Printing in Snow Leopard

Although Snow Leopard automatically finds drivers for existing printers, the Gutenprint drivers deliver very slow and poor performance.
By downloading the latest printer drivers (for HP printers which I use) from HP which ran in Leopard (os 10.5) I was able to "add" the printers and reinstall the drivers. It prompted me for Rosetta which automatically installed when I said OK.
Full printer functionality is now available with the custom print routines I had previously set up.

Hi,
This is also possible fix. If you've installed HP drivers and applications before, uninstalled them using HP Uninstaller. Then run the installer again, and ONLY install the Printer Driver option, and do not install the applications (Photoworks, etc.).
I got mine to work again even though it's not in the SL's out of the box supported printer list. My printer is HP D1560.
Hindra

Similar Messages

  • IMac 3.06 GHz Intel cannot print in Snow Leopard in Text Edit or CS4

    iMac/3.06 GHz Intel Core 2 Duo/OSX.6/4gigRAM/1TerabyteHD/CS4 Design Premium/ cheap HP Deskjet D1520 Printer.
    I have installed the HP Drivers from the original SnowLeopard install of the iMac, yesterday.
    I have downloaded and installed from Apple the HP Drivers for Snow Leopard.
    I have downloaded and installed from Apple the HP Drivers for Leopard.
    I have rebooted endlessly.
    No drivers appear in printer set-up except for my Epson Perfection 1260 Photo Scanner.
    Using HP Printer Utility does not recognize any print drivers I have installed in the past two days.
    I tried using CUPS from the free source group and this printer is not supported in their list.
    My printer worked perfectly in Leopard for printing receipts and memos.
    Help!!!!!!!!!!!!!!!!!!!!!!!
    John R

    Now it's been two weeks since I brought home a 27" iMac and realized that the iMac will not SEE my HP D1520 Deskjet printer any longer.
    HP emphatically states that their website driver ffor my printer and for Snow Leopard works in their labs.
    Apple emphatically states that the required driver for my HP printer is within the Snow Leopard installer.
    And neither vendor will tell me why after repeated installs and uninstalls, and reboots, and permission/disk repair, changing USB cables out, WHY SNOW LEOPARD WILL NOT SEE MY PRINTER, but clearly sees my scanner and an Acrobat driver.
    I had another unfortunate soul who's printer is unrecognizable by Snow Leopard to tell me they bought a new printer, and Snow Leopard saw the brand new printer. That's amazing, as my printer is less than a year old. So I guess I have to gamble and buy a new printer because apple upgrades the system and I can't install Leopard which worked perfectly with my printer.
    Apple, you let me down, this time.

  • Why won't Lexmark T430 printer with Snow Leopard?

    Lexmark T430 will not printer with Snow Leopard. Error Message: “The printer software was installed incorrectly. Please reinstall the printer’s software or contact the manufacturer for assistance.”
    The printer is connected via Ethernet from an iMac; I have an airport wireless network. Oddly, I can print wirelessly from my MacBook Pro, but not from my desktop iMac. Both computers were upgraded to Snow Leopard at the same time, but only the iMac refuses to print.
    Tried:
    -Reset printing system
    -Downloaded Lexmark drivers and reinstalled them
    -Connected printer directly to iMac instead of through the Ethernet switch
    -Repaired disk permissions
    When ‘adding printer’ the Lexmark is recognized and configured, but it only results in the same tired error message.
    Suggestions will be appreciated.

    Hi,
    A follow up on my previous report.
    I installed 10.6 on an external USB drive and booted my iMac from there. Result: was able to print successfully to the T430, both via Ethernet and via USB cables. Previously, I also tried to print from the iMac (booted from the internal drive) via USB and that failed; although, as I said, I was able to print to a Canon printer. I conclude that there must be some conflict between the Lexmark drivers and something on my internal iMac hard drive.
    H

  • Epson C88 Won't Print with Snow Leopard

    C88 won't print using Snow Leopard. Downloaded driver from Epson doesn't help.????

    Like you, I'm working with an Epson C-88+. Happy with this situation, would not be exactly accurate. I have tried some different approaches, including the ones from John and Kappy. They would work just fine for about 3 days, then fail. I even went back to the Snow Leopard Install DVD/ Optional Installs/ Options.MPKG/ Printer Support and made a choice. I then went to Disk First Aid and everything was fine. Today, I went to print 1 envelope, total dismal failure. I then downloaded the EPSON Printer Drivers 2.1, I proceeded to install the drivers. Did anybody notice, this was an Apple License, not an EPSON License? Therefore, there are no assurances, that these print drivers are in fact, EPSON. Therefore, AppleCare should be required to support these Print Drivers as Apple Licensed Products. But equally so, we as 'dumb endusers' must try to work with AppleCare to solve this issue. To "pete.purvis" John and Kappy, sorry, you guys have proven yourselves to be out of the "dumb endusers group, I just want to say, THANK YOU!

  • HP Laserjet 4100 will not print in Snow Leopard

    Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
    My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
    I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
    I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
    Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
    Any suggestions?
    Chuck Stewart
    < Edited by Host >

    Well, another week has gone by without a solution.
    Again, here is the problem:
    I have a 24" iMac connected to a USB hub and an AT&T 2-Wire DSL/ethernet hub. When I upgraded to Snow Leopard 10.6.1 and now the update 10.6.2, the two printers on the USB hub work fine but the HP Laserjet 4100dtn does not print. This old printer has only ethernet or serial ports. I've downloaded and installed the HP driver updates from Apple and HP to no avail. According to HP, I must add the 4100 manually using its IP. I've followed the instructions while adding a printer to select IP- HP Jetdirect - Socket. The address of the printer is 10.0.1.100. When I type this in, the window says that this is a valid and complete address. It searches and then says the "Print Using:" is a Generic PostScript Printer. The driver for this printer, I believe, should be "HP LaserJet 4100 Series v.3010.107" Regardless, when I click Add the window "Determining Installable Options" shows "Status: Connecting to printer..." It never establishes a connection.
    The 2-Wire DSL/Ethernet Hub/Modem, has an IP of 192.1687.1.66, Submask 255.255.255.0 and Router (DNS) 192.168.1.254.
    If I plug the ethernet cable directly from the printer to the iMac, the supply level shows correctly but will not print. If I plug the ethernet cable from the printer to the 2-Wire and then to the iMac, it neither shows supply level nor prints.
    Any suggestion as to how to fix this problem? (I've been on the phone with 3 different Apple respresentatives and 1 HP representative with no success.)

  • Problem with HP 2100 printer under Snow Leopard

    I am sorry for me bad english..........I have HP 2100 TN and I have very big problem always. I was try various solutions form net- from direct HP web page - http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01844302 and from another users also - for example from this : http://www.mariasguides.com/2009/09/03/using-an-hp-laserjet-2100tn-with-snow-leo pard/
    But none solution is not function in me comp. I am desperate..... Al another printers in me home are without problems, but this HP 2100 not. I find any working solutions 2 days, I was try reinstall all, but not,not,not ..... Can you help me any ? Or I will be must buy any another printer ?........Thank you in advance. ([email protected])

    Jirka,
    First, don't worry about your English, its good enough for me to understand what is wrong. Most likely the problem is what hamiller described, but let me try to expand on it.
    Apple dropped support for AppleTalk in Snow Leopard. That means the mechanism you were using to discover and setup your printer no longer works under 10.6. What you need to do is find out the IP address of your LaserJet 2100TN and add the printer queue directly using HP JetDirect - Socket. That option shows up under the IP button in Add Printer.
    In order to find out the IP address of your printer, the easiest thing to do is print the Self Test Page (Simultaneously press GO and JOB CANCEL). If the Self Test page doesn't give you an IP address, now you're off in the weeds of JetDirect land. Specifically your printer includes printer an EIO Slot for HP JetDirect 600 N print servers. I really don't know much about them, but if you are still having problems post back here and I'll try to find somebody that does.
    And note, that if the IP address in your printer makes no sense to the router you are currently connected to, just because you have the IP address, the printer still won't print. In any event if you can't get things working, please also post the IP address the Printer thinks it has.
    Just trying to help.
    Andrew

  • Font errors in some fonts (missing "o") only when printing. Snow Leopard.

    In a couple of fonts I use most commonly, the letter "o" (lower case o), does not print. A space appears when the letter should be. It displays fine on the screen. In a QuickView of the font file, the letter is also missing. This just started after I upgraded to Snow Leopard.
    1. What is causing this?
    2. How can I fix it?
    3. Is there a good application that will let me see in innards of the font in detail?
    4. How could the display differ from the printed version?
    More info:
    These fonts were originally purchase a long time ago (about 15 years ago) from Adobe. They are Berkeley and InterState.
    The problem occurs in all variations of the fonts.
    I have 100s of fonts; so far only these two are affected, but I haven't been able to look at every other font.

    What I don't understand is 1) why these fonts worked in Leopard but not Snow Leopard and 2) why these particular fonts.
    If you search you will find a large number of posts in these forums about changes in Snow Leopard related to fonts, e.g.
    http://discussions.apple.com/thread.jspa?threadID=2154431&start=0&tstart=0

  • Getting a Sharp AR-405 with AR-PB2A to print from Snow Leopard

    I made this work, and thought I'd share (after not being able to, and going over these boards).
    Maybe I can help someone else...
    Backstory: This is $12,000 printer circa 1999/2000, and not so easily replaced off the shelf! The AR-PB2A is a networking box attached to the machine that allows it to use several protocols, and adds features. It has a parallel port as well.
    I'd gotten a new MBP 2 months ago with OSX 10.5.6 (to start the move from OS9) and thought I'd die when it wouldn't print (but the gimp folks helped out). Sharp no longer supports this model, and judging by the printer list from Apple, they don't support this OS either. Last week, we added an imac, which came pre-loaded with Snow Leopard.
    Imagine my horror on the "no appletalk" issue!
    Long-term, printer-sharing isn't going to cut it. This printer may outlast a few system revisions yet.
    After many restarts, and crashing the printer dozens of times, here's what works.
    All you need is a PPD file that works from an earlier system.
    This works for both 10.5.8--10.6.1 ... it may work on earlier OS X versions. It may help for other Sharp AR series printers of this vintage.
    1. Go to the printer interface, and set the printer's IP number if it hasn't already been set. Refer to the AR-PB2A manual if you need to figure out how to get to the right panel and what I type below makes no sense:
    A.If the printer is online, toggle the button to OFFLINE.Click the "MENU" button on the lower right. Navigate to TCP/IP settings.
    B.Make sure the printer's IP number is set to your LAN network (ie 192.168.1.xx)
    Pick that last number to be one not already used on your network/LAN.
    C.Subnet Mask : 255.255.255.0
    D.**Default Gateway: 192.168.1.1
    E.Close the settings panels, and shut off the printer and let it sit a couple minutes, then restart.
    ** -ROUTER address actually. Not being a network guru, this alternative terminology stumped me for awhile
    2.Print a NIC page (startup page with the network info on it). If it doesn't auto-print one on startup, go into the printer's panels and either set it to print or tell it to do so now. (Default PW for the "key operator" thing in case you're interested is 00000. If it's been changed, you'll need to know what it was changed to.)
    My printer was never set to be on TCP/IP network, we only recently were able to migrate to DSL, router etc. (We left the appletalk settings intact, and the appletalk-capable machines still print to it fine.)
    3. When the machine is up and running again, try to access it with a web browser. Just type in the IP # of the machine into your browser. It should bring up a web page. If not, check the IP to be sure it's correct. This will help verify that the printer is accessible.
    If you are successful, you'll be presented with some settings pages. Here you can poke around and see all what you can change (including the IP#).
    4. HERE'S THE IMPORTANT PART:
    The default PORT is 10001. CUPS wants to default to port 631. You can't set this printer's port to 631 (but you can set it between 10001 and 6xxxx). Just leave it. This port number will be shown at the bottom of the NIC printout page, under
    "TCP/IP Connection Information
    Port Number : 10001"
    If you need or wish to change any settings via the web access pages, you'll need a PW. For this particular model, default is "sysadm". There is no place to input a user name, so other "default Sharp" pw's don't work Although, they may work for other sharp models.
    5. Now the big fun:
    System Prefs > Printers & Fax > click the + to add a new printer
    Click the IP printer button at the top.
    Drop down menu has three options:
    Line Printer Daemon
    Internet Printing Protocol
    HP DirectJet - Socket
    Select HP DIRECTJET-SOCKET
    (the other two crashed my printer every time, causing it to be shut off and sometimes the settings completely redone)
    In the first line, type in the IP of the printer followed with the port--
    Here's my own example:
    192.168.1.195:10001
    If the port number is not there, it will not print.
    (be sure to match the IP number to your network and what you set the printer to)
    Leave the next line Blank.
    The 3rd line down (Printer Name) starts out with the basic IP number. Give this printer a sensible name here.
    Location line: Name it or leave it blank
    Drop down menu at the bottom, go look for your PPD file. (if you can't find it now, you can reset it later). It should default to "Generic..."
    This will bring up a dialog with a progress bar, you can wait for that to finish or click configure. Set the printer's options regarding memory, trays, duplex module etc.
    Click "Add" at the bottom of the panel.
    The printer should now show up in your Printers & Fax panel, and be available.
    Try a test print.
    Notes: I can't figure out how to rename a printer once it's been set up. If you don't set the name when you add the printer, you won't be able to later (although the unix folks might know the way around that). Otherwise, you'll end up with the IP# as the printer name. If you don't like this, delete and set it up again (naming the printer).
    Presently, on this 10.5.8 machine, I have this printer set up to print via AppleTalk and as an IP printer (both are listed printers now). I can print to either one from this machine. But only the IP printer version (via HP JetDirect-Socket) works on the 10.6 machine.
    I write this in hopes it helps someone else in some way. Maybe you too can save 10 hours, when it can be done in about 10 minutes (less if your printer is actually in the same room as your computer!) Who knew that "HP JetDirect" would work when the other two more "obvious" choices for a Sharp printer would crash it? Ha!
    Now, we're off to get some ancient Epson LQ-570+ online. We've managed to get one to work on 10.5.8 ... and therefore, we are hopeful! Anyone remember PowerPrint LT and the dongles?? Mwah ha ha ha... yes the insanity continues....
    --Ky

    I made this work, and thought I'd share (after not being able to, and going over these boards).
    Maybe I can help someone else...
    Backstory: This is $12,000 printer circa 1999/2000, and not so easily replaced off the shelf! The AR-PB2A is a networking box attached to the machine that allows it to use several protocols, and adds features. It has a parallel port as well.
    I'd gotten a new MBP 2 months ago with OSX 10.5.6 (to start the move from OS9) and thought I'd die when it wouldn't print (but the gimp folks helped out). Sharp no longer supports this model, and judging by the printer list from Apple, they don't support this OS either. Last week, we added an imac, which came pre-loaded with Snow Leopard.
    Imagine my horror on the "no appletalk" issue!
    Long-term, printer-sharing isn't going to cut it. This printer may outlast a few system revisions yet.
    After many restarts, and crashing the printer dozens of times, here's what works.
    All you need is a PPD file that works from an earlier system.
    This works for both 10.5.8--10.6.1 ... it may work on earlier OS X versions. It may help for other Sharp AR series printers of this vintage.
    1. Go to the printer interface, and set the printer's IP number if it hasn't already been set. Refer to the AR-PB2A manual if you need to figure out how to get to the right panel and what I type below makes no sense:
    A.If the printer is online, toggle the button to OFFLINE.Click the "MENU" button on the lower right. Navigate to TCP/IP settings.
    B.Make sure the printer's IP number is set to your LAN network (ie 192.168.1.xx)
    Pick that last number to be one not already used on your network/LAN.
    C.Subnet Mask : 255.255.255.0
    D.**Default Gateway: 192.168.1.1
    E.Close the settings panels, and shut off the printer and let it sit a couple minutes, then restart.
    ** -ROUTER address actually. Not being a network guru, this alternative terminology stumped me for awhile
    2.Print a NIC page (startup page with the network info on it). If it doesn't auto-print one on startup, go into the printer's panels and either set it to print or tell it to do so now. (Default PW for the "key operator" thing in case you're interested is 00000. If it's been changed, you'll need to know what it was changed to.)
    My printer was never set to be on TCP/IP network, we only recently were able to migrate to DSL, router etc. (We left the appletalk settings intact, and the appletalk-capable machines still print to it fine.)
    3. When the machine is up and running again, try to access it with a web browser. Just type in the IP # of the machine into your browser. It should bring up a web page. If not, check the IP to be sure it's correct. This will help verify that the printer is accessible.
    If you are successful, you'll be presented with some settings pages. Here you can poke around and see all what you can change (including the IP#).
    4. HERE'S THE IMPORTANT PART:
    The default PORT is 10001. CUPS wants to default to port 631. You can't set this printer's port to 631 (but you can set it between 10001 and 6xxxx). Just leave it. This port number will be shown at the bottom of the NIC printout page, under
    "TCP/IP Connection Information
    Port Number : 10001"
    If you need or wish to change any settings via the web access pages, you'll need a PW. For this particular model, default is "sysadm". There is no place to input a user name, so other "default Sharp" pw's don't work Although, they may work for other sharp models.
    5. Now the big fun:
    System Prefs > Printers & Fax > click the + to add a new printer
    Click the IP printer button at the top.
    Drop down menu has three options:
    Line Printer Daemon
    Internet Printing Protocol
    HP DirectJet - Socket
    Select HP DIRECTJET-SOCKET
    (the other two crashed my printer every time, causing it to be shut off and sometimes the settings completely redone)
    In the first line, type in the IP of the printer followed with the port--
    Here's my own example:
    192.168.1.195:10001
    If the port number is not there, it will not print.
    (be sure to match the IP number to your network and what you set the printer to)
    Leave the next line Blank.
    The 3rd line down (Printer Name) starts out with the basic IP number. Give this printer a sensible name here.
    Location line: Name it or leave it blank
    Drop down menu at the bottom, go look for your PPD file. (if you can't find it now, you can reset it later). It should default to "Generic..."
    This will bring up a dialog with a progress bar, you can wait for that to finish or click configure. Set the printer's options regarding memory, trays, duplex module etc.
    Click "Add" at the bottom of the panel.
    The printer should now show up in your Printers & Fax panel, and be available.
    Try a test print.
    Notes: I can't figure out how to rename a printer once it's been set up. If you don't set the name when you add the printer, you won't be able to later (although the unix folks might know the way around that). Otherwise, you'll end up with the IP# as the printer name. If you don't like this, delete and set it up again (naming the printer).
    Presently, on this 10.5.8 machine, I have this printer set up to print via AppleTalk and as an IP printer (both are listed printers now). I can print to either one from this machine. But only the IP printer version (via HP JetDirect-Socket) works on the 10.6 machine.
    I write this in hopes it helps someone else in some way. Maybe you too can save 10 hours, when it can be done in about 10 minutes (less if your printer is actually in the same room as your computer!) Who knew that "HP JetDirect" would work when the other two more "obvious" choices for a Sharp printer would crash it? Ha!
    Now, we're off to get some ancient Epson LQ-570+ online. We've managed to get one to work on 10.5.8 ... and therefore, we are hopeful! Anyone remember PowerPrint LT and the dongles?? Mwah ha ha ha... yes the insanity continues....
    --Ky

  • Can't Print After Snow Leopard Upgrade

    I have a home network centered around an Apple Airport Extreme Base Station. The base station is wired to a Linksys network switch which, in turn, is wired to two computers - an Apple Dual G5 running OS X 10.4.11 and a and Mac MIni which, until yesterday was running Leopard. I have an HP Laserjet P1006 connected to the USB port of the AEBS and, until yesterday, everything worked fine. Yesterday, I ran the Snow Leopard Upgrade on my Mini and now the Mini won't print to the HP over the network. If I connect the printer directly to the MIni, it works fine; as soon as I reconnect the printer to the AEBS, the Mini will no longer print. The lights on the printer will flash but nothing comes out. I have downloaded the HP Printer driver update from Apple but this didn't help. I have reset the AEBS, to no avail. The G5 running Tiger has no problems with printing. And, my daughter just got a brand-new MacBook Pro loaded with Snow Leopard from the factory and she can print to the HP over the network without any problems.
    Any ideas?

    When I upgraded iMac from Leopard to Snow Leopard 10.6 it also stopped printing wirelessly to Brother MFC6490CW.
    I thought I had this same issue with my Epson printer when wireless printing. Actually, in SL, wireless printing is very slow at least with an Epson. Takes about 5 minutes or so for wireless print to even start. When checking the printing status app, it will start out saying "printer ready." Then after a few minutes it will say "looking for printer." A few minutes later it will say "printing."
    When I go into the next room where the printer is, the green light is "flashing" letting me know that "printing" has started.
    So I guess what I am trying to say is to check the printing status app after you click "print." It's possible "Brother" is just as slow as "Epson."
    Message was edited by: CMCSK

  • ICal and Address book will not print using Snow Leopard

    I have had several issues resulting in my having to re-install Snow Leopard several times. Currently all the issues are resolved, but now I have a new issue. The printer and PDF functions will not work. I dread having to reinstall Snow Leopard AGAIN. What is the deal?

    This issue was resolved, thanks to a call to Apple Care support. Simply uninstalling and then reinstalling the printer driver fixed the problem. This may be necessary after another printer driver update.

  • Epson RX595 will not print since Snow Leopard install

    I cannot get my trusty Epson to print since installing Snow Leopard and latest printer drivers.
    I can scan. Just cannot print.
    I have looked at some troubleshooting support articles. Does anyone have a good link, tip?
    Thanks in advance for any help with this!

    Try deleting the printer, the <hard drive>/Library/Printers/EPSON folder and the /Library/Caches/Epson folder, and then reinstalling the drivers using Software Update. Then add the printer, making sure that you are using the Epson driver, not the Gutenprint driver.

  • HP Laserjet 3015 won't print after Snow Leopard

    Ok, so I upgraded to Snow Leopard, and now I can't print anything on my Laserjet 3015. I've tried uninstalling the printer and then reinstalling it, but still nothing. It seems that any time I try to print it says the printer is "paused". If I press the "resume printer" button while the document is in cue, it doesn't resume the printing. If I delete the document and then press the "resume printer" button it shows that the printer goes back into a ready state. Any suggestions? Thanks!

    Both SL and HP have recently updated their software. Have you upgraded to SL 10.6.1 and the latest version of HP drivers?

  • HP Laserjet 4mp won't print with Snow Leopard

    My great Laserjet 4mp prints just fine with OS 10.5.8 but not with Snow Leopard (10.6.2) on my new iMac. Have spent three plus hours with senior level Mac Techs to no avail. The printer screen shows the correct printer and driver and indicating valid connection, but when attempting to print I get the message "Unable to print, try again in 30 secs". Since 10.6 doesn't have Appletalk, am unable to use it; techs have tried to use the 4mp driver supplied with Snow Leopard and also downloaded it separately from the web site. We (they) have also tried using all methods (IP, Daemon, and HP Jet Direct using Ethernet and Serial to USB connections). Techs have talked with HP techs and have no other solutions. The security system is off. Any suggestions are welcome! Thanks!

    I've read the threads and don't understand some, but I think we (the Apple support techs and I) have tried the ones I recognize. One new idea--in a reply to a similar post someone mentioned being sure to use additional data when using the IP address-- submask address or some such, I
    haven't been told to do this--should I? (I can get it from the printer readout if told what to get.) Also, in another post someone suggested deleting the OS 10.5.8 driver that was transferred when all the data from my old iMac G5 was moved over, saying that it would interfere. If true, how do I do that?
    What I really need is a stepwise instruction on which connection to use (Ethernet, Serial to USB, or parallel port are the only options); which protocol to use (IPP, Line Printer Daemon, or HP Jet Direct socket, whatever they are); what to put in the Address line (the IP address is the one used by Apple techs); what to put in the Queue line (techs said to leave it blank); what to put in Name and Location blocks, if anything; and what to put in the Print Using line (techs have unsuccessfully tried Autoselect, Generic, and the HP4mp driver selected both from the Select Printer Driver option and from the driver downloaded directly from the HP web site).
    I'd be grateful for this help or even advice on where I can get it! (With this new computer I still have free telelphonic Apple tech support but they've given up.) Thanks!

  • GCC Elite XL 40 - Will Not Print in Snow Leopard

    I am desperate I have wasted two days working with GCC tech support via phone and email and have followed their instructions for setting up my GCC Elite XL 40 as an IP printer for our MacPro running Mac OS 10.6.5. I have checked and double and triple checked the many settings on both the printer and my MacPro - ALL are correct (according to the instructions provided) but the printer will not Print. It is recognized by the computer — got a green light on my print queue — says its ready to print but nothing happens.
    I have redone this so many times I - added, deleted and re-added the printer several times - I am just on the verge of giving up but I need this large format laser printer to work with this computer — it's our workhorse for big projects.
    There was a Posting here from someone named Rocky dated a few months ago and that information conformed to what I have been instructed to do by GCC but it still does not work. All other Macs on our network are printing to the GCC Elite XL 40 just fine as usual. This is the only workstation we upgraded to Snow Leopard plus this computer is hard wired via Ethernet not Airport.
    If there is anyone out there that has made this work please send me some info or direct me to an expert. Thank you.

    Looking at the specifications for this printer it shows that the unit support Postscript Level 2, which indicates it's quite an old model. This could be causing problems with Snow Leopard.
    The specs also show the printer supports PCL5e and PCL6. So did the GCC techs get you to try creating a printer queue using the Generic PCL Laser Printer? If not it would be worth a try. Make a new print queue using IP > LPD for the protocol, not sure if you need a queue name so leave this blank, and select Generic PCL Laser in the Print Using menu. This Generic driver gives you no options and probably no support for the larger paper sizes but it will let you see if you can get a print job from your Mac to the printer.

  • Quark 7.5 Will Not Print In Snow Leopard

    I've been running my networked G5 (OS 10.4.11) for years with no problems using Quark, PhotoShop, Illustrator, etc. I recently bought a new iMac (OS 10.6.2) and migrated the G5 files to iMac. Worked through a few bugs and adjustments, however QuarkXpress documents will not print to my printers (Xerox Phaser 5400 and Lexmark C540). I can print simple Quark documents (text only), but as soon as I try any complex documents, the job spools to the Phaser and then is cancelled. On the Lexmark an error of "900 Firmware Error" appears. All other applications, ie, InDesign, Photoshop, Illustrator, Acrobat and various other applications print fine to both printers. Obviously it's an issue with the Quark software, but I haven't been able to resolve. Any insights?

    Yes, I can create PS or PDF files for print, but would prefer not to do a workaround. I would call Quark but I've seen their posts indicating they do not support QX7.5 in the Snow Leopard environment. Also I've seen other posts regarding QX printing problems and Quark advised upgrading to 8, which didn't seem to resolve most of the printing problems I've read about... thank you for the suggestion.

  • Brother MFC 9700 and Canon i960 will not print under Snow Leopard

    After checking the compatibility documentation which indicated that the above printers had drivers which would work w/Snow Leopard, I upgraded to10.6. Now neither printer will work i.e. the document goes into the print queue but won't print. I've unplugged/disconnected the printers and re-installed the drivers from the respective manufacturers web pages. I've checked the forum and couldn't find any info. I would appreciate any suggestions.

    Hello Scott.
    I suggest you try resetting the printing system, if you haven't done so already.
    *How to Reset the Printing System*
    1. Open System Preferences > Print & Fax
    2. Move your mouse over the Printers list
    3. Hold down the Control button and click the mouse (or right click if supported).
    4. Click "Reset printing system ..."
    5. Restart your Mac
    This will remove your printer queues but not your printers drivers. So you will need to add your printer queues again.

Maybe you are looking for