Problem accessing sys table from user's schema

Hi,
I had a store procedure whose owner is say user1.Inside of that store procedure i am executing the following select query.
select * from sys.all_coloumns where owner = 'USER1';
This is resulting me "no data found".
When i am executing the same select query from SQL*plus it is giving me the proper output.
I think this is happening because of less systeme privileges/role assigned to schema USER1.
Can you please suggest which priviledges i need to grant, so that my proc. will work fine.

User1 needs select rights on sys.all_columns directly.
Not via the DBA role.

Similar Messages

Problem accessing systable data from user's schema

Hi,
I had a store procedure whose owner is say user1.Inside of that store procedure i am executing the following select query.
select * from sys.all_coloumns where owner = 'USER1';
This is resulting me "no data found".
When i am executing the same select query from SQL*plus it is giving me the proper output.
I think this is happening because of less systeme privileges/role assigned to schema USER1.
Can you please suggest which priviledges i need to grant, so that my proc. will work fine

If the procedure uses definer rights then the definer must have a direct grant on non-owned objects referenced in the procedure for whatever SQL activity is being performed.
HTH -- Mark D Powell --

Access SAP Tables from Java Program

Hi All,
We have a requirement to integrate attendance portal(which is done in java) with SAP.
Our problem is how to access SAP tables from a Java program?
Database is Sybase.
Please suggest us a good solution.
Thanks in advance...

Did you go through Sap Help?
Calling BAPIs from Java - BAPI User Guide CA-BFA) - SAP Library
Regards,
Philip.

How to export and import dependent tables from 2 different schema

I have a setup where schema1 has table 1 and schema 2 has table2. And table 1 from schema1 depends upon table 2 from schema 2.
I would like to export and import these tables only and not any other tables from these 2 schemas with all information like grants,constraints.
Also will there be same method for Oracle 10g R1,R2 and Oracle 11G.
http://download.oracle.com/docs/cd/B12037_01/server.101/b10825/dp_export.htm#i1007514
Looking at this For table mode it says
Also, as in schema exports, cross-schema references are not exported
Not sure what this means.
As I am interested in only 2 tables I think I need to use table mode. But if I try to run export with both tables names, it says table mode support only one schema at a time. Not sure then How would the constraints would get exported in that case.
-Rohit

worked for my 1st time I tried
exp file=table2.dmp tables="dbadmin.temp1,scott.emp"
Export: Release 10.2.0.1.0 - Production on Mon Mar 1 16:32:07 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: / as sysdba
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses WE8ISO8859P1 character set (possible charset conversion)
About to export specified tables via Conventional Path ...
Current user changed to DBADMIN
. . exporting table TEMP1 10 rows exported
EXP-00091: Exporting questionable statistics.
Current user changed to SCOTT
. . exporting table EMP 14 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics.
Export terminated successfully with warnings.

How can i import tables from a different schema into the existing relational model... to add these tables in the existing model? plss help

how can i import tables from a different schema into the existing relational model... to add these tables in the existing relational/logical model? plss help
note; I already have the relational/logical model ready from one schema... and I need to add few more tables to this relational/logical model
can I import the same way as I did previously??
but even if I do the same how can I add it in the model?? as the logical model has already been engineered..
please help ...
thanks

Hi,
Before you start, you should probably take a backup copy of your design (the .dmd file and associated folder), in case the update does not work out as you had hoped.
You need to use Import > Data Dictionary again, to start the Data Dictionary Import Wizard.
In step 1 use a suitable database connection that can access the relevant table definitions.
In step 2 select the schema (or schemas) to import. The "Import to" field in the lower left part of the main panel allows you to select which existing Relational Model to import into (or to specify that a new Relational Model is to be created).
In step 3 select the tables to import. (Note that if there are an Foreign Key constraints between the new tables and any tables you had previously imported, you should also include the previous tables, otherwise the Foreign Key constraints will not be imported.)
After the import itself has completed, the "Compare Models" dialog is displayed. This shows the differences between the model being imported and the previous state of the model, and allows you to select which changes are to be applied.
Just selecting the Merge button should apply all the additions and changes in the new import.
Having updated your Relational Model, you can then update your Logical Model. To do this you repeat the "Engineer to Logical Model". This displays the "Engineer to Logical Model" dialog, which shows the changes which will be applied to the Logical Model, and allows you to select which changes are to be applied.
Just selecting the Engineer button should apply all the additions and changes.
I hope this helps you achieve what you want.
David

How do you join two tables from different Oracle schemas using a subquery

I am trying to join two tables from different Oracle schemas using a subquery. I can extract data from each of the tables without a problem. However, when I combine the select statements using a subquery I get the Oracle error *'ORA-00936: missing expression'*. Since each SELECT statement executes on its own without error I don't understand what is missing. The result set I am trying to get is to match up the LINE_ID from PDTABLE_12_1 in schema DD_12809 with the MAT_DESCRIPTION from table PDTABLE_201 in schema RA_12809.
The query is as follows:
sql = "SELECT [DD_12809].[PDTABLE_12_1].LINE_ID FROM [DD_12809].[PDTABLE_12_1] JOIN " _
+ "(SELECT [RA_12809].[PDTABLE_201].MAT_DESCRIPTION " _
+ "FROM [RA_12809].[PDTABLE_201]) AS FAB " _
+ "ON [DD_12809].[PDTABLE_12_1].PIPING_MATER_CLASS = FAB.PIPING_MATER_CLASS"
The format of the query is copied from a SQL programming manual.
I also tried executing the query using a straight JOIN on the two tables but got the same results. Any insight would be helpful. Thanks!
Edited by: user11338343 on Oct 19, 2009 6:55 AM

I believe you are receiving the error because you are trying to JOIN on a column that doesn't exist. For example you are trying to join on FAB.PIPING_MATER_CLASS but that column does not exist in the subquery.
If you want to do a straight join without a subquery you could do the following
SELECT DD_12809.PDTABLE_12_1.LINE_ID
,       FAB.MAT_DESCRIPTION
FROM    DD_12809.PDTABLE_12_1
JOIN    RA_12809.PDTABLE_201    AS FAB ON DD_12809.PDTABLE_12_1.PIPING_MATER_CLASS = FAB.PIPING_MATER_CLASS HTH!

Accessing V$tables from within OO4O

When trying to access the V$ tables (ie. V$SQLTEXT)
by using the OO4O interface I get the error
ORA-03106 Fatal two task communication protocol error
when accessing 'ordinary' tables (ie. EMPLOYEES) the
error does not accor
any ideas on this one?
null

Hi Anil,
I can only answer 1. and 2. (and would be interested into 3. as well):
1.
Yes you can access tables from a different schema and also HANA views. In this case no 'using' is needed.
Examples:
    RESULT = SELECT
    FROM
          "SAP_ECC"."T441V" AS t,
          "_SYS_BIC"."tmp.package/AFPO" AS a.
    WHERE ...
2. In this case, if you need schema mapping: You could use HANA (projection) views which just forward to a different schema, also see example.
Best regards,
Christoph

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel?

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Accessing dictionary tables from dynpro?

Hi all
As far as i know, there are 4 approches to access dictionary tables from webdynpro.
-entity bean
-sqlj
-jdbc
what are the advantages and disadvantages for all above?
and which one to go for?

Hi swathi
See the persistence API--Adv and Disadvantages what ever you mentioned come under the persistence API
Relational Persistence
=================
SQL-based coding: expressive!
SQLJ: for static SQL, checked at design time,
recommended
JDBC: for dynamic SQL, can be combined with SQLJ
=======================
Object-relational Persistence
======================
SQL-free! Portable!
JDO: light-weight object persistence, Java-like dynamic
query language
EJB CMP: part of J2EE standard, relatively heavy-weight,SQL-like static query language
Regards,
Venkata Kalyan Karanam

Can we access PI tables from WebDynpro Java via PI 7.1?

Hi Experts
Is it possible to fetch PI Tables (to display monitoring and alerts as dashboard on portal) from Java Stack. I got some javadocs API SAP Netweaver for PI 7.1 but i don't know how far it can help me in solving my purpose of fetching and displaying the PI monitoring data on Portal.
https://www.sdn.sap.com/irj/sdn/javadocs
Please advise if J2EE access to PI Tables is possible or RFC is the suggested solution to fetch PI Monitoring data.
Thanks
Neha

Hi Neha,
You can access PI tables from Webdynpro Java application using RFC or Webservices. Create RFC or Webservices which will fetch data from the PI tables.Create the required JCO's and the Webdynpro java application which uses the Adaptive RFC model or Adaptive Webservice Model to connect to the ECC system.
I found a document that speaks about fetching data from SXMB_MONI Standard Table https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b050ff4f-84c3-2b10-3d99-8f9c44f57a17
Hope this is useful.
Regards,
Seema Rane.

Why compilation error--when trying to access the table from itcsi schema

Hi,
when querying the table from itcsi.app iam able to see the data but used in proc saying invalid table name. Whats the problem
when declared p_app_i_old app.app_i%type----It is throwing pls-00201 error
1 Create or replace procedure Test_insert(p_app_i_old integer,
2 p_app_i_new integer,
3 p_APP_ISAC_CPT_I varchar2)
4 is
5 cursor c1 is
6 select distinct table_name,owner
7 from all_tab_columns
8 where owner = 'ITCSI' and column_name='APP_I';
9 t_tablename varchar2(25);
10 t_string varchar2(300);
11 t_num number;
12 Begin
13 For c2 in c1 loop
14 t_num := 0;
15 t_string := 'SELECT count(*) FROM ' || c2.owner ||'.'||c2.table_name||' WHERE APP_I = '||p_
16 execute immediate t_string into t_num;
17 if t_num > 0 then
18 -- dbms_output.put_line('The table name is '||c1_rec.table_name);
19 if c2.Table_name = 'APP' Then
20 INSERT INTO itcsi.App
21 SELECT p_app_i_new,
22 app_acrnym_c,
23 app_x,
24 app_desc_t,
25 app_ipads_t,
26 app_prdcn_stat_t,
27 app_prdcn_stat_d,
28 app_isd_tier_c,
29 app_bus_cont_c,
30 app_extnl_cstm_c,
31 app-ecrpt_lvl_c,
32 app_isac_cpt_i,
33 dsw_gpn_i,
34 ed_cntnt_srce_t,
35 usr_upd_uunm_i,
36 ed_upd_m
37 FROM itcsi.APP
38 WHERE app_i = p_app_i_old;
39 elsif c2.Table_name = 'APP_CETRN' Then
40 Insert into itcsi.APP_CETRN
41 select p_app_i_new,
42 app_cetrn_i,
43 app-curr_cmplnc_t,
44 app_rqr_cmplnc_t,
45 dsw_gpn_i,
46 ed_cntnt_srce_t,
47 usr_upd_uunm_i,
48 ed_upd_m
49 FROM itcsi.APP_CETRN
50 WHERE app_i = p_app_i_old;
51 elsif c2.Table_name = 'APP_GPC' Then
52 Insert into itcsi.APP_GPC
53 select p_app_i_new,
54 gpc_dpnt_x,
55 gpc_elemy_x,
56 pro_i,
57 dsw_gpn_i,
58 ed_cntnt_srce_t,
59 usr_usr_upd_uunm
60 FROM itcsi.APP_GPC
61 WHERE app_i = p_app_i_old;
62 End if;
63 End if;
64 End loop;
65 --Commit;
66* End;
SQL> /
Warning: Procedure created with compilation errors.
SQL> show errors
Errors for PROCEDURE TEST_INSERT:
LINE/COL ERROR
20/2 PL/SQL: SQL Statement ignored
37/23 PL/SQL: ORA-00942: table or view does not exist
40/2 PL/SQL: SQL Statement ignored
Thanks

how do i check the grant?
if am in my own schema,how do i connect to itcsi
schema?if you are using a schema other than the ITCSI schema, you need to login as ITCSI. or if you have dba user account you can grant a privilege of
GRANT ALL on ITCSI.APPS to <other SCHEMA>;

Problem creating a form on a table from another custom schema

Hi,
I have a table in a custom schema that i have granted SELECT, UPDATE, INSERT and DELETE to our apex schema. I have created a synonym for this table under the apex schema but I can't build a form for it. If i try adding the form when creating the application, it gives me an error about not having a primary key on the table, which i do. If i create the application with a blank page and then try to add the form, it gives me an error that the table must contain at least one column, which it contains 12. If i view the table in the SQL Workshop, it gives an accurate count of rows in the table but doesn't provide any information about the table and doesn't display the data.
If I login to TOAD under our apex schema and view the synonym object, i can see all of the information about the table - the columns, the primary key, etc. But I can't see it inside the Application Express app.
Can anyone tell me why this is and what i can do to build a form on this shared table?
Thanks,
Troy

Troy,
I suggest you get rid of the synonym and then don't use the Create Application wizard for this purpose. Instead, create the application, then use a create page or create form wizard. It should first ask you for the name of the schema that contains the table. If you get that far, you should be on your way.
Scott

Showing tables from the right schema in Visual Studio Server Explorer

Hi,
I have a 10g Oracle database with quite a few schemas. My user id has access to all these schemas. Once I am connected to the database using the connection string stored in Web.Config, I am able to do CRUD operations on any table in the database through code. What I want to do is, in the Server Explorer of Visual Studio 2008, create a connection to the database so that I can see all the objects in the Explorer. Though the connection is successful, the problem is the tables and other objects shown in the explorer is not from the schema I want. How would I display the objects from the right schema in the database in Visual Studio Server Explorer? In other words, how would I tell the Server Explorer to display objects from a specific schema? Any help is hightly appreciated. Thanks.
Babu.

Hi,
About Visual Studio Server Explorer – Azure resources, we can get detail information from this blog, the blog link is:
http://blog.ict.eu/2013/09/visual-studio-server-explorer-azure-resources/
Cloud Services
First all Cloud Services are listed. For each Cloud Service the Production and Staging deployment slots are listed as well as the instances within a deployment.
But we didn’t find all cloud services from VS Server Explorer, I reproduce the same issue (the health cloud service didn't list in the VS Server Explorer), we can try to submit this via
http://blogs.msdn.com/b/jnak/archive/2008/10/27/submitting-a-bug-against-the-windows-azure-tools-and-sdk.aspx?Redirected=true
Thank you for your posting!
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

MapViewer metadata problem - accessing spatial data in a different schema.

I have a MapViewer application that uses data from three different schemas.
1. Dynamic Themes come from schema A.
2. Static Themes come from schema B.
3. A newly added static theme in B whose data comes from schema C.
The mapviewer datasource points to schema B where the static themes, data and metadata are defined while the dynamic themes have their own datasource specified as part of addJDBCTheme(...).
To get the newly added map to work I've had to add a view in schema B that points to C instead of referencing directly the table and I've had to add the metadata twice, once for schema B and once for schema C.
If I put the metadata in just one of the two schemas I get the following errors.
08/11/21 13:58:57 ERROR [oracle.sdovis.ThemeTable] cannot find entry in ALL_SDO_GEOM_METADATA table for theme: AMBITOS_REST
08/11/21 13:58:57 ERROR [oracle.sdovis.ThemeTable] java.sql.SQLException: Invalid column index
OR
08/11/21 13:53:39 ERROR [oracle.sdovis.theme.pgtp] java.sql.SQLException: ORA-29902: error in executing ODCIIndexStart() routine
ORA-13203: failed to read USER_SDO_GEOM_METADATA view
It's not a big deal but I'd like to know if anyone else has has similar problems.
Saludos,
Lew.
Edited by: Lew2 on Nov 21, 2008 6:42 AM

Hi Lew,
if you are using a recent version (10.1.3.1 or later) there is no need to use a view and to create the metadata in both schemas.
You need to grant selection on tables between the schemas.
You can try the following. Assume you have the MVDEMO schema (from MapViewer kit) and SCOTT schema.
1) grant select on MVDEMO Counties table to SCOTT
SQL> grant select on counties to scott;
2) Now you are ready to create a predefined theme in schema SCOTT using the MVDEMO Counties table.
- Open MapBuilder and loads the SCOTT schema.
- On the Data navigator (bottom left tree), go to Geometry tables and you should see the MVDEMO node and the COUNTIES node inside it.
- Start a wizard to create a geometry theme based on this Counties table.
- At the end you should see that the base table name is MVDEMO.COUNTIES. Therefore MapViewer will use the metadata in MVDEMO schema and there is no need to replicate it in SCOTT schema.
Joao

How to access ucm table from external application?

Hi All.
Is it possible to access an ucm table (configuration manager-> tables) from of the other external application?
If yes, how to do it?
Regards,
Diovani

It's just another DB table so JDBC would work fine.
You can connect to the UCM schema using a free tool like Oracle SQLDeveloper and look at the tables this alos uses a JDBC connection.
HOWEVER
I would not really recommend you use this approach without knowing a lot more. Certainly you should not have an external application making changes to the UCM DB. If you just want to read data SQL over JDBC is fine
BUT
It is better really to use the existing UCM services to access the data - if there is not a service that does what you want then you create it. This keeps you within the same design pattern of UCM and means you can continue to benefit from security and other rich services that UCM provides over and obove JDBC
Tim

Problem accessing sys table from user's schema

Similar Messages

Maybe you are looking for