Printing was hanged, when pressed the 'X', it became cancelling and hanged again
I just bought the ePrint B110 wireless printer 2 weeks ago, installed successfully with nice printout. However once it went into sleep mode, the printing request was failed and couldn't wake up the sleep mode. Needed to wake up manually then could print. However, now it totally dead. When sent print, the printing was hanged, pressed the 'X', it became cancelling and hanged again, then turn off the machine. Turned on again, it was normal in ready mode, when sent print, the error happened again and couldn't print at all. Pls advise.
This question was solved.
View Solution.
Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP
Similar Messages
-
I had a power failure and then began getting a message that the printer (Canon Pixma 610) was not detected. So, I unplugged it from the computer, restarted the computer and no change. The printer was still showing as the default printer, but not being detected. So I deleted the printer and then tried to reinstall it. However, when I clicked on the + sign to reinstall nothing came up. The screen was blank with no printer choices. I went to the Canon website to try and download the driver and received this message: There is no driver for the OS Version you selected. The driver may be included in your OS or you may not need a driver. I would appreciate any help...
MSG2014 wrote:
I finally contacted Canon and they informed me that my printer is not compatible with Maverick
As Greg stated, the Canon support person is simply referring to what they see on the web and knosw nothing about Mac's. The reality is that the v10.8 driver will work on 10.9. You just may need to get past Gatekeeper to install it. So here is a link to the v10.8 driver. If you get a message stating that the driver is not signed and cannot be installed, then this is Gatekeeper blocking it. So to install it, right click (or Control-click) on the installer and select Open from the pop-up menu. Now you will have the option to install.
The second issue is the printer not appearing in the Add printer window. The USB cable is often the cause as suggested already. Also USB hubs can be a cause. To check if the Mac can see the printer, open System Information and select USB in the left column. The top right pane will show all the USB busses in your Mac. The MP610 should be listed under one of these busses. If it is not present, then try another USB cable and/or another USB port on the Mac. Until you see the MP610 in this view, you will not be able to add the printer. -
How to when press the button and can change the value in the table?
this is my code so far with a table and a button..how can i make it when press the button and the data in table change..
* SimpleTableDemo.java is a 1.4 application that requires no other files.
import java.awt.BorderLayout;
import java.awt.Button;
import java.awt.Color;
import java.awt.Dimension;
import java.awt.event.MouseAdapter;
import java.awt.event.MouseEvent;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTable;
public class SimpleTableDemo extends JPanel {
private boolean DEBUG = false;
private JPanel button;
private JButton enter;
public SimpleTableDemo() {
super(new BorderLayout());
//button.setBackground(Color.pink);
//setForeground(Color.pink);
String[] columnNames = {"First Name",
"Last Name",
"Sport",
"# of Years",
"Vegetarian"};
Object[][] data = {
{"Mary", "Campione",
"Snowboarding", new Integer(5), new Boolean(false)},
{"Alison", "Huml",
"Rowing", new Integer(3), new Boolean(true)},
{"Kathy", "Walrath",
"Knitting", new Integer(2), new Boolean(false)},
{"Sharon", "Zakhour",
"Speed reading", new Integer(20), new Boolean(true)},
{"Philip", "Milne",
"Pool", new Integer(10), new Boolean(false)}
final JTable table = new JTable(data, columnNames);
table.setPreferredScrollableViewportSize(new Dimension(500, 70));
if (DEBUG) {
table.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
printDebugData(table);
//Create the scroll pane and add the table to it.
JScrollPane scrollPane = new JScrollPane(table);
enter = new JButton("Press me");
//Add the scroll pane to this panel.
buildButton();
add(scrollPane, BorderLayout.NORTH);
add(button, BorderLayout.CENTER);
private void buildButton(){
button = new JPanel();
button.add(enter);
private void printDebugData(JTable table) {
int numRows = table.getRowCount();
int numCols = table.getColumnCount();
javax.swing.table.TableModel model = table.getModel();
System.out.println("Value of data: ");
for (int i=0; i < numRows; i++) {
System.out.print(" row " + i + ":");
for (int j=0; j < numCols; j++) {
System.out.print(" " + model.getValueAt(i, j));
System.out.println();
System.out.println("--------------------------");
* Create the GUI and show it. For thread safety,
* this method should be invoked from the
* event-dispatching thread.
private static void createAndShowGUI() {
//Make sure we have nice window decorations.
JFrame.setDefaultLookAndFeelDecorated(true);
//Create and set up the window.
JFrame frame = new JFrame("SimpleTableDemo");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
//Create and set up the content pane.
SimpleTableDemo newContentPane = new SimpleTableDemo();
newContentPane.setOpaque(true); //content panes must be opaque
frame.setContentPane(newContentPane);
//Display the window.
frame.pack();
frame.setVisible(true);
public static void main(String[] args) {
//Schedule a job for the event-dispatching thread:
//creating and showing this application's GUI.
javax.swing.SwingUtilities.invokeLater(new Runnable() {
public void run() {
createAndShowGUI();
}Cross-post:
http://forum.java.sun.com/thread.jspa?threadID=676105 -
My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?
If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.
Must be serious because you have stated the problem 4 times now.
Here are a number of things that you can try and maybe one of them will help.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
And ... You can always install the updates in iTunes on your computer and then sync them to the iPad. -
AX light is yellow and does not flash and doesn't change even when I press the "reset". Tried unplugging and reset -- still a solid yellow. I assume this is a goner?
Unfortunately, based on your description, I would have to second that your Express is a "goner." However, before giving up on the unit, be sure that you attempt a "factory default" reset at least 3x just to be sure.
-
BB 9900 - Activation failed. An error was encountered when sending the activation transmission
Hi Team, I have a problem configuring email and using internet from my blackberry device. I have purchase this divice and got my Blackberry plan activated from Airtel. I have followed up with service provide and could see that they have activated and has no issue from there side. Let me know why this issue persists. Error 1: while trying to configure emailActivation failed. An error was encountered when sendig the activation transmission Error 2: Whild using internet.Browsing over the mobile network is not included as part of your current sercie plan. To browse the web, you must use Wi-Fi or contact your service provider to change your service plan. Regards,Sunil K
sunilkesavareddy wrote:
Hi Team, I have a problem configuring email and using internet from my blackberry device. I have purchase this divice and got my Blackberry plan activated from Airtel. I have followed up with service provide and could see that they have activated and has no issue from there side. Let me know why this issue persists. Error 1: while trying to configure emailActivation failed. An error was encountered when sendig the activation transmission Error 2: Whild using internet.Browsing over the mobile network is not included as part of your current sercie plan. To browse the web, you must use Wi-Fi or contact your service provider to change your service plan. Regards,Sunil KAre you sure you are connected to a BIS plan (BlackBerry Internet Service) ? Regular data plan will not work, ask Airtel if it's a BIS plan. -
Getting Error 500 when pressing the backbutton of the browser after log out
I am working on a web project , and am using AJAX in my application. I need to get list of templates and events stored in the database when my page is being loaded so im using AJAX. the problem is, when i press the logout in my page and after logging out if i press the browsers back button then im getting the Http Error 500.
Regarding this issue i previously also posted but i havent get solved my problem. (may be i havent posted my source code , rather i just posted error message.).
Here is the error message of the browser,
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
java.lang.NullPointerException
com.koffee.eon.subscriber.action.TemplateNames.doPost(TemplateNames.java:66)
javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
org.apache.struts2.dispatcher.FilterDispatcher.doFilter(FilterDispatcher.java:416)
Here is my source code of the TemplateNames class,
package com.koffee.eon.subscriber.action;
import com.koffee.eon.subscriber.persistence.*;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.http.HttpServlet;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession;
import java.text.SimpleDateFormat;
import java.util.*;
public class TemplateNames extends HttpServlet {
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html");
PrintWriter out = response.getWriter();
String html="",html1="";
HttpSession session=request.getSession();
UserCompleteDetails sessionDetails=(UserCompleteDetails)session.getAttribute("userdetails");
System.out.println("checking session after logout"+sessionDetails);
if(sessionDetails==null)
System.out.println("session details in if condition is:"+sessionDetails);
response.sendRedirect("/login.jsp");
System.out.println("after checking "+sessionDetails);
String type=null;
type=request.getParameter("type");
String subscriberUserEONId=sessionDetails.getUserEonId();
System.out.println("subscriberUserEONId from session is: "+subscriberUserEONId);
SimpleDateFormat sdfDate=new SimpleDateFormat("yyyy-MM-dd");
SimpleDateFormat sdfTime=new SimpleDateFormat("HH:mm:ss");
TemplateManagement dbObj=new TemplateManagement();
EventManager dbObj1=new EventManager(); // for events
List templateNames=dbObj.getTemplates(subscriberUserEONId);
List eventIds=dbObj1.getEventsCompleteList(subscriberUserEONId); // for events
System.out.println("size of list of templates is:" + templateNames.size());
System.out.println("size of list of events is: "+eventIds.size()); // for events
if(type==null)
html+="<table><tr><td>Select Your Invitation Card: ";
html+="<select name=\"templateName\" class=\"cell\" onchange=getImage(this.value) onblur=checkTemplate() tabindex=\"1\">";
html+= "<option value=\"0\">Select</option>";
HashMap hmap=new HashMap();
try {
for(int i=0;i<templateNames.size();i++) {
TemplateMaster bean=(TemplateMaster)templateNames.get(i);
Integer templateid=bean.getTemplateId();
String templatepath=bean.getTemplateRelevantpath();
hmap.put(templateid,templatepath);
System.out.println("path recevied from db for template is: "+templatepath);
System.out.println("template id received from db is : "+templateid);
html+= "<option value=\"" + templateid + "\">" + templateid + "</option>";
} catch(Exception ee) {ee.printStackTrace();}
session.setAttribute("hmap", hmap);
html+="</select></td></tr><tr><td>";
System.out.println("path new is : "+html);
html+="</td>";
System.out.println(html);
html+="</td></tr><tr><td>Select an Event: ";
html+="<select name=\"eventId\" class=\"cell\">";
try {
for(int j=0;j<eventIds.size();j++) {
EventMaster bean=(EventMaster)eventIds.get(j);
String eventName=bean.getEventName();
Integer eventId1=bean.getEventId();
String eventStartDate=sdfDate.format(bean.getEventStartdate());
String eventStartTime=sdfTime.format(bean.getEventStarttime());
String eventId=eventName+" on "+eventStartDate+" at "+eventStartTime;
System.out.println("event id from database is : "+eventId1);
System.out.println("event list from database is : "+eventId);
html+= "<option value=\"" + eventId1 + "\">" + eventId + "</option>";
} catch(Exception eee) {eee.printStackTrace();}
html+="</select></td></tr></table>";
System.out.println(html);
out.println(html);
out.flush();
out.close();
if(type!=null)
html1+="</td></tr><tr><td>Select an Event: ";
html1+="<select name=\"eventId\" class=\"cell\">";
try {
for(int j=0;j<eventIds.size();j++) {
EventMaster bean=(EventMaster)eventIds.get(j);
Integer eventId1=bean.getEventId();
String eventId2=eventId1.toString();
String eventName=bean.getEventName();
String eventStartDate=sdfDate.format(bean.getEventStartdate());
String eventStartTime=sdfTime.format(bean.getEventStarttime());
String eventId=eventName+" on "+eventStartDate+" at "+eventStartTime;
System.out.println(eventId);
html1+= "<option value=\""
+ eventId2 + "\">" + eventId + "</option>";
} catch(Exception eee) {eee.printStackTrace();}
html1+="</select></td></tr></table>";
out.println(html1);
out.flush();
out.close();
}chinni wrote:
java.lang.NullPointerException
com.koffee.eon.subscriber.action.TemplateNames.doPost(TemplateNames.java:66)Do you understand when a NPE will be thrown? Some object reference at line 66 of TemplateNames.java is null while you didn't expect and you still invoke/access it. To fix this, add a nullcheck or just instantiate the reference. -
Emails get sent in Mail when pressing the space bar whilst spell checking
Why do emails get sent in Mail when pressing the space bar whilst spell checking ?? This is beyond annoying. It's been happening for ages on my MBP. I have seen others complain and I can't understadn why this simple bug has not been fixed. Any help on this would be very much appreciated. thank you.
Hi
In composing I have Check Spelling "when I click send" selected. I tried on my iMac, my Mail account is sync'd via iCloud etc.. I got the same thing, when you hit send and review your spelling, I need to do that a lot, as well as insert missing words. As soon as you hit the space bar off goes the email. I have seen others complain of this on the google. I have now switched to check as I type but when i make a typo Mail just puts a red line under the word, it doesn't open up the Spell Checker dialog.
Is there away of resetting my Mail Apps database ? MAybe something is corrupt.
thanks. -
HT1619 menu does not appear when pressing the menu bottom from the apple remote
I got a apple remote but the menu does not appear on the computer when pressing the menu bottom!?
Prior to Lion, it used to invoke the menu of the FrontRow application. FrontRow is no longer available with Lion. The menu button will work with apple TV.
Regards,
Captfred -
When trying to connect to a projector, I pressed the wrong combination of keys and now I have voice commands and a border around all typing fields on my powerbook. How can I get out of this mode?
System Preferences, Universal Access, Seeing, VoiceOver.
-
When pressing the "R" key on the keyboard to record the following pops up - "Beta-only warning message-not to be localized. Can't create record file, Please Report" I press O.K. and this pops up - "Error occurred Result= -48". Can't figure out why. First time I have every had problems> What's up with this?
a -48 error is a duplicate filename.
the first things i'd try are the oddball problems fixes:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen) -
Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard fast it lag until I cannot locked or switch off the phone
Same issue here both with my iphone 5S as well as my iPad2. THe sync to my macbook air does not complete and it shows a large overcapacity level when connected, but once I disconnect there is plenty of room (4 GB) available, not a 20 GB overage.
-
How to display all the under menus options when pressing the main menu on adobe muse?
How to display all the under menus options when pressing the main menu on adobe muse?
How to display all the under menus options when pressing the main menu on adobe muse?
-
Hear sound when press the home button, as if there is a gap underneath !!
Hear sound when press the home button, as if there is a gap underneath !!
Take it back to Apple if you think there's a problem with it.
Maybe you are looking for
-
Will I loose existing data on the Time Capsule if I use it now for Time Machine also?
Till now I only save photos, music and movies on my AirPort Time Capsule 2 TB. From now on I also want to use it for Time Machine Backups also. But I am not sure if it my data and the backup will exist in parallel.
-
Yahoo IM only updates when I unlock my Palm Pre (1.3.5.1)
In the messenging app, any IMs I get to my yahoo account will queue and not notify until I unlock (with password) my phone. This means that I need to repeatedly lock and unlock my phone to stay current in the conversation.. obviously annoying... anyo
-
Does table load make the view INVALID
Hi All, One of our jobs failed due to an INVALID view. When I check the view and last_ddl_time, it has a time stamp, which is recent than the the job failure. I have also checkd the base table. One of the table partition has same time stamp for last_
-
What channels are in HD in the entertainment pack?
What channels are in HD in the entertainment pack?
-
How to uninstall search conduit?
I accidently install this search.conduit browser and now i can't get rid of it i dont know how to uninstall,i itryed everything i can't even find it on my downloads, is really annoying it comes up evrytime i try to search for something and i have to