Printing In Main Window in Smartform After All Line Items

Hi All.
I have this requirement wherein I have to Print Export Charges in main window , below all the line items.
There is a loop on line item tables and I am printing all line items in the main window.
How to print this export charges after all the line items?
Points are assured !!!!

Hi,
Create two row line in the main area of the table. First one for line items and the next for the export charges.
Hope this ll help u.
(Sorry, this ll print export charges after every line items, try to print the export charges in the footer of the table.)
Regards,
Prabhu
Edited by: Prabhuraj Krishnan on Apr 15, 2008 11:05 AM

Similar Messages

How to limit the size of main window height according to the line items?

Hi,
In my requirement,I created one page with main window in smartforms....Suppose say main window can accomodate 40 line items.
I am getting 5 pages data.And in my last page ( ie 5'th page ) I will have only 20 line items.But for the remaing 20 line items,
it showing empty area .I dont want this empty area .I want that window size to be restricted dynamically to that 20 line items.I created widow with borders and one vertical line between the columns.....I created two columns.
Please I dont want any horizontal lines between the line items but I created one vertical line between the columns..
This is in Smartforms
Any right help would be appreciated.
Thanks,
Chinnu

Hi Abhijit,
                This problem is solved but I have the below another new problem.Can you pls help me in this regard.
            My requirement is to calculate the subtotal of a particular page and to print that subtotal
            at the end of each page.And this subtotal has to be carry forwarded as the first item of the next page(say page2).
            And again at the end of this page(page2) I have to print the subtotal and needs to carry forward this subtotal again on to
            the first item of the page3..
           My problem is I am doing it in a table.I am calculating the subtotal and displaying the subtotal at the footer of the table..
           In the footer again I am redefining table work area values with the text 'Subtotal' and subtotal Amount so that thinking
           that it would print as first line item on the next new page....
          But the problem is I am getting subtotal as 2'nd line item on each new page instead of first line item of each page.........
          Can anyone resolve this issue.........
          I dont want this subtotal to be printed on the last page since I am getting Total of all these subtotals.....
          Below is my required structure
Page 1.
                Desc                               Amount
                x                                      100
                y                                      200
               Subtotal                            300
Page2.(Required page2)
             Desc                               Amount
                a                                      100
                b                                      200
               Subtotal                            600
Page2.(But getting as below,which I dont require )
                Desc                               Amount
                 a                                     100
               Subtotal                            300
                 b                                      200
               Subtotal                            600
Page3.(Required page3)( I dont require Subtotal here on the last page)
             Desc                               Amount
                a                                      100
                b                                      200
               Total                                 900
Any suggestions pls
This is in Smartform
Thanks,
Chinnu

Problem in printing multiple main window in smartforms

Hi Experts,
I have requirement form client to print PO which consists of 4 page.
First page is cosists of header and some text.
In second page different header and line item.
Thirs page different header and line item.
4th page different header and line item.
I have printed tex in main window of first page and called command to trigger
second page main window, but i am getting dump.
How to print the line item in the multiple page of smartforms.
Regards,
Udupi

Hello ,
To print the text below are following steps which you can follow for your requirement :
1. Create the Four pages having the Main Window, but take care that Logic should be in First Page Main window only , other pages main window will be blank.
2. Create the Secondary Window in second, third & fourth page which will be same size as the main window having the text which need to be print in respective pages.
3. Logic Part - in the main window of first page fill all the data which you need to print in 1st to 4th page in different internal table. Now for example you need to print text in first page then in Main window create table having the data of 1st page.
To print data in Second page create one more table having data of secondpage and put the Command there (follow the same for next pages,)
I hope this will help you
Thanks
Romit Raina

How to limit the size of the main window width according to the line items?

Hi,
       In my requirement,I created one page with main window....Suppose say main window can accomodate 40 line items.
      I am getting 5 pages data.And in my last page ( ie 5'th page ) I will have only 20 line items.But for the remaing 20 line items,
     it showing empty area .I created widow with borders and one vertical line between the columns.....I created two columns.
     Please I dont want any horizontal lines between the line items but I created one vertical line between the columns..
       Any right help would be appreciated.
Thanks,
Chinnu
Moderator message - Welcome to SCN.
But duplicate posting is not allowed. If you have information you want to add to your post, you can edit it or post a follow up - Thread locked
Edited by: Rob Burbank on Feb 19, 2010 12:17 PM

One way is to periodically (say every week) create a new file to store the actions and then, when the space taken up by all the files is too large, delete the oldest one.
You can also have your application periodically (say the first time you write to the file on any calendar day) check the size of the file and, when it gets too big, copy all of the actions in the file after a given time (presumably there is an associated timestamp with each action) to a new file. Then delete the old file.

Print Invoice Header Text In Main Window of Smartforms

Helo Gurus !!!
I want to print Invoice header text in main window of smartform.
There are total 5 columns.
Item Quantity Description UnitPrice Amount
Now what I want is to print header text below Description column, there is a loop on the table in main window.
This header text will be printed only once. This is a standard header text
How to get this?
Points are assured !!!

Hi Anay Kulkarni,
I understood that u need to print this header text
Item Quantity Description UnitPrice Amount
So please use TABLE instead of LOOP in the table we can prin header, main area, footer.
place the header text in header area in table... i am sure this can resolve it.....
feel free to contact me if issue is not resolved/.....
dont forget to reward points....
all the best...
Regards,
Sreeniasa Sarma K.

Printing in only last line item printing in main window

Hi All,
My requiremnet is to print same data in two blocks for F110 payment cheque
Iam using 2 main windows to print same data if block exceeds it will go to next page
iam calling the windows as shown below
CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        window   = 'MAIN00'
        element = hlp_ep_element
        function = 'APPEND'
      EXCEPTIONS
        window   = 1
        element = 2.
    IF sy-subrc EQ 2.
      err_element-fname = t042e-zforn.
      err_element-fenst = 'MAIN00'.
      err_element-elemt = hlp_ep_element.
      err_element-text = text_525.
      COLLECT err_element.
    ENDIF.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        window   = 'MAIN01'
        element = hlp_ep_element
        function = 'APPEND'
      EXCEPTIONS
        window   = 1
        element = 2.
    IF sy-subrc EQ 2.
      err_element-fname = t042e-zforn.
      err_element-fenst = 'MAIN01'.
      err_element-elemt = hlp_ep_element.
      err_element-text = text_525.
      COLLECT err_element.
    ENDIF.
Iam getting only last line item printing in main window
Please provide the inputs.
Thanks,
Kamalakar.
Please use code tags.
Edited by: Rob Burbank on Nov 25, 2011 11:51 AM

Hi,
My requirement was to print same block twice in cheque printing of F110.
I have used the function module 'WRITE_FORM_LINES' to print more than one line item in secondary window in the script .
fill the Lines internal table as shown below.
Example :
    lines-tdformat = 'TM'.
    CONCATENATE regup-xblnr ',,' w_date ',,' w_bsak-sgtxt ',,' w_gross ',,' w_dis ',,'
    w_net INTO lines-tdline.
APPEND lines.
CALL FUNCTION 'WRITE_FORM_LINES'
      EXPORTING
       function                       = 'APPEND'
       header                         = header_t
       type                           = 'BODY'
       window                         = 'MAIN01'
    IMPORTING
      FROMPAGE                       =
      PENDING_LINES                  =
      TABLES
        lines                          = lines
     EXCEPTIONS
       function                       = 1
       type                           = 2
       unopened                       = 3
       unstarted                      = 4
       window                         = 5
       bad_pageformat_for_print       = 6
       spool_error                    = 7
       codepage                       = 8
       OTHERS                         = 9
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.

Open status of Credit Memo after rejecting all line items

Dear Gurus
I am facing a problem. In my company we are using 2 credit memo types. One is CR and other ZCR (Copy of CR). I have tried both but both have same problem. I have also tried creating credit memos with reference to billing document, sales document and without reference also but the issue is same.
Problem is this we create credit memo with VA01 and post it with VF01. After posting if we cancel its posting with VF11 and reject the line items in VA02 the status of credit memo remain open. Cancellation documents are ok and completed but only credit memo in VA02 remain open even after rejecting all line items.
I have checked incomplete log of sales document type (CR and ZCR) in VOV8 and item types (G2N) in VOV7. All fields which are defined in incompletion log are there in document header and item.
Following is the copy paste data of Header Status tab
Overall status       Open
Rejection status     Everything rejected
Credit status        Not performed
Bill.stat.order-rel. Not invoiced
Overall blkd status Not blocked
Header data     Complete                   Item data       All items complete
Header dlv.data Complete                 Item deliv.data All items complete
Header bill.dat Complete                   Item bill.data All items complete
please help.

dear sir
if you mean to say to check Reason for rejection's settings in OVAG i have checked it and all rejection reasons are being in use in all other sales documents too. They are working fine in all other sales document. Issue is only in these two credit memos types.
Assigned by the System (Internal)
Delivery date too late
Poor quality
Too expensive
Competitor better
Guarantee
Unreasonable request
Cust.to receive replacement
Transaction is being checked
These are reasons and Stat column is empty for all. Other 3 columns have no tick in any reason.

Sum of all line items and display at the bottom of the page

Hi ABAPers,
I am displaying line items in the main window based on PO number ....and I've a coloumn Total amount.
My requirement is after the line items , the grand total which is the sum of all line items has to be displayed.
Is this possible. If so, can anybosy help me in that.
thanks in advance

Hi ,
It is possible.
For that u have to do following
take one variable of same type on which you want to calculate total ... declare in global variable
double click in the table goto the calculation tab in that give the variable on which u want to calculate total
print in the total in the footer of the table ..
Hope you resolve your problem
Let me know any concerns......

How to insert horizontal line dynamically after every line item in sapscrip

Hi All,
I have to insert a horizontal line after every new item in sap script.
How to do this .
In some material there is2 line item or in other line item it ay be more .
How to insert horizontal line dynamically after every line item
Point will be rewarded
Regards
Niraj

Hi Niraj,
You can get your work done by keeping the horizontal line (&ULINE&) after all the item level fields, in this case once each item line is written you will get a horizontal line.
In case you have different fields for the item lines which are optional (not printed every time) then you can have them in an IF....ENDIF condition and below the endif use a horizontal line.
Some thing like this:
/E ITEM_HEADER
IL <TI>Item,,Material,,Description</>
IP <TI>,,,,Quantity,,,,Price,,Price unit,,,,,,Value</>
/ &ULINE(71)&
Let me know if this helps, else please describe your problem with an example.
Luck.

Changing line item delivery address in shopping cart need to reflect same in all line items

Hi All,
Need help on below,
I have a requirement that when we change the shopping cart line item delivery address same needs to reflect all line items.
Suppose a shopping cart having 3 line items 1, 2 and 3. if i change the delivery address of line item 1, the same needs to reflect the line item 2 and 3 as well.
In my case if we change the 1's delivery address, after processing its genrating the IDOC on line item wise not in the header wise. And same having the different delivery address.
Thanks in advance.
regards:
Ramesh

Hello Ramesh,
we can do this changes in BBP_DOC_CHANGE_BADI . Create a Implementation for the above BADI and Inside that Implementation BADI method just call the function module BBP_PD_SC_GETDETAIL for SC item details by passing the Header GUID.
Once you get the Partner table(E_PARTNER) details.. Keeping a loop on SC item(E_ITEM) and change address number(ADDR_NO) in Partner table when Partner function eq X( X is an partner function values which you define in SPRO.).
pseudo logic:
CALL FUNCTION 'BBP_PD_SC_GETDETAIL'
    EXPORTING
      i_guid    = l_guid
    TABLES
      e_item    = lt_item
      e_partner = lt_partner.
* Check for all the line items if vendor is assigned
LOOP AT lt_item INTO lwa_item.
    READ TABLE lt_partner INTO lwa_partner
                      WITH KEY partner_fct = '00000019'
                               del_ind     = space
                               p_guid      = lwa_item-guid.
    IF sy-subrc eq 0 .
   * modification of address number logic here in partner table
    ENDIF.
ENDLOOP.
All the best.
Regards,
Sankarbabu

Can it not possible that i can retrive it for all line items in a single qu

I have to make report for my application in which I am facing a following problem:
In the application there are multiple suppliers and each supplier having multiple line items and each item having multipale events. each evant having three status GREEN,RED and BLUE.
When a user select 'all suppliers' to show the the status time span for a supplier (i.e. for a supplier how many parts and upto how much time parts are in blue, red and green status)
to show the cumulative status time span I have to find out a event for each line item which is having nearest lower entry time from the lower part of the given time span.for this i have write following query
SELECT * FROM parts_events
WHERE vendorid = ? AND partid = ?
AND visible = 'visible' AND active = 1
AND entrytime = (SELECT MAX(entrytime) as
entrytime from parts_events
WHERE vendorid = ?
AND partid = ?
AND entrytime < ?
AND visible = 'visible'
AND active = 1)
the problem is that i have to fire this query for each line item, can it not possible that i can retrive it for all line items in a single query?

maybe if you can post some sample data and output will help us analyze more youre requirement.

Which all tables suffice all line item GL data requirements

Please clarify this requirement for Line Item Data from New GL. my client BMW Inc have configured New GL in ECC 6.0 if i pull all the records to BW from FAGLFLEXA (Line Item Table) is that sufficient to meet the <b>all line item GL data</b> or is there any other tables missing that also shall be combined to bring the Line item GL data. Please help me for this if u can check with any of your friends in FICO.
2. I have seen that BSEG AND BKPF are used earlier in old FI versions so what is there now in New GL ECC 6.0 that will suffice for these BSEG AND BKPF or still i have to pull records by using these tables. for GL Line Item Data.
If you can help me to give the short overview of New GL posting process it would be great.
Thanks
Regards
Soniya Kapoor

Hi Soniya,
FAGLFLEXA & FAGLFLEXT would contain all FI line item
http://help.sap.com/saphelp_erp2005vp/helpdata/en/a8/e26840b151181ce10000000a1550b0/content.htm
Pls assign points as way to say thanks

BAPI_SALESORDER_CREATEFROMDAT2 ...not updating quantity of all line items

Hi All,
I'm using BAPI_SALESORDER_CREATEFROMDAT2 to create a sales order where order type is having multiple line items.
All the fields are being updated in SAP correctly . But quantity field is updated only for first line item. For all other items, all fields are being updated except quantity. I checked in Debugging and all the values for all line items are coming correct.
Pls suggest me.
Thanks in advance..
Rudresh
Mumbai

Hi Rudresh
Please check if you are passing Schedule lines for the same.
Itz better if you pass item number for ORDER_ITEMS_IN. Use the same as reference for ORDER_ITEMS_INX, ORDER_SCHEDULES_IN, ORDER_SCHEDULES_INX, ORDER_CONDITIONS_IN, ORDER_CONDITIONS_INX.
Kind Regards
Eswar

ME21N - new field added and same value posted to it for all line items

hi all
i have added new field under item level in me21n screen.
data for new filed fetched from tables with values entered in header level material number.
For one record, it is ok
but for multiple records, same value is fetched for all line items
i have written coding in screen exit for 0111
and function exits EXIT_SAPMM06E_016 and EXIT_SAPMM06E_018
how to solve
pl help
regards
senthil

MODULE STATUS_0111 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
if sy-tcode eq 'ME23N' or sy-tcode eq 'ME23'.
    LOOP at SCREEN.
      if screen-group1 ne 'PCS'.
        screen-input = 0.
        MODIFY SCREEN.
      endif.
    ENDLOOP.
ENDIF.
TYPES : BEGIN OF ty_cabn1,
         atnam TYPE cabn-atnam,
       end of ty_cabn1.
DATA : itab_cabn1 TYPE STANDARD TABLE OF ty_cabn1 INITIAL SIZE 0,
         wa_cabn1 TYPE ty_cabn1.
TYPES : BEGIN OF ty_cawn1,
    atinn TYPE cawn-atinn,
    atzhl TYPE cawn-atzhl,
    atwrt TYPE cawn-atwrt,
    end of ty_cawn1.
DATA : itab_cawn1 TYPE STANDARD TABLE OF ty_cawn1 INITIAL SIZE 0,
         wa_cawn1 TYPE ty_cawn1.
TYPES : BEGIN OF ty_cawnt1,
   pcs TYPE cawnt-atwtb,
    atinn TYPE cawnt-atinn,
    atzhl TYPE cawnt-atzhl,
    atwtb TYPE cawnt-atwtb,
      end of ty_cawnt1.
DATA : itab_cawnt1 TYPE TABLE OF ty_cawnt1,
         wa_cawnt1 TYPE ty_cawnt1.
TYPES : BEGIN OF ty_pcs1,
pcs TYPE cawnt-atwtb,
atwrt TYPE cawn-atwrt,
atwtb TYPE cawnt-atwtb,
    end of ty_pcs1.
DATA : itab_pcs3 TYPE TABLE OF ty_pcs1,
         itab_pcs4 TYPE TABLE OF ty_pcs1,
         wa_pcs1 TYPE ty_pcs1.
TYPES : BEGIN OF ty_pcsn,
matnr TYPE ausp-objek,
ebelp TYPE dynpread-stepl,
atwrt TYPE cawn-atwrt,
atwtb TYPE cawnt-atwtb,
END OF ty_pcsn.
DATA : itab_pcsn TYPE TABLE OF ty_pcsn,
         wa_pcsn TYPE ty_pcsn.
TYPES : BEGIN OF ty_ausp1,
     objek TYPE ausp-objek,
     atinn TYPE ausp-atinn,
     atwrt TYPE ausp-atwrt,
   END OF ty_ausp1.
DATA : itab_ausp1 TYPE STANDARD TABLE OF ty_ausp1 INITIAL SIZE 0,
         wa_ausp1   TYPE ty_ausp1.
DATA : param_name1(35) TYPE c.
DATA: progname1      TYPE sy-repid,
        dynnum1        TYPE sy-dynnr,
        dynpro_values1 TYPE TABLE OF dynpread,
        dynpro_values2 TYPE TABLE OF dynpread,
        field_value1   LIKE LINE OF dynpro_values1,
        ematn1         TYPE mara-matnr.
if sy-tcode ne 'ME23N' and sy-tcode ne 'ME23'. "psk
    clear : itab_cabn1,itab_cawn1,itab_cawnt1,itab_pcs3,itab_pcs4,itab_pcsn,itab_ausp1.
    clear : wa_cawn1,wa_cawnt1,wa_pcs1,wa_ausp1.
    if sy-uname eq 'IBM_ABAP'.
      param_name1 = '000000001'.
    else.
      param_name1 = '000000013'.
    endif.
    SELECT atnam
    FROM cabn
    INTO CORRESPONDING FIELDS OF TABLE itab_cabn1
    WHERE atinn = param_name1.
    select *
    FROM cawn
    into CORRESPONDING FIELDS OF TABLE itab_cawn1
    WHERE atinn = param_name1.
    if itab_cawn1[] is NOT INITIAL.
      SELECT atinn atzhl atwtb
      FROM cawnt
      INTo CORRESPONDING FIELDS OF TABLE itab_cawnt1
      FOR ALL ENTRIES IN itab_cawn1
      WHERE atinn = itab_cawn1-atinn
      AND atzhl = itab_cawn1-atzhl.
    endif.
    if itab_cawnt1[] is NOT INITIAL.
      sort itab_cawnt1 by atinn atzhl.
      loop at itab_cawnt1 INTO wa_cawnt1.
        READ TABLE itab_cawn1 INTO wa_cawn1 with key atinn = wa_cawnt1-atinn
                                                     atzhl = wa_cawnt1-atzhl BINARY SEARCH.
        if sy-subrc eq 0.
       CONCATENATE wa_cawn-atwrt '->' wa_cawnt-atwtb INTO wa_cawnt-pcs.
       MODIFY itab_cawnt FROM wa_cawnt TRANSPORTING pcs.
       wa_pcs-pcs = wa_cawnt-pcs.
          wa_pcs1-atwrt = wa_cawn1-atwrt.
          wa_pcs1-atwtb = wa_cawnt1-atwtb.
          append wa_pcs1 to itab_pcs3.
        ENDIF.
        CLEAR : wa_cawnt1,wa_cawn1, wa_pcs1.
      ENDLOOP.
    ENDIF.
    CLEAR: dynpro_values1, field_value1.
dynpro_values-FIELDNAME = 'MEPO1211-EMATN'.
APPEND dynpro_values.
    field_value1-fieldname = 'MEPO1211-ematn'.
    APPEND field_value1 TO dynpro_values1.
    progname1 = 'SAPLMEGUI'.
    dynnum1 = '1211'.
    CALL FUNCTION 'DYNP_VALUES_READ'
      EXPORTING
        DYNAME                               = progname1
        DYNUMB                               = dynnum1
TRANSLATE_TO_UPPER                   = ' '
     REQUEST                                = 'A'
PERFORM_CONVERSION_EXITS             = ' '
PERFORM_INPUT_CONVERSION             = ' '
DETERMINE_LOOP_INDEX                 = ' '
START_SEARCH_IN_CURRENT_SCREEN       = ' '
START_SEARCH_IN_MAIN_SCREEN          = ' '
START_SEARCH_IN_STACKED_SCREEN       = ' '
START_SEARCH_ON_SCR_STACKPOS         = ' '
SEARCH_OWN_SUBSCREENS_FIRST          = ' '
SEARCHPATH_OF_SUBSCREEN_AREAS        = ' '
      TABLES
        DYNPFIELDS                           = dynpro_values1
   EXCEPTIONS
     INVALID_ABAPWORKAREA                 = 1
     INVALID_DYNPROFIELD                  = 2
     INVALID_DYNPRONAME                   = 3
     INVALID_DYNPRONUMMER                 = 4
     INVALID_REQUEST                      = 5
     NO_FIELDDESCRIPTION                  = 6
     INVALID_PARAMETER                    = 7
     UNDEFIND_ERROR                       = 8
     DOUBLE_CONVERSION                    = 9
     STEPL_NOT_FOUND                      = 10
     OTHERS                               = 11
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
READ TABLE dynpro_values1 INTO field_value1 with KEY fieldname = 'MEPO1211-EMATN'.
    LOOP at dynpro_values1 INTO field_value1 WHERE fieldname = 'MEPO1211-EMATN'.
      clear ematn1.
      if sy-subrc eq 0.
        ematn1 = field_value1-fieldvalue.
      endif.
      if ematn1 is not INITIAL.
        clear : wa_cawn1,wa_cawnt1,wa_pcs1,wa_ausp1.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT = ematn1
          IMPORTING
            OUTPUT = ematn1.
        select *
        FROM ausp
        INTO CORRESPONDING FIELDS OF TABLE itab_ausp1
        WHERE objek = ematn1
        and atinn = param_name1.
        CLEAR itab_pcs4.
        if itab_ausp1[] is not INITIAL.
          sort itab_ausp1 by atinn atwrt.
          sort itab_cawn1 by atinn.
          READ TABLE itab_ausp1 INTO wa_ausp1 INDEX 1.
          loop at itab_cawn1 INTO wa_cawn1 WHERE atinn = wa_ausp1-atinn AND atwrt = wa_ausp1-atwrt.
            READ TABLE itab_cawnt1 INTO wa_cawnt1 WITH KEY atinn = wa_cawn1-atinn
                                                            atzhl = wa_cawn1-atzhl.
            if sy-subrc eq 0.
              wa_pcs1-atwrt = wa_cawn1-atwrt.
              wa_pcs1-atwtb = wa_cawnt1-atwtb.
              append wa_pcs1 to itab_pcs4.
              wa_pcsn-matnr = wa_ausp1-objek.
              wa_pcsn-ebelp = field_value1-stepl.
              wa_pcsn-atwrt = wa_cawn1-atwrt.
              wa_pcsn-atwtb = wa_cawnt1-atwtb.
              APPEND wa_pcsn to itab_pcsn.
            ENDIF.
            clear : wa_ausp1,wa_cawn1,wa_cawnt1.
          ENDLOOP.
        ENDIF.
       clear wa_pcs1.
       read TABLE itab_pcs4 into wa_pcs1 index 1.
       if sy-subrc eq 0.
         EKPO_CI-ZPCS = wa_pcs1-atwrt.
       endif.
      ENDIF.
    ENDLOOP.
    CLEAR: field_value1.
    LOOP at dynpro_values1 INTO field_value1 WHERE fieldname = 'MEPO1211-EMATN'.
      clear wa_pcsn.
      if field_value1-fieldvalue is not INITIAL.
        read TABLE itab_pcsn INTO wa_pcsn with key matnr = field_value1-fieldvalue
                                                    ebelp = field_value1-stepl.
        if sy-subrc eq 0.
          clear EKPO_CI-ZPCS.
*EKPO_CI-ZPCS = wa_pcs1-atwrt.
          EKPO_CI-ZPCS = wa_pcsn-atwrt.
        endif.
      endif.
    ENDLOOP.
   CLEAR: field_value1, dynpro_values1.
   progname1 = 'SAPLXM06'.
   dynnum1   = '0111'.
   field_value1-fieldname = 'EKPO_CI-ZPCS'.
   APPEND field_value1 TO dynpro_values1.
   if ematn1 is not INITIAL.
     clear wa_pcs1.
     read TABLE itab_pcs4 into wa_pcs1 index 1.
     if sy-subrc eq 0.
       EKPO_CI-ZPCS = wa_pcs1-atwrt.
     endif.
   ENDIF.
endif.
ENDMODULE.                 " STATUS_0111 OUTPUT
Function exits:
^^^^^^^^^^^^^^^^^
EXIT_SAPMM06E_016
^^^^^^^^^^^^^^^^^
INCLUDE ZXM06U41 .
DATA XFISTL LIKE EKPO-FISTL.
TABLES: ADRC, T001W.
DATA: PLANT LIKE T001W-WERKS.
SELECT SINGLE * FROM T001W WHERE WERKS = I_EKPO-WERKS.
SELECT SINGLE * FROM ADRC WHERE ADDRNUMBER = T001W-ADRNR.
XFISTL = ADRC-SORT2.
SET PARAMETER ID 'FIS' FIELD XFISTL.
* Added For PCS 12.11.2010
DATA : fs_ekpo type EKPO_CI.
if sy-tcode = 'ME22N' or sy-tcode = 'ME23N'.
*  if tekpo-zpcs is INITIAL.
*    message e000(zmm) with 'PCS Type should be chosen'.
*  endif.
  loop at tekpo.
    if ( tekpo-ebeln eq i_ekpo-ebeln and tekpo-ebelp eq i_ekpo-ebelp ).
      ekpo_ci-zpcs = tekpo-zpcs.
    endif.
  ENDLOOP.
endif.
^^^^^^^^^^^^^^^^^
EXIT_SAPMM06E_018
^^^^^^^^^^^^^^^^^
INCLUDE ZXM06U40 .
E_CI_EKPO-ZPCS = EKPO_CI-ZPCS.
E_CI_UPDATE = 'X'.

Restrict system from doing re-confirmation of all line items in SO

Hello SDNs,
When we change the quantity of one line item, system is going for re-confirmation of all line items.
when there are multiple line items, it is having perfomance problem. Now we want to change this to go for re-confirmation of only the changed line item. Please suggest me how to move ahead.
Regards
Hari

Hi,
what you are willing to implement is not a supported functionality in the current Yard management.
If this is not yet the case, I would encourage you to open a SAP Customer message so that your question gets checked and analysed at development support.
BR
Alain

Printing In Main Window in Smartform After All Line Items

Similar Messages

Maybe you are looking for