrote:
Maybe the process "UFR II BackGrounder" is the problem but I don't want to shut out something important
The Backgrounder service provides communication between the UFR2 driver and the Mac. If this service fails to run and connect to the printer then it will cause errors, such as the one you are having. You could look at stopping this service, it will restart by itself, or restarting the Mac will do the same.
With all that you have done so far I suggest you look at removing the UFR2 driver and associated files and then install v2.21 again. First remove the existing MF6500 printer queue in Print & Fax. Then trash the following files;
System Volume/Library/Printers/Canon/UFR2
System Volume/Library/LaunchAgents/jp.co.canon.UFR2.BG.plist
System Volume/Library/Printers/PPDs/Contents/Resources/CNTD**Z*2.ppd.gz
Where * indicates a character string that represents the printer model, and 2 indicates a character string that represents the corresponding language.
Then restart the Mac and install the v2.21 UFR2 driver.

Printer error with InDesign CS4

I have the Adobe Master Collection installed on Windows 7 64bit (Pruchased through MS Volume License). Before installing windows 7, the system had Windows Vista Business 64-bit installed and had the same problem, so it is not OS related. Connected directly to the computer via USB cable is an HP Design Jet 130. All programs are able to print to it without any problems including Photoshop (64bit), Adobe Acrobat, Illustrator (32bit), Excel, Word, etc. However, when trying to print a document from InDesign, I get the following error:
print driver host for 32bit applications has stopped working
After click ok, the printer selection box comes up, with the post script printer selected. When you go and try and change the printer to ANY other printer including the DJ130, I get the following error:
Printer selection failed. Restoring the previous selection.
I am still able to print documents from InDesign by saving them as a PDF and then opening them and printing them with Adobe Acrobat Pro, however, I should not have to do this, and this can become very time consuming. The printer is also shared on the network with two other computers and they have no problem printing to it from InDesign. Before I installed Windows 7, I completely un-installed the Master Collection. After Win7 was installed, I re-installed the Master Collection, and I was able to print perfectly from Adobe InDesign. It seems that one of the updates breaks it's printing capabilities with this printer, or at least on this system.
Has anyone else experienced this issue, or are there any other things that I can try to resolve this? I have 8GB of RAM in the system and don't really see switching to a 32 bit OS to be an option as I would loose the ability to use 1/2 of my memory.

I am having the exact same problem. I have Windows 7 Pro 64-bit and Design Premium CS 5.5. InDesign is the ONLY program that will not print to any printer. I get the "Printer selection failed." error every time I select any printer, even the Adobe PDF one. I have a Brother printer, an HP Plotter, and even an Oce copier/printer. InDesign gives the error no matter what printer is selected form its own list. Photoshop and Acrobat do not give me any issues, nor does any of the MS Office programs nor Autodesk softwares. It's only InDesign that fails. Reparing doesn't do anything and reinstalling every printer driver is pointless because it's only InDesign that produces the error.
Does anyone know what to do to fix this?

Printer Error with Shared USB printer

Greetings;
I have just installed my HP 7760 on my new G5, and I am attempting to print via shared usb to my G3 Imac which is running 10.3.9 I have used this setup lots in the past but with both MAC's running 10.3.9, Now all I get is "Print Error"!
I can see the shared printer on the G3 and select it on the G5 but it just results in a print error when I attempt to print.
Any thoughts would be most helpful

Hi Greg;
Many thanks for your interest in my problem. I have done the following;
1. Installed the latest drivers from HP on both machines
2. Removed and then added the printer.
3. Repaired permissions on both computers and restarted.
This seems to be related to 10.4.3 as I have read some references to this in other threads. Prior to the G5 with 10.4.3 I was printing with the G3'es under 10.3.9 using USB sharing with no problems. I have no problem printing from either computer when the printer is connected directly and I can see the shared printer in printer setup and have no problem selecting it however I am still getting the "print error" when printing to the shared printer.
I am going to try one more experiment, I no have the printer connected directly to the G5 with printer sharing turned on. I will try to print to it from the G3and see what happens. I will post the results when complete.
JJ
20' IMac G5 Isight Mac OS X (10.4.3) Imac 333Mhz / Imac 600Mhz

HP LaserJet Pro 300 color MFP runs cleaning and Mis Prints Error with Printing above 5 pages

I have an HP Pro 300 Printer with New genuine cartridges. But when I print or make copies of multi page jobs it always comes up with a message on the screen which says "cleaning" and then give a "Mis Printer Error".The printer is out of warranty. The Print quality is excellent but the error it gives all the time is a major problem. Has anyone solution for this? Please help! Thanks

Restoring the defaults doesnt usually purge out the memory of a printer. You need a cold reset to complete that proceedure. Cold Reset steps:http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-LaserJet-Pro-200-color-MFP-M276nw-Cold-reset/td-p/5060955 The video at the bottom of the first page is very helpful.

Printer error with HP Laserjet 6L and Windows 7

I have an old but still functional HP Laserjet 6L (from the late 1990s), which is connected to a new computer running Windows 7 via USB. Windows 7 found the necessary drivers, but I am having frequent printer errors come up in the Printer queue, and the machine refuses to print. The problem is 'solved' when I restart my PC, and the document then prints. However this is a pain, and I obviously don't want to have to restart every time I want to print.
I would be very grateful for any advice on this. Thanks.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Printing error with t-code j1inmis: Can not find PDL type for output device

Hi,
When using tr.code j1inmis,when we seeing the print preview iam getting below error.
The error with my system show the details as follow :
Cannot find PDL type for output device LP01.
My system is only abap stack.Guide me for the same how to resolve this.
Thanku

Hi,
When i submit the test through URL its working fine(http://192.17.0.12/AdobeDocumentServices/Config).In SM59 Both sides are working.
When I check The Test : FP_TEST_00 iam getting below error
ADS: com.adobe.ProcessingException: com.adobe.Processin(200101)
But
When I check The Test : FP_PDF_TEST_00 its working fine.
And When I check this test : FP_CHECK_DESTINATION_SERVICE without destination its working fine.
When i check with destination iam getting error : SYSTEM ERROR:com.adobe.ProcessingException:Problem accessing data from Destination:dest:FP_ICF_DATA_SMN//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE.
Guide me for the same two tests are working fine other two are getting error,guide me for the same to solve this,appreciate ur help.
Thanku

Officejet G85xi printer errors with Windows office 8

I recently purchased a new PC with Windows 8. I downloaded the most current drivers for my Officejet G85xi. Each time I try to print I get one or two good pages and then the printer stops and an error pops up in the control menu.

I used the G85xi without issues (other than paper supply out) using Window XP on older PC. The printer has not worked properly since it has been connected to HP Envy 700-074 running Windows 8.1. When I am lucky I get 2 full pages of print before "print error" appears. I have tried Printer Doctor, deleting the printer and re-adding it, set higher priority, checking USB 2.0 port connetion, etc. It usually will finish a text document not much more than a single page, but PDF documents are very limited. I have spent hours trying to print one 9-page PDF document. Should I ditch what was a wonderful printer? Should I ditch a new HP PC with Windows 8.1? Even if I buy a new printer, can I trust it will not stop printing on page 2 or 3 in the middle of the page?

Printing error with t-code FBCJ: Can not find PDL for output device prtloc

Hello , folks ,
The error with my system show the details as follow :
Cannot find PDL type for output device prtlocal
Message no. FPRUNX113
Diagnosis
No PDL type has been found for the specified output device.
System Response
Error message
Procedure
Contact your system administrator.
Procedure for System Administration
For more information, see SAP Note 685571.
Our Basis can not solve the problems .
anybody know what's wrong with it ?
Thanks a lot .

other problems could be:
C drive is full
ADS folder under C:\Temp are write protected

SAP not printing LCR with all WP invoices

Hi!
I have to build a query to identify missing output ZD00(LCR-load confirmation contract) for sales org ca01, billing type ZOF2 invoices of sales document type ZWP.
For this I started with a infoset and joined tables vbrk,vbrp,vbak,nast.
Here as per requirement I put the selection criteria as asked ie vbeln,fkdat,ernam,and erdat and the result screen as vbeln,fkdat,ernam,erdat,vbpa-parvw(header partner function ZB(load confirmation contract and kunnr customer number of billing doc, headeer partner function RE(bill to party) and customer number of billing doc, attribute 2 of bill to party ie. kna1-katr2 and name of bill to party as kna1-name1.
The problem I am facing is linking the logic which are as follows.
i.     VBRK: selection criteria & CA01(Sales Org) & ZOF2(Billing Type) are used to identify Billing Document #
ii.     VBRP: above billing document # is used to identify the first available item & its Sales Doc (VBRP-AUBEL) #
iii.     VBAK: above Sales Doc # is used to identify the Sales Doc. Type (VBAK- AUART), and ZWP Sales Documents will be used to narrow down Billing Document list.
iv.     NAST: above billing document # is used to identify missing ZD00 billing document list. The narrowed billing document list will be presented to users, with additional data as specified in (3).
If someone can help me put up the things in place as this has haulted any more printing process and become urgent issue, it would be very kind of you and points awarded definitely.
Thanks
Aarav

You may check these threads if you haven't done so yet:
/message/7370904#7370904 [original link is broken]
Re: Printing problems with HP Laserjet P2015DN
HP CP2025n

Printing error with odd/even pages

Apologies if this is the wrong group, I looked for a more
appropriate one
but there doesn't seem to be one on this server. If there's a
better place
to ask this question, please let me know.
Anyhow, I'm using Acrobat Reader, latest version (I updated
off the Adobe
site after first noticing the error just to be sure), and I'm
having a
couple of serious bugs when it comes to printing odd-only or
even-only pages
of a multi-page document. (I don't have one of those snazzy
re-feeder
printers that can do both sides, so if I want to print
double-sided I have
to do first one then the other.) At any rate, the problems
are thus: on a
document which has an odd number of pages, if I tell it to
print all
odd-numbered pages, it will invariably skip the first page.
This one's not
that serious, as I can just manually print page 1 after the
fact. The
really annoying problem occurs when I try to print the
even-numbered pages.
What happens in this case is it prints the first page (i.e.
Page 2) *twice*.
Once on the back of page 1 and again on the back of page 3.
Needless to
say, I now have to throw one of them out and redo it. (I've
taken to
printing the even-pages first now, so I can use the backside
of that extra
page 2 for scrap paper, whereas previously the extra sheet
was basically
useless as it was printed on both sides.) The bug does not
seem to occur
with documents that have an even number of pages. Only those
with an odd
number. Doesn't matter if I choose back-to-front or
front-to-back. Doesn't
matter what printer I use, I've tried 3 different ones (and
made sure I had
the latest drivers for each) and it happens in every case.
I'm guessing
that there's some confusion in the software as to the number
of pages it's
supposed to print. If a document has an odd number of pages,
there's one
more odd-numbered page than there are even-numbered pages,
and it's getting
it backwards, printing one more even-numbered page and one
less odd-numbered
page. Anyhow, it's really annoying, and a waste of paper and
ink as well.
Any ideas how to avoid this? (Seriously considering editing
the documents
and adding one blank page to the end of every document with
an odd number,
though it seems like that shouldn't be necessary...)

Thank you for your response. These forums are specific to the
Acrobat.com website and its set of hosted services, and do not
cover the Acrobat family of desktop products. Please visit the
following forums for any questions related to the Acrobat family of
desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/

Printer Error - HP All-in-One Printer App

I have the HP Photosmart B210 and have been using the HP Printer Control app on my Lenovo laptop. It has worked successfully until a few weeks ago. When I read some of the reviews on the updated app - which is now HP All-in-One Printer Remote, I realized upgrading to Windows 8.1 may help. Once updated to Windows 8.1 I did start printing! However, my documents would only print half-way through and then I receive an error message and the printing stops. So, I will get one or two pages out of a 4 to 5 page document with the same Error message half-way through. No description about the error - just error - printing has to be cancelled. Suggestions? Pleeeeaaaassssseeee!

Hello Seahorse1305,
Welcome to the forums!
I am here to assist you with the printing issue you are having with your Photosmart B210. The first thing I do recommend, is running the HP Print and Scan Doctor to find and fix printing and scanning problems. If there is more of an issue that the tool cannot fix, it will let you know what the problem is.
Please let me know how this turns out for you!
Thanks,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Fix for Dreamweaver CC 2014.1 JavaScript Error With All ASPX Files

Entire morning wasted.
Adobe's upgrade to Dreamweaver 2014 to 2014.1 on Windows 7 Professional has broken the product across the board and it no longer opens any .aspx pages correctly. A large number of people use .NET and now we can no longer access/use these files/pages without multiple JavaScript errors. Particularly those that have edited the MMDocumentTypes file to make the product work in the first place since they stopped supporting the users that develop in ASP.NET.
Every time a .aspx file is now opened, the following JavaScript error is received: "While executing translateCustomControl in ExternalRenderers.html, a JavaScript error occurred. Click 'close' and it appears again...over and over. Our sites are all unable to open in DW because of this. It worked fine in earlier versions of DW, including 2014. It's only 2014.1 that broke everything.
The fix for this:
1. Follow instructions on this out-of-date help file: Change, add recognized file extensions | Dreamweaver
2. (and the part that's new): The MMDocumentTypes file is located in C:\Users\*your username*\AppData\Roaming\Adobe\Dreamweaver CC\Configuration\DocumentTypes directory. Open that file and add aspx back to the <documenttype id="HTML"> declaration at the top.
I am posting this issue here in hopes that some of the users won't waste most of the day trying to figure this out.
Chris Lee

Hi Ivan,
I'm having that exact same problem now...in addition to that JavaScript error message coming back. I submitted a bug report last week about this and received the following reply:
Hi Chris,
We would like to let you know that we able to reproduce this issue at our end. Thanks for reporting this.
We will try to prioritize it for fixing. This might take some time. We thank you for your patience with us in this regard.
Please let us know if you need help regarding anything else. We will be more than happy to help you.
Thanks,
Arindam Ghosh
Dreamweaver Team,
Adobe Systems
Hopefully they can get this fixed soon, as it's ground my work in the software to a halt.
Chris

Adobe Reader X Printing Error with HP 5p

I recently updated to Adobe Reader X and now my printer won't print any PDFs. I can print the same PDF with Adobe 9 on another computer so it is not the printer. It prints and error page saying:
"This job requires more memory then is available in this printer.
Try one or more of the following, and then print agian:
     For the output format, choose Optimize For Portability.
     In the Device Settings page, make sure the Available PostScript Memory is accurate.
     Reduce the number of fonts in teh document.
     Print the document in parts."
I have tried all of the these and still get the same error message. I am glad I still have a copy of reader '9' that I will reinstall, but I hope someone at Adobe will fix this bug in 'X'.

I'm having the exact same problem. My document is a one-page item distributed by the federal government, so theoretically no problems within it that would give the public problems. I found a similar message about this in Adobe's forums where the person was told they should not have Adobe Acrobat 9 Pro and Adobe Reader 10 installed at the same time. Well removing Acrobat is dangerous, because when I installed Adobe Dreamweaver CS5, an expensive Web design tool, its installer said Acrobat was required for Dreamweaver to function. And one more thing: This effor message we're getting talks about going to the Device Settings page and making sure the Available PostScript Memory is accurate. I can't find a Device Settings page. I've even Googled the Web to find out what it might be; no luck!!

Printer Error with all iWork products

Similar Messages

Maybe you are looking for