Does table load make the view INVALID

Hi All,
One of our jobs failed due to an INVALID view. When I check the view and last_ddl_time, it has a time stamp, which is recent than the the job failure. I have also checkd the base table. One of the table partition has same time stamp for last_ddl_time as the view. Looks like the partition has been exchanged or some othe DDL ran on that partition. But table structure was not altered (no columns added, no renaming of the columns). My question by anmy chance adding a partition/partition exchnage/loading a partition makes the views on the table INVALID?? What could be the reason to this?
Thanks in advance....

Hi,
The packages which is using this view will become invalid but when the package is accessed next time it will be valid.
Source:-
~~~~~
Check http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:18018481500446
Thanks

Similar Messages

Can you see a timeline of a sequence you've loaded into the viewer?

Greetings Finalcutters,
OK, another query about how to access an Avid feature in Final Cut --
I find it very useful to edit from one sequence onto another. But I want to be able to do this in a frame-accurate manner. Best would be to have the sequence timeline available when it's loaded in the viewer.
Right now, to edit only part of a sequence onto another, I must load the sequence into the canvas, make in and out points on the timeline, then load it into the viewer, bring up new sequence, and make the edit.
But what if I then want to tweak my in and out points? Groan.
Any ideas, or is this just another thing to tell Apple about in their feedback page?

I just started getting this message too. Just started the last couple of days. It doesn't give a time that it was used. All it says that "appleid" was used to sign in to facetime on Macbook. My Macbook is not named "Macbook." It also doesn't correlate to times when computer is being used.

Yosemite looks like a downgrade, flat, childish and no more ability to make the view of anything personal. How do I go back to the previous operating system?

Yosemite looks like a downgrade, flat, childish and no more ability to make the view of anything personal. How do I go back to the previous operating system?

Erase your hard drive using Disk Utility from the Recovery HD, then restore your old system from your backups.

ORA-26004: Tables loaded through the direct path may not be clustered

hi ,
I im planning to upload data to IOT table using sqlldr. but end with error.
ORA-26004: Tables loaded through the direct path may not be clustered.
how to resolve this. as this table going to insert high voluem data and to speed up the table quary we created IOT table.
table create syntax:
create CLUSTER C_HUA
B_number number(10),
A_number number(10),
ins_date date,
account number(10),
C_number number(10))
SQL> CREATE TABLE HUA
A_number number(10),
B_number number(10),
ins_date date,
account number(10),
C_number number(10)
CLUSTER C_HUA
B_number,
A_number,
ins_date,
account,
C_number);
SQL> CREATE INDEX HUA_index1 on CLUSTER C_HUA;
Pl help to resolve this.
thanks
ashwan

You have to use conventional path. DIRECT=false.
Restrictions on Using Direct Path Loads
The following conditions must be satisfied for you to use the direct path load method:
* Tables are not clustered.
* Tables to be loaded do not have any active transactions pending.
* Loading a parent table together with a child Table
* Loading BFILE columns

Does ios 7 make the ipad 2 slower?

Does ios 7 make the ipad 2 slower?

Bought my wife a used, but practically like new 64 GB iPad 2 and iOS 7 seems to run fine with no issues other than the wallpaper resizing issues mentioned in other iOS 7 posts.
I think iOS 7 runs even better on an iPad 2 because no extra processing power is being used for a retina display because iPad 2 doesn't have a retina display.
I noticed this as my iPad 3 on iOS 7 runs well, but seems a little laggy compared to my wife's iPad 2.

I recently purchased Scan Snap for my Mac OS.X which came with Acrobat XI standard. This does not load on the Mac. Can I switch this for a Mac version?

I recently purchased Scan Snap for my Mac OS.X which came with Acrobat XI standard. This does not load on the Mac. Can I switch this for a Mac version?

Order product | Platform, language swap

Does this upgrade make the iPhone 4S?????

Does this upgrade make the iPhone 4S?????

If you have an iPhone 4, it will always be an iPhone 4. The 4S has different hardware.

Select data from all the table names in the view

Hi,
"I have some tables with names T_SRI_MMYYYY in my database.
I created a view ,Say "Summary_View" for all the table names
with "T_SRI_%".
Now i want to select data from all the tables in the view
Summary_View.
How can i do that ? Please throw some light on the same?
Thanks and Regards
Srinivas Chebolu

Srinivas,
There are a couple of things that I am unsure of here.
Firstly, does your view definition say something like ...
Select ...
From "T_SRI_%"
If so, it is not valid. Oracle won't allow this.
The second thing is that your naming convention for the
tables suggests to me that each table is the same except
that they store data for different time periods. This would be
a very bad design methodology. You should have a single
table with an extra column to state what period is referred to,
although you can partition it into segments for each period if
appropriate.
Apologies if i am misinterpreting your question, but perhaps
you could post your view definition and table definitions
here.

Full extractor does not load all the g/l accounts

Hello experts,
I have a empy DataStore Object (ZFI_O02) and I want to load the information (g/l accounts) with a full infopackage. The load have the status of "Green" but when I check the information I have accounts without some documents. I do not know why my full extractor does not load correctly all the information.
I test the DataSources (3FI_SL_K2_SI) with the Tcode RSA3 and the test shows the all the accounts with all the documents.
Others tests -> I used the same infopackage (full mode) and restrict with the 0FISCPER (2010) and 0GL_ACCOUNT (Account Number) checked the PSA and I have the acoount with all the documents.
-> I used the same infopackage (full mode) and restrict only with the 0FISCPER (2010) checked the PSA and I have the account with one document missed.
Please help me.
Regards
Jeanette

Hi Jeanette,
Looks like the data is getting overwritten in the DSO. This usually happens when there are records with same Key Fields and also has certain characteristics that are unique but not key fields.
I suggest, you take a subset of a GL for which the data does not match, then compare the entries in the DSO and the PSA.
For Eg: If Business Area is not the key, then the data for all the same business areas will be overwritten. Thus making the BA key would eliminate the problem.
Hope this helps.
Regards,
Gaurav

Displaying Description for SAP Table Field in the View

Hi
We are working on a HANA implementation Project Where we have a requirement to build View on HR tables.
Issue: When i join HR infotypes (tables ) in the view it is getting only Technical names and not descriptions. i have used Semantics option which is available and still it doesn't bring description in to the View.
Please let me know if any one has solution or work around for this.
We have more than 100 fields in the View so maintaining Descriptions manully will take lot of time.
Regards
Venkat

Hi Chandra
Yes, We have Description available in the sourece tables.
We are connected to HANA Suite and tables in ECC having Descriptions.
Regards
Venkat

Table for seeing the Views maintained for a material in material master

i have maintained CLASSIFICATION view for certain materials, but when i go to table MARC and check the maintenance status, i cannot see the letter "C" which stands for classification.
I need to sort out the materials for which classifiction view has been maintained.
Is there any other way to do it?
Pls help
Thanks
Neeraj

Hi
U Can check the status of Veiws maintained in MSTA
The views are
A Work scheduling
B Accounting
C Classification
D MRP
E Purchasing
F Production resources/tools
G Costing
K Basic data
L Storage
P Forecasting
Q Quality management
S Warehouse management
V Sales
X Plant stocks
Z Storage location stocks
thanks

Does safari load in the background?

and if you have two pages open will it continue to load one while you look at the other?

It actually loads if you do not quit Safari, but if you do not re-access the page that is loading in the background in a timely manner it will refresh itself when finally accessed (I never timed it to see at what point it will refresh itself but it does not take to long)

Can you make the view size of Code page bigger?

If I change the View by zooming it only seems to work on the Design parts of the screen and not the text within the code section.
Is it possible to make this larger when I am editing?
Thanks, Ian

Sure. Go into Edit > Preferences > Fonts and change the Code View Font and Font-Size. If you work with CSS stylesheets, I have discovered that changing my Code View Font to Verdana makes more pronounced curly brackets, and makes it easier to distinguish them from ordinary parentheses.
Beth

Why does my imac make the unlock sound when it's not in use

On several occasions over the past few days I've heard my iMac make the sounds I associate with unlocking preferences several times while I was not using the machine. Can anyone explain this?

Does any apps are running the background? If yes, check them and close them. Are you using it under any high levels of temperature?

App Store does not load & kills the internet connection

Hello I'm currently using MBP 13' 2011 v. 10.7.2.
App Store window pops up after opening, but nothing actually shows up. It shows as if it is trying to load the App Store with the spinning indicator, but the app remains empty. Not only it does not load, it also kills whatever internet connection I've attempted on Safari. YouTube videos stop loading once App Store opens, for example.
Please help.
Thanks.

Timmy...
With multiple issues such as you are experiencing, use Lion Recovery

Does table load make the view INVALID

Similar Messages

Maybe you are looking for