Printing JE automatically when it is added!

Hi All,
Is it possible to print JE automatically when it is added by one user but not by another user.
Is this settings are user specific?
SV REddy

Hi SV.......
Go to Administration> Setup> General> User Default> Print--> Select Journal Entry and tick on while add document.
Then open the user window for which you want to set this and link this User defaults there in user. Once you do this the momet you add the document it will print JE automatically......
Regards,
Rahul

Similar Messages

Printer Canon i865 to start automatically when printing

I use my i865 via usb with Turboprint/CUPS. How do I manage to start the printer automatically when sending a print job to print queue? Any ideas?

Okay, I solved the problem. Qemu, a WinXP installation and the canon driver installation were included on my way to success. I'm exhausted but happy... ;-)

Hp 6310 all in one printer keeps automatically uninstalling

HP 6310 All-in-one printer purchased in 2008.
The printer keeps automatically uninstalling itself.
1. I have tried everything including downloading drivers.
2. I have completely uninstalled and reinstalled from disc. It still keeps happening.
3. I have tried leaving the computer and printer on over night so that the setup does not change. No it still happens.
4. Even when I do get it printing. It can print of some pages. The after some pages it decides that it and the printer has again uninstalled.
5. It can take hours to get the printer to work. Installing, switching the printer on and off. Even when the printer is set up and states its all ok. The printer won't work. Well sometimes it might but mostly not.
HELP.
Vi

Hello @Vipro9 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing printer driver issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Also, do you have the same issue making a copy as opposed to a print?
Good luck and please let me know the results of your findings. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

In AP invoice i need to make "Terms date " field to calculate the date automatically when i select the payment terms

In AP invoice i need to make "Terms date " field to calculate the date automatically when i select the payment terms.
How can i do this?

Hi,
You can select the Payment Term at PO Header Level.
When you book an invoice, that Payment Term will automatically defaulted to Invoice.
You can define Payment Term in AP.
Payment terms have one or more payment terms lines, each of which creates one scheduled payment. Each payment terms line and each corresponding scheduled payment has a due date or a discount date based on either a specific day of a month, such as the 15th of the month, or a number of days added to your terms date, such as 14 days after the terms date.
Payment Terms (Oracle Payables Help)

Columns "Max Pr Pts" and "Pt Min Prc" not coming automatically when we enter condition type 0LM1

Hi,
In the product master data COMMPR01, If we search any sales product and in condition tabs , when we give condition types 0LM1 in conditions, Max Pr Pts and Pr Min Prc columns are not getting added automatically as displayed below(The screen shot was taken in the another where it is working)
Could you help us to find how these two columns comes automatically when enter the condition 0LM1 in the product under condition tab.
System Details : QD3/504
Best Regards,
Manmohan

Hi Manmohan,
For Loyalty related functionalities, please use the Set Type - REWARD_PRO_LOY to the product categoty.
Details are given in SAP note:1331970.
Regards,
Srinivas

How do I make the plugin run automatically when a photo is imported?

I am trying to write a new plugin where the metadata will be automatically added to the photo when I import the photo in the Lightroom.
How do I make the plugin run automatically when a photo is imported?
Thanks for your help!
Regards,
Prosenjit

psaha84 wrote:
What I want is, when I import a photo in Lightroom the plugin will run and assign the metadata.
As John said, there is no mechanism to receive notification of import. The likely recourse is continuous polling (unless you get very creative..).
You can try optimizing. e.g.: every second (or less), see if the count has changed, if it's gone up, something's been imported, if not then probably not (check anyway once in a while..).
psaha84 wrote:
How do I save the custom metadata with the image file?
Lightroom 5 has the limitation, plugin cannot link the custom metadata fields to XMP file or save them with image file.
So, is there any alternative way to save the custom metadata?
Yeah: Lightroom won't save custom metadata in xmp, nor read it if it's there, so you are pretty much on your own - you can save in a file, but if you save as non-standard sidecar Lr won't attend to it like it will jpg or xmp sidecar. For that reason it's often better to save in a separate dedicated location. You can save in image file itself, e.g. using exiftool if raw file, but that would make me nervous, and of course you'd have to have the logic to read it somewhere too..
Good luck,
Rob

System-config-printer-gnome freezes when trying to "Add" a printer

I have the same issue that was discussed in the thread system-config-printer-gnome utility freezes when "adding" printer. Specifically, when I try to add a printer using system-config-printer gui, the window freezes and throws back the following code:
mechoid9@ordinateur:~$ system-config-printer
Traceback (most recent call last):
File "/usr/share/system-config-printer/asyncipp.py", line 196, in send_reply
handler (self._conn, result)
File "/usr/share/system-config-printer/asyncpk1.py", line 143, in _ipp_reply_handler
self._client_reply_handler (self._conn, *args)
File "/usr/share/system-config-printer/asyncconn.py", line 142, in <lambda>
kwds["reply_handler"] = lambda c, r: reply_handler (self, r)
File "/usr/lib/python2.7/site-packages/cupshelpers/cupshelpers.py", line 582, in _reply_handler
self._client_reply_handler (connection, devices)
File "/usr/share/system-config-printer/system-config-printer.py", line 4845, in <lambda>
current_uri))
File "/usr/share/system-config-printer/system-config-printer.py", line 4881, in local_devices_reply
self.add_devices (result, current_uri)
File "/usr/share/system-config-printer/system-config-printer.py", line 5228, in add_devices
physdev = model.get_value (iter, 1)
TypeError: iter must be a GtkTreeIter
The solution mentioned was to use the CUPS web interface. This lets me add a printer (which is part of the solution), this is not the complete solution. I've used the utility before, and I'm comfortable with it, and I think that I should be able to use the gnome utility to add the printer if everything on my system is up to date (which it is, as of this posting). I would like to know why it doesn't work anymore (and I'm of the impression that it has something to do with how I've installed python on my system).
I've googled the issue, and perhaps I didn't look around thoroughly enough, but I couldn't find a solution. So if somebody knows where to look I'd be glad to look there.

I have the same problem. I noticed that it occured only after installing the following driver packages.
hpoj-0.91-16 hplip-3.11.3-1 net-snmp-5.6.1-1 foomatic-db-engine-4.0.6_20101215-1 foomatic-db-4.0.6_20101215-1
I did a workaround by installing the printer using the webinterface, removing the drivers again, setting the samba login details and then reinstalling the drivers.
But this problem should really be fixed.

Office jet 6700 printer jam error when there is no printer jam

I get a continuous printer jam error when there is no jam present. I have tried connecting and reconnecting. Same error.

Hi @lbrockhurst
Although you are not experiencing a true paper jam, the solutions presented in the following document might help to resolve the issue; A 'Paper Jam' Error Displays on the HP Officejet 6600 e-All-in-One and 6700 Premium e-All-in-One Pri...
As you will see in the document above, paper jam messages are not only a result of physical paper jams;
The following factors can cause paper jams:
Paper loaded incorrectly in the paper tray.
Damaged or dirty paper rollers.
Torn, wrinkled, or damp paper loaded in the paper tray.
The rear access door or two-sided printing accessory (duplexer) might not be closed or is not locked into place.
Paper was added to a stack already in the tray while the HP product was printing.
The tray contains more than one type of paper.
The paper is jammed inside the HP product where you cannot see it.
An obstruction is blocking the paper path.
Torn pieces of paper from a previous jam are stuck in the product.
The tray is too full.
If printing on an envelope, the edges of the envelope are bent.
I have also seen communication hiccups cause such error messages. This may sound silly, but if the issue persists, after completing the steps in the document I provided, let's leave the router on and unplug the power cable (NOTE: Do not reset the router.), then do the same with the printer, and shut down the computer. After a full minute, plug the router back in, wait for it to fully power up, then plug the printer back in and wait for the wireless light to become solid. Once both the router and printer are on, go ahead and turn the computer back on. Doing this will refresh the network connection.
I hope this heps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Safari problems when quitting and adding bookmarks

Lately i've been having problems with safari, everytime i try to quit the app it freezes and i have to force it quit, and when i add a bookmark it takes forever to do it, it just freezes for about a minute and then adds the page, i did the upgrade and i have version 5.1.5. i thought that upgrade was going to fix it but apparently not. How can i fix this problem.... Help!!!
Thanks!!!!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Safari starts automatically when restarting (Snow Leopard)

Two days ago, Safari began to start automatically when restarting the system (iMac, Snow Leopard). I checked in Accounts>Login Item and it doesn't appear there. I also right-clicked the icon in the dock and the option to open when starting session was disabled.
¿Anyone knows how to solve it?
Thanks in advance.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
As Guest, launch the application(s) and test. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on some Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.

Print Jobs Automatically Stop

Hello All,
I have a MacBook Pro 15", Intel Core 2 Duo, 2.16 GHz, Mac OS X version 10.4.11.
I am connected to a network printer at my office. The printer is a HP Business Inkjet 2800 model. My mac recognizes it as bonjour printer and everything is ok. I can even see the status of the printer (i.e. ink levels, paper, etc of the printer). When I send a file to print, it automatically stops it. Why is this?
I tried resetting the printers from the Printer's Setup Utility, but didnt have any luck in fixing this problem.
Can anybody advice?
Thanks in advance.
andreas

Does it do this with all applications, or a particular application?
See Troubleshooting printing issues in Mac OS X
http://docs.info.apple.com/article.html?artnum=106714
 Cheers, Tom

Row size is expanding automatically, when there is a more text.

Hi
I have fixed row size table in my RTF template.
This table is expanding automatically, when there is more data from database column.
We want the font size should be reduced automatically to fit into this fixed size row, instead of expanding the row automatically.
I am using MS Word 2003, If any inputs really appreciate.
Thanks a lot in Advance..
Ram.

I just tried to fix the row height in the table properties and turned off the allow row to vreak across pages but the row height specification had no effect. You may have to look at some sort of XSL-FO statements but I'm not good on XSL. Still not sure about moving the data across to the next page. The "allow row to break across pages" controls this but I don't see it helping you in a pre printed stationary application.
Do you generate the xml yourself? If so you could look at controlling the size of the element(s) in question and generating the extra lines in the XML rather than trying to do it in the template.
Cheers,
Dave

Cant get images to cycle automatically when a photoshop made web page is opened?

How do you get the images in a Flash web page generated in PS3 to start and cycle through their slideshow automatically when someone opens the page? Do you have to manually start the slideshow by clicking the start button? Can someone tell me how to achieve this as I want my images to cycle as soon as the page is opened so the images and audio track will appear to be linked together? Thanks.

JBraider:
Welcome to the Apple Discussions. If you've added the music file to a page then you will have to do some post editing on that page's js file which will be in the the iDisk/Web/Sites/iWeb/Site Name/PageName_Files folder. The js file will be titled Page Name.js.
In that file look for the text autoplay="false" and change false to true and save. You will need to use a text editor. TextWrangler is a free application and is very good for this type of post publication editing. After saving the file, reload the page and that song will auto start.
Do you Twango?

Libraries dont update when new content added

I have transferred my media files to the shared user folder so that multiple accounts on my imac can have access to them. When I did this the original connected library was fine but the other users libraries showed none of the content. So I proceeded to "add to library" in the other account and it added the whole content as expected. The problem is now if I add additional content to the files then I seem to need to go into each other accounts library and add to library. The original library is automatic but the other libraries don't update automatically. How do I get the other libraries on the other accounts to also update automatically when new content is added?
thanks

You have posted on the iTunes for Windows forum, you might do better on the mac forum.
iTunes does not do folder watching, so only the library you used to add the content will be updated.
There are 3rd party utilities that an deal with this, but I don't have a list for Macs. For Windows there is iTunes Library updater and iTunes folder watch.
TuneRanger would probably do it, but it is not free and may be a bit more than you need.
http://www.acertant.com/web/tuneranger/

My MacBook pro 2012 Mountain Loin 8.2 don't clear the inactive memory automatically when memory needed for other program so I get page outs.

My MacBook Pro 2012 Mountain Loin 8.2 doesn't clear the inactive memory automatically when memory needed for other program so I get page outs. There are much inactive memory when page outs. Why my mac does this?

That's completely normal. If other programs require memory then the system will reallocate Inactive RAM as needed. Page Outs don't mean anything.
About OS X Memory Management and Usage
Reading system memory usage in Activity Monitor
Memory Management in Mac OS X
Performance Guidelines- Memory Management in Mac OS X
A detailed look at memory usage in OS X
Understanding top output in the Terminal
The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
Adding RAM only makes it possible to run more programs concurrently. It doesn't speed up the computer nor make games run faster. What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent. It will improve the performance of applications that run mostly in RAM or when loading programs.

Printing JE automatically when it is added!

Similar Messages

Maybe you are looking for