Printing topics and sub topics

I'm using RoboHelp 7.0. When I generate MS HTML Help a user
can select to print a selected topic or the selected heading and
all the subtopics from the table of contents. When I generate
WebHelp a user can only select to print one topic at a time. Is
there any way to allow a user to print a main heading (book) and
all the subtopics at once?

Welcome to the forum
Not in webhelp. The usual solution is to create PDFs and put
links to them in your topics.

Similar Messages

Print topic window problems on unix

What is used to display the list and status of printers available on unix when using the print topic menu button?
On HPUX, the printer that I am currently using shows up as not accepting jobs even though the lpstat -a says that it is accepting requests.
Any Ideas? Is it something wrong with my system configuration?
I also have a few junk printed names in my list.
Thanks in advance for any help that you can provide.

That dialog is displayed directly by the Java Runtime Engine. There is no OHJ code involved in fetching the list of printers. I would upgrade to the latest JRE version on your platform, and if it still reproduces, contact the JRE vendor.

Copyright Shown When Printing Topics Only

Hi All,
I'm told that we used to be able to display a copyright
statement only when the user would print topics using WinHelp. The
copyright would not display when viewing.
I'd like to do same thing using RoboHelp HTML Help. Is there
a way to do this?
So far I've explored footers and templates but to no avail.
Any help would be appreciated.
Thanks!
Larry

Hi Pete,
Well, it worked great.
First, on getting the compiled Help file to open up, I had to
run MJs Help Diagnostics to get the DLLs registered properly. I
believe the problems cropped in when I installed Flare -- our new
Help tool.
Then, I was able to get the citation working properly with
your excellent instructions. I placed the following in the style
sheet for each topic.
@media screen
p.copyright { display:none; }
@media print
p.copyright { display:block; }
Unfortunately, the Help system currently uses a number of
style sheets rather than just one, but it still only took a couple
minutes to put that code in each .css file.
Then I added the following to the TrueCode of a template
footer.
<p class="copyright">Copyright © 2008 Scantron
Corporation. All rights reserved. Use permitted only under license.
No part of the Help may be reproduced in any form, or by any means,
without permission from Scantron Corporation. www.scantron.com
I was able to apply this to all 1700 help topics in one fell
swoop. That saved me a lot of work. At first there was a style
sheet associated with the template file. This switched each topic's
style sheet to the template's when I applied the template to some
sample topics. So I removed the .css file association with the
template, and then it worked like a charm.
Thanks again for the insight. I really didn't think that I
had a chance to provide that functionality when QA requested it.
Larry

Solution for printing black and white in acrobat

Hi,
Here was the problem :
I was trying to convert my colored pdf file to black and white but nothing was working. Others were having the same problem too (such as http://adobeforums.com/webx/.59b5454d ) and the topic was already archived so I could not post the reply.
I tried also to print as black (as it can be found at the bottom of the print button in the acrobat 8 ) but it just made my whole document black.
So, the solution
TO convert your color pdf to black and white and save it as black and white pdf do the following (I am using acrobat 8 )
1. GO to file > Print
2. Choose pdf from the printer
3. At the very bottom there is a button called "advanced" in the middle of "printing tips" and "summarize comments". Click the advanced button
4. In the advanced option, under output - there is an option called color and the next to it is written "composite"
Change it to "composite gray"
5. press ok and it brings you back to the main printing window
6. Now if you press ok it prints your file to black and white.
Hope this will help some people.

My biggest challenge is printing pdfs of schematic diagrams where color is used to signify "layers" in a drawing. Hardest one to read is "yellow" on white for lines or text.
I found a solution, however it may apply to my specific printer only (Sharp MX-2300N).
From the print dialog, select "Properties" next to the printer name.
From the priter properties popup, select the "Main" tab, and check "Black and White print".
From the "Color" tab, make these selections:
Color Mode: Select "black and white"
Color Adjustment: Check "Text to Black"
Color Adjustment: Check "Vector to Black"
Other printers may have similar configuration options.

Printing error and Export to PDF error after a Quark Express convert

I are working on a catalogue that was previously made with Quark Express. I used q2id to convert over to InDesign CS3. I had some minor issues setting up the new fonts, but that was no big deal. Now that the catalogue is close to finished, I want to do some test print, however, on several of the files it start processing the printing, finish the processing of all the pages, then kills the print job and comes with the following error:
Print Error: The Adobe Print Engine has failed to output your data due to an unknown problem.
Similar error happens when I try to export to PDF, this error only says:
Failed to Export PFD file
Anyone had a similar problem?? I've done a preflight but ID does not indicate any problems with the file nor its content. Is there another tool to scan the file with to find errors?? Possible fix it?? Is there a log file I could check??
In advance, thanks guys.
Working on:
InDesign CS3
Windows XP Pro, SP02
2 GB RAM

Thanks Ken,
Not sure how to check if we do have OPI comments on some of the images, but looks like I have found a solution to the printing problem at least.
Thanks to a respons by Peter Spier to another topic with similar problems:
Peter Spier - 4:00am Mar 11, 08 PST (#5 of 6)
The symptoms could describe document corruption rather than network issues which might fall into the category of things that can be cleared up through export to .inx.
Try exporting one or two of the problem files to interchange format, open those and save as new .indd and make a new book file. See if that behaves differently across the network.
I also found another article about INX files, that confirms this technique:
http://avondale.typepad.com/indesignupdate/2005/08/what_the_heck_i.html
"...INX can also help “clean up” problem files in InDesign CS2—if you’re running into problems, especially with files that started their lives as QuarkXPress or PageMaker files, try exporting the document as INX and then opening that file."
So, I
1. exported all files, one by one to INX or InDesign InterChanged
2. Then reopened those files, saved back as regular .indd files
3. Reopend the new file (hoping for a refreshed file and test to see if it would open without problems.)
4. Then packed the files indevidually and reopend the new packed files when done.
Alle the files now print without any problems but export to PDF still fails with the same error message.
Would the OPI comment be a problem here maybe?
Thanks!
bard

Print Quality and Jagged logos

hi all
I have my logo in a wp doc, it now prints fine. I had a lot of trouble getting it to print well as it always appeared with jagged edges. If I copy and paste it into another doc it prints bad again. Why does this happen?
I've noticed that some documents also print a bit 'washed out' while others print nice and sharp.
So is there an output setting I've missed?
It's driving me nuts.
Thanks
G

There are two issues at work here. First, AppleWorks changes the resolution of any graphic format except PICT to 72 dpi. The best solution to this problem is to save the image as PICT before inserting into AppleWorks. My favorite for this is GraphicConverter, but you can use Preview or Photoshop Elements or any other application that can save as PICT.
For the second issue, this is a problem than became more noticeable with AppleWorks 6.2.9 & has something to do with postscript printing. Go to Preferences > General > Topic: Text & turn Fractional Character Widths on.

Cannot print watermark and Annotation with a combination of OS and application software you use printing is cancelled

cannot print watermark and Annotation with a combination of OS and application software you use printing is cancelled

Hello,
This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

HP Q6236A Wireless Print Server and HP Officejet 5610

Has anyone really successfully installed the HP Print Server successfully? I have tried everything I can think of to get it to work and cannot. I have Vista on my desktop where the officejet is installed and I have XP on my laptop. I have a wireless network installed using a D-Link router that has been working for several years. I downloaded the latest drivers for the Officejet and ensured that they were installed on both PCs. I followed the onscreen instructions for installing the Print Server adapter and the PC adapter on both PCs (actually uninstalled and reinstalled several times.
I got the PC adapter and the printer adapter to work one time on the desktop and then could not connect again. I downloaded the updated file for the USB disconnect problem with Vista and still no luck.
Does this HP Printer Adapter really work? I have 3 friends that also would like to have this feature and all have HP computers and HP printers but we can't get support from HP. What a shame! Any suggestions??
Thank you in advance.

I’ve installed it successfully and worked fine so far. I share a printer with other computers.
My wireless access point is Linksys router and configured with WPA2 PSK AES. And the printer is C4280.
The installations were tough and easier. It depends on the client computer situation.
Did you try followings?
Step1. Configure the wireless setting for Q6236.
1. Uninstall all of existed the printer driver and the related software, for make sure.
You can do it that the printer installer run again. Then it should show uninstall option instead of the installation and chose it.
2. Install Q6236 driver with the PC adapter.
3. Do the advanced setup and setup wireless connection. Please refer the manual.
4. Confirm network connection to the Q6236 by the utility.
The utility icon where it is right bottom corner of the desktop gets green mark when the connection is successful.
Step2. Install the printer device driver.
1. Remove the PC adapter from the computer. It is not needed any more. It is only for wireless configuration for Q6236 once. After that, you can store it in the attic.
2. Disconnect the Q6236 network connection by the utility. This is important.
3. Install the printer driver by the installer.
In middle of the installation, the installer should request you the USB connection to the printer. Then connect the Q6236 network connection. Do not connect it before the request.
For another PC to share the printer with the Q6236.
Both of the PC and the printer should be online. And do not put the PC adapter on the PC.
1. Uninstall all of existed the printer driver and the related software
2. Install Q6236 driver.
In the middle of the installation, Q6236 installer should find the printer itself and chose it.
The PC and the Q6236 should be on same IP sub network.
3. Confirm the network connection to the Q6236 by the utility.
4. Do above Step2-2.
If you do not get successful, please tell me which step was problem.

PO PrintOut in Service and Sub-Contracting PO

Dear Gurus,
When we go for the Print Preview of Service Purchase order with Message
type as NEU, in the Print Preview or physical output, Serivce Activity
type,value and the quantity is not diplaying in the development server.
But, the same is displayed in the sandbox.
Also, When we go for the Print Preview of Sub-Contracting Purchase
Order with Message type as NEU, In the Print Preview Components to be
sent for the vendors are not displayed.
But, the Same is displayed in the Sandbox.
We want the subcomponents to be printed in the Subcontractor Purchase
Order, and also the specific activities to be printed in Service
Purchase Order.
With Regards,
Siddharth Poste

hi
check the print program and the sap scripts used and correct as required

Problem with Print Preview and Print events

Hello Experts,
We have developed a program, in which, I m trying to display the % values in the Sub Totals and Grand Total lines, The logic and program functionality is performing very well. The report is displaying the output the way end user is willing to see.
The main problem is, the entire % values are going to a toss when we click the Print Preview or trying to print the report, which is not supposed to go that way. I have even tried to debug the program where the problem is evolving in the code, but it is not raised from the code.
Please refer to the screen shots.Before clicking the Print Preview and after clicking the print preview.
Do anybody face the same kind of problem ever?
If so please let me know what could be the best possible solution.
Thanks & Regards
Harish Kumar MK

Hi Harish,
I have use the below code but not for percentage... I think for percentage you just have to calculate the normal percentage and replace it with a subtotal value.
This is not your complete code it will be better if you mail your complete code so that i can debug and check.
   TABLES: vbak.
TYPE-POOLS: slis.                      " ALV Global types
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg,              " Sales organization
s_kunnr FOR vbak-kunnr,              " Sold-to party
s_vbeln FOR vbak-vbeln.              " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
BEGIN OF gt_vbak OCCURS 0,
    vkorg LIKE vbak-vkorg,             " Sales organization
    kunnr LIKE vbak-kunnr,             " Sold-to party
    vbeln LIKE vbak-vbeln,             " Sales document
    netwr LIKE vbak-netwr,             " Net Value of the Sales Order
    waerk LIKE vbak-waerk,             " Document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
*      Form f_read_data
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
           FROM vbak
             UP TO p_max ROWS
          WHERE kunnr IN s_kunnr
            AND vbeln IN s_vbeln
            AND vkorg IN s_vkorg.
ENDFORM.                               " F_READ_DATA
*      Form f_display_data
FORM f_display_data.
DEFINE m_fieldcat.
    add 1 to ls_fieldcat-col_pos.
    ls_fieldcat-fieldname   = &1.
    ls_fieldcat-ref_tabname = 'VBAK'.
    ls_fieldcat-do_sum      = &2.
    ls_fieldcat-cfieldname = &3.
    append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
    add 1 to ls_sort-spos.
    ls_sort-fieldname = &1.
    ls_sort-up        = 'X'.
    ls_sort-subtot    = &2.
    append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
    ls_fieldcat TYPE slis_fieldcat_alv,
    lt_fieldcat TYPE slis_t_fieldcat_alv,
    lt_sort     TYPE slis_t_sortinfo_alv,
    ls_sort     TYPE slis_sortinfo_alv,
    ls_layout   TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'.                  " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'.                  " Sort by kunnr and subtotal
m_sort 'VBELN' ''.                   " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      is_layout   = ls_layout
      it_fieldcat = lt_fieldcat
      it_sort     = lt_sort
    TABLES
      t_outtab    = gt_vbak.
ENDFORM.                               " F_DISPLAY_DATA
BR
Sumeet

Vendor classification and sub classification

All,
we have list of vendors with classification and sub classification. They need to print the vendor line item report with these two classification. For example
Vendor abc has classification of non-raw material and sub classification of indirect material. vendors with freight classification and service sub classification. etc
Can someone please help me of how we can do this. I need detailed information.

Define class groups and classes separetely link each class to the rel. group. Assign the class to the vendor.

Can I import an entire folder and sub-folders at once?

I am fairly new to LR and have TONS of files in a main Photo folder on Vista. Some of these files have duplicate names, some were taken with very early gen digital camera as well as newer files with my 40D. But importing each folder and sub folder 1 at a time is going to take a million years. Here is basically what I want to do.
1) Import ALL pics (probably about 6-8 thousand) at once
2) Go through these photos and tag them as well as get rid of the obviously crappy pics that i will never do anything with, kill the dupes
3) Meta tag as many as i can
4) export to a new foler
All files are jpg. Nice memorial day project eh?

I would make some suggestions to your proposed workflow.
Instead of "3) Meta tag as many as i can", I would say assign keywords and captions on all of your photos. Keywords and captions are a very powerful way of organizing, and when well done, they make finding your photos extremely easy. I understand that this takes time and effort, but you will find that the time and effort you put into this pays off well.
If you leave some photos without keywords and captions, how will you find them? I know how ... you will search for 30 minutes and probably say some four-letter words in the process.
Instead of "4) export to a new foler[sic]", don't bother exporting as a regular part of your workflow. Just don't do it! Only export when you need the photos outside of Lightroom, such as for e-mail or uploading or printing at a commercial printer. Otherwise, there is no need for you to take up the disk space with thousands of exported .jpgs.

PGI for both main and sub items (Sales BOM)

Hello SD friends,
I'm trying to map some BOM scenario.
Only main item should be relevant for princing.
Here's what I've done :
1. Create sales BOM via CS01
2. Maintain item category group ERLA for main item and NORM for sub item MM01
3. Maintain item category TAQ for main item and TAE for sub item VOV4
When I wanna do PGI, system creates material document only for main item.
Which means that PGI has not been done for sub items.
Is there any way to make PGI possible for both main and sub items ??
Regards,
Bahia.

Can you clear, that why you want to issue both Main item/Sub Item, where your pricing is @ main item level.
in Main item level Pricing, Main item itself includes components. Once you issue the main item. from Inventory this main item wil be reduced.
Eg: In Case of Main Item- Computer (Assume Components - Monitor , Keyboard , CPU & Mouse)
Price for Computer - $1200. Component prices individually- $300 , $100, $700, $100 - These prices applicable only when you sell as BOM at Subitem level Pricing Or Seperately )-
In SO: - Order Computer (System explodes Components to verify,which are the subitems consists in Main Item)
DEL:- Components will be copied in Delivery , but not for dispatch (Sch Line Cat:CT has these controls)
Inv: Only Main item will be displayed for print.
NOTE: for your requirement, you can change the Schline Category from CT - CN- which is relevant for delivery with movement type i601 -in SO. Then you can dispatch components & these components will not copied into Invoice ,as they are not relevant for billing.
If you want CN has to determined automatically, maintain Schline Category determination accordingly.
Hope it helps,
Any info, please revert

This is regarding totals and sub totals in sap-scripts

Hi to all...............
1...How to print totals and subtotals in sap-scripts? where we have to code the logic.what sort of logic is needed to print the same?
regards,
swaminath.

Hi
HI,
To calculate totals and sub totals in sap scripts you have to use subroutines.
Say if you have to add the unit price (KOMVD-KBERT) then in the main window whereever tat value is picked write this routine
/: DEFINE &TOT_PRICE&
/: PERFORM F_GET_PRICE IN PROGRAM <subroutine prog name> /:USING &KOMVD-KBERT& /:CHANGING &TOT_PRICE& /:ENDPERFORM
Then write the variable where ever you want it to be printed (mostly it will be in footer window)
Then create subroutine pool program and you have to write the code.
FORM F_GET_PRICE tables int_cond structure itcsy
outt_cond structure itcsy. data : value type kbert.
statics value1 type kbert.
Read int_cond table index 1.
value = int_cond-value.
value1 = value1 + value.
Read outt_cond table index 1.
outt_cond-value = value1.
Modify outt_cond index 1.
ENDFORM.
To know more, have a look at this thread ..
Re: SAP Script: Display Total calculated on page 2 in page 1
<b>Reward if usefull</b>

Why do I have to turn off and on my HP office jet 7500A every time I want to print a page? I can print one and imediatly try to print a second and it says it cant be found on the network.

Since going up to Lion I am having problems with my HP Officejet 7500A printer. It is on the network wirrelessly. After every page I have to turn the printer off and back on again because my mac cant find the printer on the network. The windows mechines here can still find it, but not my Mac Pro. What is going on?
Obviously I have it set up right because I can print to it. problem is my mac thinks it goes off line every time I tell it to print another document.
Anyone know of a fix?
Thanks!

Lion may have replaced files that partially made up your printer drivers. Either way, HP saw fit to make a new set of drivers specifically for 10.7 so you may want to use it simply to avoid any bugs tehy found.
Get it here:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-98095-2 &cc=us&dlc=en&lc=en&os=219&product=4083652&sw_lang=
Hope I helped

How to get the values of all elements and sub elements from following xml

how to get the values of all elements and sub elements from following xml...
<?xml version="1.0" encoding="UTF-8" ?>
<List_AML_Finacle xmlns="http://3i-infotech.com/Cust_AML_Finacle.xsd"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://3i-infotech.com/Cust_AML_Finacle.xsd List_AML_Finacle.xsd">
<TransactionID>TransactionID</TransactionID>
<Match>
<Src_Matched_Field>Src_Matched_Field</Src_Matched_Field>
<List_Matched_Field>
<FSFM_Matches>
<NUMBER>NUMBER</NUMBER>
<TERROR>TERROR</TERROR>
<TU>TU</TU>
<NAMEU>NAMEU</NAMEU>
<DESCRIPT>DESCRIPT</DESCRIPT>
<KODCR>KODCR</KODCR>
<KODCN>KODCN</KODCN>
<AMR>AMR</AMR>
<ADDRESS>ADDRESS</ADDRESS>
<SD>SD</SD>
<RG>RG</RG>
<ND>ND</ND>
<VD>VD</VD>
<GR>GR</GR>
<YR>YR</YR>
<MR>MR</MR>
<CB_DATE>CB_DATE</CB_DATE>
<CE_DATE>CE_DATE</CE_DATE>
<DIRECTOR>DIRECTOR</DIRECTOR>
<FOUNDER>FOUNDER</FOUNDER>
<TERRTYPE>TERRTYPE</TERRTYPE>
</FSFM_Matches>
<OfacMatchDetails>
<UID>UID</UID>
<TITLE>TITLE</TITLE>
<SDNTYPE>SDNTYPE</SDNTYPE>
<REMARKS>REMARKS</REMARKS>
<ID_UID>ID_UID</ID_UID>
<IDTYPE>IDTYPE</IDTYPE>
<IDNUMBER>IDNUMBER</IDNUMBER>
<IDCOUNTRY>IDCOUNTRY</IDCOUNTRY>
<ISSUEDATE>ISSUEDATE</ISSUEDATE>
<EXPIRATIONDATE>EXPIRATIONDATE</EXPIRATIONDATE>
<ADDRESS1>ADDRESS1</ADDRESS1>
<ADDRESS2>ADDRESS2</ADDRESS2>
<ADDRESS3>ADDRESS3</ADDRESS3>
<CITY>CITY</CITY>
<STATEORPROVINCE>STATEORPROVINCE</STATEORPROVINCE>
<POSTALCODE>POSTALCODE</POSTALCODE>
<COUNTRY>COUNTRY</COUNTRY>
</OfacMatchDetails>
</List_Matched_Field>
</Match>
</List_AML_Finacle>

avoid multi post
http://forum.java.sun.com/thread.jspa?threadID=5249519

Printing topics and sub topics

Similar Messages

Maybe you are looking for