Privacy settings for my photos aren't working.

Whenever I want to send a picture on facebook, twitter, instagram, etc. It always tells me to enable the app to use photos through settings > privacy > photos. Now whenever I go to settings > privacy > photos, it never shows me the app to enable it, and I don't know what to do. I never had this problem before.

if its on the phone then just scroll down till you see it if you still dont then hard reset the iphone, hold down both home and power button untill apple logo shows and retry if that does not work go into settings general and reset then click reset all settings and go back and check it at that point if its still not working you will need to connect to itunes and restore the ios sw on the iphone

Similar Messages

Okay I wanted to upload a photo to instagram but i could'nt because it said that I had to go to privacy settings go to photos and turn on the instagram app but there wasnt any app to switch to on amda i dont know what to do can anyone help me?

Okay I wanted to upload a photo to instagram but i could'nt because it said that I had to go to privacy settings go to photos and turn on the instagram app but there wasnt any app to switch to on amda i dont know what to do can anyone help me?

I also have the ios7 and before i upgraded it it worked fine

Book - best settings for best photo quality

What are the best settings for my photos in order to get the best quality book?
Thanks
Zasa

zasa:
Use the largest file, pixel wise, that you can. The books are printed at 300 dpi so the largest size the better to insure you'll get as close to that dpi for the largest page picture possible.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Make Flash Plug-In for Firefox Remember Privacy Settings for Camera and Mic Access on Local File

My company is using Flash Player to develop some kiosk-style applications to run on a standalone computer (no network connection). This computer will contain web pages containing Flash content. They will be opened from the local HD with Firefox with the Adobe Flash plug-in (v11.7.700.224). One of the applications accesses the microphone hooked up to the computer. When this application is started, it always asks for permission for "local" to access the microphone and camera. In previous versions of our system, we could click "Remember" if we did it once and that would make it so it wouldn't ask for permissions again (in this case, the Remember option isn't available, and the site settings don't even offer the Privace tab). However, in the previous case, we were running IE with a previous ActiveX Flash version (unfortunately, this approach is no longer available as we have had to switch to Windows 8 and that changes the game with IE and Flash entirely).
At this point, we have tried to use the Global Settings for "Camera and Microphone Settings by Site..." to enter "Local" as an always allowed site. This does not seem to have any effect. We also tried entering the root directory of the applications in "Trusted Location Settings", but that also seemed to have no effect.
I'm not sure what has fundamentally changed here. I think there might be some differences in the Plug-In version (compared to ActiveX), but I'm not sure what they might be or how to do the same thing as before.
Any help would be appreciated. Thanks in advance.
Torrey

Chris,
We learned that the Privacy tab (in Settings) can be found under the Flash plug-in for Firefox, but only if Firefox is running under an administrator.
Unfortunately, we haven't had much luck with the mms.cfg file. The following was used in the mms.cfg file (placed in both the %WINDIR%\SysWow64\Macromed\Flash and %WINDIR%\System32\Macromed\Flash” directories):
AVHardwareDisable = 0
AVHardwareEnabledDomain = local
AVHardwareEnabledDomain = 127.0.0.1
AVHardwareEnabledDomain = localhost
AutoUpdateDisable = 1
The AVHardwareEnabledDomain settings seem to be getting ignored regardless of whether the user is a standard user or an administrator. I also checked to make sure it wasn't just a local problem by going to a website that uses a microphone (http://www.testden.com/accent-reduction/systemcheck.htm). Adding the requested domain to the list (AVHardwareEnabledDomain = train.act360.com) still didn't bypass the allow/deny dialog box.
We know that the mms.cfg file is being read because setting "AVHardwareDisable = 1" will result in no prompt and that section being greyed out in Global Settings. I saw a post that suggested this setting was required to even make the AVHardwareEnabledDomain work, but it seems to block the local entirely and still brings up the dialog query on the internet site.
Thanks,
Torrey

Disable Privacy Settings for Local Application

Hi,
Is there a configuration / policy file that can be used on a
user's local machine to disable the privacy settings dialog that
pops up asking "Allow / Deny" for a Microphone?
Our application is distributed on the client from an
installer that must be run with administrative rights, I need to
find a way to disable this from showing since the user is
implicitly allowing us access to their microphone; after all the
software is developed specifically for audio recording.
Thank you,
- Justin

Chris,
We learned that the Privacy tab (in Settings) can be found under the Flash plug-in for Firefox, but only if Firefox is running under an administrator.
Unfortunately, we haven't had much luck with the mms.cfg file. The following was used in the mms.cfg file (placed in both the %WINDIR%\SysWow64\Macromed\Flash and %WINDIR%\System32\Macromed\Flash” directories):
AVHardwareDisable = 0
AVHardwareEnabledDomain = local
AVHardwareEnabledDomain = 127.0.0.1
AVHardwareEnabledDomain = localhost
AutoUpdateDisable = 1
The AVHardwareEnabledDomain settings seem to be getting ignored regardless of whether the user is a standard user or an administrator. I also checked to make sure it wasn't just a local problem by going to a website that uses a microphone (http://www.testden.com/accent-reduction/systemcheck.htm). Adding the requested domain to the list (AVHardwareEnabledDomain = train.act360.com) still didn't bypass the allow/deny dialog box.
We know that the mms.cfg file is being read because setting "AVHardwareDisable = 1" will result in no prompt and that section being greyed out in Global Settings. I saw a post that suggested this setting was required to even make the AVHardwareEnabledDomain work, but it seems to block the local entirely and still brings up the dialog query on the internet site.
Thanks,
Torrey

How can I edit the privacy settings for my daughters Apple ID.

My daughter has forgotten her privacy settings. She has $80 in credit and would like to use them. How can she edit her privacy settings?

What do you mean by 'privacy settings' ?
If you mean the Settings > General > Restrictions passcode on her iPad then was it on the iPad when she last backed up ? If not then she can restore to that backup and it should be removed. If it was on the iPad when she last backed up then the only way to remove it is to reset the iPad back to factory defaults and she can then re-sync your content back to her iPad - she won't be able to restore to the backup as that will keep the code in place.
If you mean the answers to her security questions, then if she has a rescue email address (which is not the same thing as an alternate email address) on her account then the steps on this page will give you a reset link on her account : http://support.apple.com/kb/HT6170
If she doesn't have a rescue email address (she won't be able to add one until she can answer her questions) then sher will need to contact Support in her country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if she doesn't already have a rescue email address) sher can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
If you mean something else ... ?

XCM Settings for IPC 6.0 to work with B2B ERP 6.0 E-commerce application

Hi All,
We are currently implementing B2B ERP (ECC 6.0) E-commerce using IPC 6.0 for the sales pricing and configuration needs.
To make IPC work with B2B E-commerce application I need to do the necessary XCM settings for IPC. I launched the following URL to do the XCM settings for IPC. http://<hostname>:<portnumber>/ipc/admin/xcm/init.do I created a JCO connection with ECC system using the menupath Components->Customer->JCO and adding values to required fields such as Base Configuration (value: server_connect) , Server, Client, Message Server, Userid and Password. I saved the configuration to create the necessary JCO connection with the ECC system. I executed the "Run Test" option and found the test to be successful.
To complete the Application Specific settings in XCM, I followed the menupath 'Application Configurations->SAP->erp' to create a new customer configuration. In the field JCODATA of the new configuration I added the JCO component name that was created in the previous step. I made this as the default configuration and saved it. The new configuration shows up under the sub-node Application Configurations->Customer-> 'New Configuration Name'.
Please let me know do I need to do any other XCM settings for IPC? Is there anything missing or need to be rectified? How I can test and make sure that IPC is connected to ECC and ERP E-commerce application and the connection is working fine. Please answer in detail.
Thanks in advance.
--R D

Hi,
Go to B2B XCM application : http://host:port/zb2b/admin/index.jsp
select "Extended Configuration Management (XCM) Administration"
then select your application configuration from the "Customer" node.
Click on the "Display" button.
then maintain "ipcdata" parameter as what you have maintained in the IPC application.
Thanks,
Dinesh.

GPO for changing privacy settings for Internet Zone

Hi I want to change the privacy setting for the Internet Zone from Medium to Low. Can't seem to find the right location in the GP. Can someone please point me in the right direction.

Hi,
If we want to change the privacy setting for the Internet Zone from Medium to Low via Group Policy, please navigate to
User Configuration - Windows Settings - Internet Explorer Maintenance – Security
in GPMC. On the right-pane, please double-click Security Zones and Content Ratings. On the dialog box, we should choose "Import the current security zones and privacy settings" under
Security Zones ad Privacy and click Modify Settings
to modify the level.
The article Ravikumar provided is very useful to us for configuring the settings via Group Policy, please also refer to it.
Regards,
Andy
Using IE maintenance is the old way which I don´t recommend when implementing IE9 or newer. I wonder, why there is no way to configure this with traditional GPO?

Privacy settings for Online Number

Hello,
I'm trying to change the privacy settings in my account from Only Skype Contacts to Anybody so I will be able to receive calls to my Skype Online number from friends and family.
Everytime I do it after a few minutes it goes back to Only Skype Contacts on its own....
How can I make this change permanent so I can get calls from Anybody to my Online number.
Please help
Pri

Pls I want t o know reason why I cannot recharge my account anymore.

Apps have no access to photos and do not show up in privacy settings for me to change it!

Hey Everyone I really could use some help! Ok so I recently got sent a replacement iphone 4 in the mail. I backed up the old iphone 4 and transfered that information over to the new one NO PROBLEM. I downloaded my apps no problem either BUT here is my question. My apps such as facebook, twitter, and instagram do not have access to my photos. When i go to settings > privacy > photos NONE of the apps show up and they also dont show up under anything else in the privacy part like contacts for snapchat to use (which doesnt work either). My restrictions are enabled and my photos and everything else under there are selected to ALLOW changes. I have tried resetting the location and privacy as well and still the apps will not show up under privacy so I can give them access. Its very frustrating to not be able to use the apps. SOMEONE PLEASE HELP! Also i have tried deleting and reinstalling the apps that hasnt worked either

Make sure that you have Include Photos from Subfolders checked

I just signed up for Netlix...they offered in the "opt out" privacy settings, for me to download, for Firefox users, the Network Advertising Initiative, NAI,..how do I uninstall this, in simple directions please. use my email naumoff@email.unc.edu

The NAI came to me while in privacy opt out setting signing up for Netflix...I need to uninstall it...I can't find where to do that on my computer. Need simple directions. use email: [email protected] as NAI is strangling my computer and takes forever even on your site, to load a page.

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

Best settings for saving photos to help reduce duplicating pictures and clogging my storage

Hi Everyone, i have finally bought myself an imac and loving it already.
The support community has been great as I have founds alot of useful info that has helped me in the set up of my new imac.
but I have found a problem i never knew i had....
The problem which was highlighted after migrating my PC files over to the imac was the number of photos i had. it was a ridiculus amount. When i looked into it, it turns out many were duplicated, and even in triplicates.
I don't have any particular settings set up, i just always connected an automatically saved on my PC.
It will take me a while to review and delete the duplicates, i just want to ensure going forward that I don't continue to do the same, and i am hoping someone can help point out the right set up (settings) I should be looking at.
I will be looking to save photos from the following devices:
Canon EOS 550 - which i sometimes save photos direct onto my IPAD as well as saving to my PC (now my Imac)
Ipad - photos and videos
iphone - photos and video
I am probably not utlizing the icloud properly but I am sure there is an easier way to just get my devices saving the new photos and avoiding duplicating.
Any recommendations?

Hi Terence, yes it does. i just finished reading your post regarding iphoto and file saving.
i have quite alot of photos i migrated over, I have just sent the imported (it is still importing) the whole folder into iphoto.
it has already highlighted duplicates and i have clicked the do not import for duplicates now. the product i have is that there will still be duplicates in the original folder due to various sub folders. ( i know this is such a newbie thing to do).
i was thinking just move all photos out of the sub folders in one big foldered but didn't want to loss date info. ie when the photo was taking as i couldn't see any other dates attached to the file except for date added, date last used etc which all showed the date i migrated the photo.

Best security and privacy settings for Yosemite

I have recently upgraded to Yosemite and started thinking about security and privacy. So I had a look around hoping to find an article or something telling me what I should do to various settings to make sure that everything is okay. I did find some information but bits of it were beyond my understanding and I did want to do anything in case I messed anything up. Like I saw about FileVault but then went I went to use it I was asked if I wanted to use iCloud with it or not, but I didn't know which option to go for so I left it. Obviously I have a password and Firewall turned on but just wondering if there was anything else I can do to protect everythin. I also read that Apple gets a lot of information from web searches and such. I really do t like the thought of thar. Can I do anything. I'm sorry if this seems really basic but I would appreciate any advice anyone can give or point me in the direction of.

Privacy
Use built-in Private Browsing and DuckDuckGo search engine.
Protection
http://support.apple.com/kb/PH14365
http://www.thesafemac.com/mmg/
Best.

Settings For Adding Photos To Organiser - Elements 6

Hi folks,
I'm having a little trouble with adding photos to my organiser in Adobe Elemeents 6. What I want to be able to do is just to open the organiser and add the photos manually as per my own selection from my "My Pictures" folder.
What is happening is that I select the photos in My Pictures BUT when I go to the untagged photos it's actually pulled through the thumbnalis from the folder I originally held them when I was editing before I copied and pasted them to My Pictures.
Any thoughts on how I get to able to just retrieve manually from one place?
Thanks
Ian

Thanks for your reply.
Ok, i've tried a little test and what appears to be happening is this. When I download the images from my camera do not want to put them straight into "My Pictures". I download them to a different location first so that I can edit etc before I finally tranfer to "My Pictures". What appears to be happening is that the Organiser is locating them in both of the seperate files and taking a thumbnail from both. I'm ending up with two thumbnails per image. I know I can delete one of each every time but if I put loads of photos in it's a bit annoying.
I'm not using the Adobe photo download software to obtain my pictures from my cards, just the normal Microsoft Scanner/Card Reader software but I do not think this is the issue anyway.
Any ideas please?

Minimum NAT/firewall settings for iChat audio/video to work?

I've read the docs on teh ports and firewall issues but it is still unclear to me.
I have
1. An OS X Server 10.5.2 connected to the internet behind a router with NAT and running a firewall. NAT and of course the firewall are under my control. I've opened up the iChat Server SSL port (5223) on the OS X Server's firewall. I've put a 5223 redirect on the router to my OS X Server system. iChat is configured on this system and several users have permission to use iChat. The NAT table on the router is restricted, only ports I want to serve (e.g. 25, 22, 5223) are redirected to my server, the rest of incoming connections are blocked at the NAT (safer that way).
2. An OS X 10.5.2 client behind a NAT setup in another part of the world.
3. An OS X 10.5.2 client behind a NAT setup in another part of the world.
Both clients I can manage the firewall of the client, but I cannot manage anything on the router.
WIth this set up on both systems users have successfully connected to my OS X Server's iChat server using SSL. Text chat works. So I can assume that iChat Server works, that the permissions and login is OK, that SSL is OK.
But neither audio not video works. I cannot establish an audio or video connection because the connection fails. The iChat connection log says
2008-02-21 20:49:53 +0100: user@fqdn2: Error -8 (Did not receive a response from 0x18c09b30.)
there is nothing in appfirewall.log on the client.
The clients should work OK behind NAT. But my guess is that the server needs more than what I am giving it. However, I have been unable to find out what a minimum set of NAT redirects and firewall ports open is that would enable me to let these two clients do voice chat via my OS X Server at that other location.
Any tip for information on how to set up the server side minimally and safely would be welcome.
Thanks,
G

Hi,
Several things.
1) iChat server does in fact use an SSL Login on port 5223 (Tiger does not do the SSL but is still on the same port.
This does not allow the other data on port 5220 that the Jabber side of iChat needs.
Apple Doc http://docs.info.apple.com/article.html?artnum=93208 see item 6
2) It also ignores the fact iChat uses a completely different set of ports to the A/V Chat
So an AIM Login is port 5190 in those mentioned in item 6
port 5297, 5298 and 5353 are the Bonjour ones.
That leaves 5060, 5678, 16384-16403 for A/V chats in Tiger
5678, 16393-16402 in Leopard
The pics and Table are for Panther and Tiger. See the Table at the bottom http://www.ralphjohns.co.uk/pantherports.html
The changes from Tiger to Leopard in the port Usage for A/V chats is documented here http://docs.info.apple.com/article.html?artnum=306688 (Hence the none use of port 5060 and the smaller groupfor the actual A/V Chats)
3) Check out the two server forums for Leopard > iChat Server http://discussions.apple.com/forum.jspa?forumID=1235
And Tiger/OS X Server 10.4 > Collaboration Services http://discussions.apple.com/forum.jspa?forumID=700 as they maybe other issues that I am not aware of on the Server side.
So Leopard Jabber/iChat Server needs 14 ports
5220, 5222, 5223 on TCP and
5678, 16393-16402 on UDP
Tiger needs the A/V ports to include 5060 and extend the group to 20 ports (16384-16403)
I hope this helps.
8:44 PM Sunday; February 24, 2008

Privacy settings for my photos aren't working.

Similar Messages

Maybe you are looking for