Printing not working via "Faces" view in Aperture 3

When I select a photo via the "Faces" view and then attempt to print, Aperture doesn't present a Print window- nothing happens. When though I select the same pic (or any other) via the "Split Pane" view, Printing works fine. I'm running A3.2.3 on Lion, Intel iMac. Any suggestions?

This is a know behavior see Why is it not possible to print pictures from Aperture´s folder "faces"? (Aperture 3.2.2) among others.

Similar Messages

Local Printer not working via Remote Link

I have a problem with my remote desktop printing to my local printer. I connect via RD on Windows 7 Home to Windows 7 Pro. I have installed an HP Laserjet Pro CM1415fn printer. All prints fine locally. Also everything printed fine
but have had to have a recent update to my Remote PC that I log into. So the printer had to be reinstalled.
All worked ok for about 6 print jobs then stopped working. Nothing has changed. I have changed the settings on the printer as it seemed to be when the printer went into 'Sleep' mode. I have tried restarting the Printer Spooler in Services
and rebooting the remote PC but no joy.
Any ideas please.

Hi,
You mean after the reinstallation, the local printer worked for a while and then stopped working with nothing changed?
Take a try with the printer troubleshooter:
Open the Printer troubleshooter
Also see if the below thread could help:
Local Printing with
Remote Desktop not working: Windows 7 Pro 32-bit & MS Server 2003
Best regards
Michael Shao
TechNet Community Support

Printer not working via usb connection to airport time capsule

I bought an airport time capsule 3 TB, and I wanted to connect my multifunctional printer-scaner "canon i-sensys MF4350d" via usb to my airport device.However, I found a problem. Although my printer working properly in direct connection via usb,not working when connected via usb to my airport time capsule. when I chose printer In nearby printer list this error apeared:"the software for this printer is currently unavailable please contact the manufacturer for latest version" when I chose add printer and chose the printer model this error apeared:"the printer information has not been acquired"
devices:
printer: canon i-sensys MF4350d
air port time capsule 3 TB
macbook pro me664
osx mountain lion 10.8.5 (latest version)
printer software:canon UFR II ver 2.43(latest version for my printer)

Login to airport utility via Mac or windows pc. Look under connected usb devices and it should say your manufacturer for the printer. If not try rebooting both printer and router with them being plugged in or try different usb cable or port on printer.

How do you reorder the pages in a PDF ie back to front (not individually via Page view)

Sorry if this is in the wrong place or if this has been answered elsewhere but I couldn't seem to search "the database"
How do you reorder the pages in a PDF ie back to front (not individually via Page view). The manual solution of course is to scan or import them in the correct order in the first place. However, this did not happen, and we have many PDF's which are 100% in the wrong order. So we would like to press a button and have them in the right order.
Many thanks in advance for your help...

Got it to work. It returned a completely different path of course just to make life interesting and required a FN+OPTION ENTER in order to return the path. I now have the FLATTEN option in the edit menu.
Just trying it checking all the Flatten options except the fields seemed to work on the first pass. I'm going to try and load a copy of the original complete document. I assume that is the proper way to use this at this point since I created the form ***-backwards?
I've used Adobe layout programs since the Aldus days but Acrobat seems to work differently than any other program I've used.
If I understand what you're saying I should:
1. Design the layout of the form leaving spaces for the fields
2. Open Acrobat, import the document
3. Auto-add and correct, or manually add the fields
4. Fix tabbing
5. Add any additional comments or annotations
6. Flatten everything but the fields? (If the fields are flattened I can't fill out the form unless it's supposed to be a printed form only, right?)
Might just have to break down and RTFM. Acrobat is a really different animal.

Multi-Row insert/update/delete not working via db-link

App. Version: 2.0.0.00.49
DB: Oracle 9i, not sure about the build
Problem: Multirow Update/Insert/Delete doesn't work via db-link.
Error received: ....ORA-1460: unimplemented or unreasonable conversion requested....
Where: Tabular Form generated via Wizard
Side note: It's working properly when local table(s) is/are used, it's not working via db-link or view.
I've encountered this error with single update/insert/delete operations before, but was able to fix it via using temp-variables (v_xyz := :Px_xyz; as the proposed v('Px_xyz') was really slow with my scripts)...but with the automated DML-action I don't see a way to edit it accordingly.
Workaround found:
1a) Use local* collection on HTML-DB-Server, then write single row updates/deletes/inserts to the remote DB via DB-Link
1b) Use local* table on HTML-DB-Server, then write single row updates/deletes/inserts to the remote DB via DB-Link
* Local = on the same server that HTML-DB is running on...
So,...to my questions:
1. Can someone confirm that this is a "known feature" (aka bug)?
2. Can someone tell me if this "known feature" has been eliminated in the newer version of HTML-DB/APEX (> 2.0.0.00.49)?
Thanks.
Ingo

Hi,
Do you have a small test case program that demonstrates this? A JDeveloper project showing what exactly is the problem when trying to use the BDB SQL JDBC driver to insert data into the BDB SQL database? What do you mean by "not working", do you get any errors, you do not get errors but you do not see the data in the database etc?
What are the versions of Java, JDeveloper, ADF and BDB SQL you are using, and on what OS?
Regards,
Andrei

Cascading Dynamic Parameters Do Not Work In Crystal Viewer 2008?

I have generated a report with Crystal Reports 2008 that uses a dynamic cascading parameter. I work in waste management and the report I create in Crystal is used as a "template" with the tonnages collected from all of our customers. Our less technically minded employees can then open this report with Crystal Reports Viewer 2008, use the drop down menus to select only the customer they need a report for and then export this to PDF for delivery.
The report as designed works perfectly in Crystal Reports, but the parameter does not work in Crystal Viewer.
Some of our customers have more than one physical location that we service. The cascading dynamic parameter in my report allows you to select the customer name, and then it only shows the locations linked to that customer, so the end user can select only the relevant location(s) for the report. The cascading parameter is dynamic and allows multiple selections, and is linked to a Saved Data formula. The report is saved with the data.
When the report is opened in Viewer, one of two things happens. If the report is saved in Crystal Reports and a specific customer/location is selected, then ONLY those selected customer/locations are available in the Viewer. If ALL the customers/locations are selected in Crystal Reports and saved, then in the Viewer they are all available, but selecting one customer does NOT narrow down the locations (i.e. it does not "cascade") and instead ALL of the locations are available even if they do not apply to the customer.
If I use a single dynamic parameter and select ALL of the customers (for example), then when this is opened in Crystal Viewer all of the customers are available from the parameters drop down and the report works fine. As soon as this is tried with a cascading parameter however, Crystal Viewer falls down.
Does anyone know of a workaround to this or if there is something I am doing wrong?

I am using the free Crystal Report 2008 Viewer along with designing reports with Crytal Reports ver 12.3. With a test file from SAP called "Interactive Parameters", the parameter feature works to refresh the report. The parameters that are supplied in the sample report work with Viewer. They show up under the parameter list in the parameter side panel in Viewer and are available to make record selections. When I add a parameter to the sample report in Crystal 2008 and then view the report in Viewer, my parameters are unavalable for record selection while the original parameters remain available. Futher, my parameters are displayed under a section called "Current Data Set" in the Parameter side panel, while the selectable parameters are displayed under the "Parameter" section in the parameter side panel. There must be a setting that is treating the parameters I create differently form the parameters created in the original sample report. Any help would be appreciated.

HP Laserjet 1320 attention light on, printer not working.

I checked for paper jam, reseated printer cartridge, removed and reinserted printer and line cord plugs. Turned printer on and off. Attention light remains on and printer not working.

Hi Robert8695,
Let's manage one issue at a time. Regarding the error "unable to establish a two-way connection with the device", check out the link below for troubleshooting you can do to resolve it:
http://goo.gl/u3Snr
Let me know what happens and if the other problems persist as well.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Printer not working following iPad uodate

Printer not working following iPad upgrade

Hi,
Is the printer not mechanically working or are you having a problem with printing wirelessly from your device? Was the upgrade to the ipad software or did you get a new ipad?
Try restarting your apple device - It's a simple fix that sometimes helps re-establish the connection to the printer.
Other things to check would be that there have been no recent changes to the wifi password.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13

File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
Thanks

I hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print

Input textbox not working in Fullscreen view

Hi,
I've created one form application in flash, i have fillup the form(inputbox) in normal view, its working fine. but it's not work in fullscreen view,
Please let me know how do enter the text in input textbox in fullscreen mode.
Note: input textbox not work in fullscreen mode.
Thanks
Suresh

Hello,
I think your problem is very similiar to a problem that I had been suffering from a few days ago.
I think that the below code should solve your problem:
stage.scaleMode = StageScaleMode.NO_BORDER;
Chinmaya

Infopath systemuser() method is not working in infopath view @extrant site .

We have a sharepoint webapplication with infopath views .We have controlled the switch view with authenticating login use id .It is working perfectly in intranet.
When we are publishing the site to internet using public ip @ that time initially infopath forms were not opening so i have used Alternate access mapping and published the infopath forms in ip instead of server name .
Now infopath forms are getting opened but system user() rule is not working and infopath edit forms are not working .Even list view web part with assigned to filtration is also not working .
I am stuck on the issue since Monday . Please suggest how to make it possible . it is very urgent.
We want our customer to access using ad authentication.

Jeeva,
Did you create this form in InfoPath itself or you are modifying a list into InfoPath?
The first screenshot shows you have selected Total "is not equal to" Jan+Feb….
You can simply add Total field with “TextBox” and double click on it and select default value button.
Once it will open up a pop up select “fx” button in value and insert all fields like, Jan, Feb…and then put a “+” sign in between
This will auto populate value once you enter it into any of the month filed.
Also it you have copied fields for several month in InfoPath it won’t work. You have to insert each field separately
Let us know your results
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Windows 8.1 pro 64 bit - finger print not working (sony viao 15126pab)

http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-pro-64-bit-finger-print-not-working/664d9ca8-a0ea-479f-851d-3631e3c1404c hi i am using sony svs 15126pab  2 days before firefox hanged so i forcefully shutdown the system , after rebooting fingerprint not workingthen i go to device manager i found biometrics working properly , 2, 3 times restarted then also finger print not working, then i checked the authentic true suite " its giving error message box and closing every times then i uninstall authentic true suite and installed again ,it asked registration and i registered but i didn't see the finger enrolling options in the software . i enabled biometrics options in administrative templates (components) , other options also enabled in services restarted , reinstalled from Sony Store - nothing helps..................... please help me ,,, i cant enable the add option of fingerprint in sign in options in settings.. the add option is like deactivated , no biometrics tool in control panel, no fingerprint enrolling option in authentic true suite . i purchased the system with windows 8 pro then upgraded to 8.1 now its reserved to windows 10 . so pls give me some solutions to rectify this problem

I cant access any printers, not even the virtual printers.
What I would do is use ProcMon to find out why that Event entry was written. Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable. Since IE9 there have been new .dll involving printing
which have not been reflected in any of our repair tools. However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
unreliable techniques.   E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.)   For example.
Robert Aldwinckle

Internal microphone not working on face time

internal microphone not working on face time

Test the microphone in the Sound preference pane. Does it work there?

Bursting control file for Printer not working in WINDOWS ENVIRONMENT

Hi,
We are trying to print xml publisher report output (PDF) using bursting control file. Is not wokring.
We are using ebs (R12.1.1) on Windows environment.
Any pre-requisite setup (ie. cups config) should be done before printing using control file. Please guide me i am not having knowledge in printer setup and printer part..
Thanks in advance
--Ben

Hi Hussein,
Yes, I am able to print seed concurrent report (o/p -text) to that printer (method:- giving the printer name and copies by clicking " Option " in SRS window.. )
When i do the same for xml publisher publisher report to the same printer , its not working using bursting control file.
I too made the test in xml publisher report without bursting control file , there i faced another new issue. Let me explain
1. We are using RDF as data source . here o/p :-" XML "
2. We are using RTF as layout. In template definition, i chose the default o/p type as :- "HTML"
3. When i submit the request, i choose the printer which is working fine for printing seeded report. (method:- giving the printer name and copies by clicking " Option " in SRS window.. )
4. My printer getting prints HTML tag, instead of desired o/p. I wondered after seeing the printout.
5. I cross checked by clicking view output, its showing me the exact html output as per RTF layout.
Dont know wat happening ??? Help me out.
i did the same for changing default output type in template definition to RTF,PDF.. its printing source code of the output type instead of printing output.
Thanks & Regards,
--Ben

Why does my Kodak printer not work with yosemite?

ever since upgrading to yosemite, my kodak printer will not work. i got as far as being able to download a software update but still no joy.

My kodak 5250 would not print and I tryed the termial with no luck and then i received an email from nowater and turn on Bonjuor in safair and now I am printing i did not enter the ip address of my printer
heres the email
I decided to poke around in the Epson settings via the web interface. To do this, just enter the printer's IP address in a browser that's on the same network (you may have to skip some HTTPS / certificate warnings). From there I looked around until I found Wi-Fi/Network Settings / Services / Protocol. On my system, Use Bonjour was unchecked. I had seen in other people screenshots and videos that when the Add Printer tool works, it shows that it connects via Bonjour Multifunction, so I enabled Bonjour and saved the settings. After waiting a few minutes for the settings to be applied, I was able to add the printer via the Add Printer Default tab (I did change the "Use" setting from "Secure AirPrint" to "Epson WF-3620 Series" option -- I think this is the Epson specific driver).
I don't know if Bonjour is disabled by default or if I turned it off somehow in the past and forgot, but it's an easy enough fix that might work for someone else so I thought I should share.
OTHER posible solotion
Go to Spotlight, then enter Terminal and press Enter.
The terminal window/program opens.
Enter sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf' in the terminal.
Enter your system OS login password when prompted.
Note: The password you enter will not appear, which is normal. Be sure to enter the correct password.
Enter sudo launchctl stop org.cups.cupsdYour screen will look similar to the following:
no updated drivers at this piont

Printing not working via "Faces" view in Aperture 3

Similar Messages

Maybe you are looking for